Chlorotitanium (IV) tetradentate Schiff‐base complex immobilized on inorganic supports: Support type and other factors having effect on ethylene polymerization activity

A titanium complex with [O,N,N,O]‐type tetradentate Schiff base (LTiCl₂), never used before in polymerization of olefins, was immobilized on silica‐ and magnesium‐type carriers, and it was used in ethylene polymerization. The conducted research revealed that the catalytic properties of the complex LTiCl₂ supported on those carriers were different for both the catalytic systems studied, and simultaneously they turned out different from those of the unsupported system. The supported catalysts require the use of Me₃Al, Et₃Al, or MAO as the activator to be able to offer high catalytic activities, whereas Et₂AlCl is needed for the nonsupported catalyst. This finding, together with considerable changes in polymerization yields and in properties of polymers versus composition of the catalytic system, suggest that there are different types of active sites in the studied catalysts. The catalyst anchored on the carrier produced in the reaction of MgCl₂·3.4EtOH with Et₂AlCl is definitely the most active one within the support systems tested. Its activity remarkably increases with the increasing reaction temperature. Moreover, that catalyst does not undergo deactivation over the studied period of time, irrespective of the type of the activator used and of the process temperature. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4811–4821, 2009     

Synthesis of Titanium (IV) Complexes with Schiff‐base Ligand and Their Catalytic Activities for Polymerization of Ethylene and Styrene

Reaction of titanium (IV) isopropoxide with the unusual land of Shiff‐base in 1:1 molar ratio gives a variety of new derivatives of titanium (IV) in high yield. These complexes were characterized by elemental analyses, IR, MS and ¹H NMR. It was noteworthy to find that all these complexes were active for polymerizations of ethylene and styrene when activated by a Lewis acid cocatalyst (MAO).     

Heat Stabilizers as Activators in Coordination Polymerization

Summary: The solvent‐free syndiospecific styrene polymerization as an example of a coordination polymerization has been investigated with a catalyst system consisting of η⁵‐octahydrofluorenyl titanium trimethoxide as a transition metal catalyst, MAO as a cocatalyst, and TIBA, in the presence of reaction products of sterically hindered phenolic compounds, usually applied as heat stabilizers of polymers. Unexpectedly, such reaction products led to a significant increase in polymerization activity of the catalyst system. Second, after deactivation of the catalyst system, such activators result in a significantly enhanced thermal stability of the syndiotactic polymers received.

Effect of the P₈‐activator on polymerization activity in dependence on polymerization time (molar ratio–styrene:MAO:TIBA:P:Ti = 700 000:50:25:25:1; molar ratio–phenolic compound:TIBA = 1:3.2; polymerization temperature: 50 °C).     

取代芳基钛酸酯类化合物催化苯乙烯间规聚合

以取代芳基钛酸酯化合物为催化剂催化苯乙烯聚合,考察了催化剂、聚合温度,摩尔比nAl/nTi以及聚合时间等因素对聚合行为及产物性质的影响。并用13C-NMR、FT-IR、DSC等手段表征了聚合产物。结果表明:在nAl/nTi=1 000,聚合温度为60℃条件下,2,2′-硫代双(4-甲基-6-叔丁基酚氧基)二氯化钛催化苯乙烯聚合显示出很高的催化活性,其活性为6.87×105g sPS/(mol Ti.h),所得聚合物为间规聚苯乙烯,间规度96.9%,分子量为1.98×105。     

Mimicking Ziegler‐Natta Catalysts in Homogeneous Phase, 1. C2‐Symmetric Octahedral Zr(IV) Complexes with Tetradentate [ONNO]‐Type Ligands

Results of propene polymerization in the presence of two known octahedral C₂‐symmetric Zr complexes bearing tetradentate [ONNO]‐type ligands are reported for the first time. Depending on the steric hindrance at the active metal, isotactic site‐controlled or weakly syndiotactic chain‐end‐controlled polymers were obtained, in both cases via highly regioselective 1,2 (primary) monomer insertion. In this respect, the complexes mimic the behavior of the active Ti species on the surface of the heterogeneous Ziegler‐Natta catalysts of which they might represent good structural models.     

Influence of the catalyst on monomer insertion in the syndiospecific copolymerization of styrene and para‐methylstyrene

The effect of the kind of transition‐metal catalyst on the extent of comonomer insertion in the syndiospecific complex‐coordinative copolymerization of styrene and para‐methylstyrene has been investigated. The results for the influence of the polymerization conditions have shown that there is no real difference between solution copolymerization in toluene and solvent‐free styrene copolymerization in bulk, with respect to the reactivity ratio for para‐methylstyrene (r₂), under comparable conditions in the presence of methylaluminoxane and triisobutylaluminum and at low polymerization conversions. All the investigated catalysts lead to a preferred incorporation of para‐methylstyrene into the polymer chain in comparison with styrene and over the whole range of monomer compositions. The increasing capability of the different catalysts to provide copolymers with enhanced para‐methylstyrene concentrations can be summarized by the increasing r₂ values for the copolymerization in bulk as follows: η⁵‐pentamethylcyclopentadienyl titanium trichloride < η⁵‐octahydrofluorenyl titanium trimethoxide < η⁵‐octahydrofluorenyl titanium tristrifluoroacetate < η⁵‐cyclopentadienyl titanium(N,N‐dicyclohexylamido)dichloride < η⁵‐cyclopentadienyl titanium trichloride. For a correlation between the catalyst structure and the comonomer insertion, the catalysts can be described by electronic effects (electrostatic charge of the transition‐metal atom) and steric effects (minimum structural cone angle). The results show that the steric properties of the transition‐metal complexes have the most important effect on the insertion of para‐methylstyrene into the copolymer. If the minimum structural cone angle of the ligand of the transition‐metal catalyst decreases, the incorporation of the comonomer para‐methylstyrene increases significantly. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2061–2067, 2005     

Novel vanadium(III) complexes with tridentate phenoxy‐phosphine [O,P(O),O] ligands: Synthesis,characterization, and catalytic behavior of ethylene polymerization and copolymerization with 10‐undecen‐1‐ol

A series of novel vanadium(III) complexes bearing tridentate phenoxy‐phosphine [O,P,O] ligands and phosphine oxide‐bridged bisphenolato [O,P?O,O] ligands, which differ in the steric and electronic properties, have been synthesized and characterized. These complexes were characterized by Fourier transform infrared spectroscopy (FTIR) and mass spectra as well as elemental analysis. Single‐crystal X‐ray diffraction revealed that complexes 3c and 4e adopt an octahedral geometry around the vanadium center. In the presence of Et₂AlCl as a cocatalyst, these complexes displayed high catalytic activities up to 22.8 kg PE/mmol_V.h.bar for ethylene polymerization, and produced high‐molecular‐weight polymers. Introducing additional oxygen atom on phosphorus atom of [O,P,O] ligands has resulted in significant changes on the aspect of steric/electronic effect, which has an impact on polymerization performance. 3c and 4c /Et₂AlCl catalytic systems were tolerant to elevated temperature (70 °C) and yielded unimodal polyethylenes, indicating the single‐site behavior of these catalysts. By pretreating with equimolar amounts of alkylaluminums, functional α‐olefin 10‐undecen‐1‐ol can be efficiently incorporated into polyethylene chains. 10‐Undecen‐1‐ol incorporation can easily reach 14.6 mol % under the mild conditions. Other reaction parameters that influenced the polymerization behavior, such as reaction temperature, Al/V (molar ratio), and comonomer concentration, are also examined in detail. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Propylene Polymerization Performance of Isolated and Aggregated Ti Species Studied Using a Well‐Designed TiCl3/MgCl2 Ziegler‐Natta Model Catalyst

In propylene polymerization with MgCl₂‐supported Ziegler‐Natta catalysts, it is known that the reduction of TiCl₄ with alkylaluminum generates Ti³⁺ active species, and at the same time, leads to the growth of TiCl_x aggregates. In this study, the aggregation states of the Ti species were controlled by altering the Ti content in a TiCl₃/MgCl₂ model catalyst prepared from a TiCl₃ · 3C₅H₅N complex. It is discovered that all the Ti species become isolated mononuclear with a highly aspecific feature below 0.1 wt.‐% of the Ti content, and that the isolated aspecific Ti species are more efficiently converted into highly isospecific ones by the addition of donors than active sites in aggregated Ti species.

     

Bis(β‐enaminoketonato) vanadium (III or IV) complexes as catalysts for olefin polymerization

Bis(β‐enaminoketonato) vanadium(III) complexes ( 2a–c ) [O(R₁)C?C(H)_xC(R₂)?NC₆H₅]₂VCl(THF) and the corresponding vanadium(IV) complexes ( 3a–c ) [O(R₁)C?C(H)_xC(R₂)? NC₆H₅]₂VO (R₁ = ? (CH₂)₄? , R₂ = H, x = 0, a ; R₁ = ? C₆H₅, R₂ = H, x = 1, b ; R₁ = ? C₆H₅, R₂ = ? C₆H₅, x = 1, c ) have been synthesized from VCl₃(THF)₃ and VOCl₂(THF)₂, respectively, by treating with 2.0 equivalent β‐enaminoketonato ligands in tetrahydrofuran. Structures of 2b and 3a–c were further confirmed by X‐ray crystallographic analysis. The complexes were investigated as the catalysts for ethylene polymerization in the presence of Et₂AlCl. Complexes 2a–c and 3a–c exhibited high catalytic activities (up to 23.76 kg of PE/mmol_V h bar), and afforded polymers with unimodal molecular weight distributions at 70 °C indicating the good thermal stability. The catalytic behaviors were influenced not only by the oxidation state of the catalyst precursors but also by the ligand structures. Complexes 2a–c and 3a–c were also effective catalyst precursors for ethylene/1‐hexene copolymerization. The influence of polymerization parameters such as reaction temperature, Al/V molar ratio and hexene feed concentration on the ethylene/hexene copolymerization behaviors have bee also investigated in detail. In addition, the agents such as AlMe₃, AlⁱBu₃, MeMgBr, MgCl₂, and ZnEt₂ were applied to control the molecular weight and molecular weight distribution modal. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3062–3072, 2010     

Olefin polymerization catalyzed by amide vanadium(IV) complexes: The stereo‐ and regiochemistry of propylene insertion

The reaction of VCl₃(THF)₃ with 1 equiv of the lithium salt of ligand ArNH(Me₂SiCH₂CH₂SiMe₂)NHAr or ArNH(SiMe₃) (Ar = 2,6‐Me₂C₆H₃) afforded the corresponding V(IV) amide complexes, [1,2‐CH₂CH₂(Me₂SiNAr)₂]VCl₂ ( 3 ) and (Me₃SiNAr)₂VCl₂ ( 4 ). The activation of 3 and 4 with the alkyl aluminum compound Al₂Et₃Cl₃ or AlEt₂Cl produced active ethylene polymerization catalysts exhibiting productivity values among the highest reported for vanadium amide based catalysts. Moreover, syndiotactic specific propylene polymerization was successfully conducted at ?40 °C in the presence of 3 /Al₂Et₃Cl₃ and 4 /Al₂Et₃Cl₃. Syndiotactic polypropylenes with moderate stereoregularity ([rr] = 0.66) and a concentration of regioirregular propylene of 6.9 mol % were obtained. Monomodal molecular weight distributions and polydispersity indices lower than 2 were observed in the polymerization runs carried out in heptane solutions. Thus, ethylene–propylene copolymers with propylene concentrations up to 45 mol % were synthesized and characterized by ¹³C NMR and thermal analysis. Good alternation and random distribution of the two monomers were actually obtained. Samples with elevated concentrations of propylene were completely amorphous, with a glass‐transition temperature of ?50 °C. The properties and structure of the copolymers produced with amide vanadium catalysts 3 and 4 were similar to those reported for ethylene–propylenes produced with industrial vanadium‐based catalysts, suggesting the presence of the same active catalyst species. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3279–3289, 2006     

Gas‐Phase Olefin Polymerization in the Presence of Supported and Self‐Supported Ziegler‐Natta Catalysts

The RPPFM is employed to describe the gas‐phase catalytic polymerization of ethylene in the presence of supported or self‐supported Z‐N catalysts. Numerical simulations are carried out to analyze the effect of the catalyst type on the polymerization rate, particle overheating and the average molecular polymer properties of the polyolefin. It is shown that non‐porous, self‐supported Ziegler‐Natta catalysts exhibit higher particle growth rates and lower particle overheating. The average molecular weight of polyethylene produced by both catalysts is almost identical. Depending on particle size and polymer crystallinity, the average monomer solubility and the effective monomer diffusivity can significantly vary.

     

Dichlorovanadium (IV) complexes with salen‐type ligands for ethylene polymerization

Vanadium complexes with tetradentate salen‐type ligands were first time explored in ethylene polymerizations. The effects of the vanadium complex structure, the alkyl aluminum cocatalysts type (EtAlCl₂, Et₂AlCl, Et₃Al, and MAO), and the polymerization conditions (Al/V molar ratio, temperature) on polyethylene yield were explored. It was found that EtAlCl₂ in conjunction with investigated vanadium complexes produced the most efficient catalytic systems. It was shown, moreover, that the structural changes of the tetradentate salen ligand (type of bridge which bond donor nitrogen atoms and type of substituent on aryl rings) affected activity of the catalytic system. The complexes containing ligands with cyclohexylene bridges were more active than those with ethylene bridges. Furthermore, the presence of electron‐withdrawing groups at the para position and electron‐donating substituents at the ortho position on the aryl rings of the ligands resulted in improved activity in relation to the systems with no substituents (with the exception of bulky t‐Bu group). The results presented also revealed that all vanadium complexes activated by common organoaluminum compounds gave linear polyethylenes with high melting points (134.8–137.6 °C), high molecular weights, and broad molecular weight distribution. The polymer produced in the presence of MAO possesses clearly lower melting point (131.4 °C) and some side groups (around 9/1000 C). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6940–6949, 2008     

Quasi‐living copolymerization of ethylene with 1‐hexene by heteroligated (salicylaldiminato β‐enaminoketonato) titanium complexes

A series of heteroligated (salicylaldiminato)(β‐enaminoketonato)titanium complexes [3‐Bu^t‐2‐OC₆H₃CH = N(C₆F₅)] [PhN = C(R₁)CHC(R₂)O]TiCl₂ [ 3a : R₁ = CF₃, R₂ = ^tBu; 3b : R₁ = Me, R₂ = CF₃; 3c : R₁ = CF₃, R₂ = Ph; 3d : R₁ = CF₃, R₂ = C₆H₄Ph(p ); 3e : R₁ = CF₃, R₂ = C₆H₄Ph(o ); 3f : R = CF₃, R₂ = C₆H₄Cl(p ); 3g : R₁ = CF₃; R₂ = C₆H₃Cl₂(2,5); 3h : R₁ = CF₃, R₂ = C₆H₄Me(p )] were investigated as catalysts for ethylene (co)polymerization. In the presence of modified methylaluminoxane as a cocatalyst, these complexes showed activities about 50%–1000% and 10%–100% higher than their corresponding bis(β‐enaminoketonato) titanium complexes for ethylene homo‐ and ethylene/1‐hexene copolymerization, respectively. They produced high or moderate molecular weight copolymers with 1‐hexene incorporations about 10%–200% higher than their homoligated counterpart pentafluorinated FI‐Ti complex. Among them, complex 3b displayed the highest activity [2.06 × 10⁶ g/mol_Ti?h], affording copolymers with the highest 1‐hexene incorporations of 34.8 mol% under mild conditions. Moreover, catalyst 3h with electron‐donating group not only exhibited much higher 1‐hexene incorporations (9.0 mol% vs. 3.2 mol%) than pentafluorinated FI‐Ti complex but also generated copolymers with similar narrow molecular weight distributions (M _w/M _n = 1.20–1.26). When the 1‐hexene concentration in the feed was about 2.0 mol/L and the hexene incorporation of resultant polymer was about 9.0 mol%, a quasi‐living copolymerization behavior could be achieved. ¹H and ¹³C NMR spectroscopic analysis of their resulting copolymers demonstrated the possible copolymerization mechanism, which was related with the chain initiation, monomer insertion style, chain transfer and termination during the polymerization process. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2787–2797     

Titanium (IV) chloride complexes with salen ligands supported on magnesium carrier: Synthesis and use in ethylene polymerization

The magnesium support with the formula MgCl₂(THF)_0.32(Et₂AlCl)_0.36 was used for immobilization of salen complexes of titanium [Ti(salen)Cl₂, Ti(salen(OMe)₂)Cl₂]. The effects of the catalyst composition (i.e. type of titanium complex and type of activator), polymerization temperature, polymerization time, and the effect of comonomer (1‐octene) on the activity of the obtained supported catalysts, on the polymer characteristics (molecular weight, molecular weight distribution, melting point), and on the polymer morphology were studied. The findings were compared to those obtained for corresponding unsupported systems. Catalysts immobilization results in considerable changes in catalysts activity and in properties of resultant polymers. The studied supported catalysts are highly active in ethylene polymerization, their activity increases with increasing temperature and lasts at least 2 hours. Their copolymerizing ability towards 1‐octene is rather low. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6693–6703, 2009     

Ethylene polymerization and ethylene/hexene copolymerization with vanadium(III) catalysts bearing heteroatom‐containing salicylaldiminato ligands

A series of novel vanadium(III) complexes bearing heteroatom‐containing group‐substituted salicylaldiminato ligands [RN?CH(ArO)]VCl₂(THF)₂ (Ar = C₆H₄, R = C₃H₂NS, 2a ; C₇H₄NS, 2c ; C₇H₅N₂, 2d ; Ar = C₆H₂tBu₂ (2,4), R = C₃H₂NS, 2b ) have been synthesized and characterized. Structure of complex 2c was further confirmed by X‐ray crystallographic analysis. The complexes were investigated as the catalysts for ethylene polymerization in the presence of Et₂AlCl. Complexes 2a–d exhibited high catalytic activities (up to 22.8 kg polyethylene/mmol_V h bar), and affording polymer with unimodal molecular weight distributions at 25–70 °C in the first 5‐min polymerization, whereas produced bimodal molecular weight distribution polymers at 70 °C when polymerization time prolonged to 30 min. The catalyst structure plays an important role in controlling the molecular weight and molecular weight distribution of the resultant polymers produced in 30 min polymerization. In addition, ethylene/hexene copolymerizations with catalysts 2a–d were also explored in the presence of Et₂AlCl, which leads to the high molecular weight and unimodal distributions copolymers with high comonomer incorporation. Catalytic activity, comonomer incorporation, and polymer molecular weight can be controlled over a wide range by the variation of catalyst structure and the reaction parameters, such as comonomer feed concentration, polymerization time, and polymerization reaction temperature. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3573–3582, 2009     

Synthesis,structural characterization,and olefin polymerization behavior of vanadium(III) complexes bearing bidentate phenoxy‐phosphine ligands

Vanadium(III) complexes bearing phenoxy‐phosphine ligands ( 2a–g ) (2‐R₁‐4‐R₂‐6‐PPh₂‐C₆H₂O)VCl₂(THF)₂ ( 2a : R₁ = R₂ = H; 2b : R₁ = F, R₂ = H; 2c : R₁ = Ph, R₂ = H; 2d : R₁ = tBu, R₂ = H; 2e : R₁ = R₂ = Me; 2f : R₁ = R₂ = tBu; 2g : R₁ = R₂ = CMe₂Ph) were prepared from VCl₃(THF)₃ by treating with 1.0 equiv of the ligand in tetrahydrofuran (THF) in the presence of excess triethylamine (TEA). The reaction of VCl₃(THF)₃ with 2.0 equiv of the ligand in THF in the presence of excess TEA afforded vanadium(III) complexes bearing two phenoxy‐phosphine ligands ( 3c–f ). These complexes were characterized by FTIR and mass spectrum as well as elemental analyses. Structures of 2f and 3c were further confirmed by X‐ray crystallographic analyses. Complexes 2a–g and 3c–f were employed as the catalysts for ethylene polymerization under various reaction conditions. On activation with Et₂AlCl, these complexes exhibited high catalytic activities (up to 41.3 kg PE/mmol_V·h·bar) even at high temperature (70°C), and produced high molecular weight polymer with unimodal molecular weight distributions, indicating the polymerization took place in a single‐site nature. Complexes 3c–f displayed better thermal stability than the corresponding complexes 2a–g under similar conditions. In addition, copolymerizations of ethylene and 1‐hexene with precatalysts 2a–g were also explored in the presence of Et₂AlCl. Catalytic activity, comonomer incorporation, and properties of the resultant polymers can be controlled over a wide range by tuning catalyst structures and reaction parameters.© 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Homo‐ and Copolymerization of Butadiene Catalyzed by an Bis(imino)pyridyl Vanadium Complex

Summary: The bis(imino)pyridyl vanadium(III ) complex [VCl₃{2,6‐bis[(2,6‐iPr₂C₆H₃)NC(Me)]₂(C₅H₃N)}] activated with different aluminium cocatalysts (AlEt₂Cl, Al₂Et₃Cl₃, MAO) promotes chemoselective 1,4‐polymerization of butadiene with activity values higher than classical vanadium‐chloride‐based catalysts. The polymer structure depends on the nature of the cocatalyst employed. The MAO‐activated complex was also found to be active in ethylene‐butadiene copolymerization, producing copolymers with up to 45 mol‐% of trans‐1,4‐butadiene. Crystalline polyethylene and trans‐1,4‐poly(butadiene) segments were detected in these copolymers by DSC and ¹³C NMR spectroscopy.

     

Half‐titanocene complexes bearing dianionic 6‐benzimidazolylpyridyl‐2‐carboximidate ligands: Synthesis,characterization, and their ethylene polymerization

6‐Benzimidazolylpyridyl‐2‐carboximidic half‐titanocene complexes, Cp′TiLCl (Cp′ = C₅H₅, MeC₅H₄, C₅Me₅, L = 6‐benzimidazolylpyridine‐2‐carboxylimidic, C1–C13 ), were synthesized and characterized along with single‐crystal X‐ray diffraction. The half‐titanocene chlorides containing substituted cyclopentadienyl groups, especially pentamethylcyclopentadienyl groups were more stable, while those without substituents on the cyclopentadienyl groups were easily transformed into their dimeric oxo‐bridged complexes, (CpTiL)₂O ( C14 and C15 ). In the presence of excessive amounts of methylaluminoxane (MAO) or modified methylaluminoxane (MMAO), all half‐titanocene complexes showed high catalytic activities for ethylene polymerization. The substituents on the Cp groups affected the catalytic behaviors of the complexes significantly, with less substituents favoring increased activities and higher molecular weights of the resultant polyethylenes. Effects of reaction conditions on catalytic behaviors were systematically investigated with catalytic systems of mononuclear C1 and dimeric C14 . With C1 /MAO, large MAO amount significantly increases the catalytic activity, while the temperature only has a slight effect on the productivity. In the case of C14 /MAO catalytic system, temperature above 60 °C and Al/Ti value higher than 5000 were necessary to observe good catalytic activities. In both systems, higher reaction temperature and low cocatalyst amount gave the polyethylenes with higher molecular weights. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3396–3410, 2008     

Syndiospecific polymerization of styrene with BzCpTiCl3 and methylaluminoxane as cocatalysts

Benzyl cyclopentadienyl titanium trichloride (BzCpTiCl₃) was synthesized from benzyl bromide, cyclopentadienyl lithium, and titanium tetrachloride and used in combination with methylaluminoxane (MAO) for the syndiospecific polymerization of styrene. Kinetic measurements of the polymerization were carried out at different temperatures. The polymerization with BzCpTiCl₃/MAO differs from the polymerization with cyclopentadienyl titanium trichloride in its behavior toward the Al/Ti ratio. In addition, high activities are observed at high Al/Ti ratios. By analyzing the polymerization runs and the physical properties of the polymers with differential scanning calorimetry, ¹³C NMR spectroscopy, wide‐angle X‐ray scattering measurements, and gel permeation chromatography, we found that the phenyl ring coordinates to the titanium atom during polymerization. Other known substitutions of the cyclopentadienyl ring (V. Scholz, Dissertation, University of Hamburg, 1998) in principle influence the polymerization activity. The physical properties of the polymers produced by the catalysts already known are nearly identical. BzCpTiCl₃ is the first catalyst that leads to polystyrene obviously different from the polystyrene produced by other highly active catalysts. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2805–2812, 2001