Shape‐memory polymers (SMP) are versatile stimuli‐responsive materials that can switch, upon stimulation, from a temporary to a permanent shape. This advanced functionality makes SMP suitable and promising materials for diverse technological applications, including the fabrication of smart biomedical devices. In this paper, advances in the design of SMP are discussed, with emphasis on materials investigated for medical applications. Future directions necessary to bring SMP closer to their clinical application are also highlighted.
Micelles made from linear polystyrene‐block‐polyisoprene (PS/PI) in decane are spherical. The differences in the structure of micelles made from linear and cyclic PS/PI were investigated using small‐angle X‐ray scattering at rest and under shear flow. The effect of shear revealed that micelles made from cyclic copolymer chains have an elongated shape, which was confirmed by transmission electron microscopy. The cyclization of diblock copolymer chains is thus a new method to control the micellar morphology.
A simple method using water‐soluble conjugated polymers and a DNA intercalator has been proposed for single base pair mismatch detection with enhanced detection efficiency. Fluorescence resonance energy transfer (FRET) was used as an indicator for unwinding of dsDNA due to base pair mismatch at elevated temperatures. The optical amplification effect of the CPs helps to achieve enhanced detection efficiency.
Tertiary amines were found to remarkably enhance the catalytic activity of ATRP catalysts CuBr/tris[(2‐pyridyl)methyl]amine and CuBr/tris[2‐(dimethylamino)ethylamine]. These two catalysts alone failed to polymerize MA, MMA, and styrene at reduced catalyst concentrations. With tertiary amines such as triethylamine both catalysts could mediate fast polymerizations of the three monomers in a controlled manner at as low as 1 mol‐% catalyst relative to initiator. A mechanism study showed that tertiary amines reduced copper(II) complexes to active copper(I) complexes.
Summary: We report a new method for the preparation of polyaniline nanoballs by using HAuCl4 as an oxidizing agent. During the reaction, aniline is oxidized and forms polyaniline whilst the hydrogen tetrachloroaurate is reduced and forms gold nanoparticles. These gold nanoparticles are found to decorate the nanoballs.
The resultant precipitate and corresponding TEM image of the gold‐nanoparticle covered polyaniline nanoball. 相似文献
Summary: Polyaniline nanobelts have been synthesized by a self‐assembly process using the chemical oxidative polymerization of aniline in a surfactant gel. The morphologies of polyaniline nanostructures were characterized by field‐emission scanning electron microscopy and transmission electron microscopy. The effects of the concentrations of cetyltrimethylammonium bromide on the morphologies of polyaniline nanostructures have also been investigated.
A scanning electron microscopy image of polyaniline nanobelts synthesized with 0.12 M cetyltrimethylammonium bromide at −7 °C. 相似文献
The computer‐aided design of polymers is one of the holy grails of modern chemical informatics and of significant interest for a number of communities in polymer science. This paper outlines a vision for the in silico design of polymers and presents an information model based on modern semantic web technologies, thus laying the foundations for achieving the vision.
Synthesis of a water‐soluble polydiacetylene has been achieved by topochemical polymerization in the solid state of the bis(N‐methylimidazolium)diacetylene monomer. Structural characterization for the monomer by X‐ray diffraction and NMR spectroscopy supports a photopolymerization initiated at the surface. Characterization of the polymer (NMR, UV and Raman spectroscopy, and dynamic light scattering) is given along with a molecular modelling interpretation of the polymerization in the solid state.
Optically active polymer containing P‐stereogenic bisphosphine as a repeating unit in the main was successfully synthesized. A coordinated borane on the phosphorus atom could be completely removed by an organic base under mild condition, and the successive reaction with Pd afforded the corresponding polymer complex. The chirality of P‐stereogenic centers was transferred to the m‐phenylene‐ethynylene linkers by complexation because of the prohibition of the rotary motion of the bisphosphine‐Pd unit.
Ferrocenylmethyl methacrylate (FMMA) is one of the very few metallocene‐based monomers that are promising candidates for truly living anionic polymerization. Nevertheless, FMMA homopolymers with a narrow polydispersity, or block copolymerization studies that result in satisfying blocking efficiencies, are unknown so far. Here we describe a procedure that leads to highly regular FMMA‐based polymers for the first time, characterized by polydispersity indices (PDI) of less that 1.05 and very high blocking efficiencies (>95%) in sequential copolymerization with styrene. Some of the obtained poly[styrene‐block‐(ferrocenylmethyl methacrylate)]s show unusual microphase morphologies, presumably the consequence of high Tgs causing ‘frustrated’ non‐equilibrium states.
A method for the preparation of well‐defined crystallites of MgCl2‐supported Ziegler‐Natta catalysts on Si wafers has been developed. This has been achieved by the spin‐coating of a MgCl2 solution onto a flat Si wafer, followed by controlled crystal growth to give well‐defined MgCl2 · nEtOH crystallites. The growth of the crystallites on the flat silica facilitates their characterization using electron and scanning probe microscopy. The relative proportions of 120° and 90° edge angles indicate the preference for the formation of a particular crystallite face for the MgCl2. Polyethylene has been identified to be formed on the lateral faces of the crystallite.
A new approach for the synthesis of polyaniline (PANI) nanostructures under UV light illumination has been developed, which is the first report of a templateless chemical process for preparing pure PANI nanowires. The acceleration effect of photo‐assistance on the polymerization can promote the homogeneous nucleation and elongation of the nanofibers and nanowires, leading to easy preparation of tunable diameters of the nanowires and nanofibers of PANI.
Addition polymerization of norbornene was performed with several pyridine bis(imine) cobalt dichloride complexes activated with methylaluminoxane (MAO), first described for ethylene polymerization. For the first time, norbornene was also polymerized with CoCl2 associated to MAO. The influence of several reaction parameters has been investigated. Quite different behavior was observed compared with ethylene polymerization. Moreover, the copolymerization of ethylene and norbornene with these complexes was not possible but led to a mixture of both homopolymers.
The pyridine bis(imine) cobalt dichloride complexes used in this study. 相似文献
A PDA based sensor, derived from a di‐(2‐picolyl) amine (DPA) substituted diacetylene monomer, displayed a selective colorimetric change and a large fluorescence enhancement in the presence of lead ions. The lead selective PDA‐based chemosensor enabled easy detection of the presence of lead in 100% aqueous solution by the naked‐eye.
In light of the increasing demand for ultra rapid and mild conjugation chemistries for use in macromolecular chemistry, the present Feature Article provides a critical overview of the very latest developments in this field. The principal aim, therefore, is the provision of a quick selection guide to aid in the formulation of a design strategy for novel functional materials and to provide recommendations for future developments in the chemistries discussed.
Summary: A chiral, regioregular poly[3‐(4‐alkoxyphenyl)thiophene] has been prepared and studied. Films prepared by fast evaporation of the solvent, consist of random‐coils, while films prepared by slow evaporation are composed of chirally aggregated, coplanar strands. Heat treatment transforms the random‐coils into aggregated films via an intermediate state, which was characterized as chiral, coplanar, unaggregated polymer strands.
Overview of the possible aggregation processes. 相似文献
Summary: Polypyrrole nanotubes with high electric conductivity and azo function have been fabricated in high yield via an in‐situ polymerization. During the process fibrillar complex of FeCl3 and methyl orange (MO), acting as a reactive self‐degraded template, directed the growth of polypyrrole on its surface and promoted the assembly into hollow nanotubular structures.
TEM image of uncompleted PPy nanotubes synthesized in MO solutions after reaction for 40 min. 相似文献
