Coupling laser radiation to a fabry-perot cavity with a single-mode optical fiber

Three aspects of coupling to Fabry-Perot cavities used in optical frequency standards are discussed: the use of a single-mode optical fiber to maintain coupling stability while improving vibration isolation of the cavity, the required stability of the coupling geometry, and the phase and polarization variations resulting from fiber movement. Optical fiber coupling should be useful when laser linewidths and stabilities at the Hertz level are desired.     

Transient dynamics of a single-mode semiconductor laser subjected to both optical feedback and external light injection

The transient dynamics of a single-mode semiconductor laser subjected to both weak optical feedback and light injection is studied. Even at detuning values for which injection locking is not effective, turn-on jitter and frequency jitter can still be strongly reduced by adjusting either the length of the external cavity or the detuning.     

Chaos generation in a semiconductor ring laser with an optical injection

Two chaos generation schemes are demonstrated numerically based on a semiconductor ring laser (SRL) with either a constant or a chaotic optical injection from an external distributed feedback (DFB) laser. Under a certain bias current, the chaotic output can be generated by the SRL with appropriate injection parameters. Parameter map is achieved numerically to show types of oscillation in the SRL. Bifurcation diagrams and Lyapunov exponent spectra roughly describe the routes to chaos for the SRL with disturbance. A bandwidth-enhanced chaos generation can be describes based on the chaotic optical injection scheme. The bandwidth of the bandwidth-enhanced chaos generated is about 12 GHz, which achieves approximately a two-fold increase compared with the constant injection scheme.     

Simple ABCD matrix method for evaluating optical coupling system of laser diode to single-mode fiber with a lensed-tip

In this paper, we present a simple technique to determine the coupling efficiency between a laser diode and a lensed-tip based on the ABCD transformation matrix method. We have compared our analysis technique to that of previous work and have found that the presented method is reliable in predicting the coupling efficiency of lensed-tip and has the advantage of simplicity of coupling efficiency calculation even by a pocket calculator. The results can be useful for designing coupling optics.     

The phenomenon of stochastic resonance in a single-mode laser system with an input periodical signal

Using the linear approximation method, we study a single-mode laser system driven by colored pump noise and quantum noise with coupling between the real and imaginary parts when the laser is operated well above threshold. The steady state mean intensity fluctuation C(0) and signal-to-noise ratio (SNR) are calculated. It is found that there is a maximum in SNR when there is a minimum in the fluctuation of laser system if the coupling coefficient between real and imaginary parts of the quantum noise equals zero.     

Interferometric monitoring of single-mode operation of a tunable injection laser

We propose a technique for rapid monitoring of single-mode operation of a tunable injection laser, based on analysis of the fine structure of the power-current characteristic obtained with self-heterodyning, using a Michelson interferometer. The technique makes it possible to determine the range for single-mode lasing and mode tuning as well as the presence of spurious optical feedback, and to estimate the coherence length. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 73, No. 1, pp. 119–123, January–February, 2006.     

Multipulse excitability in a semiconductor laser with optical injection

An optically injected semiconductor laser can produce excitable multipulses. Homoclinic bifurcation curves confine experimentally accessible regions in parameter space where the laser emits a certain number of pulses after being triggered from its steady state by a single perturbation. This phenomenon is organized by a generic codimension-two homoclinic bifurcation and should also be observable in other systems.     

Controllable photoinduced optical attenuation in a single-mode optical fiber by irradiation of a femtosecond pulse laser

Novel optical attenuation fibers were fabricated by the irradiation of a focused infrared femtosecond pulsed laser onto the core of a silica glass single-mode optical fiber. Optical attenuation at a wavelength of 1.55 microm proportionally increased with increasing numbers of irradiation points and was controllable under laser irradiation conditions. The single-mode property of the waveguide and the mode-field diameter of the optical fiber were maintained after irradiation of the femtosecond laser. It is suggested that the attenuation results from optical scattering at photoinduced spots formed inside the fiber core.     

Optimal distance from high power laser diode to cylindrical microlens in a coupling system

In a practical coupling system, a cylindrical microlens is used to collimate the emission of a high power laser diode (LD) in the dimension perpendicular to the junction plane. Using passive alignment, the LD is placed in the focus of the cylindrical microlens generally, regardless of the performance of the multimode optical fiber and the LD. In this paper, a more complete analysis is arrived at by ray-tracing technique, by which the angle 9 of the ray after refraction is computed as a function of the angle θo of the ray before refraction. The focus of the cylindrical microlens is not always the optimal position of the LD. In fact, in order to achieve a higher coupling efficiency, the optimal distance from the LD to the cylindrical microlens is dependent on not only the radius R and the index of refraction n of the cylindrical microlens, but also the divergence angle of the LD in the dimension perpendicular to the junction plane and the numerical aperture (NA) of the multimode optical fiber. The result     

Excitability in a quantum dot semiconductor laser with optical injection

We experimentally analyze the dynamics of a quantum dot semiconductor laser operating under optical injection. We observe the appearance of single- and double-pulse excitability at one boundary of the locking region. Theoretical considerations show that these pulses are related to a saddle-node bifurcation on a limit cycle as in the Adler equation. The double pulses are related to a period-doubling bifurcation and occur on the same homoclinic curve as the single pulses.     

Intensity-modulating characteristics of a laser diode subjected to optical injection

We have found that the optical power of a laser diode (LD) does not change with the injected light intensity that is modulated when its injection current is at some specific values. The amplitude of optical power change of the LD varies periodically with the increase of the injection current. It is made clear through theoretical analysis that these phenomena are caused by gain compression and interband carrier absorption of the LD that depend on longitudinal mode competition, bandgap-shrinkage effects, thermal conduction, and so on. Our experimental results make it easy to eliminate optical power change of LDs. We only need to choose a proper value of the injection current.     

Sweep optical frequency synthesizer with a distributed-Bragg-reflector laser injection locked by a single component of an optical frequency comb

A sweep optical frequency synthesizer is demonstrated by using a frequency-stabilized optical frequency comb and injection-locked distributed-Bragg-reflector (DBR) laser diode. The injection-locked DBR laser acts as a single-frequency filter and, simultaneously, a high-gain amplifier of the optical frequency comb. The frequency instability of the heterodyne beat signal between two independently injection-locked DBR lasers is measured to be 2.3 x 10(-16) at 1 s averaging time. The output frequency of the sweep optical frequency synthesizer can be precisely tuned over 1 GHz, and a saturated absorption spectrum of the Cs D2 line at 852 nm is recorded by the injected DBR laser.     

Semiconductor laser diode to single-mode fiber coupling using diffractive optical elements

An integrated mode converter consisting of two diffractive optical elements (DOEs) and a Silicon slab is presented for low-loss coupling between a semiconductor laser diode (LD) and a single-mode fiber (SMF). The phase structures of the DOEs are designed using iterative phase retrieval algorithm. We introduce a new far-field amplitude constraint into the iteration to provide very high mode conversion quality. Compared with previously published mode converters, the scheme is more universal because it’s applicable for any semiconductor LD. In simulation, coupling losses lower than 0.02 dB are predicted for all the discussed LDs with aspect ratios of the elliptical fields from 1 to 9. The requirements on axial displacement and rotation angle have been removed. The tolerance for 1-dB loss increment for lateral misalignment is 0.9 μm. And the coupling loss is insensitive to tilt angle.     

Stationary properties of a single-mode laser system with non-Gaussian and Gaussian noise

A single-mode laser system with non-Gaussian and Gaussian noise is investigated. The stationary mean value and the normalized variance of the laser intensity are numerically calculated under the condition that the stationary probability distribution function (SPDF) is derived. The SPDF as a function of the laser intensity exhibits a maximum. The maximum becomes smaller with the increase of the correlation intensity or the non-Gaussian parameter, where the later is a measure of the deviation from the Gaussian characteristic. The maximum becomes larger as the correlation time increases. The laser intensity stationary mean value decreases with the increase of the correlation intensity or the non-Gaussian parameter while increases with the correlation time increasing. The laser intensity normalized variance increases with the increase of the correlation intensity or the non-Gaussian parameter while decreases as the correlation time increases.     

外光注入半导体激光器实现时钟分频

从理论和实验上研究了利用光注入半导体激光器对高重复速率光脉冲产生的周期振荡和时钟分频现象.结果表明，光注入半导体激光器引起的二倍周期振荡是使注入脉冲重复频率分频的直接原因.通过耦合速率方程，数值模拟了半导体激光器在外光注入时输出光的时间序列和功率谱，并且分析了激光腔内各种周期振荡的特征.研究表明，当注入光使半导体激光器出现稳定的二倍周期振荡，且注入光的重复频率为此振荡频率的二倍时，时钟分频即可产生实验中，采用重复频率为6.32GHz的光脉冲注入Fabry-Perot激光器，实现了3.16GHz时钟分频信号 关键词： 周期振荡 时钟分频 光谱侧带 光注入     

Influence of injection patterns on chaos synchronization performance between a multimode laser diode and a single-mode laser

In this paper, based on a system composed of a multimode emitted laser diode and a single-mode received laser, chaos synchronization performance has been investigated numerically under different optical injection patterns. The results show that, for single mode injection (SMI) which means the received laser is injected by a selective longitudinal mode of the multimode emitted laser whose wavelength corresponds to that of the single-mode received laser, the system synchronization performance is better than that with multi mode injection (MMI); depending on the optical spectrum of the received laser, the physical mechanism of chaos synchronization deterioration for MMI is given. Additionally, after taking into account the parameter mismatches, the chaos synchronization performance of the system with different injection pattern have also been discussed. For either SMI or MMI, the synchronization performance with negative parameter mismatches is better than that with positive parameter mismatches.     

单模激光Lorenz系统反同步控制研究

提出了一种实现异结构混沌系统反同步控制的方法。根据Lyapunov 稳定性理论给出控制器的结构。以单模激光Lorenz系统和Rossler系统为例,验证了这种控制器的有效性。进一步研究了不确定混沌系统的反同步,并以不确定单模激光Lorenz系统和Rossler系统为例,实现了混沌反同步控制,同时系统中不确定参数得到识别。仿真模拟结果验证了这种方法的有效性。设计的反同步控制方法可用于任意混沌系统,具有一定的普适性。     

Locked localized states in a multimode semiconductor laser subject to optical injection

We study a multimode semiconductor laser subject to a multimode injection. Multimode output exhibits antiphase dynamics and coexisting attractors. When the output of the laser is only partially locked to the multimode optical injection, the multimode locking can be complete or localized.     

Influence of net gain on the statistical fluctuation in a single-mode laser system

Using linear approximation method, we calculate the intensity correlation time of a single-mode laser driven by both colored pump noise with signal modulation and the quantum noise with cross-correlation between its real and imaginary parts, and analyze the influence of the net gain coefficient a0 on the statistical fluctuation of the laser system. It is found that for the case that the colored pump noise is long time correlated, the main factor influencing the statistical fluctuation of the laser system is a0, and the frequency of the modulation signal has negligible effect on the statistical fluctuation of the laser system.