(C_5H_9C_5H_4)_3NdBrLi(THF)_3和(C_5H_9C_5H_4)_3SmTHF的合成与结构

无水三氯化钕与环戊烷基环戊二烯钠、溴化锂(1:2:1摩尔比)反应,除去不溶物和溶剂后,产物在己烷/四氢呋喃溶剂中冷冻得到兰紫色晶体(C5H9C5H4)3NdBrLi(THF)3(配合物1)。其中心金属Nd3+的配位数为10,以η5与3个环戊二烯基相连,并通过单溴原子桥连锂原子,形成双核结构。该晶体属三斜晶系,P`1空间群。晶体学参数为a=12.048(2)、b=13.498(3)、c=13.831(3);α=104.16(3)、β=104.07(3)、γ=95.96(3); V=2083.3(7)3、Z=2、Dc=1.35Mg/m3、Mr=847.01gmol-1、F(000)=874。无水三氯化钐与环戊烷基环戊二烯钠(1:3)反应,产物在-30oC下的己烷溶剂中结晶得桔红色晶体(C5H9C5H4)3SmTHF(配合物2)。该晶体属正交晶系,Fdd2空间群。晶胞参数a=28.175(5) 、b=46.24(2)、c=9.167(4);V=11943(8)3、Z=16、Dc=1.38Mg/m3、 Mr=622.11 g·mol-1、F(000)=5136。10配位的金属Sm3+与3个环戊二烯基以η5相连,并结合一个四氢呋喃溶剂分子。     

Über die Kristallstruktur von (C6H5)3SiSH und (C6H5)3SiSBr und die Darstellung des Iodsulfans (C6H5)3SiSI

The Crystal Structure of (C₆H₅)₃SiSH and (C₆H₅)₃SiSBr and the Preparation of the Iodosulfane (C₆H₅)₃SiSI The preparation of the halogenosulfanes Ph₃SiSBr and Ph₃SiSI from Ph₃SiSH and N-halogenosuccinimide is reported. They are characterized by vibrational spectroscopic measurements. Ph₃SiSBr crystallizes in space group P1 with a = 899.3(8) pm, b = 941.3(7) pm, c = 1 051.4(7) pm, α = 109.88(5)°, β = 99.23(6)°, γ = 96.78(6)° and Z = 2. Ph₃SiSH crystallizes in space group P2₁/c with a = 1 879.4(8), b = 966.3(5), c = 1 845.2(9), β = 107.84(4), Z = 8. The halogenosulfanes decompose in polar solvents by formation of sulphur and triphenylsilanhalide.     

Photochemical reactions of (CO)2 (PPh3)MnC5H4Fe(CO)2C5H5 and (CO)2(PPh3)MnC5H4COFe(CO)2C5H5 with PPh3

Conclusions The photochemical reactions of (CO)₂(PPh₃)MnC₅H₄Fe(CO)₂C₅H₅ and (CO)₂(PPh₃)MnC₅H₄COFe(CO)₂C₅H₅ with PPh₃ gave the products of replacing the CO on the Fe atom by PPh₃: respectively (CO)₂(PPh₃)MnC₅H₄Fe (CO)(PPh₃)C₅H₅ and (CO)₂(PPh₃)MnC₅H₄COFe(CO)(PPh₃)C₅H₅.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 12, pp. 2813–2815, December, 1977.     

Microwave spectra and the metal-hydrogen bond lengths for the C5H5Mo(CO)3H and C5H5W(CO)3H complexes

The measurements of rotational spectra and metal-hydrogen bond lengths for molybdenum and tungsten hydride complexes were recently completed in our laboratory. The W-H and Mo-H bond lengths were obtained from high resolution rotational spectra of C5H5Mo(CO)3H, C5H5W(CO)3H, C5H5Mo(CO)3D, and C5H5W(CO)3D. Data for five molybdenum and four tungsten isotopomers were obtained for both the normal and deuterium-substituted species. The asymmetric-top rotational parameters A, B, C, DeltaJ, and deltaJ were determined from the least-squares fits and these results indicate that the structures of these complexes are nearly rigid. The hydrogen bond lengths were determined for both complexes using Kraitchman analyses. The molybdenum-hydrogen bond length for the C5H5Mo(CO)3H complex is rMo-H=1.80(1) A. The tungsten-hydrogen bond length for the C5H5W(CO)3H complex is rW-H=1.79(4) A. Density functional theory (DFT) calculations of the structures were performed to obtain the optimized theoretical structures for C5H5Mo(CO)3H and C5H5W(CO)3H. Results obtained from the DFT calculations are in good agreement with the experimental parameters, and the Mo-H value is in good agreement with previously reported Mo-H bond lengths for similar complexes.     

Study of (π-C5H5)2Ti(CH3)Cl and (π-C5H5)2Ti(C6H5)Cl in soluble Ziegler catalysts

Soluble ethylene polymerization catalysts derived from (π-C₅H₅)₂Ti(R)Cl and R ′AlCl₂, where R = methyl or phenyl and R ′ = methyl or ethyl, were studied both by polymerization kinetics at 0°C and by diagnostic experiments. It was found that the first insertion of ethylene into the Ti? R bond is difficult when R = methyl or phenyl, and for this reason these catalysts show a different overall behavior than when R = ethyl or higher alkyl.     

(C5H5)2NdCl·2LiCl 与正丁基锂的反应: [Li(DME)3][(C5H5)3Nd(μ-H)Nd(C5H5)3]的合成及其晶体结构

研究了(C5H5)2NdCl·2LiCl与正丁基锂在THF溶液中的反应, 并从该反应液中分离到了钕的氢化物[Li(DME)3][(C5H5)3Nd(μ-H)Nd(C5H5)3] 1. 化合物1经X射线单晶结构测定表明属单斜晶系, 空间群P21/c, 晶胞参数为a=0.9670(2) nm, b=2.1001(5) nm, c=2.1279(7) nm, β=90.89(2)°, Z=4, V=4.321 (2) nm3, Mr=957.36, Dc=1.47 g·cm-3, F(000)=1936, R=0.094, wR=0.100. 1的晶胞中包含两个独立的晶体分子, 每一分子由阴阳离子对[Li(DME)3]+和[(C5H5)3Nd(μ-H)Nd(C5H5)3]-组成. 钕原子与3个η5-C5H5基团配位, 且两个(C5H5)3Nd经氢桥键相连构成阴离子. Nd1-H和Nd2-H键长均为0.218(1) nm.     

Synthese und Kristallstruktur von (C5H5)Mo(CO)3(AuPPh3) und [(C5H5)Mo(CO)2(AuPPh3)4]PF6

Synthesis and Crystal Structure of (C₅H₅)Mo(CO)₃(AuPPh₃) and [(C₅H₅)Mo(CO)₂(AuPPh₃)₄]PF₆ CpMo(CO)₃(AuPPh₃) is obtained by the reaction of Li[CpMo(CO)₃] with Ph₃PAuCl at ?95°C in CH₂Cl₂. It crystallizes in the monoclinic space group C2/c with a = 2625.1(7), b = 883.2(1), c = 2328.4(7) pm, β = 116.39(1)° und Z = 8. In the complex the AuPPh₃ group is coordinated to the CpMo(CO)₃ fragment with a Au? Mo bond of 271,0 pm. The Mo atom thus achieves a square pyramidal coordination with the center of the Cp ring in apical position. CpMo(CO)₃(AuPPh₃) reacts under uv irradiation with an excess of Ph₃PAuN₃ to afford the cluster cation [CpMo(CO)₂(AuPPh₃)₄]⁺. It crystallizes as [CpMo(CO)₂(AuPPh₃)₄]PF₆ · 2 CH₂Cl₂ in the orthorhombic space group P2₁2₁2₁ with a = 1553.9(1), b = 1793.8(2), c = 2809.8(7) pm und Z = 4. The five metal atoms form a trigonal bipyramidal cluster skeleton with the Mo atom in equatorial position. The Mo? Au distances range from 275.5 to 280.8 pm, and the Au? Au distances are between 281.2 and 285.6 pm.     

Anionic polymerization of methyl methacrylate with Cr(C5H7O2)3–Al(C2H5)3 catalyst system

A homogeneous catalyst system, Cr(C₅H₇O₂)₃–Al(C₂H₅)₃, was used for the polymerization of methyl methacrylate. The yield of polymer increased up to an Al/Cr ratio of 12 and thereafter remained almost constant with increasing Al/Cr. The rate of polymerization increased linearly with increasing catalyst and monomer concentrations at Al/Cr = 12. The molecular weight, however, decreased with increasing catalyst concentration and increased with increasing monomer concentration, indicating anionic polymerization reaction. NMR studies of the polymers indicated the presence of a stereoblock structure, which changed to heteroblock structure in presence of triethylamine and hydroquinone as additives in the catalyst. In the light of these observations, the mechanism of the polymerization is discussed.