Substituent dependence of the d-d transition band in the electronic absorption spectra of arylferrocenes and the corresponding arylferricenium salts

The electronic absorption spectra of 22 arylferrocenes and their arylferricenium salts with pentacyanopropenide (PCNP) were recorded. The attemptedHammett correlation of _max of the d-d transition bands of arylferrocenes revealed that this band is substituent dependent only for strong electron-withdrawing substituents. Excellent correlation of _max of the d-d transition bands with ⁺ constants was found in the case of arylferricenium cations. Good correlations of _max was also found with theE _1/2 oxidation potentials measured by cyclic voltametry.

---

Substituentenabhängigkeit des d-d-Überganges in den Elektronenabsorptions-Spektren von Arylferrocenen und entsprechenden Arylferricenium-Salzen

Zusammenfassung Elektronenabsorptions-Spektren von 22 Arylferrocenen und ihren Arylferricenium-Pentacyanopropenid-Salzen wurden gemessen. VersuchteHammett-Korrelationen des längstwelligen d-d-Überganges (_max) zeigten, daß diese Bande nur von stark elektronenanziehende Substituenten abhängig ist. Im Fall der Arylferricenium-Kationen wurde eine ausgezeichnete Korrelation zwischen _max der d-d-Bande und den ⁺-Konstanten festgestellt. Eine gute Korrelation der _max-Werte wurde auch mit denE _1/2 Oxidationspotentialen gefunden, die durch cyclische Voltametrie meßbar sind.

     

Synthese von Metallkomplexen des Tetra-(2,3-anthra)-tetraazaporphins und Vergleich ihrer Elektronenabsorptionsspektren mit denen anderer anellierter Tetraazaporphinsysteme

Copper, nickel and aluminium derivatives of tetra-2,3-anthratetraazaporphin bearing different substituents in the anthracen part have been prepared. The absorption spectra of these substances in different solvents are given and compared with metal complexes of other linearly annellated tetraazaporphins. In the series of vanadyl complexes of tetraazaporphin (_max 597 nm), tetra-[1,2-(4-tert-butyl)-benzo]-tetraazaporphin (_max 698 nm), tetra-[2,3-(6-tert-butyl)-naphtho]-tetraazaporphin (_max 807 nm), tetra-2,3-(anthra)-tetraazaporphin (_max 932 nm), tetra-2,3-(tetraceno)-tetraazaporphin (_max 1055 nm), the absorption maxima of the Q-band are shifted per annellated benzene ring about 100 nm to longer wave lengths.

     

Four spectrophotometric methods for determination of nitrofurazone in pharmaceutical formulations

Four simple and sensitive visible spectrophotometric methods (A-D) for the determination of nitrofurazone in bulk samples and pharmaceutical formulations are described. They are based on the formation of colored species by treating either its reduction product with 3-methylbenzothiazolin-2-one hydrazone in the presence of ferric chloride (method A: _max 600 nm) or its hydrolysis product with thiobarbituric acid (method B: _max 520 nm, 440 nm) or barbituric acid (method C: _max 400 nm) or by oxidizing it with excess N-bromosuccinimide and determining the consumed NBS using metol-isonicotinic acid hydrazide (method D: _max 620 nm).     

Simultaneous determination of yohimbine and boldine by first-derivative synchronous spectrofluorimetry

A method for the simultaneous determination of yohimbine and boldine in mixtures by first-derivative synchronous spectrofluorimetry has been developed. The method is based on their native fluorescence in 0.1N sulphuric acid medium. The constant wavelength difference chosen to optimize the determination was =_em -_em=82 nm. Yohimbine was measured at _ex//_em= 285/367 nm, and boldine at _ex/_em=272/354 nm. The range of application is 10–500 g/l for yohimbine and 1–50 g/l for boldine. The method was applied to the determination of yohimbine and boldine in synthetic mixtures and pharmaceuticals, with errors generally 2%. Relative standard deviations were about 2%.Dedicated to Professor Fermin Capitán on his 72th birthday     

Spectrophotometric estimation of ketotifen fumarate in pharmaceutical formulations

Four simple and sensitive spectrophotometric methods (A–D) for the determination of Ketotifen fumarate in bulk samples and pharmaceutical formulations are described. They are based on the formation of coloured species by the coupling of the diazotised sulphanilamide with the drug (method A, _max 520 nm) or by oxidizing it with excessN-bromo-succinimide and determining the consumed NBS with decrease in colour intensity of celestine blue (method B: _max 540 nm) or by the reduction of Folin-Ciocalteau reagent (method C: _max 720 nm) or by the formation of a chloroform-soluble, coloured ionassociation complex between the drug and Azocarmine G at pH 1.5 (method D: _max 540 nm). Regression analysis of Beer-Lambert plots showed good correlations in the concentration ranges 1–10, 2–12, 4–28 and 2.5–25 g/ml for methods A–D, respectively. The validity of the proposed methods was tested by analysing pharmaceutical formulations containing KTF: the relative standard deviations were within ±1.0%. Recoveries were 98.9–100.2%.     

Unicyclic Graphs with Minimal Energy

If G is a graph and ₁,₂,..., _n are its eigenvalues, then the energy of G is defined as E(G)=|₁|+|₂|++| _n |. Let S _n ³ be the graph obtained from the star graph with n vertices by adding an edge. In this paper we prove that S _n ³ is the unique minimal energy graph among all unicyclic graphs with n vertices (n6).     

Fluordiazadiphosphetidine, 23. Mitt.: Die Herstellung neuer unsymmetrisch substituierter Fluordiazadiphosphetidine

Summary Using 1-chloromethyl-2,2,2,4,4,4-hexafluoro-3-methyl-1,3,2⁵,4⁵-diazadiphosphetidine as starting material for nucleophilic reactions, the following new compounds were prepared: 2,2,2,4,4-pentafluoro-4-methoxy-1-propyl-3-methyl-1,3,2⁵,4⁵-diazadiphosphetidine, 1-benzyl-2,2,2,4,4-pentafluoro-4-methoxy-3-methyl-1,3,2⁵,4⁵-diazadiphosphetidine, and 1-benzyl-2,2,2,4,4-pentafluoro-4-methylamino-3-methyl-1,3,2⁵,4⁵-diazadiphosphetidine

     

Fluordiazadiphosphetidine, 24. Mitt.: Reaktion monosubstituierter Fluordiazadiphosphetidine mit Kaliumfluorid/Kronenether

Summary The reactivity of some monosubstituted fluorodiazadiphosphetidines towards potassium fluoride utilizing 18-crown-6-ether as a phase transfer catalyst has been studied. The following compounds were investigated: 2,2,2,4,4-pentafluoro-4-methoxy-1,3-dimethyl-1,3,2⁵,4⁵-diazadiphosphetidine, 2,2,2,4,4-pentafluoro-4-methylamino-1,3-dimethyl-1,3,2⁵,4⁵-diazadiphosphetidine, 2,2,2,4,4-pentafluoro-4-methylthio-1,3-dimethyl-1,3,2⁵,4⁵-diazadiphosphetidine, and a 1:1 mixture of 2,2,2,4,4-pentafluoro-4-(N²,N²-dimentyl-hydrazino)-1,3-dimethyl-1,3,2⁵,4⁵-diazadiphosphetidine and 2,2,2,4,4-pentafluoro-4-methylamino-1,3-dimethyl-1,3,2⁵,4⁵-diazadiphosphetidine. All reactions proceeded in a similar way and led to the disubstituted derivates of the starting materials and the potassium salt K₂(CH₃NPF₄)₂. In this way 2,2,4,4-tetrafluoro-2-methylamino-4-(N²,N²-dimethylhydrazino)-1,3-dimethyl-1,3,2⁵,4⁵-diazadiphosphetidine has been synthesized for the first time and a new way has been found for the synthesis of several compounds reported in literature.

Verstorben     

Solvent extraction and spectrophotometric including graphite furnace atomic absorption determination of molybdenum in the environment

A selective and sensitive method for the extraction and microgram determination of molybdenum (VI) with hydroxamic acid as yellow molybdenum-hydroxamate complex from acidic medium is described. The molybdenum-PCPPSAHA complex has _max 388 nm, molar absorptivity 5.0 × 10³l mol^–1 cm^–1. The system obeys Beer's law in the range of 1–28 g/ml of molybdenum(VI). Sandell's sensitivity is 0.0192 g cm² and stoichiometry of the complex is 12, molybdenum: PCPPSAHA while mixed complex molybdenum-PCPPSAHA-morin has _max 400 nm and molar absorptivity 5.9 × 10³lmo1^–1 cm^–1 and stoichiometry of the complex is 121.The molybdenum is determined by graphite furnace atomic absorption spectrophotometry after directly pipetted the extract into the furnace which increases the sensitivity 20 fold.     

Ein Ger?t zur h?chstempfindlichen Differentialspektrophotometrie mit dem Rapidspektroskop

Zusammenfassung Eine Methode zur Differentialspektrophotometrie durch Modulation eines Monochromators wird beschrieben. Der Monochromator oscilliert mit variabler Bandbreite zwischen ₁ und ( ₁+). Wenn ( ₁+) die Wellenlänge des Absorptionsmaximums ist, erscheint am Photo multiplierausgang einer Sinuswelle, deren Amplitude der Extinktions differenz zwischen ¹ und ( ₁+) proportional ist. Die Schaltung zur ultralinearen Messung dieser Amplitude ist angegeben und ihre Anwendung mit dem Zweistrahlphotometer Rapidspektroskop gezeigt. Die Empfindlichkeit wird durch die Kombination um den Faktor 10 bis 100 gesteigert. Der Rauschpegel ist bei der Monochromator-Modulationstechnik etwa 10^–4 E.Das Differentialspektrum stellt die erste Ableitung eines Spektrums dar und gestattet die genauere Lokalisation von Schultern in steilen Flanken eines Spektrums. Die Kombination der beschriebenen Methode mit der Technik des Rapidspektroskops erlaubt es, dasselbe mit gleichem Erfolg wie ein Dual-Wavelength-Gerät einzusetzen.

---

Summary A method for differential spectrophotometry by modulation of a single monochromator is described. A single monochromator oscillates with variable bandwidth between ₁ and ( ₁+ ). If ( ₁ + ) is the wavelength at maximal optical density, the photomultiplier output gives a sinus-wave, the amplitude of which is proportional to the optical density difference between ₁ and ( ₁+). The circuit for ultralinear measurement of this amplitude is described and details of its application with the split-beam spectrophotometer Rapidspektroskop are given. The sensitivity of the entire assembly is increased by a factor of between ten and one hundred. The noise level of the monochromator-modulated technique is about 10^–4 optical density units. The differential spectrum represents the first derivative of a spectrum and allows one to determine more exactly the location of shoulders in the slope of a spectrum.The combination of the described method with the techniques of the Rapid spektroskop thus provides facilities which equal those of a dual-wavelength apparatus.

     

Selective determination of copper with pyridoin phenylhydrazone as chromogenic extraction reagent

Summary The synthesis, characteristics and analytical applications of pyridoin phenylhydrazone are described. It reacts with copper(I) to produce an orange 11 complex ( _max=450 nm,=2.1×10⁴l· mole^–1·cm^–1) in aqueous ethanolic solution; it behaves as a cuproin type reagent. The orange complex can be extracted into amyl alcohol ( _max=440 nm,=2.0×10⁴l·mole^–1·cm^–1), and used for the spectrophotometric determination of trace amounts of copper. Interferences have been investigated.

---

Zusammenfassung Synthese, Eigenschaften und analytische Anwendung von Pyridoin-phenylhydrazon wurden beschrieben. Es reagiert mit Cu(I) unter Bildung eines orange gefärbten 11-Komplexes in wäßrig-alkoholischer Lösung ( _max=450 nm,=2,1×10⁴l·mol^–1·cm^–1); das Reagens verhält sich ähnlich wie Cuproin. Der erwähnte Komplex läßt sich mit Amylalkohol extra-hieren ( _max=440 nm,=2,0×10⁴l·mol^–1·cm^–1) und zur spektrophoto-metrischen Bestimmung von Kupferspuren benützen. Auftretende Störungen wurden angegeben.

     

Spectrophotometric methods for the determination of labetalol hydrochloride in pure and dosage forms

Simple and sensitive Spectrophotometric methods for the determination of labetalol hydrochloride are described. The first two are based on the oxidative coupling reaction of labetalol hydrochloride withp-N,N-dimethyl-phenylenediamine dihydrochloride (method A, _max 685 nm) and 3-methyl-2-benzothiazolinone hydrazone hydrochloride (method B, _max 545 nm) in the presence of sodium hypochlorite and eerie ammonium sulphate as oxidants, respectively. The third depends on the formation of an ion-association complex of labetalol hydrochloride with suprachen violet 3B at pH 1.3, which is extracted into chloroform (method C, _max 565 nm). The methods obey Beer's law and the precision and accuracy of the methods were checked against the B.P. reference method and the relative standard deviations were in the range 0.35–0.52%. These methods are applied to the determination of labetalol in dosage forms.     

Improved spectrophotometric determination of uranium(VI) with 4-(2-pyridylazo)resorcinol in the presence of benzyldimethylstearyltrimethylammonium chloride

An improved spectrophotometric determination of uranium(VI) is proposed using 4-(2-pyridylazo)resorcinol(PAR) in the presence of benzyldimethylstearyltrimethylammonium chloride(BSTAC) as a cationic surfactant. The calibration graph is linear in the range of 0.3–60 g/10 ml uranium(VI), measuring the absorbance at 550 nm. The reproducibility for 19.0 g/10 ml uranium(VI) is 0.57%. The third-derivative method using the third-derivative distance (d³A/d³) among ₁ 530 nm, ₃ 594 nm and ₂ 565 nm was also investigated.     

Extract-photometric determination of vanadium(V) with 3-indole-acetohydroxamic acid

Summary A spectrophotometric study has been carried out of the violet complex 3-indole-acetohydroxamic acid-vanadium extracted into a solution of trioctylmethyl-ammonium chloride in toluene [_max 525 nm; =5381 l mol^–1 cm^–1; stoichiometry 1:3 (metal:reagent)]. A new method for the extract-spectrophotometric determination of V⁵⁺ in the range of 2–7 g/g is proposed and interferences by foreign ions were investigated. The method has been satisfactorily applied to the determination of vanadium(V) in fuel oil. The relative error is ±2.9%.     

Photometric determination of trivalent gallium,indium and thallium with Xylenol orange

Summary Xylenol orange reacts very sensitively with gallium(III), indium (III) and thallium(III) to form reddish violet colored chelates having _max 560 nm in case of Ga and In and _max 590 nm in case of Ti at P_H 4.0. The molar ratio for all the chelates is 1 1 (metal reagent). Optimum conditions including the range for adherence to Beer's law, effect of P_H on the color intensity, effect of excess reagent, and sensitivity are reported for the photometric determination of these metal ions using Xylenol orange.

---

Zusammenfassung Xylenolorange reagiert sehr empfindlich mit Gallium(III), Indium(III) und Thallium(III) unter Bildung rötlich-violetter Chelate mit einem Absorptionsmaximum bei 560 nm im Falle von Ga und In bzw. 590 nm für Tl bei p_H 4,0. Das Molverhältnis ist in jedem Fall 11. Die besten Arbeitsbedingungen, der Gültigkeitsbereich des Beerschen Gesetzes, der Einfluß des P_H auf die Farbintensität und des Reagensüberschusses sowie die Empfindlichkeit werden für die photometrische Bestimmung der genannten Ionen angegeben.

     

Photometrische Bestimmung von Zirkoniumoxidchlorid in Speisesalz

Zusammenfassung 2-Chinolylfluoron bildet mit Zirkonium einen 14-Komplex, dessen Extinktionskoeffizient bei 539 nm _max=165000 ist. Das Bestimmungsverfahren für ZrOCl₂ in Speisesalz wird auf dieser Farbreaktion aufgebaut.

---

Photometric determination of ZrOCl₂ in table salt

2-Quinolylfluorone forms a 14-complex with zirconium. Owing to its high extinction coefficient _max=165000 at =539 nm the complex can be used for the determination of ZrOCl₂ in table salt.

     

Study of colour-developing factors in spectrophotometric determination of cyanide by the pyridine-barbituric acid method

Summary The decomposition of cyanide-pyridine-barbituric acid in the wavelength around _max=583 nm gives rise to formation of a new color species around _max=490nm. Both reactions are first-order reactions with the same K value of 0.066 hr^–1, but with opposite sign. The pH value, the nature and concentration of the buffer solution influence absorption to a considerable extent. A method for estimation of cyanide is suggested.

---

Untersuchung der Farbbildungsfaktoren bei der spektrophotometrischen Bestimmung von Cyanid nach der Pyridin-Barbitursäure-Methode

Zusammenfassung Die Zersetzung von Cyanid-Pyridin-Barbitursäure bei der Bandbreite um _max=583 nm verursacht die Bildung einer neuen Farbspecies um _max=490 nm. Beide Reaktionen sind solche erster Ordnung mit dem selben K-Wert von 0,066 hr^–1, aber mit umgekehrtem Vorzeichen. pH-Wert, Art und Konzentration der Pufferlösung beeinflussen die Absorption in beträchtlichem Maß. Eine Methode zur Bestimmung von Cyanid wird vorgeschlagen.

     

Optical Properties of Thallium(I) Perrhenate. Thallium-Localized Phosphorescence

Summary. The salt Tl⁺ReO₄ ^– shows a strong luminescence at _max=400nm which originates from the lowest-energy sp triplet of Tl⁺. A low-energy Tl^IRe^VII metal-to-metal charge transfer excited state has not been observed.     

Luminescence of dimeric Tl(I)-complexes: Metal-metal interaction in the electronically excited state

Summary Dimeric diethyldithiocarbamatethallium(I) [Et ₂NCS₂Tl]₂ shows a red emission at _max=608 nm which undergoes a huge Stokes shift with regard to the excitation maximum at =246 nm. It is suggested that the emission originates from a sp excited state which is characterized by strong metal-metal bonding.

---

Lumineszenz von dimeren Tl(I)-Komplexen: Metall-Metall-Wechselwirkung im elektronisch angeregten Zustand (Kurze Mitt.)

Zusammenfassung Dimeres Thallium(I)diethyldithiocarbamat [Et ₂NCS₂Tl]₂ zeigt eine rote Emission mit _max=608 nm und eine große Stokes'sche Verschiebung im Bezug auf das Anregungsmaximum von =246 nm. Die Emission wird einem sp angeregten Zustand zugeordnet, der durch eine starke Metall-Metall Wechselwirkung charakterisiert ist.

     

Sensitive spectrophotometric methods for the determination of pindolol

Two simple, sensitive and reproducible visible spectrophotometric methods for the determination of Pindolol in amounts as low as 1 g are described. The first method is based on the oxidation of Pindolol by sodium nitrite under acidic conditions and the coupling of the oxidised intermediate withN-1-(naphthyl)ethylenediamine dihydrochloride (NED) to the colored product. The spectrum of the colored solution is strongly dependent on the length of the incubation period at room temperature during oxidation (3 min, _max 620 nm; 10 min or above _max 540 nm). Other couplers [diphenylamine (DPA) or 1-naphthylamine (-NA)] or indole derivatives (indole, tryptophan or isatin) when used instead of NED or Pindolol, respectively, also react to give a colored product with same maximum in each case irrespective of the length of the incubation period during oxidation. The second method is based on the coupling reaction involving Pindolol and 1,2-naphthaquinone-4-sulphonic acid sodium salt to form a coloured product (_max 660 nm). Both the methods have been employed to determine Pindolol content in bulk forms and pharmaceutical preparations.