Activation/driving force relationships for cyclopropylcarbinyl --> homoallyl-type rearrangements of radical anions

By using direct and indirect electrochemical methods, rate constants (ko) for cyclopropane ring opening of radical anions derived from the one-electron reduction of trans-1-benzoyl-2-phenylcyclopropane, trans-1-benzoyl-2-vinylcyclopropane, 2-methylenecyclopropyl phenyl ketone, spiro[anthracene-9,1'-cyclopropan-10-one], 3-cyclopropylcyclohex-2-en-1-one, and 3-(1-methylcyclopropyl)cyclohex-2-en-1-one were determined. Qualitatively, rate constants for ring opening of these (and other cyclopropyl- and cyclobutyl-containing radical anions) can be rationalized on the basis of the thermodynamic stability of the radical anion, the ability of substituents on the cyclopropyl group to stabilize the radical portion of the distonic radical anion, and the stability of the enolate portion of the distonic radical anion. On the basis of this notion, a thermochemical cycle for estimating deltaG(o) for ring opening was presented. For simple cyclopropyl-containing ketyl anions, a reasonable correlation between log(ko) and deltaG(o) was found, and stepwise dissociative electron transfer theory was applied to rationalize the results. Activation energies calculated with density functional theory (UB3LYP/6-31+G*) correlate reasonably well with measured log(ko). The derived log(ko) and deltaG(o) and log(ko) vs E(a) plots provide the basis for a "calibration curve" to predict rate constants for ring opening of radical anions derived from carbonyl compounds, in general.     

Cyclopropylcarbinyl-type ring openings. Reconciling the chemistry of neutral radicals and radical anions

Cyclopropylcarbinyl --> homoallyl and related rearrangements of radical ions (a) are frequently used as mechanistic "probes" to detect the occurrence of single electron transfer in chemical and biochemical processes, (b) provide the basis for mechanism-based drug design, and (c) are important tools in organic synthesis. Unfortunately, these rearrangements are poorly understood, especially with respect to the effect of substrate structure on reactivity. Frequently, researchers assume that the same factors which govern the reactivity of neutral free radicals also pertain to radical ions. The results reported herein demonstrate that in some cases structure-reactivity trends in radical ion rearrangements are very different from neutral radicals. For radical ions, delocalizations of both charge and spin are important factors governing their reactivity.     

Stepwise solvatochromism of ketyl anions in the gas phase: photodetachment excitation spectroscopy of benzophenone and acetophenone radical anions microsolvated with methanol

Electronic absorption spectra of bare and methanol-solvated radical anions of benzophenone ((C6H5)2CO) and acetophenone ((C6H5)CH3CO) were measured by monitoring the photodetachment efficiency in the gas phase. Strong absorption bands due to autodetachment after transitions to bound excited states were observed. Stepwise spectral shifts approaching the limit of the condensed phase spectra were found to occur as the cluster size increases. In the case of benzophenone radical anion, the solvation of two methanol molecules exhibits the near convergence to the limit, representing the full coordination with the solvent molecules around the carbonyl group. For the acetophenone case, the coordination number was not apparently determined because of their relatively small shifts. Relationships between hydrogen bonding and electronic structure are analyzed for the spectral shifts with the aid of calculations based on density functional theory. The calculational results show that the coordination angle of the solvent molecule is affected mostly by steric hindrance around the carbonyl group, and that there is no evidence for reorientation due to specific hydrogen bonding interaction with the singly occupied orbital, which has been formerly persisted for an interpretation of the transient absorption following pulse radiolysis in alcoholic solutions. An alternative possibility involving deformation with respect to intramolecular coordinates is discussed.     

Structure of radical anions of organosilicon compounds. INDO calculations of the radical anions of some organosilicon compounds

M. V. Lomonosov Moscow Institute of Fine Chemical Engineering. Translated from Zhurnal Strukturnoi Khimii, Vol. 29, No. 2, pp. 24–30, March–April, 1988.     

Generation of ketyl radical anions by photoinduced electron transfer (PET) between ketones and amines. Synthetic applications

Photoreduction of ketones in the presence of amines led to ketyl radicals through photoinduced electron transfer (PET). Tertiary amines, such as triethylamine (Et₃N) have frequently been used in these reactions. Different reactions can occur from ketyl radicals such as photoreduction, coupling reactions, additions on activated double bonds, cyclizations, bond cleavage of strained rings, tandem reactions such as cyclization-ring opening or ring opening-cyclization.     

Silylated thiiran-1-oxides: Structure,ring opening and conversion to a benzothiophene.

Silylated thiirans upon oxidation with peroxyacids do not give exclusively the corresponding S-oxides but, in addition some products derived from ring opening. The stereochemistry of the oxidation to thiiran-1-oxides is $\text{anti}$ to the silyl group as demonstrated by X-ray analysis.     

Binding modes in metal ion complexes of quinones and semiquinone radical anions: electron-transfer reactivity.

9,10-Phenanthrenequinone (PQ) and 1,10-phenanthroline-5,6-dione (PTQ) form 1:1 and 2:1 complexes with metal ions (M (n+)=Sc (3+), Y (3+), Mg (2+), and Ca (2+)) in acetonitrile (MeCN), respectively. The binding constants of PQ--M (n+) complexes vary depending on either the Lewis acidity or ion radius of metal ions. The one-electron reduced species (PTQ(-)) forms 1:1 complexes with M (n+), and PQ(-) also forms 1:1 complexes with Sc(3+), Mg(2+), and Ca(2+), whereas PQ(-) forms 1:2 complexes with Y(3+) and La(3+), as indicated by electron spin resonance (ESR) measurements. On the other hand, semiquinone radical anions (Q(-) and NQ(-)) derived from p-benzoquinone (Q) and 1,4-naphthoquinone (NQ) form Sc(3+)-bridged pi-dimer radical anion complexes, Q(-)--(Sc(3+))(n)--Q and NQ(-)--(Sc(3+))(n)-NQ (n=2 and 3), respectively. The one-electron reduction potentials of quinones (PQ, PTQ, and Q) are largely positively shifted in the presence of M (n+). The rate constant of electron transfer from CoTPP (TPP(2-)=dianion of tetraphenylporphyrin) to PQ increases with increasing the concentration of Sc(3+) to reach a constant value, when all PQ molecules form the 1:1 complex with Sc(3+). Rates of electron transfer from 10,10'-dimethyl-9,9'-biacridine [(AcrH)(2)] to PTQ are also accelerated significantly by the presence of Sc(3+), Y(3+), and Mg(2+), exhibiting a first-order dependence with respect to concentrations of metal ions. In contrast to the case of o-quinones, unusually high kinetic orders are observed for rates of Sc(3+)-promoted electron transfer from tris(2-phenylpyridine)iridium(III) [Ir(ppy)(3)] to p-quinones (Q): second-order dependence on concentration of Q, and second- and third-order dependence on concentration of Sc(3+) due to formation of highly ordered radical anion complexes, Q()--(Sc(3+))(n)--Q (n=2 and 3).     

Molecular orbital calculations of ring opening of the isoelectronic cyclopropylcarbinyl radical, cyclopropoxy radical, and cyclopropylaminium radical cation series of radical clocks

Detailed molecular orbital calculations were directed to the cyclopropylcarbinyl radical (1), the cyclopropoxy radical (2), and the cyclopropylaminium radical cation (3) as well as their ring-opened products. Since a considerable amount of data are published about cyclopropylcarbinyl radicals, calculations were made for this species and related ring-opened products as a reference for 2 and 3 and their reactions. Radicals 1-3 have practical utility as "radical clocks" that can be used to time other radical reactions. Radical 3 is of further interest in photoelectron-transfer processes where the back-electron-transfer process may be suppressed by rapid ring opening. Calculations have been carried out at the UHF/6-31G*, MP4//MP2/6-31G*, DFT B3LYP/6-31G*, and CCSD(T)/cc-pVTZ//QCISD/cc-pVDZ levels. Energies are corrected to 298 K, and the barriers between species are reported in terms of Arrhenius E(a) and log A values along with differences in enthalpies, free energies, and entropies. The CCSD(T)-calculated energy barrier for ring opening of 1 is E(a) = 9.70, DeltaG* = 8.49 kcal/mol, which compares favorably to the previously calculated value of E(a) = 9.53 kcal/mol by the G2 method, but is higher than an experimental value of 7.05 kcal/mol. Our CCSD(T)-calculated E(a) value is also higher by 1.8 kcal/mol than a previously reported CBS-RAD//B3LYP/6-31G* calculation. The cyclopropoxy radical has a very small barrier to ring opening (CCSD(T), E(a) = 0.64 kcal/mol) and should be a very sensitive time clock. Of the three series studied, the cyclopropylaminium radical cation is most complex. In agreement with experimental data, bisected cyclopropylaminium radical cation is not found, but instead a ring-opened species is found. A perpendicular cyclopropylaminium radical cation (4) was found as a transition-state structure. Rotation of the 2p orbital in 4 to the bisected array results in ring opening. The minimum onset energy of photoionization of cyclopropylamine was calculated to be 201.5 kcal/mol (CCSD(T)) compared to experimental values of between about 201 and 204 kcal/mol. Calculations were made on the closely related cyclopropylcarbinyl and bicyclobutonium cations. Stabilization of the bisected cyclopropylcarbinyl conformer relative to the perpendicular species is much greater for the cations (29.1 kcal/ mol, QCISD) compared to the radicals (3.10 kcal/mol, QCISD). A search was made for analogues to the bicyclobutonium cation in the radical series 1 and 2 and the radical cation series 3. No comparable species were found. A rationale was made for some conflicting calculations involving the cyclopropylcarbinyl and bicyclobutonium cations. The order of stability of the cyclopropyl-X radicals was calculated to be X = CH2 > X = O > X = NH2+, where the latter species has no barrier for ring opening. The relative rate of ring opening for cyclopropyl-X radicals X = CH2 to X = O was calculated to be 3.1 x 10(6) s(-1) at 298 K (QCISD).     

The ligand effect in Ti‐mediated living radical styrene polymerizations initiated by epoxide radical ring opening. 1. Alkoxide and bisketonate Ti complexes

Bisketonate and alkoxide Ti(III) complexes derived from Zn reduction of Ti(IV) precursors were evaluated as catalysts for the living radical polymerization (LRP) of styrene initiated by Ti‐catalyzed epoxide radical ring opening and mediated by reversible termination with Ti(III). No polymerization occurred with tris(2,2,6, 6‐tetramethyl‐3,5‐heptanedionato)titanium (III), whereas dichlorobis(2,2,6,6‐tetramethyl‐3,5‐heptanedionato)titanium (IV) affords only a free radical polymerization. Preliminary living features were displayed by (ⁱPrO)₂TiCl₂. Investigations of the effect of epoxide/Ti/Zn ratios, temperature, and nature of the epoxide demonstrated that (ⁱPrO)₃TiCl provides a linear dependence of M_n on conversion over a wide range of conditions with an optimum for [Sty]/[epoxide group]/[Ti]/[Zn] = 50/1/2/4 at 90 °C. However, the polydispersity could not be reduced below 1.4–1.5, with an initiator efficiency of 0.15. These results were rationalized in terms of a combination of decreased Ti oxophilicity and ligand exchange. The lowered oxophilicity decreases the initiation rate and broadens M_w/M_n. The fast alkoxide exchange promotes a weak dependence of the polymerization on reaction conditions and generates macromolecular Ti species with reduced ability to mediate LRP. Thus, while monofunctional epoxides provide homogeneous polymerizations and narrower M_w/M_n, difunctional initiators may lead to gel formation at high conversion. Nonetheless, all polymerizations were light gray to colorless and afforded white polymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6028–6038, 2005     

Generation and reactivity of ketyl radicals with lignin related structures. On the importance of the ketyl pathway in the photoyellowing of lignin containing pulps and papers

[reaction: see text] Ketyl radicals with lignin related structures have been generated by means of radiation chemical and photochemical techniques. In the former studies ketyl radicals are produced by reaction of alpha-carbonyl-beta-aryl ether lignin models with the solvated electron produced by pulse radiolysis of an aqueous solution at pH 6.0. The UV-vis spectra of ketyl radicals are characterized by three main absorption bands. The shape and position of these bands slightly change when the spectra are recorded in alkaline solution (pH 11.0) being now assigned to the ketyl radical anions and a pKa = 9.5 is determined for the 1-(3,4,5-trimethoxyphenyl)-2-phenoxyethanol-1-yl radical. Decay rates of ketyl radicals are found to be dose dependent and, at low doses, lie in the range (1.7-2.7) x 10(3) s(-1). In the presence of oxygen a fast decay of the ketyl radicals is observed (k2 = 1.8-2.7 x 10(9) M(-1) s(-1)) that is accompanied by the formation of stable products, i.e., the starting ketones. In the photochemical studies ketyl radicals have been produced by charge-transfer (CT) photoactivation of the electron donor-acceptor salts of methyl viologen (MV2+) with alpha-hydroxy-alpha-phenoxymethyl-aryl acetates. This process leads to the instantaneous formation of the reduced acceptor (methyl viologen radical cation, MV+*), as is clearly shown in a laser flash photolysis experiment by the two absorption bands centered at 390 and 605 nm, and an acyloxyl radical [ArC(CO2*))(OH)CH2(OC6H5)], which undergoes a very fast decarboxylation with formation of the ketyl radicals. Steady-state photoirradiation of the CT ion pairs indicates that 1-aryl-2-phenoxyethanones are formed as primary photoproducts by oxidation of ketyl radicals by MV2+ (under argon) or by molecular oxygen. Small amounts of acetophenones are formed by further photolysis of 1-aryl-2-phenoxyethanones and not by beta-fragmentation of the ketyl radicals. The high reactivity of ketyl radicals with oxygen coupled with the low rates of beta-fragmentation of the same species have an important bearing in the context of the photoyellowing of lignin containing pulps and papers.     

Titanium‐mediated living radical styrene polymerizations. V. Cp2TiCl‐catalyzed initiation by epoxide radical ring opening: Effect of solvents and additives

The effects of solvents, additives, ligands, and solvent in situ drying agents as well as catalyst and initiator concentrations have been investigated in the Cp₂TiCl‐catalyzed radical polymerization of styrene initiated by epoxide radical ring opening. On the basis of the solubilization of Cp₂Ti(III)Cl and the polydispersity of the resulting polymer, the solvents rank as follows: dioxane ≥ tetrahydrofuran > diethylene glycol dimethyl ether > methoxybenzene > diphenyl ether ≥ bulk > toluene ? pyridine > dimethylformamide > 1‐methyl‐2‐pyrrolidinone > dimethylacetamide > ethylene carbonate, acetonitrile, and trioxane. Alkoxide additives such as aluminum triisopropoxide and titanium(IV) isopropoxide are involved in alkoxide ligand exchange with the epoxide‐derived titanium alkoxide and lead to broad molecular weight distributions, whereas similarly to strongly coordinating solvents, ligands such as bipyridyl block the titanium active site and prevent the polymerization. By contrast, softer ligands such as triphenylphosphine improve the polymerization in less polar solvents such as toluene. Although mixed hydrides such as lithium tri‐tert‐butoxyaluminum hydride, sodium borohydride, and lithium aluminum hydride react with bis(cyclopentadienyl)titanium dichloride to form mixed titanium hydride species ineffective in polymerization control, simple hydrides such as lithium hydride, sodium hydride, and especially calcium hydride are particularly effective as in situ trace water scavengers in this polymerization. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2015–2026, 2006     

Synthesis of chroman-4-one and indanone derivatives via silver catalyzed radical ring opening/coupling/cyclization cascade

A variety of chroman-4-one and indanone derivatives were conveniently synthesized from readily available cyclopropanols and alkenyl aldehydes via a silver catalyzed radical ring-opening/coupling/cyclization cascade. The reaction proceeded under mild and neutral conditions with broad substrate scope and afforded the desired products in moderate to good yields. A probable mechanism for the cascade reaction was also proposed.     

Radical ion reactivity—I : Application of the dewar-zimmerman rules to certain reactions of radical anions and cations

The application of the Dewar-Zimmerman rules to the interaction between radical cations, derived from 4n + 2 systems, shows that a nucleophile orbital interacting suprafacially with the ion should correspond to an antiaromatic transition state and hence to a less favored pathway relative to competing ones, e.g. electron transfer. An antarafacial interaction would on the other hand correspond to an aromatic transition state and be energetically favorable. Both types of interaction are generally possible for the same reagent, but since the suprafacial one for geometric reasons ensues and thus predominates in the early stage of the reaction, the net result should be an anomalously low reactivity of radical cations vs attack by nucleophiles.By calibration against known, qualitative reactivity data for perylene radical cation it is strongly indicated that halide ions belong to a class of reagents which do not react nucleophilically with radical cations but instead undergo electron transfer oxidation or do not react at all. This type of reaction is discussed in some detail. and several mechanisms involving radical cation/halide ion combination as a critical step can either be ruled out or considered open for reinvestigation.The same idea can be applied to the reaction between radical anions and electrophiles. Accordingly, the protonation of radical anions derived from 4n+2 aromatic systems is remarkably slow, as compared to that of analogous carbanions.     

Titanium‐mediated living radical styrene polymerizations. VI. Cp2TiCl‐catalyzed initiation by epoxide radical ring opening: Effect of the reducing agents,temperature, and titanium/epoxide and titanium/zinc ratios

The effects of the reducing agent, temperature, and epoxide/Ti and Ti/Zn ratios were investigated for the Cp₂TiCl‐catalyzed living radical polymerization of styrene initiated by epoxide radical ring opening. No reduction of bis(cyclopentadienyl)titanium dichloride occurred with Cu, Devarda's alloy, Ni, Ce, Cr, Sn, Mo, and ascorbic acid, whereas Al, lithium nitride, Mn, Sm, and Fe led to free‐radical or poorly controlled polymerizations. The best results were obtained with Zn alloy, powder, or nanoparticles. Nano‐Zn provided the lowest polydispersity index values, highest initiator efficiency (IE), and fastest reaction rate while maintaining a well‐defined living polymerization. Progressively lower polydispersity was obtained with an increasing excess of Zn with an optimum at Cp₂TiCl/Zn = 1/2. This was rationalized through the heterogeneous nature of Zn and its possible involvement in the reversible termination step. The polymerization was insensitive to light or dark conditions, and a linear dependence of M_n on the conversion was observed at all temperatures in the 60–130 °C range with an optimum at 70–90 °C. A stoichiometric 1/2 epoxide/Ti ratio provided low polydispersity (weight‐average molecular weight/number‐average molecular weight < 1.2) and high IE, whereas increasing the epoxide/Ti ratio to 1/3 maintained a low polydispersity index but decreased the IE. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2156–2165, 2006     

The ligand effect in Ti‐mediated living radical styrene polymerizations initiated by epoxide radical ring opening. 2. Scorpionate and half‐sandwich LTiCl3 complexes

The ligand effect and the reaction conditions for the living radical polymerization of styrene initiated by epoxide radical ring opening was investigated in a series of piano‐stool, Ti(IV) scorpionate and, half‐sandwich metallocenes (LTiCl₃; L = Tp, Cp*, Ind and Cp, where Tp = hydrotris(pyrazol‐1‐ylborato), Cp* = pentamethylcyclopentadienyl, Ind = indenyl and Cp = cyclopentadienyl). The polymerization is mediated by the reversible termination of the growing chains with Ti(III) species derived from Zn reduction of parent Ti(IV) derivatives. A poor performance was observed for TpTiCl₃ because of probable over‐reduction. The strong electron donating effect of Cp* accounts for a strong C? Ti chain end bond and consequently, a living‐like process is observed only at T > 110 °C. However, both Ind and Cp ligands provide a linear dependence of M_n on conversion and narrow polydispersity over a wide range of experimental conditions. Investigation of the effect of temperature and reagent ratios generates an optimum for epoxide/CpTiCl₃/Zn = 1/2/4 at 70–90 °C. On the basis of a combination of steric and electronic properties, the ligands rank as Cp ≥ Ind ? Cp* ? Tp. This trend is different from coordination polymerization, and in conjunction with our previous results on Cp₂TiCl₂, further supports a radical mechanism. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6039–6047, 2005     

Free‐radical polymerization of dioxolane and dioxane derivatives: Effect of fluorine substituents on the ring opening polymerization

Partially fluorinated and perfluorinated dioxolane and dioxane derivatives have been prepared to investigate the effect of fluorine substituents on their free‐radical polymerization products. The partially fluorinated monomer 2‐difluoromethylene‐1,3‐dioxolane (I) was readily polymerized with free‐radical initiators azobisisobutyronitrile or tri(n‐butyl)borane–air and yielded a vinyl addition product. However, the hydrocarbon analogue, 2‐methylene‐1,3‐dioxolane (II), produced as much as 50% ring opening product at 60 °C by free‐radical polymerization. 2‐Difluoromethylene‐4‐methyl‐1,3‐dioxolane (III) was synthesized and its free‐radical polymerization yielded ring opening products: 28% at 60 °C, decreasing to 7 and 4% at 0 °C and −78 °C, respectively. All the fluorine‐substituted, perfluoro‐2‐methylene‐4‐methyl‐1,3‐dioxolane (IV) produced only a vinyl addition product with perfluorobenzoylperoxide as an initiator. The six‐membered ring monomer, 2‐methylene‐1,3‐dioxane (V), caused more than 50% ring opening during free‐radical polymerization. However, the partially fluorinated analogue, 2‐difluoromethylene‐1,3‐dioxane (VI), produced only 22% ring opening product with free‐radical polymerization and the perfluorinated compound, perfluoro‐2‐methylene‐1,3‐dioxane (VII), yielded only the vinyl addition polymer. The ring opening reaction and the vinyl addition steps during the free‐radical polymerization of these monomers are competitive reactions. We discuss the reaction mechanism of the ring opening and vinyl addition polymerizations of these partially fluorinated and perfluorinated dioxolane and dioxane derivatives. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5180–5188, 2004     

Dipole–reaction field interaction model for the solvent reorganization energy and its application to the benzoquinone–benzoquinone anion radical system

 Based on the spherical cavity approximation and the Onsager model, a dipole–reaction field interaction model has been proposed to elucidate the solvent reorganization energy of electron transfer (ET). This treatment only needs the cavity radius and the solute dipole moment in the evaluation of the solvent reorganization energy, and fits spherelike systems well. As an application, the ET reaction between p-benzoquinone and its anion radical has been investigated. The inner reorganization energy has been calculated at the level of MP2/6–31+G, and the solvent reorganization energies of different conformations have been evaluated by using the self-consistent reaction field approach at the HF/6–31+G level. Discussions have been made on the cavity radii and the values are found to be reasonable when compared with the experimental ones of some analogous intramolecular ET reactions. The ET matrix element has been determined on the basis of the two-state model. The fact that the value of the ET matrix element is about 10 times larger than RT indicates that this ET reaction can be treated as an adiabatic one. By invoking the classical Marcus ET model, a value of 4.9 × 10⁷M⁻¹s⁻¹ was obtained for the second-order rate constant, and it agrees quite well with the experimental one. Received: 19 October 2001 / Accepted: 17 January 2002 / Published online: 3 May 2002     

Synthesis of cyclopropyl silyl ethers and their facile ring opening by photoinduced electron transfer as key step in radical/radical cationic cascade reactions

Various ring-fused cyclopropyl silyl ethers with an benzylic, olefinic or acetylenic side chain have been synthesized. Upon oxidative photoinduced electron transfer (PET) the cyclopropane ring opens and forms a reactive β-keto radical, which undergoes intramolecular cyclization. In some cases we observed only formation of ring opened non-cyclized products. With olefinic side chain 5-exo-trig mode of cyclization rather than 6-endo-trig mode of cyclization takes place whereas in case of acetylenic side chain we observed 6-endo cyclization.     

Topography of cyclopropyl radical ring opening to allyl radical on the CASSCF(3,3) surface: valley-ridge inflection points by Newton trajectories

Valley-ridge inflection points (VRI) on the potential energy surface for the ring opening of the cyclopropyl radical to the allyl radical are determined using the tool of Newton trajectories (NTs) (Quapp and Schmidt in Theor Chem Acc 128:47, 2011). The UHF surface is treated in a former paper (Quapp et?al. in Theor Chem Acc 129:803, 2011). This paper is the extension to the more expensive CASSCF(3,3) surface. We compare the results on the UHF surface with the more appropriate calculation: there are quantitative as well as qualitative changes, of course. But many fundamental relations are the same on both surfaces. However, we could detect new pathways on the CASSCF(3,3) surface which highlight the bifurcation problem of this radical. VRIs play a role in the understanding of bifurcating reactions. The region where the bifurcation takes place is governed by a VRI point. Because the transition state of the ring opening is not symmetric, the steepest descent (SD) from the transition state is not along a symmetry axis either, and in this case the SD usually fails a downhill VRI point. The SD from the transition state of the ring opening goes to the disrotatory minimum of the allyl radical. In contrast, we find some pathways which end at the conrotatory minimum, and which go along so-called non steepest descent paths, at least in parts. The region of interest (around the SP of the ring opening) is crossed by electronic intersection seams. Conical intersection points on the seam can be detected by NTs. We use the possibility to explore parts of the intersection seam of the lower CAS surface and we determine connected VRI points being the corner stones of the possible ring opening channels in the disrotatory and the conrotatory case.     

Chain transfer to solvent in the radical polymerization of N‐isopropylacrylamide

Chain transfer to solvent has been investigated in the conventional radical polymerization and nitroxide‐mediated radical polymerization (NMP) of N‐isopropylacrylamide (NIPAM) in N,N‐dimethylformamide (DMF) at 120 °C. The extent of chain transfer to DMF can significantly impact the maximum attainable molecular weight in both systems. Based on a theoretical treatment, it has been shown that the same value of chain transfer to solvent constant, C_tr,S, in DMF at 120 °C (within experimental error) can account for experimental molecular weight data for both conventional radical polymerization and NMP under conditions where chain transfer to solvent is a significant end‐forming event. In NMP (and other controlled/living radical polymerization systems), chain transfer to solvent is manifested as the number‐average molecular weight (M_n) going through a maximum value with increasing monomer conversion. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011