A study on the surface free energy of modified silica fillers and poly(ethylene terephthalate) fibers by inverse gas chromatography

The surface free energy of modified silica fillers and poly(ethylene terephthalate) (PET) fibers was analyzed by inverse gas chromatography in order to investigate the relationship between their surface characteristics and the performance of the composite formed from these materials. The adsorption isotherms of n-heptane and 1-propanol were determined by the elution-peak-maximum method. The dispersive and polar components of the surface free energy were determined by use of the Young–Dupré equation and the Fowkes equation on the basis of the saturated spreading pressure derived from the Gibbs adsorption equation. The acidity and the basicity of the surface were estimated by the specific retention volume of each probe molecule with different donor number and acceptor number. It was found that the dispersive component of the surface free energy for modified silica fillers was mostly lower than that for original silica filler. The polar component of the surface free energy for ethylene glycol modified silica filler became large, while that for n-butanol modified silica filler decreased remarkably. It was also found that original silica filler exhibited high acidity, while modified silica fillers exhibited low acidity. Although these methods have been applied to PET fibers, the surface free energy could not be determined quantitatively because of the surface change during the pretreatment of PET fibers. It was observed that the polar component of the surface free energy decreased when the pretreatment was made at a temperature higher than the glass-transition temperature of PET. It became clear that the interaction between modified silica fillers and PET fibers correlated well with the basicity of the fillers, but not with their acidity. Received: 18 October 1999 Accepted: 8 February 2000     

How silanization of silica particles affects the adsorption of PDMS chains on its surface

A series of six fumed silica types, with different surface areas in the 50–400 m²/g range, were modified by grafting with trimethylchlorosilane. The grafting reaction was controlled by elemental analyses, surface hydroxyl titration, and combustion techniques. The silica surface energy was determined as a function of silanization degree by inverse gas chromatography (IGC). Adsorption of a series of poly(dimethylsiloxane) elastomers with molecular weights ranging between 4 and 420 kg/mol on silica was followed using flow microcalorimeter (FMC). IGC results show that free adsorption energies of two series of alkanes and siloxanes as well as the dispersive component of the surface energy were found to decrease monotonously with surface silanization and so does the polymer molar heat of adsorption. FMC results indicate, however, that the conformation of the macromolecules on silica depends on the silica surface area but remains unaffected by the surface treatments. A given polymer chain was found to remain adsorbed on the surface preserving its same conformation until its molar heat of adsorption falls bellow a critical value. These findings offer a better monitoring of surface–polymer interactions as it defined a comprehensive relationship between the degree of modifications of the filler surface and polymer adsorption conditions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

An inverse gas chromatography study of the adsorption of organics on nickel- and copper-hexacyanoferrates at zero surface coverage

The surface properties of Ni and Cu hexacyanoferrates were investigated by the inverse gas chromatography method. Retentions of 10 organic compounds were measured at zero surface coverage in the temperature range 80 to 95 degrees C. The gas/solid partition coefficients and the related thermodynamic data of adsorption (standard free energy change, standard state enthalpies, and entropy changes) also at zero surface coverage were determined. The dispersive component of free surface energy of both hexacyanoferrates, at investigated temperatures, was calculated. The surface acid/base properties were also evaluated using polar adsorbates and the results obtained indicate that nickel hexacyanoferrate is more acidic than copper hexacyanoferrate.     

In Situ Observation of Growth Process of alpha-L-Glutamic Acid with Atomic Force Microscopy

The surface and adsorption characteristics of carbon blacks treated with H(3)PO(4), KOH, and C(6)H(6) were investigated. The equilibrium spreading pressure (pi(e)), surface energy (gamma(s)), and specific surface area (S(BET)) were studied by the BET method with N(2) adsorption. In this work, an interpretation based on the nitrogen amount adsorbed for filling a monolayer (a(0)) was proposed for the determination of the Gibbs free energy of nitrogen adsorption, allowing evaluation of the equilibrium spreading pressure or London dispersive component of the surface free energy of the carbon blacks studied. Also, the microstructures of the carbon blacks treated were investigated by transmission electron microscopy. Acidic treatment led to significant decreases in adsorption amount, S(BET), and surface free energy of the carbon blacks, due to aggregation of the microstructures and increasing weight of the swollen specimen in an equilibrium state. Polar basic and nonpolar chemical treatments resulted in an increase of the equilibrium spreading pressure or London dispersive component of surface free energy of the carbon blacks without significantly changing the surface and adsorption properties and microstructures. Results from the surface energetics and parameter of polymer-filler interaction (chi) showed that the tearing energy of the composites is greatly dependent on the carbon blacks studied in the treatment. Copyright 2000 Academic Press.     

Surface characterization of poly(methyl methacrylate-co-n-butyl acrylate-co-cyclopentylstyryl-polyhedral oligomeric silsesquioxane) by inverse gas chromatography

The surface properties of poly(methyl methacrylate-co-n-butyl acrylate-co-cyclopentylstyryl polyhedral oligomeric silsesquioxane) (poly(MMA-co-BA-co-styryl-POSS)) were studied by means of inverse gas chromatography (IGC) using 10 non-polar and polar solvents as the probes. Thermodynamic parameters of adsorption, e.g., specific retention volume, the dispersive component of the surface free energy, the specific interaction contribution to the free energy of adsorption and the acid/base constants were obtained to investigate the interactions between the surfaces of the copolymers and different solvents. It was found that incorporation of styryl-POSS into polymer resulted in increasing interactions between polymers and solvents, dispersive component of surface free energy of polymer and acidity of the surfaces of the polymers. The more the styryl-POSS were embedded, the stronger the interaction between the polymer surface and solvent, the dispersive component of the surface free energy and the acidity of the polymer surface were.     

Study of modified silicas by inverse gas chromatography. Influence of chain length on the conformation of n-alcohols grafted on a pyrogenic silica

Summary A fumed silica surface was systematically modified by the grafting of n-alkyl chains with increasing carbon numbers. The samples were characterized by the dispersive component of the surface energy, their specific interaction potential and enthalpies of adsorption of polar, in particular, alcohol probes. It is shown that the variation of the surface properties and adsorption capacities depend on the chain length of the graft. For instance, minimum values are recorded when the surface coverage by methylene groups corresponds either to one or two CH₂ surface layers. This behaviour is related to the mobility of the grafted alkyl chains, mobility which was examined by solid state NMR.     

Investigation of acid–base and surface characteristics of a thermotropic semifluorinated salicylaldimine liquid crystal by inverse gas chromatography

The surface energy of a semifluorinated salicylaldimine liquid crystal has been characterised by inverse gas chromatography over the temperature range 303 to 323 K using n-alkanes, tetrahydrofurane, dichloromethane, chloroform, acetone and ethyl acetate molecular probes. The dispersive component of the surface free energy of the adsorbent surface studied was calculated according to the approaches of Fowkes and Dorris–Gray in the infinite dilution region. The specific free energy, enthalpy and entropy of adsorption of polar probes on the liquid crystal were determined. The values of the specific enthalpy of adsorption were correlated with both the donor and the acceptor numbers of the probes to quantify the acidic and the basic parameters of the liquid crystal surface. The surface of the semifluorinated salicylaldimine liquid crystal was found to show a basic nature, which determined the nature of its interaction with the polar probes.     

Dependence of surface properties of silylated silica on the length of silane arms

Amorphous precipitated Zeosil 1165 MP silica was silylated with low grafting degrees of organosilicons bearing different alkoxy and hydrocarbon tails, like monomethoxy(dimethyl)octadecylsilane (DMODMS), monomethoxytrimethylsilane (TMMS), trimethoxymercaptopropylsilane (MPTS), and 3-octanoylthio-1-propyltriethoxysilane (NXT^?). Thermogravimetry and Elemental Analysis were used to determine the degree of silane grafting and the final number of free silanol OH groups/nm² on the modified Zeosil surface. Free energy, enthalpy and entropy of adsorption of hydrocarbon probes were determined by Inverse Gas Chromatography at infinite dilution and dispersive component, $\gamma_{s}^{d}$ , and specific interaction parameter, I ^sp , of the surface tension of the silica surface were calculated. Silylation changes the hydrophilic character of Zeosil silica to the hydrophobic one, on increasing the grafting degree and, mainly, the length of hydrocarbon tail of the silane molecule (DMODMS and NXT^?). The long hydrocarbon tails practically shield the silica particle surface and the adsorbed probes preferentially interact with them. In the case of TMMS-Zeosil the adsorbed probes practically interact with the silica surface, with loss of entropy well above that of the bare silica, while being equal the values of the enthalpy of adsorption. All the other modified silicas show loss of entropy lower than that of bare silica. Steric hindrance, played by the presence of methyl groups of TMMS, is suggested to reduce the freedom of translational and rotational movements of the adsorbed probe.     

Characterization,by inverse gas chromatography,of the surface properties of calcium carbonate before and after treatment with stearic acid

Summary The interaction of n-alkanes with stearyl chains chemically fixed on the surface of calcite particles is investigated using inverse gas chromatography. Free enthalpy, enthalpy, entropy of adsorption and dispersive component of the surface free energy are determined. Untreated and stearic acid treated calcites have comparable affinities for the alkanes. However, the differences in adsorption entropies point to different interaction mechanisms: gas-solid adsorption for the untreated calcite and gasliquid interactions for the modified sample. Furthermore, for long chains probes, having more than 8 carbon atoms, the loss in entropy is smaller than for shorter chains. Possibly, long chains are only partially inserted in between the stearyl grafts, thus keeping a higher degree of freedom.     

Effect of acidic surface treatment of red mud on mechanical interfacial properties of epoxy/red mud nanocomposites

In this work, red mud (RM) was chemically modified by 0.1, 1, and 5 M H(3)PO(4) solution to prepare epoxy/RM nanocomposites. The effect of chemical treatment on a RM surface was studied in terms of pH, acid-base values, N(2)/77 K gas adsorption, equilibrium spreading pressure (pi(e)), and surface free energy. The mechanical interfacial properties of epoxy/RM nanocomposites was measured in the context of critical stress intensity factor (K(IC)) and critical strain energy release rate (G(IC)) measurements. From the experimental results, the acidic surface treatment led to a modification of the RM surface properties, such as the surface acid values, porosity, specific surface area, pi(e), and London dispersive component (gamma(S)(L)) of surface free energy of the treated RM as an increase of the treatment concentration. In the fracture toughness (K(IC) and G(IC)) measurements, the mechanical interfacial properties of epoxy/treated RM nanocomposites were intimately correlated with the improvement of interfacial adhesion between the RM surface and a matrix and the increase of gamma(S)(L) of surface free energy of the RM due to the development of S(BET) or porosity of RM surfaces.     

Adsorption of cationic cellulose derivative/anionic surfactant complexes onto solid surfaces. II. Hydrophobized silica surfaces

The effect of the anionic surfactant SDS (sodium dodecyl sulfate) on the adsorption behavior of cationic hydroxyethyl cellulose (Polymer JR-400) and hydrophobically modified cationic cellulose (Quatrisoft LM-200) at hydrophobized silica has been investigated by null ellipsometry and compared with the previous data for adsorption onto hydrophilic silica surfaces. The adsorbed amount of LM-200 is found to be considerably larger than the adsorbed amount of JR-400 at both surfaces. Both polymers had higher affinity toward hydrophobized silica than to silica. The effect of SDS on polymer adsorption was studied under two different conditions: adsorption of polymer/SDS complexes from premixed solutions and addition of SDS to preadsorbed polymer layers. Association of the surfactant to the polymer seems to control the interfacial behavior, which depends on the surfactant concentration. For the JR-400/SDS complex, the adsorbed amount on hydrophobized silica started to increase progressively from much lower SDS concentrations, while the adsorbed amount on silica increased sharply only slightly below the phase separation region. For the LM-200/SDS complex, the adsorbed amounts increased progressively from very low SDS concentrations at both surfaces, and no large difference in the adsorption behavior was observed between two surfaces below the phase separation region. The complex desorbed from the surface at high SDS concentrations above the critical micelle concentration. The reversibility of the adsorption of polymer/SDS complexes upon rinsing was also investigated. When the premixed polymer/SDS solutions at high SDS concentrations (>5 mM) were diluted by adding water, the adsorbed amount increased due to the precipitation of the complex. The effect of the rinsing process on the adsorbed layer was determined by the hydrophobicity of the polymer and the surface.     

Determination of the acid/base properties of MgY and NH4Y molecular sieves by inverse gas chromatography

The surface characterization of MgY and NH(4)Y zeolites was performed using inverse gas chromatography (IGC). The adsorption thermodynamic parameters (the standard enthalpy (DeltaH degrees ), standard entropy change (DeltaS degrees ), and free energy change of adsorption (DeltaG degrees ), the dispersive component of the surface free energies (gamma(S)(d)), and the acid-base character of the surface of MgY and NH(4)Y zeolites were estimated using the retention time of different non-polar and polar probes at infinite dilution region. The specific free energy of adsorption (DeltaG(sp)), the specific enthalpy of adsorption (DeltaH(sp)), and the specific entropy of adsorption (DeltaS(sp)) of polar probes on MgY and NH(4)Y zeolites were determined. The values of the DeltaH(sp) were correlated with both the donor and acceptor numbers of the probes to quantify the acidic K(A) and the basic K(D) parameters of the zeolite surfaces. The values obtained for the K(A) and K(D) parameters indicated a basic character for the surface of MgY and NH(4)Y zeolites.     

INVESTIGATION OF THE INTERACTIONS BETWEEN WATER AND MODIFIED SILICA GEL BY IGC AND TPD

In this work, the thermodynamic parameters for the adsorption of water vapor on untreated silica gel and silica gel treated with hygroscopic salts and silane coupling agent were determined by Inverse Gas Chromatography (IGC) in the infinite dilution region. The desorption activation energies of the water vapor on virgin and modified silica gels were estimated by using the Temperature Programmed Desorption (TPD) technique. The interactions between the water and the virgin and modified silica gels were discussed. Results showed that the thermodynamic parameters and desorption activation energy of water vapour on the silica gels increase with decreasing pore size and increasing the surface hydrophilic properties. The desorption activation energy of virgin and modified silica gels was found to increase with increasing the thermodynamic parameters. The larger the adsorption parameters and the desorption activation energy were, the interactions between water and virgin and modified silica gels were.     

INVESTIGATION OF THE INTERACTIONS BETWEEN WATER AND MODIFIED SILICA GEL BY IGC AND TPD

1. INTRODUCTIONSilica gel is an amorphous inorganic polymer composed of siloxane (Si-O-Si) groups in the inner region and silanol (Si-OH) groups distributed on the surface [1]. Silanol groups can be easily functionalized by different chemical procedures. …     

凹凸棒黏土固载AlCl3的制备、表征及其催化水杨酸乙酰化活性

以凹凸棒黏土（ATP）为载体,采用回流吸附法制备了AlCl3负载型固体酸催化剂AlCl3/ATP,并将其用于催化阿司匹林合成反应。 利用红外光谱、X射线粉末衍射、比表面（BET）、能谱(EDS) 和Hammett指示剂等测试技术对催化剂结构、组成和酸强度进行了表征。 以催化合成阿司匹林收率为考察指标,对影响其催化性能的凹土酸处理浓度、热活化温度、催化剂用量和AlCl3负载量进行优化,并比较了载体和负载前后催化剂的催化性能。 结果表明, ATP经10 mol/L盐酸室温酸化12 h,300 ℃热活化2 h后对AlCl3的负载量达1.18 mmol/g,当AlCl3/ATP用量为水杨酸质量的5%时,其催化阿司匹林合成反应收率达92.5%,高于未负载的AlCl3催化剂及载体本身,且该催化剂重复使用多次仍可保持相当的活性。     

Estimation of the amount of β2-glycoprotein I adsorbed at the inner surface of fused silica capillaries after acidic, neutral and alkaline pretreatment

Sample adsorption to the inner surface of fused silica capillaries is a common problem in CE when analyzing macromolecules and is harmful to the analysis. We previously utilized the pH hysteresis effect of fused silica to facilitate electrophoresis of the strongly adsorbing protein β(2) gpI in plain-fused silica capillaries at neutral pH. In the present paper, the effect of different pretreatments of the capillary on the adsorption of the β(2) -glycoprotein I has been investigated using electroosmosis markers, SDS mobilization, and imaging based on indirect immunofluorescence microscopy for direct visualization. The amount of β(2) gpI adsorbed on the surface was probed using all these independent techniques after electrophoresis at neutral pH on capillaries pretreated with HCl, background electrolyte (BGE), and NaOH. BGE pretreatment was included as a positive control. We found that 80% or more of the starting material was adsorbed to the inner surface of the silica capillaries during electrophoresis after pretreatment with only BGE or with NaOH, but after acidic pretreatment the loss was consistently less than 20%. NaOH most efficiently removes adsorbed protein between runs. A theoretical calculation of the pH change of the BGE showed that electrolysis affects the pH more than the deprotonation of silanols during electrophoresis. We conclude that acidic pretreatment of fused silica capillaries diminishes adsorption of β(2) gpI by decreasing charge-dependent wall adsorption.     

Surface Energy of Silica-TEOS-PDMS Ormosils

Inverse gas chromatography (IGC) was applied to characterize the surface energy of organically modified silicates (ormosils) by measuring the interaction of molecular organic probes with the ormosil surface. Ormosils were prepared by the sol-gel method by the reaction of TEOS (tetraethoxysilane), PDMS (polydimethylsiloxane) and different types of silica (Aerosil 130, Aerosil 200 and Aerosil 380). The isosteric heat of adsorption, q _st, and the dispersive component of the surface energy, _s ^D, were estimated by using the retention volume of different nonpolar and polar probes at infinite dilution. The dispersive component shows an increase as the specific surface area of the silica is increased from 29.6 mJ/m² to 51.4 mJ/m² at 60°C. Such values are lower than that obtained for aerosil particles meaning that PDMS chains impede the interaction with silanol groups located on the silica surface. The specific interaction parameter, I^SP, and the enthalpy of specific adsorption, H _a ^SP, of polar probes on the ormosil surface were also measured in order to obtain the acid-base character of ormosil surface. The H _a ^SP, was correlated with the donor, DN, and the acceptor, AN, numbers of the probes to quantify the acidic, K _A, and the basic, K _B, parameters of the substrate surface. The obtained results suggest that the silica particles were covered by PDMS chains in a different way depending on the type of silica used. The values of K _A and K _B suggest that the ormosil surface is amphoteric, with predominantly acceptor electron sites.     

Submicron particles of SBA-15 modified with MgO as carriers for controlled drug delivery

Submicron particles with modified surface were synthesized by a simple one-pot synthesis approach and used as drug carrier for controlled release. Due to the alkalinity of MgO species on the surface, the amount of a model drug, ibuprofen, adsorbed on the modified surface was increased as compared to pure silica SBA-15 although the surface area was decreased by the surface modification. FTIR investigation indicated that the adsorption state of ibuprofen on MgO modified SBA-15 was different from that on pure silica SBA-15 and pure crystal ibuprofen. The result obtained from in vitro release test exhibited that the surface modification greatly decreased the ibuprofen release rate. In first 6 h in vitro release test, only 63% of the adsorbed ibuprofen was released from the MgO/SBA-15 (Si/Mg=20). In contrast, the release of ibuprofen was complete in 1 h from the pure silica SBA-15 under the same release conditions. The surface modified with MgO created affinity with acidic ibuprofen molecules and retarded the release rate from the mesoporous matrix. In addition, the release rate of ibuprofen could be modulated by varying the content of MgO, and was found to decrease with increasing amount of MgO on surface of SBA-15 submicron particles.     

A model for the cooperative adsorption of surfactant mixtures on solid surfaces

Adsorption of surfactant mixtures on solids is of considerable theoretical and practical importance. In this study, cooperative adsorption of surfactant mixtures of nonyl phenol ethoxylated decyl ether (NP-10) and n-dodecyl-beta-D-maltoside (DM) on silica and alumina has been investigated as a function of the distribution of individual surfactants between solution and solid surface. In the mixed adsorption process, DM is identified to be the "active" adsorbing component and NP is the "passive" co-adsorbing one in the process of adsorption on alumina, while their roles are reversed on silica. A modified model has been proposed to quantify the adsorption behavior of surfactant mixtures and to obtain information in terms of aggregation number and standard free energy for surface aggregation. This model is the first model applied to the aggregation of the surfactant mixture at the solid/solution interfaces.     

Surface characterization of cellulose fibres by XPS and inverse gas chromatography

Inverse gas chromatography (IGC) was used to determine the dispersive component of the free energy as well as the acid-base properties of cellulose fibre surfaces, before and after modification by corona treatment. It was found that the corona treatment increases both the dispersive contribution to surface energy and its acidic character, whereas only a slight increase in its basicity was observed. It was also found that some chemical degradation of the surface occurs at high corona currents. The extent of modification of the surface properties, as revealed by IGC, was correlated to the surface chemical composition deduced from XPS analysis as well as with the electrical conductance and the pH of the water suspensions of the cellulose fibres.