Chemically Stable Covalent Organic Framework (COF)‐Polybenzimidazole Hybrid Membranes: Enhanced Gas Separation through Pore Modulation

Highly flexible, TpPa‐1@PBI‐BuI and TpBD@PBI‐BuI hybrid membranes based on chemically stable covalent organic frameworks (COFs) could be obtained with the polymer. The loading obtained was substantially higher (50 %) than generally observed with MOFs. These hybrid membranes show an exciting enhancement in permeability (about sevenfold) with appreciable separation factors for CO₂/N₂ and CO₂/CH₄. Further, we found that with COF pore modulation, the gas permeability can be systematically enhanced.     

Azine‐Linked Covalent Organic Framework (COF)‐Based Mixed‐Matrix Membranes for CO2/CH4 Separation

Mixed‐matrix membranes (MMMs) comprising Matrimid and a microporous azine‐linked covalent organic frameworks (ACOF‐1) were prepared and tested in the separation of CO₂ from an equimolar CO₂/CH₄ mixture. The COF‐based MMMs show a more than doubling of the CO₂ permeability upon 16 wt % ACOF‐1 loading together with a slight increase in selectivity compared to the bare polymer. These results show the potential of COFs in the preparation of MMMs.     

Thermally Rearranged Polymer Membranes Containing Tröger's Base Units Have Exceptional Performance for Air Separations

The influence of segmental chain motion on the gas separation performance of thermally rearranged (TR) polymer membranes is established for TR polybenzoxazoles featuring Tröger's base (TB) monomer subunits as exceptionally rigid sites of contortion along the polymer backbone. These polymers are accessed from solution‐processable ortho‐acetate functionalized polyimides, which are readily synthesized as high‐molecular‐weight polymers for membrane casting. We find that thermal rearrangement leads to a small increase in d‐spacing between polymer chains and a dramatic pore‐network reconfiguration that increases both membrane permeability and O₂/N₂ selectivity, putting its performance above the 2015 upper bound.     

Mixed matrix membrane comprising polyimide with crystalline porous imide‐linked covalent organic framework for N2/O2 separation

An imide‐linked covalent organic framework (COF) was successfully synthesized by directly heating a mixture of melamine and biphenyltetracarboxylic dianhydride (BPDA) in a tubular oven at 335°C. The crystalline and nanostructure of this COF was characterized by X‐ray diffraction (XRD) and Brunauer‐Emmett‐Teller (BET). A mixed matrix membrane (MMM) was prepared by blending the COF into the commercial P84 polyimide in solution. It is found that the COF particles not only act as gas channels for N₂ and O₂ permeation but also provided an inverse permselective property with higher permeability of N₂. The effect of COF nanostructure and its loading amount on N₂ and O₂ permeability and selectivity has been investigated.     

Thermal treatment of dense polyimide membranes

A study has been conducted to clarify the relationship between polymer structure, annealing temperature, and the extent of plasticization by high‐pressure CO₂ for two typical polyimide membranes; BTDA‐DAPI (poly(3,3′‐4,4′‐benzophenone tetracarboxylic–dianhydride diaminophenylindane) and 6FDA‐TMPDA (poly(2,2′‐bis(3,4′‐dicasrboxyphenyl) hexafluoropropane dianhydride–2,3,5,6‐tetramethyl‐1,4‐phenylenediamine). Both membrane materials are exposed to varying levels of thermal annealing at 200 and 250 °C. The effect of this heat treatment on free volume is examined using positron annihilation lifetime spectroscopy (PALS), whereas fluorescence spectroscopy is used to monitor changes in electronic structure. Results show that thermal annealing causes a reduction in both the size and number of free volume elements. A strong relationship is found between the fluorescence peak intensity for 6FDA‐TMPDA and both the membrane gas permeability and plasticization pressure. This correlation is most likely the result of the formation of charge transfer complexes, particularly at 250 °C. However, the formation of covalent crosslinks at these temperatures cannot be discounted. No fluorescence is observed for BTDI‐DAPI. Although thermal annealing has a significant effect on the extent of plasticization in both polymers, it is found that the rate of plasticization is unaffected by the annealing temperature. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1879–1890, 2008     

Synthesis and gas permeation properties of poly(diarylacetylene)s having substituted and twisted biphenyl moieties

Diarylacetylene monomers containing substituted biphenyl ( 1a – f ) and anthryl ( 1g ) groups were synthesized and then polymerized with TaCl₅‐n‐Bu₄Sn catalyst to produce the corresponding poly(diarylacetylene)s ( 2a – g ). Polymers 2a – f were soluble in common organic solvents such as cyclohexane, toluene, and chloroform. According to thermogravimetric analysis, the onset temperatures of weight loss of the polymers were over 400 °C in air, indicating considerably high thermal stability. Free‐standing membranes 2a and 2c – e were prepared by the solution casting method. Desilylation of Si‐containing membrane 2c was carried out with trifluoroacetic acid to afford 3c . All the polymer membranes, especially those having twisted biphenyl groups, exhibited high gas permeability; for example, their oxygen permeability (PO ₂) values ranged from 130 to 1400 barrers. Membrane 2d having two chlorine atoms in the biphenyl group showed the highest gas permeability (PO ₂ = 1400 barrers) among the present polymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 861–868, 2010     

A novel pathogen detection system based on high‐resolution CE‐SSCP using a triblock copolymer matrix

Although CE‐SSCP analysis combined with 16S ribosomal RNA gene‐specific PCR has enormous potential as a simple and versatile pathogen detection technique, low resolution of CE‐SSCP causes the limited application. Among the experimental conditions affecting the resolution, the polymer matrix is considered to be most critical to improve the resolution of CE‐SSCP analysis. However, due to the peak broadening caused by the interaction between hydrophobic moiety of polymer matrices and DNA, conventional polymer matrices are not ideal for CE‐SSCP analysis. A poly(ethyleneoxide)‐poly(propyleneoxide)‐poly(ethyleneoxide) (PEO‐PPO‐PEO) triblock copolymer, with dynamic coating ability and a propensity to form micelles to minimize exposure of hydrophobic PPO block to DNA, can be an alternative matrix. In this study, we examined the resolution of CE‐SSCP analysis using the PEO‐PPO‐PEO triblock copolymer as the polymer matrix and four same‐sized DNA fragments of similar sequence content. Among 48 commercially available PEO‐PPO‐PEO triblock copolymers, three were selected due to their transparency in the operable range of viscosity and PEO₁₃₇PPO₄₃PEO₁₃₇ exhibited the most effective separation. Significant improvement in resolution allowed discrimination of the similar sequences, thus greatly facilitated CE‐SSCP analysis compared to the conventional polymer matrix. The results indicate that PEO‐PPO‐PEO triblock copolymer may serve as an ideal matrix for high‐resolution CE‐SSCP analysis.     

PPO-based acid–base polymer blend membranes for direct methanol fuel cells

New acid–base polymer blend membranes for direct methanol fuel cells (DMFC) have been designed using a very accessible commercial polymer, poly(2,6-dimethyl-1,4-phenylene oxide) (PPO). The preparation begins with the sulfonation and bromination of PPO to sulfonated PPO (SPPO) and bromomethylated PPO (BrPPO), respectively. Blend membranes are formed by mixing n-propylamine(PrNH₂)-neutralized SPPO and PrNH₂-aminated BrPPO solutions in N-methyl-2-pyrrolidone (NMP), and casting the mixed solution on glass petri dishes followed by acidification with aqueous hydrochloric acid. The compatibility between the acid and base components of the blend is assured by using acidic and basic polymers deriving from the same parent polymer (PPO). Ionic crosslinking is established between the sulfonic groups of SPPO and the amine groups of aminated BrPPO. The ionic crosslinking strengthens the membrane dimensional stability by reducing water uptake and membrane swelling up to temperatures as high as 80 °C. The membranes fabricated as such display good resistance to methanol crossover amidst some, but acceptable loss of proton conductivity. The characteristic factor (i.e. the ratio of proton conductivity to methanol permeability) increases noticeably with the BrPPO content, with the sample containing 30 wt.% BrPPO showing a 16-fold improvement over Nafion 117. The mechanical properties and oxidative stability of the blend membranes also satisfy the requirements for fuel cell assembly and operation.     

溴代及胺交联聚苯醚（PPO）膜的气体透过行为

对聚苯醚(PPO)进行了苯环溴代、甲基溴代以及胺交联,发现苯环溴代可提高O_2、N_2透过率(P),而选择性(α)基本不变。甲基溴代则相反,P降低、α有明显提高。调节两者比例可得到P、α兼优的O_2、N_2分离膜。甲基溴代后进一步胺交联可得到α更高、耐溶剂的膜材料。     

Polyurethane‐mesoporous silica gas separation membranes

The concept of mixed matrix membrane comprising dispersed inorganic fillers into a polymer media has revealed appealing to tune the gas separation performance. In this work, the membranes were prepared by incorporation of mesoporous silica into polyurethane (PU). Mesoporous silica particles with different pore size and structures, MCM‐41, cubic MCM‐48 and SBA‐16, were synthesized by templating method and functionalized with 3‐aminopropyltriethoxysilane (APTES). High porosity and aminated surface of the mesoporous silica enhance the adhesion of the particles to the PU matrix. The SEM and FTIR results showed strong interactions between the particles and the PU chains. Moreover, the thermal stability of the hybrid PUs improved compared to the pure polymer. Gas transport properties of the membranes were measured for pure CO₂, CH₄, O₂, and N₂ gases at 10 bar and 25°C. The results showed that the gas permeabilities enhanced with increasing in the loading of modified mesoporous silica particles. High porosity and amine‐functionalized particles render opportunities to enhance the gas diffusivity and solubility through the membranes. The enhanced gas transport properties of the mixed matrix membranes reveal the advantages of mesoporous silica to improve the gas permeability (CO₂ permeability up to ~70) without scarifying the gas selectivity (α(CO₂/N₂)~ 30 for 5 wt% SBA‐16 content).     

Separation of nitrogen and oxygen gases by polymeric membrane embedded with magnetic nano‐particle

Asymmetric polyethersulfone (PES) micro‐porous flat sheet membranes were prepared by the phase inversion method (PIM) and used as the support. PES‐PDMS composite membranes were fabricated with coating polydimethylsiloxane on the surface of PES membrane. The FluidMAG‐PAD was coated on PES and PES‐PDMS membrane to prepare super‐paramagnetic membranes for separation of oxygen from nitrogen. Permeance and O₂/N₂ selectivity were evaluated in the absence or presence of external magnetic field. In the absence of external magnetic field, the super‐paramagnetic polymer provides larger surface area leading to extended sites for oxygen adsorption. In the presence of magnetic field, the super‐paramagnetic particles obtained magnetic property leading to a pronounced interaction with oxygen resulting in elevated selectivity and permeability. Copyright © 2011 John Wiley & Sons, Ltd.     

Enhancement on the permeation performance of polyimide mixed matrix membranes by incorporation of graphene oxide with different oxidation degrees

Graphene oxide (GO) with different oxidation degrees were synthesized by harsh oxidation of graphite using the improved Hummers method. The GO/polyimide (PI) mixed matrix membrane was successfully fabricated by in situ polymerization of PI monomers (3,3′,4,4′‐biphenyltetracarboxylic dianhydride and 4,4′‐diaminodiphenyl ether) with GO. The structure of GO was characterized by Fourier transform infrared, transmission electron microscopy, atomic force microscopy, X‐ray diffraction, and thermal gravimetric analysis–differential thermal analysis. The performance of different GO/PI mixed matrix membranes was evaluated by permeation experiments of CO₂/N₂ gas mixture (volume ratio, 1:9). Results showed that more polar functional groups were introduced to GO with the increase in oxidation degree of GO in the preparation process, producing fewer layers and more translucent structures. GO with higher oxidation degree has significant effect on its dispersion in the N,N‐dimethylacetamide solvent and polymer matrix materials. The permeability of GO/PI hybrid membranes for CO₂ and N₂ increased. The CO₂/N₂ permeation selectivity of membranes exhibited a trend of initial increase, followed by a decrease, with the increase in oxidation degree, when the same amount of GO was added. For GO with the same oxidation degree, the permeability and permeation selectivity of hybrid membrane initially increased, and then decreased with the addition content of GO. In the case of hybrid membrane containing 1 wt% monolayer GO, the maximum permeability and permeation selectivity of hybrid membranes for CO₂ were 14.3 and 4.2 times more than that of PI membrane without GO, respectively. Copyright © 2015 John Wiley & Sons, Ltd.     

Gas‐Separation Membranes Loaded with Porous Aromatic Frameworks that Improve with Age

Porosity loss, also known as physical aging, in glassy polymers hampers their long term use in gas separations. Unprecedented interactions of porous aromatic frameworks (PAFs) with these polymers offer the potential to control and exploit physical aging for drastically enhanced separation efficiency. PAF‐1 is used in the archetypal polymer of intrinsic microporosity (PIM), PIM‐1, to achieve three significant outcomes. 1) hydrogen permeability is drastically enhanced by 375 % to 5500 Barrer. 2) Physical aging is controlled causing the selectivity for H₂ over N₂ to increase from 4.5 to 13 over 400 days of aging. 3) The improvement with age of the membrane is exploited to recover up to 98 % of H₂ from gas mixtures with N₂. This process is critical for the use of ammonia as a H₂ storage medium. The tethering of polymer side chains within PAF‐1 pores is responsible for maintaining H₂ transport pathways, whilst the larger N₂ pathways gradually collapse.     

Gas permeability and n‐butane solubility of poly(1‐trimethylgermyl‐1‐propyne)

The gas permeability and n‐butane solubility in glassy poly(1‐trimethylgermyl‐1‐propyne) (PTMGP) are reported. As synthesized, the PTMGP product contains two fractions: (1) one that is insoluble in toluene and soluble only in carbon disulfide (the toluene‐insoluble polymer) and (2) one that is soluble in both toluene and carbon disulfide (the toluene‐soluble polymer). In as‐cast films, the gas permeability and n‐butane solubility are higher in films prepared from the toluene‐soluble polymer (particularly in those films cast from toluene) than in films prepared from the toluene‐insoluble polymer and increase to a maximum in both fractions after methanol conditioning. For example, in as‐cast films prepared from carbon disulfide, the oxygen permeability at 35 °C is 330 × 10^?10 cm³ (STP) cm/(cm² s cmHg) for the toluene‐soluble polymer and 73 × 10^?10 cm³ (STP) cm/(cm² s cmHg) for the toluene‐insoluble polymer. After these films are conditioned in methanol, the oxygen permeability increases to 5200 × 10^?10 cm³ (STP) cm/(cm² s cmHg) for the toluene‐soluble polymer and 6200 × 10^?10 cm³ (STP) cm/(cm² s cmHg) for the toluene‐insoluble polymer. The rankings of the fractional free volume and nonequilibrium excess free volume in the various PTMGP films are consistent with the measured gas permeability and n‐butane solubility values. Methanol conditioning increases gas permeability and n‐butane solubility of as‐cast PTMGP films, regardless of the polymer fraction type and casting solvent used, and minimizes the permeability and solubility differences between the various films (i.e., the permeability and solubility values of all conditioned PTMGP films are similar). © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2228–2236, 2002     

Development and characterization of homogeneous membranes de from high molecular weight sulfonated polyphenylene oxide

The high molecular weight polyphenylene oxide (PPO) was sulfonated to different ion exchange capacity (IEC) values using chlorosulfonic acid. The physico-chemical properties along with the gas transport properties of the membranes prepared from sulfonated PPO (SPPO) were evaluated. Sulfonation of PPO results in a linear increase of density with the IEC value while the average d-spacing in polymer remains constant. Sulfonic groups attached to the aromatic ring in the PPO backbone are not thermally stable. On the other hand, when tested with CO₂ at room temperature, the SPPO membranes maintained a constant permeability over the period of 60 days. An increase in IEC value of SPPO results in an increase in O₂/N₂ and CO₂/CH₄ ideal selectivities and a decrease in O₂ and CO₂ permeabilities. The combination of permeability and ideal selectivity for both gas pairs places the SPPO membranes below the respective upper-bound lines for polymeric membranes. However, an increase in the IEC value brings the permeability versus ideal selectivity relationship closer to the upper-bound line, especially for the O₂/N₂ gas pair.     

Suppression of CO2-plasticization by semiinterpenetrating polymer network formation

CO₂-induced plasticization may significantly spoil the membrane performance in high-pressure CO₂/CH₄ separations. The polymer matrix swells upon sorption of CO₂, which accelerates the permeation of CH₄. The polymer membrane looses its selectivity. To make membranes attractive for, for example, natural gas upgrading, plasticization should be minimized. In this article we study a polymer membrane stabilization by a semiinterpenetrating polymer network (s-ipn) formation. For this purpose, the polyimide Matrimid 5218 is blended with the oligomer Thermid FA-700 and subsequently heat treated at 265°C. Homogeneous films are prepared with different Matrimid/Thermid ratios and different curing times. The stability of the modified membrane is tested with permeation experiments with pure CO₂ as well as CO₂/CH₄ gas mixtures. The original membrane shows a minimum in its permeability vs. pressure curves, but the modified membranes do not indicating suppressed plasticization. Membrane performances for CO₂/CH₄ gas mixtures showed that the plasticizing effect indeed accelerates the permeation of methane. The modified membrane clearly shows suppression of the undesired methane acceleration. It was also found that just blending Matrimid and Thermid was not sufficient to suppress plasticization. The subsequent heat treatment that results in the s-ipn was necessary to obtain a stabilized permeability. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1547–1556, 1998     

Polypyrrolones for membrane gas separations. I. Structural comparison of gas transport and sorption properties

Despite efforts by the membrane community to develop polymeric materials with improved O₂/N₂ separation performance, limited progress has occurred for almost a decade. Molecular sieving media, which can exhibit gas separation properties superior to polymers, tend to be brittle and uneconomical to produce for large‐scale membrane separation processes. Considering this, the polymer structures investigated in this work were designed to mimic aspects of the structure of molecular sieving media such as zeolites and carbon molecular sieves while maintaining the processability associated with polymers. Significantly attractive gas separation material properties were obtained using hyper rigid polypyrrolone copolymers with controlled packing disruptions between flat, packable segments. The gas transport properties in the materials changed dramatically as a result of different average interchain spacing. Moreover, all of the polypyrrolones studied in this work exhibited performance lying on or above the existing O₂/N₂ upper bound trade‐off line between permselectivity and permeability. These results, therefore, may point the way to a new cycle of membrane materials improvements for gas separations. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1235–1249, 1999     

The effect of preparation parameters on performance of polyvinyl alcohol thin‐film composite membrane: Experimental study,modeling, and optimization

To systematically investigate the influence of preparation conditions on pure water permeability (PWP) and solute removal performance of polyvinyl alcohol (PVA) thin‐film composite (TFC) membrane, fractional factorial design was applied. The considered conditions were related to 3 steps of the TFC preparation, including support membrane preparation, PVA coating, and cross‐linking. The results showed that among the selected factors, polysulfone concentration (polymer of the support membrane), heat curing time (related to cross‐linking condition), and their interaction have the most significant effects on the both permeability and salt rejection. The effects of significant factors interaction on permeability and solute rejection of PVA TFC membrane were discussed. Finally, optimum preparation conditions were calculated by numerical optimization to achieve maximum permeability and solute removal, simultaneously. The prepared membrane at optimum conditions showed PWP of 1.74 L/m²hbar and 96.19% Na₂SO₄ rejection. It was realized that the prediction of mathematical models at optimum conditions was reliable with absolute average relative error 7.43% and 1.18% for PWP and rejection, respectively.     

Concurrent Block Copolymer Polymersome Stabilization and Bilayer Permeabilization by Stimuli‐Regulated “Traceless” Crosslinking

The fabrication of block copolymer (BCP) vesicles (polymersomes) exhibiting synchronized covalent crosslinking and bilayer permeabilization remains a considerable challenge as crosslinking typically leads to compromised membrane permeability. Herein it is demonstrated how to solve this dilemma by employing a stimuli‐triggered crosslinking strategy with amphiphilic BCPs containing photolabile carbamate‐caged primary amines. Upon self‐assembling into polymersomes, light‐triggered self‐immolative decaging reactions release primary amine moieties and extensive amidation reactions then occur due to suppressed amine pK_a within hydrophobic milieu. This leads to serendipitous vesicle crosslinking and the process is associated with bilayer hydrophobicity‐to‐hydrophilicity transition and membrane permeabilization.     

Resonance Scattering Effect of Dopamine Product Particle and Its Application to Polyphenoloxidase Activity Assay

In pH 7.2 Na₂HPO₄‐NaH₂PO₄ buffer solution, polyphenoloxidase (PPO) could catalyze the oxidization of dopamine (DA) to form polymer particles in dark‐red color, which exhibited a strong resonance scattering (RS) peak at 780 nm. In the chosen conditions, as the PPO activity increased, the RS intensity at 780 nm increased linearly. The increased RS intensity (ΔI_{780 nm}) was linear to the PPO activity in the range of 0.10–6.0 U·mL^?1, with a regression equation of ΔI_{780 nm}?96.6C+15.1, a relative coefficient of 0.9987 and a detection limit of 0.06 U·mL^?1 PPO. The proposed method was applied to detecting PPO activity in potato sample with satisfactory results.