一类电子俘获型红外可激发料光学性能研究

测试了硫化助熔剂法制务的电子俘获型红外可激发材料Ｅｕ，Ｓｍ：ＣａＳ和Ｃｅ，Ｓｍ：ＣａＳ的激发光谱、红外激励光谱、荧光谱及红外上转换发光光谱等，结果表明：这类不仅具有红外小转换及光学存储功能，而且具有光谱响应范围广，可在室浊罡工作以及造价低等优点，是一类很在发展前途的光学功能材料。     

发光搪瓷釉料研究

铕激活的铝酸锶系列超长余辉发粉具有起始亮度高、余辉时间长、无放射性毒害等突出优点,成为当前一类极具发展前途的发光材料,本项目采用该系列发光材料,研究了蓄能发光搪瓷釉料,并制备了性能稳定的发光搪瓷制品。     

热释光和光释光发光谱的测量

介绍了自行研制的计算机化热释光和光释光三维光谱测量装置的系统结构及其工作原理.在计算机的控制下,通过精密加热器或激发光源以热激发或光激发的方式使样品发光.从样品发出的光经过光路和光栅分光系统后,形成光谱,被高灵敏度的CCD采集,再将光谱图像模拟信号变为可以直接用计算机进行数据处理的数据信号.波长范围200~800nm,波长分辨率优于2nm,人机界面友好,操作方便.利用热释光和光释光三维光谱测量装置测量了SrSO₄:Eu(0.1%,摩尔分数)和CaSO₄:Eu(0.1%,摩尔分数)的光释光发光谱和热释光发光谱,得到SrSO₄:Eu的光释光发光波长与热释光发光波长均为375nm,而CaSO₄:Eu的光释光发光波长与热释光发光波长均为385nm,说明热释光和光释光具有相同的发光中心,均来自于Eu²⁺的能级跃迁.同时在CaSO₄:Eu的热释光发光谱中还观察到了Eu³⁺的发光.与二维发光曲线相比较,通过对三维热释光和光释光发光谱的研究,可以得到更丰富的信息,这有助于对热释光和光释光发光机制进行更深入的研究.     

铝酸锶铕镝磷光体及其发光特性研究

用燃烧法在６００℃合成了铝酸锶铕及铝锶铕镝磷光体并测定了其激光光谱、发射光谱及长余辉性质。结果表明,铝酸锶铕镝更适宜于制备长余辉材料,而铝思铕适宜于制作瞬时激发－－发光材料。     

一类电子俘获型红外可激发材料光学性能研究

测试了硫化助熔剂法制备的电子俘获型红外可激发材料Ｅｕ，Ｓｍ∶ＣａＳ和Ｃｅ，Ｓｍ∶ＣａＳ的激发光谱、红外激励光谱、荧光光谱及红外上转换发光光谱等，结果表明：这类材料不仅具有红外上转换及光存储功能，而且具有光谱响应范围广、可在室温下工作以及造价低等优点，是一类很有发展前途的光学功能材料。     

纳米发光材料LnVO4:Eu(Ln=La,Gd,Y)的光谱研究

采用络合溶胶 凝胶法制备了系列纳米发光材料LnVO4:Eu(Ln =La ,Gd ,Y) ,并采用X射线衍射(XRD)、红外光谱 (FTIR)、荧光光谱以及紫外 可见光谱 (UV Vis)对三种发光材料的结构以及发光性质进行研究。结果表明 :YVO4与GdVO4具有相同的结构 ,均属于四方晶系 ,二者具有相似的光谱性质 ;而LaVO4属于单斜晶系 ,受对称性的影响其光谱也相应的发生了变化 ,红外光谱和发射光谱的特征峰发生明显的宽化 ,紫外光谱峰的数目增多     

CaS∶Eu,Sm红外上转换薄膜光谱性能分析

为研究红外上转换材料CaS∶Eu,Sm的光谱性能,搭建了实验平台,对其荧光谱、红外激励发光谱(上转换发光谱)、红外激励谱、荧光余辉衰减曲线、红外激励发光衰减曲线进行了测试.实验结果表明:CaS∶Eu,Sm可被450~550nm的光激发,荧光激发波峰位于470nm,红外响应波段为800~1 600nm,红外激励波峰为1 200nm.     

稀土材料红外多光子量子剪裁现象

稀土红外量子剪裁为目前国内外的研究热点,它对于提高太阳能电池的效率从而减低太阳能发电的造价很有意义。论文综述了稀土红外量子剪裁的研究意义,在总结了太阳能电池发电和损耗的原理的基础上,分析了稀土红外量子剪裁提高太阳能电池效率的具体途径。同时综述了单掺Er3+材料的稀土红外量子剪裁发光现象：光激发2H_11/2能级有很强的4I_13/2→4I_15/2红外量子剪裁发光,速率很大的{2H_11/2→4I_9/2,4I_15/2→4I_13/2}交叉能量传递为导致光激发2H_11/2能级有高量子剪裁效率的主要原因。     

电子俘获型红外上转换屏

利用溶液悬浮分层提取技术获得粒度较为一致的电子俘获材料（ＥＴＭ）粉末，考虑ＥＴＭ屏空间分辨率、红外→可见发光亮度、ＥＴＭ化学稳定性和膜层均匀性等主要因素，采用不同方法制作了ＥＴＭ屏，较好地解决了ＥＴＭ膜层均匀性及器件封装后的化学稳定性等问题，并通过测试比较，提出了一种兼顾空间分辨率和红外上转换发光亮度的微镶嵌屏制作技术方案．     

存储型上转换发光材料CaS:Eu,Sm的发光机理研究

采用低温燃烧合成(LCS)法制备了存储型上转换发光材料CaS∶Eu,Sm,并对其上转换发光机理进行了研究。研究表明:样品的激发光谱位于200~600nm之间,紫外或可见光均可有效地激发该材料来完成充能过程,且可见光激发占优势;样品的红外响应光谱范围为800~1600nm,由辅助激活离子Sm所形成的劈裂的深陷阱能级是该材料具有宽频谱红外转换特性的根本原因;样品的热释光谱高温峰值位于351.02℃,计算得到的陷阱能级深度为0.82eV,深度适中,利于激发能的储存和上转换发光的产生。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.