Microscopic observation and in-situ Raman scattering studies on high-pressure phase transformations of Kr hydrate

Direct observations through a microscope and in-situ Raman scattering measurements of synthesized single-crystalline Kr hydrate have been performed at pressures up to 5.2 GPa and 296 K. We have observed that the initial cubic structure II (sII) of Kr hydrate successively transforms to a cubic structure I (sI), a hexagonal structure, and an orthorhombic structure (sO) called "filled ice" at 0.45, 0.75, and 1.8 GPa, respectively. The sO phase exists at least up to 5.2 GPa. In addition to these transformations, we have also found the new phase behavior at 1.0 GPa, which is most likely caused by the change of cage occupancy of host water cages by guest Kr atoms without structural change. Raman scattering measurements for observed phases have shown that the lattice vibrational peak at around 130 cm(-1) disappears in the pressure region of sI, which enables us to distinguish the sI phase from sII and sH phases.     

Evaluation of sugar sorption isotherm measurement by frontal analysis under industrial processing conditions

This paper evaluates frontal analysis for routine sugar isotherm measurements at industrial conditions, that is concentrations up to 400 kg/m3 and a temperature of 60 degrees C. Sugar isotherms for a gel type cation-exchange resin loaded with metal ions were measured in a HPLC setup equipped with a UV detector. It is shown experimentally that isotherms obtained with large concentration steps (step series method) underestimated the isotherm. The underestimation is larger for larger resin particle size. In contrast, isotherms obtained with small concentration steps (staircase method) yielded correct isotherms. The seldom-mentioned change of the sorbent volume during the course of an isotherm measurement is discussed. It is shown that shrinking of 4% cross-linked resin at high sugar concentration has a negligible effect on the isotherm. Furthermore, the isotherms obtained with staircase frontal analysis agreed very well with those obtained with the independent, though more laborious and time-consuming, adsorption-desorption method. Staircase frontal analysis is shown to be convenient and accurate and is therefore recommended for isotherm measurements covering large concentration ranges.     

Pressure-area isotherm of a lipid monolayer from molecular dynamics simulations

We calculated the pressure-area isotherm of a dipalmitoyl-phosphatidylcholine (DPPC) lipid monolayer from molecular dynamics simulations using a coarse-grained molecular model. We characterized the monolayer structure, geometry, and phases directly from the simulations and compared the calculated isotherm to experiments. The calculated isotherm shows liquid-expanded and liquid-condensed phases and their coexistence plateau. At high pressure, the monolayer surface is rippled; upon further compression, the monolayer undergoes a collapse. We studied the effect of temperature and system size on the isotherm slope and phase coexistence region. Thermodynamic and dynamic properties of the monolayer phases were also investigated.     

Adsorption from binary solvent mixtures onto silica gel by HPLC frontal analysis

Summary The chromatographic technique of frontal analysis is applied to measuring adsorption from binary liquid mixtures by silica gel. The complete adsorption isotherm of a solvent mixture is obtained by measuring the break-through curves for a series of small concentration steps of the mobile phase. This method offers a direct way to determine the composition of the stationary phase in liquid-solid chromatography with mixed mobile phases. The surface excess isotherms of all binary systems formed by benzene, cyclohexane, and 1,2-dichloroethane, at the solution-silica gel interface at 25 °C are presented. The data of the three systems are shown to be thermodynamically mutually consistent.     

Adsorption dynamics of gases and vapors on the nanoporous metal organic framework material Ni2(4,4'-bipyridine)3(NO3)4: guest modification of host sorption behavior

This study combines measurements of the thermodynamics and kinetics of guest sorption with powder X-ray diffraction measurements of the nanoporous metal organic framework adsorbent (host) at different adsorptive (guest) loadings. The adsorption characteristics of nitrogen, argon, carbon dioxide, nitrous oxide and ethanol and methanol vapors on Ni2(4,4'-bipyridine)3(NO3)4 were studied over a range of temperatures as a function of pressure. Isotherm steps were observed for both carbon dioxide and nitrous oxide adsorption at approximately 10-20% of the total pore volume and at approximately 70% of total pore volume for methanol adsorption. The adsorption kinetics obey a linear driving force (LDF) mass transfer model for adsorption at low surface coverage. At high surface coverage, both methanol and ethanol adsorption follow a combined barrier resistance/diffusion model. The rates of adsorption in the region of both the carbon dioxide and methanol isotherm steps were significantly slower than those observed either before or after the step. X-ray diffraction studies at various methanol loadings showed that the host structure disordered initially but underwent a structural change in the region of the isotherm step. These isotherm steps are ascribed to discrete structural changes in the host adsorbent that are induced by adsorption on different sites. Isotherm steps were not observed for ethanol adsorption, which followed a Langmuir isotherm. Previous X-ray crystallography studies have shown that all the sites are equivalent for ethanol adsorption on Ni2(4,4'-bipyridine)3(NO3)4, with the host structure undergoing a scissoring motion and the space group remaining unchanged during adsorption. The activation energies and preexponential factors for methanol and ethanol adsorption were calculated for each pressure increment at which the linear driving force model was obeyed. There was a good correlation between activation energy and ln(preexponential factor), indicating a compensation effect. The results are discussed in terms of reversible adsorbate/adsorbent (guest/host) structural changes and interactions and the adsorption mechanism. The paper contains the first evidence of specific interactions between guests and functional groups leading to structural change in flexible porous coordination polymer frameworks.     

Phase transition in an adsorption layer of a soluble surfactant at the air-water interface

In this paper we provide experimental evidence for a phase transition between a liquid- and gas-like phase occurring in an adsorption layer of a soluble surfactant at the air-water interface. The equilibrium surface tension sigma(e) versus bulk concentration sigma(e) (c) isotherm of surface chemically pure sodium 2-[4-(4-trifluoromethyl-phenylazo) phenoxy]-ethane sulfonate was measured at a temperature of 295 K up to the solubility limit of the amphiphile. The sigma(e) (c) isotherm could be fitted by Frumkin's equation of state. The lateral interaction energy is just above the limit for which Frumkin's model predicts a phase transition. The corresponding surface pressure pi versus surface area A isotherm possesses striking similarities to first-order phase transitions in the Langmuir monolayer. The fact that the difference in the two-dimensional density is only a factor of 2 indicates that the system is very close to the critical point. The surface phases were further characterized by surface second harmonic generation. The major structural difference between the two surface phases is the amphiphile's molecular orientation. A mean orientation of the amphiphile of about 80 degrees was found in the gas analogous phase, whereas a molecular tilt of 38 degrees has been identified in the liquid-like phase.     

Simulating the thermal behavior and fragmentation mechanisms of exohedral and substitutional silicon-doped C60

Structures, thermal behavior, and fragmentation mechanisms of exohedral and substitutional silicon-doped C(60) containing 1-12 Si atoms are investigated by extensive molecular-dynamics simulations. A nonorthogonal tight-binding model is used to mimic the interatomic interactions in the doped fullerenes. Beginning from the minimum-energy structures, the temperature of the doped fullerenes is slowly increased until fragmentation takes place. A correlation can be established between the exohedral and substitutional structures and the corresponding fragmentation mechanisms and fragmentation temperatures. Exohedral C(60)Si(m) fullerenes fragment into two homonuclear pieces, the Si(m) cluster and the C(60) fullerene that remains intact. In contrast, the substitutional C(60-m)Si(m) heterofullerenes undergo structural transformations, including the partial unraveling of the cage, prior to fragmentation. Then, ejection of atoms or small molecules takes place from the distorted structures. The slow heating rate used, combined with long simulation runs, allows us to determine the fragmentation temperature of exohedral and substitutional Si-doped fullerenes as a function of the number of silicon atoms. Substitutional Si-doped fullerenes exhibit much higher fragmentation temperatures (1000-1500 K higher) than the exohedral fullerenes. This can be understood from the different bonding of the Si atoms in both structures.     

X@(HAINH)_(12)和X(HAINH)_(12)(X=F~-,Cl~-,Br~-,O~(2-),S~(2-),Se~(2-))复合物的结构和稳定性

用DFT的B3LYP方法在6-31G(d)基组的水平上,对闭式多面体簇合物(HA1NH)12及其内含式X@(HA1NH)12外接式X(HA1NH)12(X=F-,Cl-,Br-,O2-,S2-,Se2-)复合物的结构进行了构型优化和能量计算,并讨论了几何构型、自然键轨道(NBO)、振动频率、能量参数及NMR数据与结构的关系,最后得到复合物结构的稳定性信息,具有Th对称性的X@(HA1NH)12(X=F-,Cl-,Br-,S2-,Se2-)复合物和具有C3对称性的O2-@(HA1NH)12复合物为内含式的基态结构,从能量角度分析,内含式复合物比外接式复合物的结构稳定.     

Adsorption of organic compounds onto activated carbons from recycled vegetables biomass

The removal of organic species from aqueous solution by activated carbons is investigated. The latter ones are prepared from olive husks and almond shells. A wide range of surface area values are obtained varying temperature and duration of both carbonization and activation steps. The adsorption isotherm of phenol, catechol and 2,6-dichlorophenol involving the activated carbons prepared are obtained at 25 degrees C. The corresponding behavior is quantitatively correlated using classical isotherm, whose parameters are estimated by fitting the equilibrium data. A two component isotherm (phenol/2,6-dichlorophenol) is determined in order to test activated carbon behavior during competitive adsorption.     

Structural, electronic, and magnetic properties of manganese-doped Zn12O12 clusters: a first-principles study

A first-principles study has been performed to evaluate the structural, electronic, and magnetic properties of Zn(12)O(12) clusters doped with one or two Mn atoms. The substitutional, exohedral, and endohedral dopings are taken into account. For the monodoped clusters, the substitutional isomer is most energetically favorable, and an exohedral isomer may appear as a low-lying metastable state. All isomers present 5 mu(B) magnetic moment that is mainly contributed by the Mn-3d component. For the bidoped clusters, the antiferromagnetic state is degenerate with the ferromagnetic state at larger Mn-Mn distance (>5 A), while it is more energetically favorable at smaller Mn-Mn distance. Thus, the cohesion of bidoped isomer is sensitive to the magnetic coupling or chemical bonding. The endohedral bidoped isomer is found to be a stable local minimum, and the direct Mn-Mn interaction causes the reduction of local magnetic moment of Mn to about 4 mu(B).     

The effects of energy sites on adsorption of Lennard-Jones fluids and phase transition in carbon slit pore of finite length a computer simulation study

A Monte Carlo simulation method is used to study the effects of adsorption strength and topology of sites on adsorption of simple Lennard-Jones fluids in a carbon slit pore of finite length. Argon is used as a model adsorbate, while the adsorbent is modeled as a finite carbon slit pore whose two walls composed of three graphene layers with carbon atoms arranged in a hexagonal pattern. Impurities having well depth of interaction greater than that of carbon atom are assumed to be grafted onto the surface. Different topologies of the impurities; corner, centre, shell and random topologies are studied. Adsorption isotherms of argon at 87.3 K are obtained for pore having widths of 1, 1.5 and 3 nm using a Grand Canonical Monte Carlo simulation (GCMC). These results are compared with isotherms obtained for infinite pores. It is shown that the surface heterogeneity affects significantly the overall adsorption isotherm, particularly the phase transition. Basically it shifts the onset of adsorption to lower pressure and the adsorption isotherms for these four impurity models are generally greater than that for finite pore. The positions of impurities on solid surface also affect the shape of the adsorption isotherm and the phase transition. We have found that the impurities allocated at the centre of pore walls provide the greatest isotherm at low pressures. However when the pressure increases the impurities allocated along the edges of the graphene layers show the most significant effect on the adsorption isotherm. We have investigated the effect of surface heterogeneity on adsorption hysteresis loops of three models of impurity topology, it shows that the adsorption branches of these isotherms are different, while the desorption branches are quite close to each other. This suggests that the desorption branch is either the thermodynamic equilibrium branch or closer to it than the adsorption branch.     

Stabilization of boron clusters with classical fullerene structures by combined doping effect: a quantum chemical study

A combined approach (endohedral doping and exohedral environment) to stabilization of boron clusters with classical fullerene structures has been studied. The boron clusters with classical fullerene structures are stable when heteroatomic part of the complex (endohedral atom and exohedral environment) donates in total 18 electrons to the composite system, stability of which depends on the coordination capabilities and donor ability of the endohedral and surrounding atoms. The most effective stabilization is achieved in the case of the endohedral transition metals atoms, whereas the most effective environment is given by the lithium surrounding.

     

Application of Thermal Analysis for Explaining the Sorption of Benzene and N-Hexane on Silicalite

The origin of kinks (steps) on sorption isotherms was examined for the sorption of benzene and n-hexane on silicalite-1. In both cases sorption revealed the existence of two different binding sites. There was no equilibrium (or a very slow one), between molecules bound at different sites. Sorption energies within particular centres display more or less wide overlapping distributions leading to a single resultant isotherm. Depending on differences in binding energies and degree of overlapping, the resulting isotherms exhibit steps (benzene) or no steps (n-hexane). In fact, the sorption isotherm of benzene being a sum of two elemental isotherms (Ω₁ and Ω₂) of different shapes is characterized by a ‘kink’, in contrast to n-hexane the elemental isotherms of which are of the same shape. This revised version was published online in July 2006 with corrections to the Cover Date.     

C~4~0, C~4~0^+, Nb@C~4~0^+, NbC~3~9^+, Nb@C~4~0H~4^+的 量子化学研究

用量子化学从头计算方法研究了C~4~0,C~4~0^+,Nb@C~4~0^+,NbC~3~9^+,Nb@C~4~0H~4^+的几何构型、电子结构和C~2~8一样,C~4~0(T~d)基态也为^5A~2态,笼骨架上具有四个悬挂键。计算结果表明C~4~0和C~4~0^+比NbC~3~9^+和Nb@C~4~0^+稳定,与实验结果一致。     

C~nSi(n=28,29)各种可能结构的理论研究

利用量子化学从头计算方法研究了C~nSi(n=28,29)各种可能的结构,研究结果表明:C~2~9Si为硅取代碳笼(Fullerens)中一个碳原子而形成的骨0架硅杂碳笼(Fullerenes),而且C~2~9Si最稳定结构是通过硅取代碳笼(C~3~0)最稳定结构中一个碳原子而得到.C~2~9Si比C~3~0有较低的稳定性和较高的化学活性.C~2~8Si有两种类型结构:(I)外接,(Ⅱ)缺位(hole-defect)型,即硅四连接型.计算结果表明,对C~2~8Si,外接硅型化合物更稳定,即(I)为主要成份.而且C~2~8Si最稳定结构是由C~2~8最稳定结构外接硅而形成.计算结果与实验观测一致。     

On the accuracy of DFT-SAPT, MP2, SCS-MP2, MP2C, and DFT+Disp methods for the interaction energies of endohedral complexes of the C(60) fullerene with a rare gas atom

Selected points on the potential energy surface for the complexes Rg@C(60) (Rg = He, Ne, Ar, Kr) are calculated with various theoretical methods, like symmetry-adapted perturbation theory with monomers described by density functional theory (DFT-SAPT), supermolecular M?ller-Plesset theory truncated on the second order (MP2), spin-component-scaled MP2 (SCS-MP2), supermolecular density functional theory with empirical dispersion correction (DFT+Disp), and the recently developed MP2C method that improves the MP2 method for long-range electron correlation effects. A stabilization of the endohedral complex is predicted by all methods, but the depth of the potential energy well is overestimated by the DFT+Disp and MP2 approaches. On the other hand, the MP2C model agrees well with DFT-SAPT, which serves as the reference. The performance of SCS-MP2 is mixed: it produces too low interaction energies for the two heavier guests, while its accuracy for He@C(60) and Ne@C(60) is similar to that of MP2C. Fitting formulas for the main interaction energy components, i.e. the dispersion and first-order repulsion energies are proposed, which are applicable for both endo- and exohedral cases. For all examined methods density fitting is used to evaluate two-electron repulsion integrals, which is indispensable to allow studies of noncovalent complexes of this size. It has been found that density-fitting auxiliary basis sets cannot be used in a black-box fashion for the calculation of the first-order SAPT electrostatic energy, and that the quality of these basis sets should be always carefully examined in order to avoid an unphysical long-range behavior.     

Exohedral silicon fullerenes: SiNPtN/2 (20<or=N<or=60)

Using density functional theory method we show that hollow silicon fullerene cages, SiN (20相似文献   

Effect of temperature on the adsorption behavior of tryptophan in reversed-phase liquid chromatography

Single-component adsorption isotherm data of l-tryptophan on a C(18)-bonded silica column were acquired by frontal analysis (FA), with aqueous mobile phases containing 5% of acetonitrile at five different temperatures between 23 and 62 degrees C. The non-linear fitting of these data provided the bi-Moreau model for all temperatures as the best isotherm model. The inverse method (IM) was used to derive the parameters at these temperatures from the parameters of the 25 degrees C isotherm. The adsorption constants and the saturation capacities of the low and high-energy sites decreases by increasing the temperature, while the adsorbate-adsorbate parameters of both sites increase. An excellent agreement was found between the experimental and calculated overloaded band profiles at all the temperatures used. The breakthrough curves obtained and the overloaded band profiles obtained were found to have different shapes according to the range of concentration studied and the temperatures. At low concentration 0.05-0.5 g/L the breakthrough curves and the overloaded band profiles have a front shock and diffuse rear, which indicates langmuirian behavior, but at intermediate 1-2 g/L and high concentration 8 g/L they start to have diffuse fronts and shocks at the rear or more than one shock at the rear which indicates non-langmuirian behavior. At 23 degrees C the isotherm has another langmuirian part, which appears at high concentration. The behavior of the breakthrough curves is explained by the shape of the isotherm in which all of the isotherms have a langmuirian part (the isotherm is concave upward) and an antilangmuirian part (the isotherm is concave downward). The temperature affected the breakthrough curves by decreasing the time of the appearance of the fronts for all concentration ranges studied, and by decreasing the time difference between the highest concentration and lowest concentration of the fronts, especially the low concentration range at 0.5 g/L. The fronts of the breakthrough curves at high concentration seems to be the most affected by temperature.     

Entrapping of exohedral metallofullerenes in carbon nanotubes: (CsC60)n@SWNT nano-peapods

Exohedral C60-based metallofullerenes, CsC60, have been synthesized and successfully encapsulated into single-wall carbon nanotubes (SWNTs) in high yield by reducing C60 molecules into anions. High-resolution transmission electron microscopy (HRTEM) images and in situ electron energy loss spectroscopy (EELS) indicate that Cs atoms and C60 molecules align within SWNTs as CsC60 exohedral metallofullerenes, and that the formal charge state of encaged CsC60 is expressed as Cs+1C60-1. The present peapods with the exohedral metallofullerenes provide a new insight and the possibility to fine-tune the electronic and transport properties of carbon nanotubes.     

Exohedral reactivity of trimetallic nitride template (TNT) endohedral metallofullerenes

[structures: see text] Fullerenes containing a trimetallic nitride template (TNT) within the cage are a particularly interesting class of endohedral metallofullerenes. Recently two exohedral derivatives of the Sc3N@C80 fullerene have been synthesized: a Diels-Alder and a fulleropyrrolidine cycloadduct. The successful isolation, purification, and structural elucidation of these metallofullerenes derivatives have encouraged us to understand how the chemical reactivity is affected by TNT encapsulation. First of all, we predicted the most reactive exohedral sites, taking into account the double bond character and the pyramidalization angle of the C-C bonds. For this purpose, a full characterization of all different types of C-C bonds of the following fullerenes was carried out: I(h)-C60:1, D3-C68:6140, D3-Sc3N@C68, D(5h)-C70:1, D(3h')-C78:5, D(3h)-Sc3N@C78, I(h)-C80:7 and several isomers of Sc3N@C80. Finally the exohedral reactivity of these TNT endohedral metallofullerenes, via [4 + 2] cycloaddition reactions of 1,3-butadiene, was corroborated by means of DFT calculations.