Determination of inorganic and methylmercury in fish by cold vapor atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry

Simple and rapid analytical procedures for the determination of Hg²⁺ and methylmercury in fish were proposed after careful optimization of chemical and instrumental parameters for Hg measurement by cold vapor (CV)/hydride generation (HG) atomic absorption spectrometry (AAS) and CV/HG inductively coupled plasma atomic emission spectrometry (ICP-AES). Quantitative extraction of Hg species avoiding any inter-species conversion was achieved by fast microwave assisted solubilization of fish tissue with relatively low amount of tetramethylammonium hydroxide (TMAH) or 6 mol L^− 1 HCl. After careful optimization of chemical parameters selective determination of Hg²⁺ in the presence of excess of methylmercury is attained by using continuous flow CV AAS, 1% m/V SnCl₂ as reductant and 0.1 mol L^− 1 HCl as reaction medium. Simple calibration curve prepared with aqueous standard of Hg²⁺ is recommended for its quantification. Both Hg²⁺ and methylmercury could be determined simultaneously with equal sensitivity by CV/HG ICP-AES directly in the diluted TMAH solution obtained after extraction with 1% m/V NaBH₄ as reductant. Quantification of the sum of Hg²⁺ and methylmercury against calibration curve prepared with aqueous standard of methylmercury is suggested. It should be mentioned that batch hydride generation system with quartz tube heated in air/acetylene flame could also be used for simultaneous determination of both Hg species in fish extracts, with standard additions calibration. The validity of the developed analytical procedures for selective determination of Hg²⁺ and methylmercury (by difference between the total Hg and Hg²⁺) is confirmed by the analyses of certified reference material DOLT-1 and reference material IMEP-20. Very close agreement between certified values and analytical results was found.     

电感耦合等离子体原子发射光谱（ICP-AES）法测定铁矿石中钒

建立了电感耦合等离子体原子发射光谱(ICP-AES)法测定铁矿石中钒含量的分析方法。采用盐酸、硝酸、氢氟酸、高氯酸分解试样,不溶物残渣碱熔融回收,稀盐酸溶解盐类的方式对样品进行分解。对仪器的主要工作参数和分析谱线进行了选择,讨论了基体和共存元素的干扰,以及溶解酸和熔剂等条件实验,确立了最佳分析条件。按实验方法对铁矿石标准样品和试样中钒量进行测定,测定值与标准值或其它方法的认定值基本一致,相对标准偏差RSD<6.5%。     

Determination of trace elements in Antarctic krill samples by inductively coupled atomic emission and graphite furnace atomic absorption spectrometry

Analytical methods were developed for the determination of trace elements in Antarctic krill samples applying inductively coupled plasma atomic emission spectrometry (ICP-AES) and graphite furnace atomic absorption spectrometry (GF-AAS). Cu, Fe, Mn and Zn were determined by ICP-AES, while Cd and Pb by GF-AAS technique. Two microwave assisted digestion procedures were elaborated for the preparation of 0.5-g krill samples using open and closed vessel systems. The efficiency of the digestion processes was checked by measurements of the total organic carbon content of the solutions obtained. The deviations of the analytical data from the certified values and the relative standard deviations of the concentration measurements were lower for all six elements investigated applying the closed vessel digestion system.     

Determination of uranium in organic solutions by inductively coupled plasma atomic emission spectrometry

The determination of uranium in organic solutions by inductively coupled plasma atomic emission spectrometry is reported. The conditions for achieving plasma stability were determined as well as the optimum conditions (RF power, observation height and argon flow) of a spectrometer for analysis of U(II) 367.007 nm in three organic solvents, xylene, kerosine and benzene. The effects of RF power and observation height on signal-to-back-ground ratio and the detection limits are considered. Spectral interferences due to CN band are discussed.A part of this work was presented at the Second Karlsruhe International Conference on Analytical Chemistry in Nuclear Technology Karlsruhe, FRG, June 5–9, 1989.     

Determination of myo-inositol hexakisphosphate (phytate) in urine by inductively coupled plasma atomic emission spectrometry

Myo-inositol hexakisphosphate (phytate) is a substance present in urine with an important role in preventing calcium renal calculi development. In spite of this, the use of urinary phytate levels on stone-formers’ evaluation and treatment is still notably restricted as a consequence of the enormous difficulty to analyze this substance in urine. In this paper, a simple procedure for routinary urinary phytate determination based on phosphorus determination through inductively coupled plasma atomic emission spectrometry is described.The method only requires a previous separation of phytate from other components by column anion exchange chromatography. The working linear range used was 0-2 mg l⁻¹ phosphorus (0-7 mg l⁻¹ phytate). The limit of detection was 64 μg l⁻¹ of phytate and the limit of quantification was 213 μg l⁻¹. The relative standard deviation (R.S.D.) for 1.35 mg l⁻¹ phytate was 2.4%. Different urine samples were analyzed using an alternative analytical methodology based on gas chromatography (GC)/mass detection used for inositol determination (phytate was previously hydrolyzed), resulting both methods comparable using as criterion to assess statistical significance P<0.05.     

Speciation of mercury by continuous flow liquid-liquid extraction and inductively coupled plasma atomic emission spectrometry detection

An accurate, precise, sensitive and automated non-chromatographic method for methylmercury speciation based on a selective continuous liquid-liquid extraction of methylmercury, into xylene, as bromide and cold mercury vapour generation directly from the organic phase and final ICP-AES mercury detection is proposed. Both separation steps, liquid-liquid and gas-liquid are accomplished in a continuous mode and on line with ICP-AES as detector. The detection limit attained for methylmercury was 4ng·ml^–1 (as mercury). The precision of the determination at a concentration level around 20 times the detection limit was +-5%. The proposed methodology has been applied successfully to the speciation of methylmercury and inorganic mercury in spiked sea water and spiked urine samples.     

电感耦合等离子体发射光谱法测定高效复合孕育剂中铝、钙、钡

通过硝酸、氢氟酸和盐酸分解试料,高氯酸冒烟驱走硅和氟,最后用盐酸溶解盐类,应用电感耦合等离子体发射光谱(ICP-AES)法对高效复合孕育剂中铝、钙、钡进行测定,此方法能准确、快速地测定其含量,回收率在98%～103%之间,精密度、标准样品分析对照均取得了满意的结果。     

电感耦合等离子体发射光谱法同时测定玻璃中的硫和磷

通过对玻璃试样中硫、磷的分解方法、分析线选择、共存元素光谱干扰和仪器最佳分析条件等方面的研究, 建立了ICP-AES 测定玻璃中硫、磷的方法. 选用紫外区谱线S 181.972 nm、 P 177.434 nm, 避免了基体元素对硫、磷的干扰, 该法能够准确、快速地测定玻璃样品中的硫、磷量, 测定结果的相对标准偏差小于2.9%, 方法的检出限分别为 S 0.07 μg/mL, P 0.08 μg/mL, 已用于玻璃样品的分析.     

电感耦合等离子体原子发射光谱法测定木家具油漆涂层中的可溶性铅

涂料中的重金属Pb会损害人体骨髓造血系统和神经系统,并对儿童的生长发育产生不利影响.目前大部分标准指定采用原子吸收法测定涂料中的重金属;但该方法操作繁琐、检测周期长.为此,采用电感耦合等离子体原子发射光谱法(ICP-AES;具有分析速度快、准确度高、可同时检测多种元素等优点)测定木家具油漆涂层中可溶性Pb的含量,探讨了...     

电感耦合等离子体发射光谱法测定铜阳极泥中的金含量

实验采用某铜冶炼生产企业的铜阳极泥样品,对其中的金含量进行测试。用王水溶解样品,在3%王水酸度下,定容至100mL容量瓶,用电感耦合等离子体发射光谱法测定。经试验研究,选择242.795nm为分析谱线,方法检出限为(n=11)0.09μg/mL,测定下限为0.27μg/mL,加标回收率在97%-107%之间,线性相关系数为：0.999928,分析结果满足要求。     

Determination of phosphorus in fertilizers by inductively coupled plasma atomic emission spectrometry

An inductively coupled plasma atomic emission spectrometry (ICP-AES) method was developed for the determination of phosphorus in fertilizers. Total phosphorus, direct extraction available phosphorus (EDTA), and water-soluble phosphorus, reported as phosphorus pentoxide (P205), in 15 Magruder check fertilizers were measured by ICP-AES, and the results were compared with those obtained by the AOAC official method. Five analytical wavelengths of phosphorus, 177.499, 178.287, 213.618, 214.914, and 253.565 nm, were tested for the determination of phosphorus in fertilizers, and their detection limits were obtained. Acid effects of perchloric acid and possible matrix effects of aluminum, calcium, magnesium, potassium, and sodium were negligible for phosphorus determination. Wavelength 213.618 nm was the best analytical wavelength for phosphorus determination by all 3 sample preparation methods for the selected Magruder fertilizers. The results demonstrated that the accuracy and precision of the ICP-AES method were comparable with those of the official methods.     

Nanometer-size titanium dioxide microcolumn on-line preconcentration of trace metals and their determination by inductively coupled plasma atomic emission spectrometry in water

A new method using a microcolumn packed with nanometer TiO₂ as solid-phase extractant has been developed for the simultaneous preconcentration of trace amounts of Cu, Mn, Cr and Ni prior to their measurements by inductively coupled plasma atomic emission spectrometry (ICP-AES). Effects of pH, sample flow rate and volume, elution solution and interfering ions on the recovery of the analytes have been investigated. The adsorption capacity of nanometer TiO₂ was found as 0.108, 0.149, 0.039 and 0.034 mmol g⁻¹ for Cu, Cr, Mn and Ni, respectively. The separation of analytes can be achieved from water samples with a concentration factor of 50 times. The method has been applied for the determination of trace elements in biological sample and lake water with satisfactory results.     

Determination of trace elements in human serum by inductively coupled plasma atomic emission spectrometry with flow injection

An analytical method for the simultaneous determination of some trace elements (Au, Fe, Mg, Li, Sr, Zn) in human serum by inductively coupled plasma atomic emission spectrometry (ICP-AES) with flow injection is described. Physical interference caused by the change of sample viscosity is discussed. When 100 μl of serum was injected, the relevant recoveries of > 99% for Li, > 98% for Cu and Mg, > 95% for Fe were obtained for an NIST SRM with R.S.D. > 1.3% using optimized flow injection parameters. The prepared lyophilized control serum for routine analysis in clinical laboratories was analyzed and verified for the validity of the technique employed in this experiment using NIST SRM 909 as a primary reference material.     

Analysis of yttrium aluminium borate crystals by solution-based methods: inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry

Comparative analysis of yttrium aluminium borate (YAB) /YAl₃(BO₃)₄/ optical single crystals was performed by flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods for Cr, Dy, Er, Yb, Y, Al, B and Mo. The dopant element, Ce, could be determined only by the ICP-AES method at the required concentration level. The powdered crystal samples were fused with lithium metaborate (LiBO₂) at 950 °C in a platinum crucible and then dissolved in 6 mol l⁻¹ HCl. Although this fusion-dissolution procedure proved to be simple and effective, the quantitative determination of B—as the matrix element in samples—was handicapped by the B content of the fusing reagent. For the FAAS method, with the use of nitrous oxide–acetylene flame, cesium chloride ionization buffer and lanthanum chloride releasing agent [0.1+0.2% (m/v), respectively] were applied. These agents enhanced the atomic absorption signals of Cr, Dy, Er, Mo, Yb and Y, whereas no change of sensitivity was resulted in for Al and B. A fairly good agreement was found between the results of the two alternative spectrochemical methods. The predicted stoichiometry of the crystals was also well approximated indicating the reliability of the crystal growth technology applied.     

Determination of trace amounts of Sb,Pb, Tl in water samples by inductively coupled plasma atomic emission spectrometry after a diantipyrylmethane-iodide third phase preconcentration

A preconcentration method based on third phase extraction has been developed and combined with inductively coupled plasma atomic emission spectrometry (ICP-AES) for determination of Sb, Pb, Tl at trace levels in water samples. The reagents diantipyrylmethane and potassium iodide were applied for complexing Sb, Pb, Tl and producing a third phase extraction system. This third phase system produces relatively large enrichment factors and complete isolation of trace elements from high salt-containing matrices which influence strongly the plasma condition. Experimental parameters of the extraction, such as concentrations of complexing reagents, pH and extraction time have been optimized. Under the selected conditions, this third phase ICP-AES combination procedure gave multielemental detection limits for Sb, Pb, Tl which are superior by an order of magnitude or more to those obtained by ICP-AES alone without preconcentration. Precision of the technique is better than 10% at the 10 g/l level. The accuracy of this approach is demonstrated by its application to tapwater, artificial seawater and reference seawater samples.     

ICP-AES 法测定硅铁中痕量元素

采用电感耦合等离子原子发射光谱法测定硅铁中的痕量元素,研究了 Fe 基体对被测元素的影响,并选择了最佳工作条件.被测元素的检测限为 0 .60～76.2 ng/mL,样品加标回收率为 92%～108%,RSD(n=8)<3%.     

电感耦合等离子体原子发射光谱法测定钛合金中锆

建立电感耦合等离子体原子发射光谱法(ICP-AES)测定钛合金中锆元素的含量。采用盐酸-氢氟酸-硝酸溶解钛合金样品,选择357.247 nm为锆的分析谱线,通过基体匹配法消除基体钛的干扰,以电感耦合等离子体原子发射光谱法测定钛合金中锆的含量。锆的质量分数在0%~0.4%范围内与光谱强度呈良好的线性关系,相关系数大于0.999,定量下限为0.21%。测定结果的相对标准偏差小于2%(n=11),样品加标回收率为99.0%~102.7%。该方法快速、准确,能够满足实际生产中钛合金样品的测定要求。     

Determination of the ZnGeP2 composition by inductively coupled plasma atomic emission spectrometry

A procedure employing inductively coupled plasma atomic emission spectroscopy has been developed for the precise determination of the composition of Zn_{1 + x}Ge_{1 + x}P_{2 + x} alloys after their autoclave digestion. An optimal composition of the acid mixture has been chosen and the conditions preventing element losses in the digestion process have been found. To minimize the error of the developed procedure, the optimal concentration of Zn, Ge, and P in the analytes was found by calculating the results of analysis as atomic ratios Zn : Ge and P : Ge. The accuracy of the developed procedure was confirmed by the standard addition method and the comparison of the results with the results of an independent method. The relative standard deviation of the determination of atomic ratios was 0. 7–2.0%.     

电感耦合等离子体原子发射光谱法测定高温合金中低含量钇

建立电感耦合等离子体原子发射光谱法测定高温合金中低含量钇的方法。采用盐酸、硝酸、氢氟酸溶解样品,在优化的仪器条件下,采用基体匹配法配制系列标准工作溶液,选择分析线为360.073 nm。钇的含量在0.0005%~0.050%范围内与光谱强度具有良好的线性关系,相关系数为0.99999,检出限为0.000003%。该方法测定结果的相对标准偏差不大于6.0%(n=8),加标回收率为90.0%~104.0%。该方法简便、快速、准确,可用于高温合金中低含量钇的测定。