Square‐Wave Voltammetry of the Molybdenum‐1,10 Phenanthroline‐Fulvic Acids Complex: Redox Kinetics Measurements

The reduction process of molybdenum in the presence of fulvic acids and phenanthroline was investigated by square-wave voltammetry (SWV). The mixed-ligand complex of molybdenum exhibits a pronounced tendency to adsorb onto the mercury electrode surface. The electrode reaction proceeds as a surface process in which both components of the redox couple are firmly confined to the electrode surface. The kinetics of the electrode reaction is studied utilizing the properties of “split SW peaks” and “quasireversible maximum”. The kinetic parameters obtained with two different square-wave voltammetric methods are in good agreement. In 0.5 mol/L NaCl solution with pH 2.5 the kinetic parameters are: standard rate constant k_s=8±2 s⁻¹, cathodic electron transfer coefficient α=0.41±0.05, and number of exchanged electrons n=2. The SW kinetic measurements are confirmed by cyclic voltammetric method.     

Study of binary complexes of Cu(II), Ni(II) and Co(II) with sulfamethazine by voltammetry

Cyclic voltammetry (CV) and square-wave voltammetry (SWV) techniques have been used to study the binary complexes of Co(II), Ni(II) and Cu(II) with sulfamethazine (SMZ) at a static mercury drop electrode (SMDE) in 0.04 M Britton-Robinson (B-R) buffer. SMZ gave three peaks at 0.01, −1.32 and −1.55 V. Cu(II)-SMZ complex was recognized by a cathodic peak at −0.38 V. Ni(II)-SMZ complex was reduced at more positive potential (−0.77 V) than that of the hydrated Ni(II) ions (−1.08 V). Co(II)-SMZ complex is investigated at pH 7 and 8. The Co(II) complex at pH 7 is appeared as a shoulder at −1.19 V, whereas this peak becomes a well-separated form at pH 8. The study indicated that the SMZ serves as a catalyst in the reduction of Co(II) and Ni(II) ions. From electronic spectra data of the complexes, their stoichiometries of 1: 2 (metal-ligand) in aqueous medium are determined. The stability constants of the complexes are in agreement with the Irwing-Williams series (Co < Ni < Cu).     

Voltammetric study on interaction of cysteine with type I-collagen in the aqueous medium

Interaction of cysteine with type I-collagen from bovine achilles tendon in the aqueous solutions has been examined using square wave voltammetry (SWV) and cyclic voltammetry (CV) techniques. In the absence of cysteine, type I-collagen gives a reversible peak at ?0.114 V in Britton-Robinson (B-R) buffer (pH 4.0). The electrochemical parameters (I _p/f, E _p/f, E _p/pH, I _p/pH, I _p/v, I _p/v^1/2) of type I-collagen have been also studied. In addition, it has been determined that there is a linear relationship between current and concentration of type I-collagen. On the other hand, cysteine exhibits a reversible peak at ?0.383 V due to the reduction of mercurous cysteine thiolate. By using a hanging mercury drop electrode in aqueous solutions, SWV and CV voltammograms obtained for type I-collagen in the presence of cysteine indicate that there is an interaction between type I-collagen and cysteine. In the presence of cysteine, peak current of type I-collagen decreases and a new peak is observed at ?0.121 V for cysteine which is bonded to type I-collagen.     

Study of the voltammetric behaviour of metam and its application to an amperometric flow system

The electrochemical behaviour of the pesticide metam (MT) at a glassy carbon working electrode (GCE) and at a hanging mercury drop electrode (HMDE) was investigated. Different voltammetric techniques, including cyclic voltammetry (CV) and square wave voltammetry (SWV), were used. An anodic peak (independent of pH) at +1.46 V vs AgCl/Ag was observed in MT aqueous solution using the GCE. SWV calibration curves were plotted under optimized conditions (pH 2.5 and frequency 50 Hz), which showed a linear response for 17–29 mg L⁻¹. Electrochemical reduction was also explored, using the HMDE. A well defined cathodic peak was recorded at −0.72 V vs AgCl/Ag, dependent on pH. After optimizing the operating conditions (pH 10.1, frequency 150 Hz, potential deposition −0.20 V for 10 s), calibration curves was measured in the concentration range 2.5×10⁻¹ to 1.0 mg L⁻¹ using SWV. The electrochemical behaviour of this compound facilitated the development of a flow injection analysis (FIA) system with amperometric detection for the quantification of MT in commercial formulations and spiked water samples. An assessment of the optimal FIA conditions indicated that the best analytical results were obtained at a potential of +1.30 V, an injection volume of 207 μL and an overall flow rate of 2.4 ml min⁻¹. Real samples were analysed via calibration curves over the concentration range 1.3×10⁻² to 1.3 mg L⁻¹. Recoveries from the real samples (spiked waters and commercial formulations) were between 97.4 and 105.5%. The precision of the proposed method was evaluated by assessing the relative standard deviation (RSD %) of ten consecutive determinations of one sample (1.0 mg L⁻¹), and the value obtained was 1.5%.     

Indirect cathodic reduction of dispersed indigo by 1,2-dihydroxy-9,10-anthraquinone-3-sulphonate (Alizarin Red S)

The indirect cathodic reduction of dispersed indigo (Vat Blue 1) with 1,2-dihydroxy-9,10-anthraquinone-3-sulphonate (Alizarin Red S) as soluble mediator system was studied in 0.1 M NaOH by cyclic voltammetry, voltammetry in a flow cell and in galvanostatic reduction experiments. In cyclic voltammetry, the presence of 17.1 mM indigo led to an increase in the diffusion-controlled cathodic peak current (I _p)_d by a factor of 2. During the reverse scan of the voltammograms the oxidation of reduced indigo could be observed at −650 mV (vs. Ag/AgCl, 3 M KCl). In voltrammograms of 4.0 mM ALS in 0.1 M NaOH, recorded in a flow cell, a current density of 0.40–0.46 mA cm⁻² was determined for the diffusion-controlled cathodic current plateau, which appeared in the potential range of −850 to −1,050 mV. In galvanostatic batch electrolysis, solutions containing 2.5–3.8 mM reduced indigo were prepared and analysed by spectrophotometry and tested in dyeing experiments. The dyeing behaviour of the reduced indigo was independent of the reduction technique used. Energy consumption for electrochemical reduction of 1 kg of indigo could be estimated to 6.5 kWh kg⁻¹.     

An electroanalytical study of the drug proflavine

A square wave adsorptive stripping voltammetric (SWAdSV) method was developed for the determination of proflavine. The electrochemical behaviour of proflavine was investigated by cyclic (CV) and square wave voltammetry (SWV) at the hanging mercury drop electrode (HMDE) and carbon paste electrode (CPE). Different parameters were tested to optimize the conditions of the determination. Better results were obtained by square wave voltammetry using CPE where two oxidation and a reduction peak, appeared, at 0.19, 0.94 and 0.20 V, respectively. The peak at 0.19 V is quasi-reversible and deposition dependent. Linearity was observed in the range of (0.2–23.4) × 10⁻⁸ M (r = 0.998) during the anodic scan and in the range of (1.17–117) × 10⁻⁸ M (r = 0.999) during the cathodic scan. The second peak at 0.94 V is irreversible and deposition independent. The linearity of this peak was observed in the range of (1.29–11.7) × 10⁻⁸ M (r = 0.998). The method was applied to the analysis of bovine serum and gave satisfactory results. Correspondence: S. Th. Girousi, Laboratory of Analytical Chemistry, Department of Chemistry, Aristotle University, Thessaloniki 54124, Greece     

Electrochemical properties and square-wave voltammetric determination of pravastatin

The electrochemical reduction and adsorptive voltammetric behaviour of pravastatin have been studied by means of cyclic and square-wave voltammetry at a hanging mercury-drop electrode in electrolytes of different pH. Within the entire pH range (2.0–9.0) in Britton–Robinson buffer, pravastatin gave rise to a single voltammetric peak in the potential interval from −1.22 to −1.44 V, depending on pravastatin concentration. It was found that the reduction of pravastatin proceeds via a relatively stable intermediate, which is transformed to the final electroinactive product by a coupled chemical reaction or can be re-oxidized back to pravastatin. The rate of chemical transformation is controlled by the proton concentration. The electrode mechanism has the properties of a surface redox reaction. A sensitive analytical method for trace analysis of pravastatin based on the adsorptive stripping technique has been developed. The calibration plot was linear in the range 8×10⁻⁸–5×10⁻⁷ mol L⁻¹. Application of the square-wave voltammetric method to determination of pravastatin in a pharmaceutical dosage form, without sample pretreatment, resulted in acceptable deviation from the stated concentration.     

Preconcentration of the lipid-lowering drug lovastatin at a hanging mercury drop electrode surface

Adsorption and reduction of lovastatin were investigated by cyclic and square-wave voltammetry on a hanging mercury drop electrode in aqueous solutions over a wide pH range (4–9). The electroreduction of lovastatin proceeds via a surface EC mechanism in the whole pH range investigated. Using adsorptive stripping voltammetry, the drug yielded a well-defined voltammetric response in Britton-Robinson buffer, pH 6 at −1.49 V which can be used to determine trace amount of lovastatin. The linear concentration range of application was 1.0 × 10⁻⁸–1.0 × 10⁻⁷ M by using an accumulation potential of −0.5 V and a 90 s pre-concentration time. The method has been successfully applied for the determination of lovastatin in a spiked human serum sample.     

Simultaneous square-wave voltammetric determination of riboflavin and folic acid in pharmaceutical preparations

The square-wave voltammetric (SWV) behaviour of riboflavin and folic acid was studied at a static mercury drop electrode by square wave voltammetry. In 0.05M KCl (pH 5.89) a cathodic scan gave peaks at — 0.56 and — 0.87 V vs. Ag/AgCl for riboflavin and folic acid, respectively. The reduction peak currents are linearly dependent on the concentration of vitamins. Both vitamins can be simultaneously determined from the same voltammogram. The method proposed for the determination of riboflavin and folic acid in multivitamin tablets is very simple, rapid and does not involve time-consuming separation steps. The average contents of riboflavin and folic acid were found to be 14.8 ± 1.26% and 1.46 ± 2.66%, for tablet A and 9.86 ±1.40% and 1.47 ± 2.0% for tablet B, respectively.     

Density functional theory study on electrochemical reduction of 2,4-dinitrophenol

Electrochemical reduction of 2,4-dinitrophenol was investigated by cyclic voltammetry (CV), square-wave voltammetry (SWV) and in situ UV-vis spectroelectrochemistry. The reduction peaks for 2,4-dinitrophenol predicted using density functional theory (DFT) method (B3LYP) with 6–31++g(d) and 6–31++g(d,p) basis sets are consistent with the experimental values. The reduction mechanism of 2,4-dinitrophenol is discussed.     

Electrochemical determination of muscle relaxant drug tetrazepam in bulk form,pharmaceutical formulation,and human serum

Tetrazepam dissolved in the Britton-Robinson universal buffer of various pH values (2.5–11.5) containing 10 vol. % of ethanol was reduced at the mercury electrode in a single 2-electron irreversible step due to reduction of the 4,5 C=N double bond of the seven-membered ring. Differential pulse polarography (DPP) and adsorptive cathodic stripping voltammetry (AdCSV) techniques (Linear sweep LS, differential pulse DP and square-wave SW modes) for quantification of tetrazepam in bulk form and in myolastan tablets are presented. Moreover, the described linear sweep, differential pulse, and square-wave adsorptive cathodic stripping voltammetry was successfully applied in quantification of tetrazepam in spiked human serum without any prior extraction of the drug. The obtained results showed an increased sensitivity of the described electro-analytical procedures for the quantification of tetrazepam in the following order DPP, DP-AdCSV, LS-AdCSV, and SW-AdCSV, since the observed limits of tetrazepam quantitation by these electroanalytical techniques were 5 × 10⁻⁶ mol L⁻¹, 3 × 10⁻⁷ mol L⁻¹, 1 × 10⁻⁸ mol L⁻¹, and 3 × 10⁻⁹ mol L⁻¹, respectively.     

Synthesis, electrochemistry, thin-layer UV-vis and fluorescence spectroelectrochemistry of a new salicylaldimine ligand and its copper complex

The new asymmetric, fluorescent Schiff-base ligand, N-(pyrene)-salicylaldimine (L), and its copper complex having an ONNO donor set, [Cu(L) ₂ ], were synthesized and characterized using elemental analysis, IR, UV-vis, ¹H and ¹³C-NMR spectroscopies. Their electrochemical and spectroelectrochemical behaviors were investigated in a detail by using cyclic voltammetry (CV), square wave voltammetry (SWV), in-situ UV-vis, and fluorescence spectroelectrochemistry. The formation of the complex was monitored by the in-situ fluorescence technique based on the quenching of the fluorescence-probe ligand. Electrochemical studies showed that L exhibits a single irreversible reduction process. However, the SWV indicated that this process was not totally irreversible in the time scale of the measurement. The cathodic peak potential of the reduction process occurred at E _pc = −1.35 V vs Ag/AgCl (scan rate: 0.025 Vs⁻¹). On the other hand, [Cu(L) ₂ ] showed one quasi-reversible one-electron reduction process in the scan rates of 0.025–0.50 Vs⁻¹, which was assigned to metal-based one-electron process; [Cu(2+)(L)₂] + e⁻ → [Cu(+)(L)₂]⁻. The value of half-wave potential (E _1/2) of the reduction process was −0.54 V vs Ag/AgCl (scan rate: 0.025 Vs⁻¹). The time-resolved spectra showed, when the potential (E _app = −1.60 V) was applied in a thin-layer cell, that the main and shoulder bands of (L) at 385, 336, and 407 nm almost disappeared and a new band at 443 nm with a shoulder formed during the reduction process. No change was observed on the final spectrum of the totally reduced ligand for long period under nitrogen atmosphere, which indicated that the singly reduced species remained stable and was not accompanied by a chemical reaction in the time scale of the spectroelectrochemical measurement. The spectral changes during the reduction process of [Cu(L) ₂ ] confirmed the metal-centered reduction process. The fluorescence intensity of L decreased during the reduction process in the thin-layer cell, as result of the perturbation of the conjugated system of the reduced species.     

Electrochemical investigation of redox reactions of herbal drug-shikonin and its determination in pharmaceutical preparations

The electrochemical behaviour of the anticancer herbal drug shikonin was investigated at glassy carbon electrode in 0.16 M HAc-NaAc (20% ethanol, pH 3.98) buffer solution using cyclic voltammetry, square-wave voltammetry and chronocoulometry. Shikonin gives a pair of quasi-reversible redox peaks at potentials of E _pc = 0.698 V and E _pa =0.632 V by absorption-controlled process at a scan rate of 100 mV/s. The electrode process dynamics parameters (saturated adsorptive amount Γ, charge transfer coefficient α, and apparent rate constant K _s) and reaction mechanism were also investigated with result of two electrons and two hydrogen ions participating in electrode reaction. The experimental conditions were optimized for the determination of shikonin and the square-wave anodic peak currents were linearly related to the shikonin concentrations in the range from 2.08 × 10⁻⁸ to 1.82 × 10⁻⁶ M with correlation coefficient of 0.998 and detection limit of 7.8 × 10⁻⁹ M. Using the established method without pretreatment and pre-separation, shikonin in herbal drug Gromwell Root was determined with satisfactory result.     

Electrochemical behavior and voltammetric determination of metol using a multiwall carbon nanotubes modified electrode

Electrochemical behavior of metol, which coexists with p-benzeneiol (HQ) at a glassy-carbon electrode modified with multiwall carbon nanotubes (MWNT/GCE), is studied in the thesis. The results indicate that metol yields a well-defined peak of which two concomitant reductive peaks separate and the potential separation reaches to 178 mV, and that concomitant HQ has almost no interference with the reduction signal of metol. The values of the reductive peak current (I _pc) are found to be linearly related to metol concentration over the range of 8.0 × 10⁻² −1.0 × 10⁻⁵ M, with a detection limit of 5.0 × 10⁻⁶ M. Some common matter has no interference with the determination of metol. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 1, pp. 31–35. The text was submitted by the authors in English.     

Electrochemical evaluation and determination of antiretroviral drug fosamprenavir using boron-doped diamond and glassy carbon electrodes

Fosamprenavir is a pro-drug of the antiretroviral protease inhibitor amprenavir and is oxidizable at solid electrodes. The anodic oxidation behavior of fosamprenavir was investigated using cyclic and linear sweep voltammetry at boron-doped diamond and glassy carbon electrodes. In cyclic voltammetry, depending on pH values, fosamprenavir showed one sharp irreversible oxidation peak or wave depending on the working electrode. The mechanism of the oxidation process was discussed. The voltammetric study of some model compounds allowed elucidation of the possible oxidation mechanism of fosamprenavir. The aim of this study was to determine fosamprenavir levels in pharmaceutical formulations and biological samples by means of electrochemical methods. Using the sharp oxidation response, two voltammetric methods were described for the determination of fosamprenavir by differential pulse and square-wave voltammetry at the boron-doped diamond and glassy carbon electrodes. These two voltammetric techniques are 0.1 M H₂SO₄ and phosphate buffer at pH 2.0 which allow quantitation over a 4 × 10⁻⁶ to 8 × 10⁻⁵ M range using boron-doped diamond and a 1 × 10⁻⁵ to 1 × 10⁻⁴ M range using glassy carbon electrodes, respectively, in supporting electrolyte. All necessary validation parameters were investigated and calculated. These methods were successfully applied for the analysis of fosamprenavir pharmaceutical dosage forms, human serum and urine samples. The standard addition method was used in biological media using boron-doped diamond electrode. No electroactive interferences from the tablet excipients or endogenous substances from biological material were found. The results were statistically compared with those obtained through an established HPLC-UV technique; no significant differences were found between the voltammetric and HPLC methods.     

In vitro study of the interaction of cysteine with a thiazide diuretic (hydrochlorothiazide) at different ph by voltammetric and spectroscopic techniques

The interaction of cysteine (RSH) with a thiazide diuretic, hydrochlorothiazide (HCTZ) was characterized by UV-Vis absorption spectroscopy and square-wave voltammetry in Britton-Robinson (B-R) buffer solution (with pH 5, 7 and 9). On the square-wave voltamogram of cysteine, the reduction peak current of mercurous cysteine thiolate (Hg₂(RS)₂) decreased and its peak potential shifted to more positive values with the addition of HCTZ. This results showed that the RSH interacted with HCTZ. The stoichiometry of HCTZ-RSH molecular complex was determined by voltammetric data with the result of 1: 1. By using linear regression analysis of the voltammetric data at pH 5, 7 and 9, the apparent formation constants of HCTZ-RSH complex were calculated to be 9.54 × 10³, 2.80 × 10⁴ and 2.55 × 10⁴ M^?1, respectively. At the same time, this interaction was also supported by UV-Vis spectroscopic measurements. According to the voltammetric and spectroscopic results, it was suggested that the interaction mode between RSH and HCTZ molecules might be a combination of hydrophobic interactions and hydrogen bonds.     

The influence of different variables on the electrochemical behavior of mild steel in circulating cooling water containing aggressive anionic species

Cyclic voltammetric, potentiodynamic anodic polarization and current–time transient studies were carried out on mild steel in circulating cooling water containing Cl⁻ and SO₄⁻² ions under the effect of different variables such as coolant flow, the availability of oxygen, cooling system temperature, and cooling system pH. The anodic excursion span of mild steel in cooling corrosive solution was characterized by the occurrence of a well-defined anodic peak (A1), while the reverse sweep was characterized by the appearance of two cathodic peaks (C1 and C2). The presence of Cl⁻ and SO₄⁻² ions in cooling water enhance the active dissolution of mild steel and tend to breakdown the passive film and induce pitting attack. The data reveal that increasing flow rate and temperature of cooling solution enhances the anodic peak current density (j _A1) and shifts the pitting potential (E _pit) towards more active values. It is seen that the peak current density of the anodic peak A1 increases and the pitting potential (E _pit) displaced in the noble direction in the aerated solution compared that in de-aerated solution. The pitting corrosion of mild steel by Cl⁻ and SO₄⁻² ions initiates more readily in acidic medium (pH 2.0). It was found that the incubation time (t _i) increase and in turn the pitting corrosion decrease in the order: pH 10 > pH 6.8 > pH 2.0.     

Determination of levofloxacin hydrochloride with multiwalled carbon nanotubes-polymeric alizarin film modified electrode

Multiwalled carbon nanotubes-polymeric alizarin film modified electrode was made. The electrochemical behavior of levofloxacin hydrochloride on modified electrode was studied with cyclic voltammetry, linear sweep voltammetry and chronopotentiometry. The results indicated that the electrical oxidation of levofloxacin hydrochloride on MWNT-PAR electrode, in HAc-NaAc buffer solution at pH 4.2 was irreversible and was controlled by diffusion. Some important parameters m, n, D, E _D, ΔS _rc and ΔH _rc of the electrochemical process were evaluated. Good linearity relationship between peak current and its concentration in the range of 5.0 × 10⁻⁶–1.0 × 10⁻⁴ mol l⁻¹ was found, of which the equation was I _p(A) = −5.456 × 10⁻⁶ 0.2667c, the correlative coefficient r = −0.9976 and detect limitation was 4.0 × 10⁻⁷ mol l⁻¹. The recovery of levofloxacin hydrochloride in levofloxacin hydrochloride injection was between 94.6 and 104.7%.     

Electrochemical Study on Reactive Red 15 and its Interaction with Cyclodextrins

In this paper, the electrochemical behavior of the interaction of Reactive Brilliant Red K-2G (C.I. Reactive Red 15) with cyclodextrins in 0.1 mol · l⁻¹ NaCl (pH 6.9) has been studied by polarography and voltammetry. In a supporting electrolyte of NaCl (pH 6.9), a sensitive second derivative reduction peak (i _p ″) of Reactive Red 15 was found by linear sweep voltammetry (LSV). The peak potential is about −0.78 V (versus SCE). On the addition of CDs into the Reactive Red 15 solution, the reduction peak current (i _p ″) of Reactive Red 15 decreases and the peak potential (E _p ) shifts to a more positive potential. The study shows that Reactive Red 15 can form 1:1 inclusion complexes with nine CDs. The inclusion constants were calculated by “electric current method”. Furthermore, the inclusion ability of different kinds of cyclodextrins was compared, which provided some elemental data for application of Reactive Red 15 and cyclodextrins.     

Square wave voltammetry of nitrofurans in aqueous media using a carbon fiber microelectrode

The nitrofuran compounds exhibit a wide spectrum of biological action, and the understanding of their reduction mechanism can contribute to a better comprehension of their biological action. In this sense, the electrochemical reduction of nitrofurans has been studied through square wave voltammetry (SWV) in aqueous media, having a carbon fiber microelectrode as working electrode. One single cathodic peak in acidic media is registered for all studied drugs (nitrofurazone, nitrofurantoin, and furazolidone), being the hidroxylamine derivative formation linearly dependent on pH. In alkaline media, the peaks reduction is not pH-dependent, but a split of the original into two distinct peaks is observed. The evaluation of the results obtained in unprecedented form by SWV for different alkaline pH media, suggests that the charge transfer process for the R-NO₂ ^?? formation is followed by irreversible chemical reaction, which chacraterizes an EC mechanism.