Effect of metals on the catalytic activity of sulfated zirconia for light naphtha isomerization

We studied on the function of the metal in the sulfated zirconia(SO₄^2–/ZrO₂) catalyst for the isomerization reaction of light paraffins. The addition of Pt to the SO₄^2–/ZrO₂ carrier could keep the high catalytic activity. The improvement in this isomerization activity is because Pt promotes removal of the coke precursor deposited on the catalyst surface. Though this catalytic function was observed in other transition metals, such as Pd, Ru, Ni, Rh and W, Pt exhibited the highest effect among them. It was further found that the Pd/SO₄^2–/ZrO₂–Al₂O₃ catalyst possessed a catalytic function for desulfurization of sulfur-containing light naphtha in addition to the skeletal isomerization. The sulfur tolerance of catalyst depended on the method of adding Pd, and the catalyst prepared by impregnation of the SO₄^2–/ZrO₂–Al₂O₃ with an aqueous solution of Pd exhibited the highest sulfur tolerance.Further, we investigated the improvement in sulfur tolerance of the Pt/SO₄^2–/ZrO₂–Al₂O₃ catalyst by impregnation of Pd. The results of EPMA analysis indicated that this catalyst was a hybrid-type one (Pt/SO₄^2–/ZrO₂–Pd/Al₂O₃) in which Pt/SO₄^2–/ZrO₂ particles and Pd/Al₂O₃ particles adjoined closely. This hybrid catalyst possessed a very high sulfur tolerance to the raw light naphtha that was obtained from the atmospheric distillation apparatus, although this light naphtha contained much sulfur. We assume that such a high sulfur tolerance in the hybrid catalyst is brought about by the isomerization function of Pt/SO₄^2–/ZrO₂ particles and the hydrodesulfurization function of Pd/Al₂O₃ particles. Besides, since the hybrid catalyst also provides high catalytic activity in the isomerization of HDS light naphtha, we suggest that the Pd/Al₂O₃ particles supply atomic hydrogen to the Pt/SO₄^2–/ZrO₂ particles by homolytic dissociation of gaseous hydrogen and also enhance the sulfur tolerance of Pt/SO₄^2–/ZrO₂ particles. Finally, we also propose the most suitable location of Pd and Pt in the metal-supported SO₄^2–/ZrO₂–Al₂O₃ catalyst.     

A Mössbauer study on remarkable changes in chemical states of iron in silica-supported Pd-Fe bimetallic catalysts by varying Fe contents

Fe-57 Mössbauer spectra of silica-supported Pd–Fe bimetallic catalysts show remarkable changes with varying Fe/Pd atomic ratios. From the spectra, the main Fe-component is estimated as highly dispersed Fe in the Fe/Pd range of 0.05–0.3 and -Fe ensemble and Fe–Pd intermetallics in the Fe/Pd range above 0.3. It is suggested that the chemical state of iron is associated with the catalytic performance in effective CO–H₂ conversion to methanol.     

Effect of Pt,Pd, and Cs<Superscript>+</Superscript> Additives on the Surface State and Catalytic Activity of WO<Subscript>3</Subscript> in Oxidation of Hydrogen

We have shown that additions of Pt(Pd) and Cs⁺ to WO₃ significantly increase its specific surface area and catalytic activity in H₂ oxidation. After reduction, the promoted specimens contain the phases WO₃, WO_2.9, H_xWO₃; and in the case of Cs⁺ additions, Cs_xWO₃. According to X-ray photoelectron spectroscopy (XPS), the Pt and Pd have an oxidation state close to 0, while tungsten has a +5 oxidation state. The W:O ratio indicates the content of oxygen vacancies in the surface layer. The data are explained taking into account hydrogen spillover from Pt(Pd) to the support.__________Translated from Teoreticheskaya i Eksperimental’naya Khimiya, Vol. 41, No. 2, pp. 126–129, March– April, 2005.     

Combustion of methane over supported palladium-copper bimetallic catalysts

Monometallic and bimetallic catalysts based on palladium and copper deposited on a spinel carrier have been investigated in the catalytic combustion of methane. Great differences were found in catalytic activity, according to the sequence Pd/MgAl₂O₄>CuO–Pd/MgAl₂O₄>Pd–CuO/MgAl₂O₄>CuO/MgAl₂O₄. They were explained by changes in surface composition of the catalysts. In the case of bimetallic catalysts the metallic surface is preferentially enriched in copper, which acts as a diluting agent for the Pd atom ensembles. As a consequence, the adsorption of reactants is limited and the catalysts so obtained behave like copper slightly doped with palladium.     

WO3/C hybrid material as a highly active catalyst support for formic acid electrooxidation

The hybrid material based on WO₃ and Vulcan XC-72R carbon has been used as the support of Pd nanocatalysts. The resultant Pd–WO₃/C catalysts in a large range of WO₃ content exhibit excellent catalytic activity and stability for formic acid electrooxidation. The great improvement in the catalytic performance is attributed to the uniform dispersion of Pd with less particle sizes on the WO₃/C support and the hydrogen spillover effect which greatly accelerates the dehydrogenation of HCOOH on Pd.     

Voltammetric evaluation of the electrode material on the oxidation of cyanide catalyzed by copper ions

The cyanide oxidation on vitreous carbon (VC), stainless steel 304 (SS 304) and titanium (Ti) was investigated through a voltammetric study of cyanide solutions also containing copper ions. Results showed that cyanide oxidation occurs by means of a catalytic mechanism involving adsorbed species as CN^–, Cu(CN)₄^3– or Cu(CN)₄^2– depending on the electrode material. It was observed that on VC, the adsorption of Cu(CN)₄^3– controlled the oxidation rate. Instead, for SS 304 and Ti, the adsorption of CN^– controlled the global process. However, in all cases, the adsorption of Cu(CN)₄^3– on the electrode surface was required for the catalytic oxidation of CN^–. Voltammetric experiments for solutions containing cyanide oxidation products, such as cyanogen (CN)₂ and cyanate (CNO^–), confirmed that the adsorbed species mentioned above controlled the catalytic oxidation of CN^– depending on the electrode material. A voltammetric identification of the oxidation products showed that cyanogen, (CN)₂ tended to adosorb on VC, while the formation of cyanate, CNO^– predominated on SS 304.     

Influence of Pd precursors on the catalytic performance of Pd–H4SiW12O40/SiO2 in the direct oxidation of ethylene to acetic acid

The effects of palladium precursors (PdCl₂, (NH₄)₂PdCl₄, Pd(NH₃)₂Cl₂, Pd(NO₃)₂ and Pd(CH₃COO)₂) on the catalytic properties in the selective oxidation of ethylene to acetic acid have been investigated for 1.0 wt% Pd–30 wt% H₄SiW₁₂O₄₀/SiO₂. The structures of the catalysts were characterized using X-ray diffraction, N₂ adsorption, H₂-pulse chemical adsorption, infrared spectrometry of the adsorbed pyridine, H₂ temperature-programmed reduction and X-ray photoelectron spectroscopy. The present study demonstrates that the different palladium precursors can lead to the significant changes in the dispersion of palladium. It is found that Pd dispersion decreases as follows: PdCl₂ > (NH₄)₂PdCl₄ > Pd(NO₃)₂ > Pd(NH₃)₂Cl₂ > Pd(C₂H₃O₂)₂, which is nearly identical to the catalytic activity. This indicates that the dispersion of palladium plays an important role in the catalytic activity. Furthermore, density of Lewis (L) and Brönsted (B) acid sites are also strongly dependent on the palladium precursors. It is also demonstrated that an effective catalyst should possess a well combination of Brönsted acid sites with dispersion of palladium.     

Reaction between isoprene and aniline on complex palladium catalysts

Isoprene and aniline have been reacted on the catalytic system Pd(acac)₂-Ph₃P to form a mixture of isomeric telomers: N-(dimethyloctadien-2,7-yl-1)anilines and N-(dimethyloctadien-1,7-yl-3)anilines but on the catalytic system Pd(acac)₂-Ph₃P-CF₃COOH the main product is a mixture of N-(methylbuten-2-yl)aniline adducts. The reaction between N-methylaniline and isoprene on the latter catalyst also gives a mixture of N-methyl and N-(methylbuten-2-yl)aniline adducts.A. N. Nesmeyanov Institute of Organoelemental Compounds, Russian Academy of Sciences, 117813 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1794–1798, August, 1992.     

Pd complexes of iminophosphine ligands: A homogeneous molecular catalyst for Suzuki–Miyaura cross-coupling reactions under mild conditions

The complexes formed by combining Pd(OAc)₂ and iminophosphine ligands (P^N) are active catalysts in Suzuki–Miyaura cross-coupling reactions under mild conditions. Aryl bromides and iodides, as well as benzyl chlorides give the corresponding coupled products in high yields at low temperatures (25–50 °C) using these catalysts. Iminophosphines containing the most sterically demanding groups attached to the N-imino moiety were the most effective ligands. New divalent Pd complexes of known iminophosphines were synthesised and their activity was compared with the in situ generated catalyst system. The complex resulting from the oxidative addition of 4-bromo anisole [Pd(4-CH₃OC₆H₄)Br(P^N)] was more active than the in situ generated system. However, palladacycles containing the iminophosphine ligand (e.g., {[C₆H₄CH(Me)₂St-Bu]Pd(P^N)}⁺PF₆⁻) were less active than the in situ generated catalyst due to the greater stability of the complexes that involve two bidentate ligands. Poisoning tests demonstrated that homogeneous mononuclear palladium species containing the iminophsophine ligand were responsible for the catalytic activity.     

Anodic Dissolution of Palladium in Sulfuric Acid: An Electrochemical Quartz Crystal Microbalance Study

Regularities of formation of a palladium oxide layer and its cathodic reduction in 0.5 M H₂SO₄ at 0.5–1.3 V (SHE) are studied by cyclic voltammetry, x-ray photoelectron spectroscopy, and electrochemical quartz crystal microbalance. A pure Pd plate and a 0.5-m-thick Pd coating on gold-sputtered quartz crystal is used for electrochemical and microgravimetric studies. It is shown that a Pd electrode dissolves electrochemically in 0.5 M H₂SO₄ when its potential is cycled between 0.5 and 1.3 V. In the case of 0.5-m-thick Pd coating on the gold substrate, the decrease in the electrode weight during one anodic–cathodic cycle is 1.0–1.5 g/cm². It is suggested that anodic process at 0.5–1.3 V (SHE) represents electrochemical oxidation of palladium, yielding a surface layer of poorly soluble Pd(OH)₂ and/or PdO phases, as expressed by the equation Pd + 2H₂O (Pd(OH)₂/PdO)_s + 2H⁺ + 2e. This surface layer, (Pd(OH)₂/PdO)_s, undergoes reduction during the cathodic process. About 5% of the total amount of ionized palladium dissolve in electrolyte.     

一维CeO2纳米管载体对Pd纳米粒子团聚的抑制及催化性能的提高

用一维CeO₂纳米管替代非一维结构的商用CeO₂, 用于负载Pd而制得的催化剂在空气气氛下高温煅烧过程中Pd纳米粒子的团聚受到明显抑制, 在选择性有氧氧化苯甲醇生成苯甲醛反应中, 所制CeO₂纳米管负载的Pd催化剂表现出更高的催化活性. 可见, 一维金属氧化物材料有望用作载体以抑制贵金属纳米粒子的团聚, 从而提高其催化性能.     

Electrospray mass spectrometric study of homogeneous catalytic system Pd(CF3COO)2-Ph2P(CH2)3PPh2-MeOH/Me2CO-H2O for copolymerization of ethylene and carbon monoxide

The catalytic system Pd(CF₃COO)₂-Ph₂P(CH₂)₃PPh₂-MeOH/Me₂CO was studied by electrospray mass spectrometry. The {[Pd(dPPP)₂]²⁺ [(dppp)₂Pd(CF₃COO)]⁺, [(dppp)Pd(CF₃COO)]⁺, and [(dppp)Pd(CF₃COO)₂Pd(dppp)]²⁺} cations were found in the system. The addition of H₂O to the system resulted in the formation of binuclear bicharged ions [(dppp)Pd(OH)]₂ ²⁺ and their associates with water.Translated from Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 494–496, February, 1996     

Selective Oxidation of Glucose to Gluconic Acid over Bimetallic Pd–Me Catalysts (Me = Bi,Tl, Sn,Co)

Catalytic properties of bimetallic Pd–Bi, Pd–Tl, Pd–Sn, and Pd–Co catalysts supported on C (from plum stones) and SiO₂ were studied in the reaction of glucose oxidation to gluconic acid. Catalysts modified with Bi show the best selectivity and activity. The results obtained from research on 5% Pd–5% Bi/C and 5% Pd–5% Bi/SiO₂ catalytic systems were compared with the results for a commercial catalyst containing 1% Pt–4% Pd–5% Bi supported on active carbon (Degussa). For both Pd–Bi/support catalysts and 1% Pt–4% Pd–5% Bi/C, similar selectivity in the reaction of glucose oxidation was observed. XRD studies proved the presence of intermetallic compounds BiPd and Bi₂Pd, which probably increase the selectivity of PdBi/SiO₂ catalysts.     

Cu含量对Pd-Cu/铝土矿CO氧化催化剂结构和性能的影响

利用资源丰富的天然铝土矿经NaOH溶液水热处理后焙烧,获得比表面积达174 m²·g^-1铝土矿载体,制备了双金属Pd-Cu为活性组分的催化剂,金属Pd负载量为0.5%（质量百分数）,以CO氧化反应为探针反应,详细考察了Cu含量的变化对催化剂物化性能的影响。研究发现,Cu的引入有利于提高金属Pd的分散度,同时随着Cu含量的变化,金属Pd与Cu之间以及金属与铝土矿载体之间的相互作用随之改变。催化剂的CO氧化反应性能评价结果表明,Pd和Cu负载量分别为0.5%和4%的样品（PdCu₄/MB）催化反应性能最佳。结合表征结果认为,PdCu₄/MB的高活性归因于良好的Pd和Cu分散度,金属Pd、Cu以及金属与载体之间较强的相互作用。此外,CO-TPD表征结果说明较强的CO吸附能力和从载体中获取氧的能力也有利于提高PdCu₄/MB样品的CO氧化反应性能。     

Cu含量对Pd-Cu/铝土矿CO氧化催化剂结构和性能的影响

利用资源丰富的天然铝土矿经NaOH溶液水热处理后焙烧,获得比表面积达174 m²·g^-1铝土矿载体,制备了双金属Pd-Cu为活性组分的催化剂,金属Pd负载量为0.5%（质量百分数）,以CO氧化反应为探针反应,详细考察了Cu含量的变化对催化剂物化性能的影响。研究发现,Cu的引入有利于提高金属Pd的分散度,同时随着Cu含量的变化,金属Pd与Cu之间以及金属与铝土矿载体之间的相互作用随之改变。催化剂的CO氧化反应性能评价结果表明,Pd和Cu负载量分别为0.5%和4%的样品（PdCu₄/MB）催化反应性能最佳。结合表征结果认为,PdCu₄/MB的高活性归因于良好的Pd和Cu分散度,金属Pd、Cu以及金属与载体之间较强的相互作用。此外,CO-TPD表征结果说明较强的CO吸附能力和从载体中获取氧的能力也有利于提高PdCu₄/MB样品的CO氧化反应性能。     

Anodic Oxidation of Silver Alloys in Concentrated Sulfuric Acid Solutions

Anodic oxidation of Ag–Cu and Ag–Pd alloys in concentrated sulfuric acid solutions is studied by cyclic voltammetry. Influence of electronegative (Cu) and electropositive (Pd) constituents on the rate and mechanism of the silver electrooxidation in non-steady-state conditions is revealed. The maximum silver oxidation current increases with the copper content due to a decreased H₂SO₄ concentration in the near-electrode layer and increased solubility of passivating phase Ag₂SO₄. The mechanism of ionization of palladium-doped silver is complicated by two electrochemical reactions involving the formation of Ag₂SO₄ and Ag⁺ _solv.     

Dehydrogenation of cyclohexane over Pd/SiO2?AlPO4 catalysts. I. Influence of the catalyst particle size

The influence of the Pd loading on the metal dispersity and catalytic activity of a Pd catalyst supported on SiO₂–AlPO₄ in the dehydrogenationof cyclohexane to benzene has been analyzed. Thermodynamic parameters for the reaction were determined by fitting data to the Basset-Habgood kinetic equation.     

Design of hydroxyapatite-bound transition metal catalysts for environmentally-benign organic syntheses

Novel heterogeneous catalysts, which were designed with atomic precision, easy to prepare, and recyclable, have been developed using a unique inorganic support hydroxyapatite, Ca₁₀(PO₄)₆(OH)₂. The introduction of a Ru cation into the apatite framework can generate a stable monomeric phosphate complex, which exhibits prominent catalytic performances for various oxidation reactions using molecular oxygen as a primary oxidant. Treatment of the RuHAP with an aqueous solution of AgX affords cationic Ru phosphate complexes as Lewis acid catalysts, promoting Diels–Alder and aldol reactions under mild and neutral conditions. Furthermore, two classes of heterogeneous Pd catalysts were synthesized with both stoichiometric and Ca-deficient hydroxyapatites, which show specific functions for aerobic oxidation of alcohols and carbon–carbon bond-forming reactions with extremely high turnover numbers. The catalytic systems described here are simple, efficient, and general for practical organic syntheses; thus meeting the increasing demands for environmentally-benign chemical processes.     

Pd(OAc)2/M(NO3)n (M = Cu(II), Fe(III); n = 2, 3): Kinetic investigations of an alternative Wacker system for the oxidation of natural olefins

Pd-catalyzed oxidative coupling of camphene by dioxygen afforded mainly a diene, which subsequently underwent oxidation to a ring-expanded β,γ-unsaturated ketone with LiNO₃ as reoxidant. However, the instability of LiNO₃ results to the decomposition of NO₃⁻ ions which subsequently deactivates the catalyst. The present investigation describes the oxidation of terpenes catalyzed by Pd(OAc)₂/M(NO₃)_n (M = Cu(II), Fe(III); n = 2 or 3), using dioxygen as final oxidant. Fe(III) and Cu(II) effectively stabilize the nitrate reoxidant as determined by the significant increase of both catalytic activity and stability of the system. Turnover frequency suggests that Fe(III) is the most efficient co-catalyst. Moreover, it is established that the co-catalysts NO₃⁻, Cu(II) and especially Fe(III) ions, change the product distribution (diene/ketone) remarkably. Their involvement in the rate-determining step was investigated and the results of the kinetic investigations clarified important aspects of Pd(II)-catalyzed oxidation reactions. The described protocol offers an alternative to the traditional Wacker system which uses CuCl₂ as co-catalyst and is not effective in promoting the oxidation of bicycle olefins.     

Kinetics and mechanism of formation of tetrachloropalladate(II) in the reactions of bis(oxalato)- and bis(malonato) palladate(II) with chloride in acid media

Summary Kinetics of formation of [PdCl₄]^2– from [Pd(ox)₂]^2– and [Pd(mal)₂]^2– has been studies in aqueous acid media in the presence of an excess of chloride ion by stopped-flow spectrophotometry. Both the complexes undergo the transformation in two well separated consecutive steps. In 0.02–0.05 M acid with 0.2 M Cl^–, Pd(AA)^2– dissociates leading to the formation of [Pd(AA)Cl₂]^2– (where AA =ox^2– or mal^2–), which in 0.1–0.6 M acid and 1 M Cl^– forms [PdCl₄]^2– in a relatively slow step. For both steps k_abs=k₀+k₂[H⁺][Cl^–]. Activation parameters corresponding to k₀ and k₂ have been determined. Results indicate that [Pd(mal)₂]^2– is much more labile to substitution than [Pd(ox)₂]^2– and for both the lability is far greater than that of [Pd(bigH)₂]²⁺ and [Pt(ox)₂]^2– reported earlier.