An improved tungsten-188/rhenium-188 gel generator based on zirconium tungstate

An improved¹⁸⁸W-¹⁸⁸Re gel generator based on Zr tungstate is described. The influence of synthesis parameters and pre-treatment conditions on¹⁸⁸Re elution yields and the¹⁸⁸W breakthrough was studied with 0.15M aqueous solution of NaCl at pH 5.3 to 7.3 as well as with some organic solvents. An elution efficiency of 80% was achieved during 3 month of explotation with 0.15M NaCl at pH=6.3. The¹⁸⁸W breakthrough was 10^–4 to 10^–3%. The¹⁸⁸W breakthrough may be decreased to 10^–6% when converted into tandem generator with an alumina column. However,¹⁸⁸Re yields are reduced by 8–12% with a tandem generator.     

The decay of188Re

The -ray spectra of¹⁸⁸Re decay have been studied by using two Ge/Li/ spectrometers and a three parameters /E-E-T/ List coincidence system. The energies and relative intensities of 52 -rays and cascade relations of 14 -rays are determined. Ten new -rays: 155 /633–478/, 984, 1096, 1463, 1332, 1530, 1574, 1810, 1867, and 1937 keV have been identified. The 155 /633–478/ transition is confirmed and its relative intensity is estimated by means of coincidence experiment. 24 levels of¹⁸⁸Re are assigned. Among those, 6 levels are first put into the decay scheme of¹⁸⁸Re. In addition to 1443 keV and 1937 keV levels, 1685, 1729 and 1965 keV levels are also observed in the decay of¹⁸⁸Ir and other reaction studies. The 1948 level is recently suggested in the¹⁹⁰Os/p, t/¹⁸⁸Os reaction. The 486 keV and 811 keV -transitions are also put into the level scheme of¹⁸⁸Re. The ^– decay branching ratio is deduced.     

The tungsten-188/rhenium-188 generator: Effective coordination of tungsten-188 production between the HFIR and BR2 reactors

The rapidly increasing therapeutic applications of ¹⁸⁸Re in nuclear medicine, oncology and interventional cardiology require routine production of large, multi-Curie levels of the ¹⁸⁸W parent. The capability and effective coordination of back-up production sites is important to insure that high level ¹⁸⁸W/¹⁸⁸Re generators are continually available. We have coordinated ¹⁸⁸W production at the High Flux Isotope Reactor (HFIR - Oak Ridge, US) with production at the BR2 Reactor (Mol, Belgium) characterized by peak thermal neutron fluxes of 2.51·0¹⁵ (HFIR) and 1·10¹⁵ (BR2) neutrons/cm²·sec, respectively. The long 69-day physical half-life permits receipt of ¹⁸⁸W from BR2 within 0.25 T _1/2's, even after the 12-day post irradiation cooling required for ¹⁸⁷W decay (T _1/2 = 24 hours). Since ¹⁸⁸W production by double neutron capture of enriched ¹⁸⁶W is a function of the square of the thermal neutron flux, HFIR production (4-5 Ci ¹⁸⁸W/g ¹⁸⁶W/cycle) is higher than at the BR2 (1.0-1.1 Ci/g ¹⁸⁶W/cycle). However, the specific activity (SA) of BR2-produced ¹⁸⁸W is still about 0.8-0.9 Ci/g after processing at ORNL following shipment from Belgium. This SA is sufficiently high to permit fabrication of 1 Ci generators suitable for clinical use, since simple post elution concentration of the saline bolus (30-50 ml) obtained from the generator can provide samples with high specific volume (1 ml volume). The time periods from reactor push in Mol and completion of processing, fabrication and shipment of generators from Oak Ridge have been 19-21 days. Six campaigns have been successfully completed since 1998, with processed levels of ¹⁸⁸W in Oak Ridge from 8-26 Curies/campaign. ¹⁸⁸W has been provided to MAP Medical technologies Oy (Tikkakoski, Finland) for fabrication and distribution of generators for use at IAEA-supported research projects in developing countries. We have thus established and demonstrated an effective collaboration between the Studiecentrum voor Kernenergie-Centre d'Etude de l'Energie Nucléaire (SCK·CEN) and ORNL for back-up production of ¹⁸⁸W. This collaboration continues to be especially helpful during periods when interruption of HFIR operation is necessary for maintenance and upgrades.     

Cation-exchange separation and colorimetric determination of some elements in trace analysis of platinum-rhodium (10%) alloys

Summary A method of separation and colorimetric determination of trace amounts (10^–4–10^–5%) of Cu, Al, Fe, Bi, Pb, Mn, Cd, Zn, Co, and M in platinum-rhodium (10%) alloys has been developed. The elements to be determined are retained on a column containing the strongly acidic cation-exchanger Amberlite IR-120, from dilute hydrochloric acid medium (p_H 1–1.5), while platinum and rhodium pass through in the form of anionic chloride complexes. The individual metals are eluted and concentrated and then separated by extraction and carrier precipitation. The metals are determined by means of sensitive colorimetrie methods with dithizone (Cu, Bi, Pb, Cd, Zn), eriochromecyanine R (Al), 2-nitroso-1-naphthol (Co),-furildioxime (Ni), 1-(2-pyridylazo)-2-naphthol (Mn), and thiocyanate (Fe). The error of the determination does not exceed 15%.

---

Zusammenfassung Eine Trennungs- und Bestimmungsmethode für Spuren (10^–4 bis 10^–5%) von Cu, Al, Fe, Bi, Pb, Mn, Cd, Zn, Co und Ni in PIatm-Rhodium-(10%)-Legierungen wurde ausgearbeitet.Die angeführten Elemente werden mit Amberlit IR-120 aus der verd. salzsauren Lösung (p_H 1 bis 1,5) von Platin und Rhodium getrennt, die als Anionchloridkomplexe im Eluat bleiben. Die einzelnen Metalle werden nach Elution aus ihrer Lösung durch Extraktion bzw. Mitfällung getrennt und kolorimetrisch mit Dithizon (Cu, Bi, Pb, Cd, Zn), Eriochromcyanin R (Al), 2-Nitroso-1-naphthol (Co),-Furildioxim (Ni), 1-(2-Pyridylazo)-2-naphthol (Mn) und Rhodanid (Fo) bestimmt. Der Fehler beträgt weniger als 15%,

     

Studies of gel metal-oxide composite samples as filling materials for W-188/Re-188 generator column

Studies of zirconium tungstate gels for production of ¹⁸⁸W/¹⁸⁸Re generators using tungsten of natural isotopic abundance irradiated in a moderate flux nuclear reactor have been carried out. Composites of WO₃–ZrO₂ have been synthesized by Complex Sol–Gel Process developed in INCT and other techniques. Different proportions of metal oxides and temperature were applied. Elution profiles of columns filled with gel samples irradiated in nuclear reactor have been studied using as an eluent 0.9% NaCl solution. Purity of ¹⁸⁸Re fraction and efficiency of elution were determined. Ageing effect on elution efficiency was also examined. It was found that the best elution performance showed zirconium tungstate gel prepared in 110 °C or 500 °C in which molar ratio of metal oxides was 1:2.     

186Re/188Re labeled polypeptide microspheres as a potential radiation synovectomy agent

Polypeptide microspheres containing polycysteine crosslinked with polylysine were prepared and radiolabeled with¹⁸⁶Re and¹⁸⁸Re. High labeling yields with the microspheres with both¹⁸⁶Re and¹⁸⁸Re (97%) were obtained, and above 99% retention of radiolabels in water in 24 hours was obtained. Rhenum-186 labeled polycysteine and polylysine microspheres (11 ratio, 20 m as mean diameter) were injected intra-articularly into the rear stifes (knee joints) of normal New Zealand white rabbits. About 87% of injected dose was retained in rabbit stifles and adjacent tissues in 96 hours after injection, while most of the activity lost from the joints was excreted in the urine. Due to its simplicity of preparation and radiolabeling, versatility, and biodegradability, this type of conjugate system may become the therapeutics of choice for radiation synovectomy.     

Determination of Cd, Co, Cr, Cu, Fe, Mn, Ni and Pb in natural waters, alkali and alkaline earth salts by electrothermal atomic absorption spectrometry after preconcentration by column solid phase extraction

Methods are described for the determination of trace and ultra trace amounts of Cd, Co, Cr, Cu, Fe, Mn, Ni and Pb in natural waters, alkali and alkaline earth salts. Separation and preconcentration of trace metals is achieved by a column solid phase extraction procedure using silica gel modified with derivatives of dithiocarbamates — Na-DDTC (sodium diethyldithio-carbamate and HMDTC (ammonium hexamethylene-dithiocarbamate) as column packing material. The influence of the sorbent preparation procedure on the degree of sorption of the trace analytes is examined for different pH values of the sample solution. Isobutylmethyl ketone (IBMK) is proposed as an effective eluent for quantitative elution of retained metal ions. Optimal instrumental parameters for ETAAS determination of preconcentrated elements in organic eluate are presented. Practical application of sorbents in analysis of natural waters and alkali and alkaline earth salts is demonstrated. Proposed preconcentration procedure combined with ETAAS determination of trace analytes allows the determination of 0.04 g l^–1 Cd, 0.1 g l^–1 Cr, Cu, and Mn and 0.3 g l^–1 Co, Fe, Ni and Pb in natural waters and 1.10^–7% Cd, 3.10^–7% Cr and Mn, 7.10^–7% Co, Ni and Pb and 2.10^–6% Cu and Fe in alkali and alkaline earth salts.     

Production of carrier-free 188Re in the past ten years in Taiwan

Twenty clinical scale alumina-based ¹⁸⁸W/¹⁸⁸Re generators and carrier-free ¹⁸⁸Re has been produced at the Institute of Nuclear Energy Research (INER-Taiwan) for over ten years. 2845.6 GBq (76.9 Ci) of ¹⁸⁸Re-perrhenate solution has been eluted from generators during the past ten years. We have used the harvesting ¹⁸⁸Re solution for labeling radiopharmaceuticals, such as ¹⁸⁸Re-HEDP, ¹⁸⁸Re-MDP, ¹⁸⁸Re-microsphere, ¹⁸⁸Re-lipiodol, and ¹⁸⁸Re-sulfur colloid, etc. The average eluting yield of ¹⁸⁸Re is 78.6±5.8% that was investigated at 1115 harvesting times from 20 generators. Each generator can be used more than six months but the Millipore needs to be changed every two months for smooth harvesting and high yield of ¹⁸⁸Re solution.     

Flow Analysis of Transition Metals by Thermal Lensing

The conditions for the flow determination of Al(III), Bi(III), Cd(II), Co(II), Cr(III), Cu(II), Fe(III), Mn(II), Nd(III), Ni(II), Pb(II), Pr(III), and Zn(II) by reaction with Xylenol Orange in aqueous solutions at pH 4.5 and the determination of Cd(II), Co(II), Cu(II), Fe(II), Ni(II), Pb(II), and Zn(II) by reaction with 4-(2-thiazolylazo)resorcinol in water–ethanol mixtures (5 : 1) at pH 5.0 using an injected sample volume of 80 L were proposed. The limits of detection were n × 10^–8–n × 10^–7 mol/L; the linearity ranges in the calibration graphs were of about three orders of magnitude; the relative standard deviation was of 3–7%.     

A novel magnetic metal organic framework nanocomposite for extraction and preconcentration of heavy metal ions, and its optimization via experimental design methodology

We describe a novel magnetic metal-organic framework (MOF) prepared from dithizone-modified Fe₃O₄ nanoparticles and a copper-(benzene-1,3,5-tricarboxylate) MOF and its use in the preconcentration of Cd(II), Pb(II), Ni(II), and Zn(II) ions. The parameters affecting preconcentration were optimized by a Box-Behnken design through response surface methodology. Three variables (extraction time, amount of the magnetic sorbent, and pH value) were selected as the main factors affecting adsorption, while four variables (type, volume and concentration of the eluent; desorption time) were selected for desorption in the optimization study. Following preconcentration and elution, the ions were quantified by FAAS. The limits of detection are 0.12, 0.39, 0.98, and 1.2 ng mL^?1 for Cd(II), Zn(II), Ni(II), and Pb(II) ions, respectively. The relative standard deviations were <4.5 % for five separate batch determinations of 50 ng mL^?1 of Cd(II), Zn(II), Ni(II), and Pb(II) ions. The adsorption capacities (in mg g^?1) of this new MOF are 188 for Cd(II), 104 for Pb(II), 98 Ni(II), and 206 for Zn(II). The magnetic MOF nanocomposite has a higher capacity than the Fe₃O₄/dithizone conjugate. This magnetic MOF nanocomposite was successfully applied to the rapid extraction of trace quantities of heavy metal ions in fish, sediment, soil, and water samples.

Reactor production and processing of therapeutic radioisotopes for applications in nuclear medicine

In this paper the reactor production of a variety of therapeutic radionuclides of current clinical interest are discussed. Examples include radioisotopes produced by single neutron capture and those which are available from –/decay of reactor-produced parent radioisotopes. Two examples of generator parents produced by double neutron capture of targets are also discussed. One key example in this category is¹⁸⁸W, produced from irradiation of enriched¹⁸⁶W. The production of¹⁸⁸W in the ORNL High Flux Isotope Reactor and the fabrication and performance of the first production level large-scale clinical prototype¹⁸⁸W/¹⁸⁸Re generators are also described.     

Determination of Trace Elements in Arsenic and Antimony Minerals by Atomic Absorption Spectrometry and k0-Instrumental Neutron Activation Analysis After Removal of As and Sb

The content of trace elements in arsenic and antimony minerals from the Allchar mine, Macedonia, was determined by electrothermal atomic absorption spectrometry (ETAAS) and k₀-instrumental neutron activation analysis (k₀-INAA) after removal of arsenic and antimony. Their direct determination by ETAAS or k₀-INAA in arsenic (realgar and orpiment) and antimony (stibnite) minerals is limited by strong matrix interferences from As and Sb. Successful elimination of both elements was realized by the extraction of their iodide complexes into toluene. It was found that the optimal conditions were triple extraction of arsenic into toluene from 6mol·L^–1 HCl with addition of KI. Triple extraction of antimony was most successful in the system 4.5mol·L^–1 H₂SO₄ and KI into toluene. In both cases, trace elements (Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn) were then detected in the aqueous phase by ETAAS. The proposed procedures with ETAAS were checked by the method of standard additions and Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn determined in realgar, orpiment and stibnite. Using k₀-INAA the trace elements Ba, Ce, Co, Cr, Cs, Fe, Hg, Sc, Tb, Th, U and Zn in realgar and orpiment were determined before and after As and Sb removal from the same aliquot of sample. The removal of both elements with KI into toluene was higher than 99.8% and no losses of trace elements were observed.     

Separation of Clinical Grade 188Re from 188W Using Polymer Embedded Nanocrystalline Titania

Currently, ¹⁸⁸Re is obtained from ¹⁸⁸W/¹⁸⁸Re chromatographic generator containing alumina which has a limited capacity (~80 mg Wg^?1) for ¹⁸⁸W. This results in high bolus volumes of ¹⁸⁸Re, which often needs to be concentrated before radiolabeling. We have demonstrated the feasibility of using polymer embedded nano crystalline titania (TiP), a novel high capacity sorbent material (~300 mg Wg^?1), for developing a ¹⁸⁸W/¹⁸⁸Re chromatographic generator. A TiP based chromatographic ¹⁸⁸W/¹⁸⁸Re generator was developed in which ¹⁸⁸Re could be eluted with 0.9% saline solution. About 90% of the ¹⁸⁸Re could be recovered in the first 4–5 mL of total activity with more than 80% yield. The purity of ¹⁸⁸Re is adequate for clinical applications.     

Separation of Clinical Grade 188Re from 188W Using Polymer Embedded Nanocrystalline Titania

Currently, ¹⁸⁸Re is obtained from ¹⁸⁸W/¹⁸⁸Re chromatographic generator containing alumina which has a limited capacity (~80 mg Wg⁻¹) for ¹⁸⁸W. This results in high bolus volumes of ¹⁸⁸Re, which often needs to be concentrated before radiolabeling. We have demonstrated the feasibility of using polymer embedded nano crystalline titania (TiP), a novel high capacity sorbent material (~300 mg Wg⁻¹), for developing a ¹⁸⁸W/¹⁸⁸Re chromatographic generator. A TiP based chromatographic ¹⁸⁸W/¹⁸⁸Re generator was developed in which ¹⁸⁸Re could be eluted with 0.9% saline solution. About 90% of the ¹⁸⁸Re could be recovered in the first 4–5 mL of total activity with more than 80% yield. The purity of ¹⁸⁸Re is adequate for clinical applications.

     

Application of a method for matrix correction using compton-scattering for the quantitative determination of metals in silica by wavelength dispersive X-ray fluorescence spectroscopy (WDXRF)

Summary A correction method to diminish errors caused by different mass absorption coefficients of the samples is described. Also errors caused by differing device parameters are diminished. The method is used for the determination of Fe, Cr, Ni, Co, Mn, Zn, Cd, Cu, Hg and Pb on chemically modified silica in the g/g-range.

---

Anwendung einer Methode zur Matrixkorrektur durch Compton-Streupeaks für die quantitative Bestimmung von Metallen in Kieselgelen mit Hilfe der wellenlängendispersiven Röntgenfluorescenzanalyse (WDXRF)

Zusammenfassung Ein Korrekturverfahren zur Verminderung von Meßfehlern, die durch unterschiedliche Massenabsorptionskoeffizienten der Proben verursacht werden, wird beschrieben. Ebenso werden Fehler durch Schwankungen von Geräteparametern verringert. Die Methode wird benutzt zur Bestimmung von Fe, Cr, Ni, Cd, Co, Mn, Zn, Cu, Hg und Pb auf chemisch modifizierten Kieselgelen im g/g-Bereich.

     

Rapid multi-element analysis of groundwater by high-resolution inductively coupled plasma mass spectrometry

A rapid and sensitive method was developed to determine, with a single dilution, the concentration of 33 major and trace elements (Na, Mg, Si, K, Ca, Li, Al, P, S, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Sr, Mo, Cd, In, Sn, Sb, Cs, Ba, Re, Hg, Pb, Bi, U) in groundwater. The method relies on high-resolution inductively coupled plasma mass spectrometry (HR ICP-MS) and works across nine orders of magnitude of concentrations. For most elements, detection limits for this method are considerably lower than methods based on quadrupole ICP-MS. Precision was within or close to ±3% (1) for all elements analyzed, with the exception of Se (±10%) and Al (±6%). The usefulness of the method is demonstrated with a set of 629 groundwater samples collected from tube wells in Bangladesh (Northeast Araiharzar). The results show that a majority of tube well samples in this area exceed the WHO guideline for As of 10 g L^–1, and that those As-safe wells frequently do not meet the guideline for Mn of 500 µg L^–1 and U of 2 µg L^–1.     

4-{[(2-Hydroxyphenyl)imino]methyl}-1,2-benzenediol (HIMB) anchored Amberlite XAD-16: Preparation and applications as metal extractants

Amberlite XAD-16 was loaded with 4-{[(2-hydroxyphenyl)imino]methyl}-1,2-benzenediol (HIMB) via azo linker and the resulting resin AXAD-16-HIMB explored for enrichment of Zn(II), Mn(II), Ni(II), Pb(II), Cd(II), Cu(II), Fe(III) and Co(II) in the pH range 5.0-8.0. The sorption capacity was found between 56 and 415 μmol g⁻¹ and the preconcentration factors from 150 to 300. Tolerance limits for foreign species are reported. The kinetics of sorption is not slow, as t_1/2 is ≤15 min. The chelating resin can be reused for seventy cycles of sorption-desorption without any significant change (<2.0%) in the sorption capacity. The limit of detection values (blank + 3 s) are 1.72, 1.30, 2.56, 2.10, 0.44, 2.93, 2.45 and 3.23 μg l⁻¹ for Zn, Mn, Ni, Pb, Cd, Cu, Fe and Co, respectively. The enrichment on AXAD-16-HIMB coupled with flame atomic absorption spectrometry (FAAS) monitoring is used to determine the metal ion ions in river and synthetic water samples, Co in vitamin tablets and Zn in powdered milk samples.     

Energiedispersive R?ntgenfluorescenzanalyse von Schwermetallspuren (Mn, Fe, Co, Ni, Cu, Zn, Ta, Pb, U) in Mineralw?ssern nach Abtrennung am Celluloseaustauscher Hyphan

Zusammenfassung Spurenelemente in Mineralwässern werden auf kleinen Trennsäulen mit dem Celluloseaustauscher Hyphan abgetrennt, mit verdünnter Salzsäure eluiert, durch Schütteln an 100 mg Hyphan fixiert und durch energiedispersive Röntgenfluorescenzanalyse bestimmt. Folgende Schwermetalle werden quantitativ erfaßt, sofern sie in Konzentrationen 1 ppb im Wasser vorhanden sind: Mn, Fe, Co, Ni, Cu, Zn, Ta, Pb und U. Neben verschiedenen handelsüblichen Mineralwässern werden eine Natriumchloridsole und Meerwasser auf ihren Spurenelementgehalt untersucht. Die Ergebnisse der Röntgenfluorescenzanalyse und der Atomabsorption stimmen im Rahmen der Fehlergrenzen überein.

---

Energy-dispersive X-ray fluorescence analysis of traces of heavy metals (Mn, Fe, Co, Ni, Cu, Zn, Ta, Pb, U) in mineral waters after separation on the cellulose-exchanger hyphan

Summary Trace elements in mineral water are separated in small columns on the cellulose-exchanger Hyphan, eluted by diluted hydrochloric acid, bound on 100 mg of Hyphan by shaking and determined by energy-dispersive X-ray fluorescence. The following heavy metals can be analysed quantitatively if present in water in concentrations 1 ppb: Mn, Fe, Co, Ni, Cu, Zn, Ta, Pb and U. Several commercial mineral waters, a sodium chloride spring and seawater were analyzed for trace elements. The results obtained by X-ray fluorescence and by atomic absorption agree within the limits of error.

     

AAS determination of Co, Ni, Mn and Cr in ores, concentrates and dusts from copper metallurgy after matrix elements separation by extraction

Summary A method has been developed for the AAS determination of Co, Ni, Mn and Cr in ores, concentrates and dusts of copper metallurgy at the 10^–3–10^–1% level. The matrix elements (Cu, Pb, Zn, Fe) were separated in a two-stage extraction: with MIBK from 6 M HCl solution and with 0.1 M tetrahexylammonium iodide (THAI) in MIBK from 3 M HCl, in form of ion-pairs, without Co, Ni, Mn and Cr losses. Values of r.s.d. were 2.0–6.0%.

---

AAS-Bestimmung von Co, Ni, Mn und Cr in Erzen, Konzentraten und Stäuben aus dem Bereich der Kupfermetallurgie nach Abtrennung der Matrixelemente durch Extraction

Zusammenfassung Das beschriebene Verfahren eignet sich für den Bereich von 10^–3 bis 10^–1%. Die Matrixelemente (Cu, Pb, Zn, Fe) wurden als Ionenpaare ohne Verluste an Co, Ni, Mn und Cr mit Hilfe einer zweistufigen Extraktion abgetrennt: mit MIBK aus 6 M HCl-Lösung und mit 0,1 M Tetrahexylammoniumiodid (THAI) in MIBK aus 3 M HCl-Lösung. Die relativen Stadardabweichungen lagen im Bereich von 2,0 bis 6,0%.

     

Potentiometric studies on the complexes of tetracycline (TC) and oxytetracyclin (OTC) with some metal ions

Summary The interaction of Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Zn(II), Cd(II), Hg(II), Pb(II), Al(III), and UO₂(II) ions with tetracycline (TC) were studied by potentiometricpH titrations. The formation constants of the different binary complexes formed in such systems have been determined at 25±0.1°C and =0.1 moll^–1 (NaNO₃). PotentiometricpH equilibrium measurements have been made under the same conditions for the interaction of oxytetracycline (OTC) and Cu(II), Cd(II), Pb(II), and UO₂(II). The formation of (1:1) binary complexes are inferred from the potentiometricpH tritration curves. The protonation constants ofTC andOTC were also determined under the same conditions and refined (ESAB2M computer program). The transition metal stability constants are consistent with the Irving-Williams series.

---

Potentiometrische Untersuchungen der Komplexe von Tetracyclin (TC) and Oxytetracyclin (OTC) mit einigen Metall-Ionen

Zusammenfassung Die Wechselwirkungen von Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Zn(II), Cd(II), Hg(II), Pb(II), Al(III) und UO₂(II) Ionen mit Tetracyclin (TC) wurden mittels potentiometrischerpH-Titrationen untersucht. Die Komplexbildungskonstanten wurden bei 25±0.1°C und =0.1 mol/1(NaNO₃) bestimmt. Unter den gleichen Bedingungen wurden die Komplexierung von Cu(II), Cd(II), Pb(II) und UO₂(II) mit Oxytetracyclin (OTC) mittel potentiometrischerpH Gleichgewichtsmessungen untersucht. Aus den potentiometrischenpH-Titrationskurven ergab sich die Bildung von (1:1) binären Komplexen. Die Protonierungskonstanten vonTC undOTC wurden ebenfalls bestimmt und rechnerisch verfeinert (ESAB2M Computer Programm). Die Stabilitätskonstanten für die Übergangsmetalle stimmen mit der Irving-Williams Reihe überein.