高压下RhB的相变、弹性性质、电子结构及硬度的第一性原理计算

采用密度泛函理论中的赝势平面波方法系统地研究了高压下RhB的结构相变、弹性性质、电子结构和硬度.分析表明,RhB在25.3 GPa时从anti-NiAs结构相变到FeB结构,这两种结构的弹性常数、体弹模量、剪切模量、杨氏模量和弹性各向异性因子的外压力效应明显.电子态密度的计算结果显示,这两种结构是金属性的,且费米能级附近的峰随着压强的增大向两侧移动,赝能隙变宽,轨道杂化增强,共价性增强,非局域化更加明显.此外,硬度计算结果显示,anti-NiAs-RhB的金属性比较弱,有着较高的硬度,属于硬质材料.     

Prediction study of elastic properties under pressure effect for filled tetrahedral semiconductors LiZnN, LiZnP and LiZnAs

First principle calculations of elastic properties under pressure of the filled tetrahedral semiconductors LiZnN, LiZnP and LiZnAs are presented, using the pseudo-potential plane-waves approach based on density functional theory, within the local density approximation. Elastic constants, bulk modulus, Young’s modulus and Poisson’s ratio are calculated at zero pressure. A linear dependence of the bulk modulus and elastic constants with applied pressure is found. As the experimental elastic constants are not available for LiZnX, we have also calculated the elastic constants of GaN, GaP and GaAs, the binary analogues of LiZnN, LiZnP and LiZnAs, respectively, for checking the reliability and accuracy of our predicted results for LiZnX. The obtained results agree well with the available experimental data.     

First-Principles Calculations of Elastic Properties of LaNi5 Compound

The equilibrium lattice constants, temperature dependence of bulk modulus, the pressure dependence of the normalized volume V/V0, elastic constants Cij and bulk modulus of LaNi5 crystal are obtained using the firstprincipies piane-wave pseudopotential method in the GGA-PBE generalized gradient approximation as well as the quasi-harmonic Debye model. We analyse the relationship between bulk modulus and temperature up to 2000 K and obtain the relationship between bulk modulus B and pressure at diFFerent temperatures. It is found that the bulk modulus B increases monotonously with increasing pressure. Moreover, the pressure dependences of Debye temperatures and the pressure derivatives of lattice constants are also successfully obtained. The calculated results are in agreement with the experimental data and the other theoretical results.     

Elastic Constants of Superconducting MgB2 from Molecular Dynamics Simulations with Shell Model

The elastic constants of superconducting MgB₂ are calculated using a molecular dynamics method (MD) with shell model. The lattice parameters, five independent elastic constants, equations of state (EOS), Debye temperature, and bulk modulus of MgB₂ are obtained. Meanwhile, the dependence of the bulk modulus B, the lattice parameters a and c, and the unit cell volume V on the applied pressure are presented. It is demonstrated that the method introduced here can well reproduce the experimental results with a reasonable accuracy.     

First-Principles Calculations of Elastic Properties of LaNi4.75Sn0.25 Alloys under Pressure

The equilibrium lattice constants, bulk modulus, shear modulus, elastic constants and Debye temperature of LaNi4.75 Sn0.25 under pressure are calculated using the full-potential linearized augmented plane wave （FP-LAPW） method as well as the quasi-harmonic Debye model. The results at zero pressure are in excellent agreement with the experimental data. The Sn atom is found to occupy the equivalent 3g site （0.5a, 0.75b, 0.5c） in the quadruple cell. The Debye temperature of LaNi4.75Sn0.25 is lower than that of LaNi5. The dependences of bulk modulus on finite temperature and on finite pressure are also investigated. The results show that the bulk modulus B increases monotonously as pressure increases.     

ZrV2结构、弹性和热力学性质的第一性原理计算

采用基于密度泛函理论的第一性原理平面波赝势方法研究ZrV₂的晶体结构和弹性,利用准谐Debye模型计算在不同温度(T=0~1200 K)和不同压强(P=0~20 GPa)下ZrV₂的热力学性质,包括弹性模量与压强,热熔与温度,以及热膨胀系数与温度和压力的关系.结果表明:计算的ZrV₂晶格常数与实验值符合较好,晶体材料的弹性常数随着压力增加而增加;在一定温度下,相对体积、热熔随着压强的增加而减小,德拜温度、弹性模量随着压强的增加而增加,且高压下温度对ZrV₂热膨胀系数的影响小于压强的影响.     

Structural and elastic properties of TiN under high pressure

We have investigated the structural and elastic properties of TiN at high pressures by the first-principles plane wave pseudopotential density functional theory method at applied pressures up to 45.4 GPa. The obtained normalized volume dependence of the resulting pressure is in excellent agreement with the experimental data investigated using synchrotron radial x-ray diffraction (RXRD) under nonhydrostatic compression up to 45.4 GPa in a diamond-anvil cell. Three independent elastic constants at zero pressure and high pressure are calculated. From the obtained elastic constants, the bulk modulus, Young's modulus, shear modulus, acoustic velocity and Debye temperature as a function of the applied pressure are also successfully obtained.     

Theoretical investigation of the elastic,electronic, thermodynamic and optical properties of the zinc-blende structure AlN under high pressure

The elastic, electronic, thermodynamic and optical properties of the zinc-blende structure aluminum nitride (AlN) under high pressure have been investigated using first-principles calculations. The dependencies of the elastic constants, the bulk modulus, the shear modulus and energy gaps on the applied pressure are presented, and the results are in good agreement with comparable experimental and theoretical values. Also, the energy band structure and density of states under high pressure have been analysed. Furthermore, the optical constants, including the dielectric function, optical reflectivity, refractive index and electron energy loss, are discussed for radiation up to 50 eV.     

First-principles lattice dynamical study of ScAs and ScSb at zero and high pressure

A first-principles pseudopotential method is used to investigate the structural and elastic properties of ScAs and ScSb in their ambient B1(NaCl) and in high pressure B2 (CsCl) phases and phonon structures at zero and close to phase transition pressure. The calculated lattice constants, static bulk modulus, first order pressure derivative of the bulk modulus and the elastic constants are reported in B1 and B2 structures and compared with available experimental and other theoretical results. The phonon properties of these two compounds are compared among themselves which reveal that these compounds are predominantly metallic, due to degeneracy of optical frequencies at the zone centre. At high pressure, near the B1 to B2 transition, the LA mode at X-point softens leading to structural instability.     

Study of elastic properties of CeO2 by statistical moment method

The purpose of the present paper is to investigate the temperature and pressure dependences of the elastic properties of cerium dioxide using the statistical moment method (SMM). The equation of states of bulk CeO₂ is derived from the Helmholtz free energy, and the pressure dependences of the elastic moduli like the bulk modulus, B_T, shear modulus, G, Young’s modulus, E, and elastic constants (C11, C12, and C44) are presented taking into account the anharmonicity effects of the thermal lattice vibrations. In the present study, the influence of temperature and pressure on the elastic moduli and elastic constants of CeO₂ has also been studied, using three different interatomic potentials. We compare the results of the present calculations with those of the previous theoretical calculations as well as with the available experiments.     

First-Principles Calculations of Elastic Properties of Cubic Ni2MnGa

Dependence of bulk modulus on both pressure and temperature, the elastic constants Cij and the pressure and temperature dependence of normalized volume V/Vo of cubic Ni2MnGa alloy are successfully obtained using the first-principles plane-wave pseudopotential （PW-PP） method as well as the quasi-harmonic Debye model. We analyse the relationship between bulk modulus and temperature up to 800 K and obtain the relationships between bulk modulus B and pressures at different temperatures. It is found that the bulk modulus B increases monotonically with increasing pressure. Moreover, the temperature dependences of the Debye temperature are also analysed. The calculated results are in agreement with the available experimental data and the previous theoreticM results.     

高压下钨弹性和热力学性质的第一性原理研究

本文利用密度泛函理论研究了高压下bcc结构钨的弹性和热力学性质,计算得到钨的晶格常数、体弹模量以及其对压强的一阶偏导与实验值符合较好;在常压下弹性常数计算值与实验值符合较好的基础上,预测了其高压数据.针对钨的固相结构稳定性问题,根据力学稳定判断标准得到0~600 GPa范围内bcc结构是力学稳定的.此外,通过体模量和剪切模量的计算得到bcc结构钨在压力低于600 GPa时的力学性能表现为韧性.最后,基于准简谐德拜模型,成功预测了钨的热膨胀系数、等压热容、等容热容和熵随着压强和温度的变化关系,为钨及其合金的进一步设计及应用提供参考.     

高压下钨弹性和热力学性质的第一性原理研究

本文利用密度泛函理论研究了高压下bcc结构钨的弹性和热力学性质,计算得到钨的晶格常数、体弹模量以及其对压强的一阶偏导与实验值符合较好;在常压下弹性常数计算值与实验值符合较好的基础上,预测了其高压数据.针对钨的固相结构稳定性问题,根据力学稳定判断标准得到0~600 GPa范围内bcc结构是力学稳定的.此外,通过体模量和剪切模量的计算得到bcc结构钨在压力低于600 GPa时的力学性能表现为韧性.最后,基于准简谐德拜模型,成功预测了钨的热膨胀系数、等压热容、等容热容和熵随着压强和温度的变化关系,为钨及其合金的进一步设计及应用提供参考.     

Electronic,elastic and dynamical properties of MgSe under pressure: rocksalt and iron silicide phase

The electronic, elastic and dynamical properties of MgSe in the rocksalt (B1) and iron silicide (B28) phase and the effects of pressure on these properties are investigated using first-principles method. The calculated electronic band structure indicates that the B1 phase of MgSe presents an indirect band-gap feature and the band gaps initially increase with pressure and subsequently decrease upon compression. Remarkably, an indirect-to-direct band-gap transition has been observed at the phase transition pressure. The elastic constants, bulk modulus, shear modulus, Young’s modulus, elastic anisotropy and B/G ratio of MgSe in the B1 and B28 phase at high pressure have also been investigated. The bulk modulus, shear modulus and Young’s modulus all increase monotonously with the increasing of pressure for the B1 and B28 phase of MgSe. The calculated phonon frequencies of the B1 phase at zero pressure agree well with available theoretical results. And the transverse acoustic phonon TA(X) mode of this phase completely softening to zero at 82 GPa. The phonon curves of the B28 phase under pressure have also been successfully investigated.     

Theoretical study of the structural phase transition and elastic properties of HfN under high pressures

The effect of hydrostatic pressure on the structures of HfN at 0 K was investigated by using the projector augmented wave (PAW) within the Perdew–Burke–Ernzerhof (PBE) form of the generalized gradient approximation (GGA). The transition pressure between NaCl (B1) and CsCl (B2) structures is predicted to be 277.3 GPa. This value is consistent with that reported by Kroll, while in contrast to the results obtained by Ojha et al. and Meenaatci et al. Moreover, the elastic properties of B1-HfN and B2-HfN under high pressures are successfully obtained. It is found that the elastic constants, bulk modulus B, shear modulus G, compressional and shear wave velocities increase monotonically with increasing pressure. The Debye temperature Θ calculated from the elastic constants of HfN is in good agreement with the experimental values. The anisotropies of B1-HfN and B2-HfN at zero pressure have also been discussed.     

First principle study on the elastic and thermodynamic properties of TiB2 crystal under high temperature

This paper predicts the elastic and thermodynamic characteristics of TiB2 crystal through the method of density functional theory within the generalized gradient approximation(GGA).The five independent elastic constants(Cij),the bulk modulus(B0),the dependence of bulk modulus(B0) on temperature T and pressure P and the coefficient of thermal expansion(αL) at various temperatures have been evaluated and discussed.According to calculation,the bulk modulus will increase with increasing pressure while decrease with the increasing temperature.The coefficient of thermal expansion is consistent with the famous Gruneisen’s law when the temperature is not too high.The obtained results agree well with the experimental and other theoretical results.     

Structural,elastic and mechanical properties of orthorhombic SrHfO3 under pressure from first-principles calculations

Structural, elastic and mechanical properties of orthorhombic SrHfO₃ under pressure have been investigated using the plane-wave ultrasoft pseudopotential technique based on the first-principles density functional theory. The calculated equilibrium lattice parameters and elastic constants of orthorhombic SrHfO₃ at zero pressure are in good agreement with the available experimental and calculational values. The lattice parameters, total enthalpy, elastic constants and mechanical stability of orthorhombic SrHfO₃ as a function of pressure were studied. With the increasing pressure, the lattice parameters and volume of orthorhombic SrHfO₃ decrease whereas the total enthalpy increases. Orthorhombic SrHfO₃ is mechanically stable with low pressure (<52.9 GPa) whereas that is mechanically instable with high pressure (>52.9 GPa). The bulk modulus, shear modulus, Young's modulus and mechanical anisotropy of orthorhombic SrHfO₃ as a function of pressure were analyzed. It is found that orthorhombic SrHfO₃ under pressure has larger bulk modulus, better ductility and less mechanical anisotropy than orthorhombic SrHfO₃ at 0 GPa.     

Ab initio studies of the structural,elastic, electronic and thermal properties of NiTi2 intermetallic

First principles calculations were performed in the framework of the density functional theory (DFT) using the Full Potential–Linear Augment Plane Wave method (FP–LAPW) within the generalized gradient approximation (GGA) to predict the structural, electronic, elastic and thermal properties of NiTi₂ intermetallic compound. By using the Wien2k all-electron code, calculations of the ground state and electronic properties such as lattice constants, bulk modulus, presure derivative of bulk modulus, total energies and density of states were also included. The elastic constants and mechanical properties such as Poisson’s ratio, Young’s modulus and shear modulus are estimated from the calculated elastic constants of the single crystal. Through the quasi-harmonic Debye model, the preasure and temperature dependences of the linear expansion coefficient, bulk modulus and heat capacity have been investigated. Finally, the Debye temperature has been estimated from the average sound velocity according to the predicted polycrystal bulk properties and from the single crystal elastic constants.     

Structural and elastic properties of LaTiO3 under pressure

We investigate the structural and elastic properties of LaTiO₃ by the plane-wave pseudopotential density functional theory method. The lattice constants, bulk modulus and its pressure derivative are obtained. These properties in the equilibrium phase are well consistent with the available experimental data. The pressure dependence of the elastic constants, ductility, mechanical stabilities, sound velocity and Debye temperatures are investigated for the first time. From the ratio G/B, we conclude that LaTiO₃ is ductile at 0 GPa and becomes more ductile at high pressure. In addition, the anisotropy factors for every symmetry plane and axis as well as linear bulk modulus at diverse pressures have been obtained.     

超导体MgB2弹性常数的第一原理计算

利用全势线性muffin-tin轨道(FP-LMTO)方法, 结合在密度泛函理论框架下的广义梯度近似, 研究了六角密堆积结构超导体MgB2的晶格参数, 弹性常数, 以及体积模量及其对压强的微分. 计算结果显示当晶格参数c和a的比率c/a大约为1.138时, MgB2的结构最稳定.本文所得到的计算结果与实验值及其他作者利用不同方法得到的计算值相符合.