Comparison between liquid chromatography-UV detection and liquid chromatography-mass spectrometry for the characterization of impurities and/or degradants present in trimethoprim tablets

The characterization of impurities and/or degradants present in pharmaceutical compounds is an important part of the drug development process. Although LC–UV is commonly employed for impurities and degradant compound determination, LC–MS techniques are proposed in this work to be a viable modern alternative for the characterization of these compounds. LC–UV and LC–MS were compared for the detection of impurities present in different brands of trimethoprim tablets by using an in-line LC–UV–MS system with atmospheric pressure chemical ionization source (APCI) coupled with a reversed-phase gradient HPLC system. It was shown that, although chemical noise was higher when using full-scan LC–MS compared to LC–UV, low level impurities were better detected by mass spectrometry (MS) when modern software algorithms are employed. These included the “Contour” chromatogram algorithm and/or the “component detection algorithm” (CODA). In addition, MS allowed for the simultaneous determination of the molecular masses and some structural information of the impurities and/or degradants. The results also showed a large difference in the purity of trimethoprim among different manufacturers. LC–MS and tandem MS techniques were employed to acquire fragmentation patterns for trimethoprim and its degradants to gain insight into their structures.     

Elastic deformations in a magnetic field of a liquid-crystalline polymer with mesogenic groups in the main and side chains

Orientational elastic deformations in a magnetic field and phase transition temperatures of a thermotropically mesogenic “combined” aromatic polyester with mesogenic groups, both in the main and in the side chains, have been investigated in the range of 900 to 10,200 mol. wt. It was shown that in this molecular weight range the birefringence of a completely oriented nematic and correspondingly, the degree of its orientational order S are independent on molecular weight. When the relative temperature ΔT changes from −2 to −30°C the orientational order parameter increases from 0.35 to 0.55. The bend elasticity constants K₃ coincide in the order of magnitude with those for high and low molecular weight nematics investigated previously and their dependence on molecular weight has not been detected.     

Semiempirical molecular orbital studies on p-quinodimethane. Electronic structure assignments based on total energies and comparisons with photoelectron and absorption spectra

The electronic structure of p-quinodimethane has been investigated using both CNDO/S and INDO molecular orbital approximations. It is found that the energetically favorable configuration is a “quinoid” construction leading to a spin-paired singlet ground state. Comparisons of the calculated excitation energies and orbital orderings with optical and photoemission measurements are consistent with this assignment. The “quinoid” configuration is found to be energetically unfavorable toward the formation of a low-lying triplet or “biradical”-like state. Charge density distributions, however, suggest a high ground state chemical reactivity.     

The “Facilitated Transition” hypothesis as an explanation for the gemdialkyl effect

A new technique of searching the conformational space of transition states was used to explore the cause of the rate acceleration in the gem-dialkyl effect in intramolecular cyclization reactions. Several previous hypotheses were discarded and a new hypothesis was advanced based on this new data. This hypothesis, the “Facilitated Transition” hypothesis, states that increased steric hindrance reduces the overall activation energy by facilitating rotation through the transition state. The older “Reactive Rotamer” hypothesis was eliminated by generating all conformations of the starting materials using the and computer programs and demonstrating that no relationship is found between rate increase and a change in the concentration of “reactive rotamers”.     

Relative stabilities and conformational ring inversion potentials in heterocyclic decalin systems and stereoelectronic implications

The energy differences between stereoisomers and the ring inversion potential surfaces of decalin (1) and various oxadecalins (2, 3), dioxadecalins (4–7), trioxadecalins (8, 9) and tetraoxadecalins (10, 11) were interrogated following the generally accepted scheme of a stepwise conformational six-ring inversion process and using molecular mechanics techniques (MM3 and MM3-GE, i.e. MM3 reparametrized for treatment of the “gauche effect”). The results were compared with some available experimental data and were also used to probe the validity of a recently elaborated protocol for ring-fragment analysis of oxygen-containing bicyclic systems in terms of their interannular fragment components: C---C---C---C, C---C---C---O, C---C---O---C, C---O---C---O---C and O---C---C---O, the latter two with their corresponding stereoelectronic effects, namely, the “anomeric effect” and the “gauche effect”, respectively.     

Vapor liquid equilibrium modeling of alkane systems with Equations of State: “Simplicity versus complexity”

Two types of Equations of State (EoS), which are characterized here as “simple” and “complex” EoS, are evaluated in this study. The “simple” type involves two versions of the Peng–Robinson (PR) EoS: the traditional one that utilizes the experimental critical properties and the acentric factor and the other, referred to as PR-fitted (PR-f), where these parameters are determined by fitting pure compound vapor pressure and saturated liquid volume data. As “complex” EoS in this study are characterized the EoS derived from statistical mechanics considerations and involve the Sanchez–Lacombe (SL) EoS and two versions of the Statistical Associating Fluid Theory (SAFT) EoS, the original and the Perturbed-Chain SAFT (PC-SAFT).

The evaluation of these two types of EoS is carried out with respect to their performance in the prediction and correlation of vapor liquid equilibria in binary and multicomponent mixtures of methane or ethane with alkanes of various degree of asymmetry. It is concluded that for this kind of systems complexity offers no significant advantages over simplicity. Furthermore, the results obtained with the PR-f EoS, especially those for multicomponent systems that are encountered in practice, even with the use of zero binary interaction parameters, indicate that this EoS may become a powerful tool for reservoir fluid phase equilibria modeling.     

Effect of laser modified surface microtopochemistry on endothelial cell growth

The introduction of microelectronics technology in the area of biological sciences has brought forth previously unforeseeable applications such as DNA or protein biochips, miniaturized, multiparametric biosensors for high performance multianalyte assays, DNA sequencing, biocomputers, and substrates for controlled cell growth (i.e. tissue engineering). We developed and investigated a new method using “cold” excimer laser beam technology combined with microlithographical techniques to create surfaces with well defined 3D microdomains in order to delineate critical microscopic surface features governing cell–material interactions. Microfabricated surfaces with microgrooves 30–3 μm deep, 10–1 μm wide spaced 30 μm apart were obtained with micron resolution, by “microsculpturing” polymer model surfaces using a computer controlled laser KrF excimer beam coupled with a microlithographic projection technique. The laser beam after exiting a mask was focused onto the polymer target surface via an optical setup allowing for a 10-fold reduction of the mask pattern. Various 3D micropatterned features were obtained at the micron level. Reproducible submicron features could also be obtained using this method. Subsequently, model human umbilical endothelial cells (HUVEC) were cultured on the laser microfabricated surfaces in order to study the effects of specific microscopic surface features on cell deposition and orientation. Cell deposition patterns were found to be microstructure dependant, and showed cell orientation dependency for features in the cell range dimension, a behaviour significantly different from that of a previously studied cell model (osteoprogenitor cell). This model may be a promising in so far as it is very rapid (a time frame less than a second per square centimeter of micropatterned surface) and provides further insights into the effects of surface microtopography on cell response with possible applications in the field of biosensors, biomedical and/or pharmaceutical engineering sciences.     

Optical potential theory of diatom-diatom scattering. II. Indistinguishable molecules

The theory of vibro-rotational energy exchange in “indistinguishable” diatom-diatom scattering is formulated in terms of effective potentials. Due the necessity of considering both “symmetric” and “antisymmetric” molecular two-particle states, the formalism has a characteristic (two-by-two matrix structure. A mathematical generalization of Schwinger's theory of sources allows a compact derivation of exact and approximate expressions for t “optical” and “transition” potentials of elastic and inelastic processes, respectively. Finally, considerations based on a partial wave analysi of the working equations, suggest that the present theory should be more readily amenable to numerical implementations than the close coupling approach     

Pharmaceutical microcalorimetry: recent advances in the study of solid state materials

This paper discusses the theory and experimental application of microcalorimetry to the study of solid state reactions of pharmaceutical importance. The practical example selected is that of formulated products containing benzoyl peroxide – a treatment for acne and athlete’s foot. A newly developed procedure for data analysis is outlined and preliminary results from chemometric-based analysis of complex solid state reaction schemes is presented. Finally, the microcalorimetric requirements for such stability studies are contrasted with the newly emerging multi-channel “chip calorimeters” that operate in the nano range (watts, material, concentration) with high throughput potential.     

Intermolecular vibrational energy transfer of highly excited CF3I molecules observed from transient UV absorption spectra

Intermolecular vibrational energy transfer of highly excited CF₃I molecules by probing of the UV absorption band has been studied. The value of the rate constant of V---V exchange between ensembles of “hot” and “cold” molecules has been found to be 2 ± 0.4 μs⁻¹ Torr⁻¹. Consideration has been given to the effect of this process on isotopic selectivity loss in isotope separation by the method of successive IR-UV molecular photodissociation.     

Future potential of targeted component analysis by multidimensional liquid chromatography-mass spectrometry

Multidimensional liquid chromatography (MDLC) may be used in either (i) the profiling mode where it is the objective to fractionate all components in a mixture or (ii) the targeted component mode in which it is the objective to determine specific analytes. This paper focuses on targeted component analysis from complex mixtures, addressing the critical operations of analyte selection and transport from the first to the second dimension. Although the physical operation of switching a component into the second dimension with computer controlled valving is simple, it is shown that changes in analyte retention time and peak width with column age and fouling are a serious problem. The analyte moves out of the preselected time window for valve switching and quantitation is compromised in the second dimension. It is proposed that a solution to the “drifting peak” phenomenon in targeted component analysis is to use binary mobility elution in the first dimension. Binary mobility refers to those systems, such as affinity chromatography, in which analyte mobility is generally either 0 or 1 relative to mobile phase velocity. Coupling these binary changes in analyte mobility in the first dimension with valve switching eliminates the “drifting peak” phenomenon. In addition, it is shown that a wide time window may be used in affinity separations without compromising the separation or accumulating contaminants. Several cases are described in which immunosorbents were used with reversed phase columns to provide quantitative targeted component analyses from complex mixtures.     

Evidence for a gauche minor conformer of 1,3-butadiene

We present experimental Raman data on torsional transitions that prove that the less stable conformer of 1,3-butadiene has a gauche structure. It is shown that in order to predict the relative intensities of the “gauche” transitions with respect to the “trans” transitions, one has to include a second-order term in the Fourier expansion of the molecular polarizability.     

Evaluation of the surface tension measurement of axisymmetric drop shape analysis (ADSA) using a shape parameter

A quantitative criterion called “shape parameter” to evaluate the quality of surface tension measurement of Axisymmetric Drop Shape Analysis (ADSA) is presented. ADSA is a powerful technique for the measurement of interfacial tensions and contact angles of pendant drops, sessile drops, and bubbles. Despite the general success of ADSA, deficient results may be obtained for drops close to spherical shape. Therefore, the “shape parameter” was used to determine the range of drop shapes in which ADSA succeeds or fails. The “shape parameter” is a dimensionless parameter that expresses quantitatively the difference in shape between a given experimental profile and an inscribed circle. The surface tension measurements of ADSA were evaluated for both pendant drop and constrained sessile drop configurations using the shape parameter. Different shapes of the pendant drop were studied using different sizes and materials of holders. For each drop configuration, a “critical shape parameter” was defined based on the minimum value of the shape parameter that guarantees an error of less than ±0.1 mJ/m². Furthermore, the effects of the type of liquid and constellation on the “critical shape parameter” were studied.     

Predictive aging results in radiation environments

We have previously derived a time-temperature-dose rate superposition methodology, which, when applicable, can be used to predict polymer degradation versus dose rate, temperature and exposure time. This methodology results in predictive capabilities at the low dose rates and long time periods appropriate, for instance, to ambient nuclear power plant environments. The methodology was successfully applied to several polymeric cable materials and then verified for two of the materials by comparisons of the model predictions with 12 year, low-dose-rate aging data on these materials from a nuclear environment. In this paper, we provide a more detailed discussion of the methodology and apply it to data obtained on a number of additional nuclear power plant cable insulation (a hypalon, a silicone rubber and two ethylene-tetrafluoroethylenes) and jacket (a hypalon) materials. We then show that the predicted, low-dose-rate results for our materials are in excellent agreement with long-term (7–9 year) low-dose-rate results recently obtained for the same material types actually aged under bnuclear power plant conditions. Based on a combination of the modelling and long-term results, we find indications of reasonably similar degradation responses among several different commercial formulations for each of the following “generic” materials: hypalon, ethylene-tetrafluoroethylene, silicone rubber and PVC. If such “generic” behavior can be further substantiated through modelling and long-term results on additional formulations, predictions of cable life for other commercial materials of the same generic types would be greatly facilitated.     

ISO radiation sterilization standards

This presentation provides an overview of the current status of the ISO radiation sterilization standards. The ISO standards are voluntary standards which detail both the validation and routine control of the sterilization process. ISO 11137 was approved in 1994 and published in 1995. When reviewing the standard you will note that less than 20% of the standard is devoted to requirements and the remainder is guidance on how to comply with the requirements.

Future standards developments in radiation sterilization are being focused on providing additional guidance. The guidance that is currently provided in informative annexes of ISO 11137 includes: device/packaging materials, dose setting methods, and dosimeters and dose measurement, currently, there are four Technical Reports being developed to provide additional guidance:

1. 1. AAMI Draft TIR, “Radiation Sterilization Material Qualification”

2. 2. ISO TR 13409-1996, “Sterilization of health care products — Radiation sterilization — Substantiation of 25 kGy as a sterilization dose for small or infrequent production batches”

3. 3. ISO Draft TR, “Sterilization of health care products — Radiation sterilization Selection of a sterilization dose for a single production batch” li]4. ISO Draft TR, “Sterilization of health care products — Radiation sterilization-Product Families, Plans for Sampling and Frequency of Dose Audits.”

     

Can triorganoboroxins exist in a “monomeric” R---B=O form? MNDO calculations and ebulliometric molecular weight determination

MNDO calculations were made for triethylboroxin (EtBO)₃ and triphenylboroxin (PhBO)₃ using both X-ray determined and optimized geometry of these molecules. The results were compared with hypothetical “monomeric” molecules R---B=O. Calculated energies of trimerization are about −200 kJ mol⁻¹ for both compounds and confirm the much higher stability of the “trimer”. Ebulliometric determination of molecular weight of triphenylboroxin in 2-pentanone confirms its trimeric character.     

Consumer attitudes to radiation and irradiated potatoes at “radiation fair” in Osaka, Japan

“Radiation Fair” has been held in summer vacation season in August for more than 10 years in Osaka, the largest city of western Japan, for the purpose of public education and information transfer of radiation and radiation-related technology. We distributed questionnaires to the visitors for recent 3 years to inquire their status toward radiation and irradiated products including irradiated potatoes as well as impression toward the displays. According to the survey results, more than 60% of the kids visitors were satisfied with this exhibition as informative, more than half of the older visitors (16 years old and upward) indicated that they recognized the word of “radiation” when they were at elementary school and the most significant sources of this information were school lessons and the mass media. Consumer's image toward radiation seems to shift to more “positive” when correct knowledge about radiation is given. More than half of consumers did not know “irradiated potatoes” but the percentage indicating that irradiated potatoes was definitely hazardous was less than 10%.     

Calorimetric study and modeling of molecular mobility in amorphous organic pharmaceutical compounds using a modified Adam-Gibbs approach

The purpose of this study is to provide a quantitative characterization of the thermal behavior of amorphous organic pharmaceutical compounds across their glass transition temperature, and to assess their molecular mobility as a function of temperature and time by combining theoretical simulations with experimental measurements using differential scanning calorimetry. A computational approach built on the Boltzmann superposition principle of nonexponential decay and the Adam-Gibbs theory of entropic-dependent structural relaxation is presented. The heat capacities of the crystalline and amorphous forms are incorporated into the simulation in order to accurately assess the entropic fictive temperature as functions of temperature and time under any arbitrary set of experimental conditions. Using this method, we evaluated properties of the glass former, D and T0, and the nonexponentiality index beta, for amorphous salicin, felodipine, and nifedipine, by fitting the simulated glass transition profile with the experimentally determined heat capacity across the glass transition region. From this fit, the evolution of the relaxation time of the model compounds following any thermal cycle, including heating, cooling, and isothermal holds can then be estimated a priori. This study reveals the profound and inextricable effect of thermal history on the molecular mobility of the amorphous materials, and the ability of the glass to undergo fast changes in its molecular motions over an aging process even at low temperatures.     

基于蒽衍生高迁移率发光材料的研究进展

高迁移率发光有机半导体材料是实现有机发光场效应晶体管(OLETs)的重要材料,但其设计合成面临巨大挑战.本文综合评述了近年来高迁移率发光材料,特别是基于蒽的高迁移率发光材料的研究进展,重点介绍了目前报道的20余种基于蒽的高迁移率发光有机半导体材料,包括分子的设计策略、相关的光电性能及其在OLETs器件方面的应用研究,以便为进一步的相关研究提供有意义的指导和借鉴.本文还对该领域未来发展的挑战、发展方向及机遇进行了简单评述.     

Zur nomenklatur der phane—II

The new term “Phanes” has been clearly defined and a nomenclature system tentatively developed. This system is comprehensible and of general application and at the same time relatively simple. The notations “nucleus”, “bridge”, “number of bridge members” and “number of ring members” are defined. In order to get a definite characterisation of the phanes which contain a carbocyclic nucleus, a carbocyclic and heterocyclic bridge the following terms: “carbophanes”, “carba-phanes” and “hetera-phanes” have been newly introduced. The prefix “hetera-” has been proposed as a general expression and as a representative term for the syllables “aza-”, “oxa-”, “thia-” and so on. The so called “a-nomenclature” is clearly called “hetera-nomenclature”. The new expressions “heteralogous” and “substitulogous” are explained. As the various examples will show, the “Phane-Nomenclature” can also be applied to the naming of complicated metallocenophanes.