Phase transition,structural, mechanical and thermal properties of erbium pnictides under pressure

In this article, we have investigated the high-pressure structural phase transition of erbium pnictides (ErX; X?=?N, P and As). An extended interaction potential model has been developed (including the zero-point energy effect in three-body interaction potential model). Phase transition pressures are associated with a sudden collapse in volume. The phase transition pressures and associated volume collapses have been predicted successfully. The elastic constants, their combinations and pressure derivatives are also reported. The pressure behaviour of elastic constants, bulk modulus and shear modulus have been presented and discussed. Moreover, the thermophysical properties such as molecular force constant (f), infrared absorption frequency (υ ₀), Debye temperature (θ _D) and Grunneisen parameter (γ) have also been predicted.     

高压下RhB的相变、弹性性质、电子结构及硬度的第一性原理计算

采用密度泛函理论中的赝势平面波方法系统地研究了高压下RhB的结构相变、弹性性质、电子结构和硬度.分析表明,RhB在25.3 GPa时从anti-NiAs结构相变到FeB结构,这两种结构的弹性常数、体弹模量、剪切模量、杨氏模量和弹性各向异性因子的外压力效应明显.电子态密度的计算结果显示,这两种结构是金属性的,且费米能级附近的峰随着压强的增大向两侧移动,赝能隙变宽,轨道杂化增强,共价性增强,非局域化更加明显.此外,硬度计算结果显示,anti-NiAs-RhB的金属性比较弱,有着较高的硬度,属于硬质材料.     

Structural phase stability and elastic behavior of III-V scandium pnictides

A modified interaction potential (MIPM) model (including the covalency effect) has been developed and applied for the first time to investigate the high-pressure structural phase transition of scandium pnictides (ScAs and ScSb). Phase transition pressures are associated with a sudden collapse in volume indicating the occurrence of first order phase transition. The phase transition pressures and associated volume collapses obtained from present potential model show a generally better agreement with available experimental data than others. The elastic constants and their pressure derivatives are also reported. Moreover, the thermo physical properties have also been obtained successfully. Our results are in good agreement with available experimental and theoretical data.     

Electronic,mechanical, phase transition,and thermo-physical properties of TMC (TM = V,Nb, and Ta): high pressure ab initio study

The structural, electronic, mechanical, phase transition, and thermo-physical properties of refractory carbides, viz. VC, NbC, and TaC have been computed in stable B1 and high pressure B2 phases by means of two different ab initio calculations using pseudo- and full-potential schemes. These materials have mixed covalent-, metallic-, and ionic-type bonding. The calculations of elastic constants show the mechanical stability of these materials in B1 phase only. The brittle nature and anisotropy is observed in these materials in B1 phase. Non-central forces are present in both the phases. Elastic wave velocities and Debye temperature have also been calculated. The present results on structural, phase transition, elastic, and other properties are in reasonably good agreement with the available experimental and theoretical data. The calculations in high pressure phase need experimental verification.     

Elastic,electronic and thermal properties of topological insulator SmB6: first-principles calculations

Abstract

The pressure dependence of the structural, elastic, electronic and thermal properties of Kondo insulator SmB₆ have been systematically studied by density functional theory combined with the quasi-harmonic Debye model. The calculated structure at zero pressure is in good agreement with the available experimental results at low temperature. The obtained elastic constants, bulk modulus and shear modulus indicate that SmB₆ is mechanically stable and behaves in a brittle manner under the applied pressure 0–20 GPa, consistent with available experimental data. In addition, the elastic-relevant properties, Young’s modulus and the Poisson ratio manifest that increasing pressure results in an enhancement in the stiffness of the compound. It is found that unlike temperature, pressure has little effect on the heat capacity of SmB_6. What more important is that we observed an insulator to metal phase transition at about 5.5 GPa through the disappearance of the band gap, well consistent with the experimental data. This transition has little effect on the physical properties of SmB₆.     

Structural and elastic properties of InX (X = P,As, Sb) at pressure and room temperature

We have investigated the pressure-induced phase transition of InX (X = P, As, Sb) from Zinc-Blende (ZB) to NaCl structure by using realistic interaction potential model involving the effect of temperature. This model consists of Coulomb interaction, three-body interaction and short-range overlap repulsive interaction upto the second nearest neighbor involving temperature. Phase-transition pressure is associated with a sudden collapse in volume, showing the incidence of first-order phase transition. The phase-transition pressure is associated with volume collapses, and the elastic constants obtained from the present model indicate good agreement with the available experimental and theoretical data.     

Structures, phase transition, elastic properties of SnO2 from first-principles analysis

We investigate the structural, phase transition and elastic properties of SnO₂ in the rutile-type, pyrite-type, ZrO₂-type and cotunnite-type phases by the plane-wave pseudopotential density functional theory method. The lattice constants, bulk modulus and its pressure derivative are well consistent with the available experimental and other theoretical data. Also, we find that the rutile→pyrite, pyrite→ZrO₂ and ZrO₂→cotunnite phase transition occur at 12.9, 59.1 and 111.1 GPa, which are in better agreement with the experimental results than those of Gracia et al. (2007). Moreover, we obtain the pressure dependences of elastic constants for the four structures.     

Elastic properties of alkaline earth oxides under high pressure

In this article, we have investigated the high-pressure structural phase transition of alkaline earth oxides using the three-body potential (TBP) model. Phase transition pressures are associated with elastic constants. An effective inter-ionic interaction potential (TBP) with long-range Coulomb interactions and the Hafemeister–Flygare type short-range overlap repulsion and the vdWl interaction is developed. The present calculations have revealed reasonably good agreement with the available experimental data on structural transition (B1–B2 structure). The phase transition pressures Pt of MgO, CaO, SrO, and BaO occur at 220, 45, 40, and 100?GPa, respectively. Further, the variations of the second-order elastic constants with pressure have followed a systematic trend, which are almost identical to those exhibited by the observed data measured for other semiconducting compounds with rocksalt (B1)-type crystal structure. It is found that TBP promises that we would be able to predict phase transition pressure and elastic constants for other chalcogenides as well. The results may be useful for geophysical study.     

Structural phase transition and elastic properties of Curium and Uranium monobismuthides under pressure effect

A density functional (DFT) calculations of the structural, elastic and high pressure properties of the cubic XBi (X=U,Cm) compounds, has been reported using the full potential linear muffin-tin orbital (FP-LMTO) method. In this approach the local density approximation (LDA) is used for the exchange-correlation (XC) potential. Results are given for lattice constant, bulk modulus and its pressure derivatives. The pressure transitions at which these compounds undergo structural phase transition from NaCl-type (B1) to CsCl-type (B2) phase were found to be in good agreement with the available theoretical results. We have determined the elastic constants C₁₁, C₁₂, C₄₄ and their pressure dependence which have not been established experimentally or theoretically.     

Structural and elastic properties of barium chalcogenides (BaX,X=O,Se, Te) under high pressure

In the present paper we have investigated the high-pressure, structural phase transition of Barium chalcogenides (BaO, BaSe and BaTe) using a three-body interaction potential (MTBIP) approach, modified by incorporating covalency effects. Phase transition pressures are associated with a sudden collapse in volume. The phase transition pressures and associated volume collapses obtained from TBIP show a reasonably good agreement with experimental data. Here, the transition pressure, NaCl-CsCl structure increases with decreasing cation-to-anion radii ratio. In addition, the elastic constants and their combinations with pressure are also reported. It is found that TBP incorporating a covalency effect may predict the phase transition pressure, the elastic constants and the pressure derivatives of other chalcogenides as well.      

Electronic,elastic and dynamical properties of MgSe under pressure: rocksalt and iron silicide phase

The electronic, elastic and dynamical properties of MgSe in the rocksalt (B1) and iron silicide (B28) phase and the effects of pressure on these properties are investigated using first-principles method. The calculated electronic band structure indicates that the B1 phase of MgSe presents an indirect band-gap feature and the band gaps initially increase with pressure and subsequently decrease upon compression. Remarkably, an indirect-to-direct band-gap transition has been observed at the phase transition pressure. The elastic constants, bulk modulus, shear modulus, Young’s modulus, elastic anisotropy and B/G ratio of MgSe in the B1 and B28 phase at high pressure have also been investigated. The bulk modulus, shear modulus and Young’s modulus all increase monotonously with the increasing of pressure for the B1 and B28 phase of MgSe. The calculated phonon frequencies of the B1 phase at zero pressure agree well with available theoretical results. And the transverse acoustic phonon TA(X) mode of this phase completely softening to zero at 82 GPa. The phonon curves of the B28 phase under pressure have also been successfully investigated.     

First principles study of the structural,electronic, mechanical and superconducting properties of WX (X=C,N)

The structural, electronic, mechanical and superconducting properties of tungsten carbide (WC) and tungsten nitride (WN) are investigated using first principles calculations based on density functional theory (DFT). The computed ground state properties, such as equilibrium lattice constant and cell volume, are in good agreement with the available experimental data. A pressure induced structural phase transition is observed in both tungsten carbide and nitride, from a tungsten carbide phase (WC) to a zinc blende phase (ZB), and from a zinc blende phase (ZB) to a wurtzite phase (WZ). The electronic structure reveals that these materials are metallic at ambient conditions. The calculated elastic constants obey the Born-Huang criteria, suggesting that they are mechanically stable at normal and high pressure. Also, the superconducting transition temperature is estimated for the WC and WN in stable structures at atmospheric pressure.     

Phonon dispersion and Raman spectra of wurtzite InAs under pressure

The authors have systematically studied the vibrational properties of wurtzite InAs at high pressure within the Density Functional Theory scheme. It is found that pressure significantly affects the phonon dispersion curves and Raman spectra. We observed an indication of phase transition for WZ-InAs at about 10 GPa. The elastic constants calculation show mechanical stability for WZ-InAs. The calculated values of structural parameters are in good agreement with available data. There is a quadratic increase in optical modes with pressure while the LO–TO splitting and effective charge decrease linearly with pressure.     

Effect of covalency,zero-point energy and charge transfer on the phase-transition,elastic and thermophysical properties of Ca-chalcogenides under compression

The pressure induced phase-transition, elastic and thermophysical properties of Ca-chalcogenides have been investigated by means of many body potential. The modified charge transfer potential consists of long-range Coulomb and charge-transfer interactions modified by covalency and short-range overlap repulsion extended up to second neighbours and zero-point energy effects. Another charge-transfer model excludes covalency and zero-point energy effects. These chalcogenides undergo first-order phase-transition at P _T = 39.23, 36.30 and 31.20 GPa and their equation of state show volume collapse of 10.12, 7.61 and 4.55% for CaS, CaSe and CaTe, respectively, which are in good agreement with the experiments. The elastic and thermophysical properties of these compounds have also been computed at normal and high pressures. Both the models are capable of explaining the Cauchy-discrepancy (C₁₂ ≠ C₄₄), elastic, phase-transition and thermophysical properties successfully.     

Structural stability of TiO and TiN under high pressure

The high pressure phase transition and elastic behavior of Transition Metal Compounds (TiO and TiN) which crystallize in NaCl-structure have been investigated using the three body potential model (TBPM) approach. These interactions arise due to the electron-shell deformation of the overlapping ions in crystals. The TBP model consists of a long range Coulomb, three body interactions, and the short-range overlap repulsive forces operative up to the second neighboring ions. The authors of this paper estimated the values of the phase transition pressures, associated volume collapses, and elastic constants, all of which were found to be closer to available experimental data than other calculations. Thus, the TBPM approach promises to predict the phase transition pressure and pressure variations of elastic constants of Transition Metal compounds.      

Characterisation of the high-pressure structural transition and elastic properties in boron arsenic

This paper carries out the First principles calculation of the crystal structures (zinc blende (B3) and rocksalt (B1)) and phase transition of boron arsenic (BAs) based on the density-functional theory. Using the relation between enthalpy and pressure, it finds that the transition phase from the B3 structural to the B1 structural occurs at the pressure of 113.42GPa. Then the elastic constants C₁₁, C₁₂, C₄₄, bulk modulus, shear modulus, Young modulus, anisotropy factor, Kleinman parameter and Poisson ratio are discussed in detail for two polymorphs of BAs. The results of the structural parameters and elastic properties in B3 structure are in good agreement with the available theoretical and experimental values.     

High pressure behavior of alkaline earth tellurides

We have predicted high pressure structural behavior and elastic properties of alkaline earth tellurides (AETe; AE = Ca, Sr, Ba) by using two body interionic potential approach with modified ionic charge (Z _m e). This method has been found quite satisfactory in case of the rare earth compounds. The equation of state curve, structural phase transition pressure from NaCl (B1) to CsCl (B2) phase and associated volume collapse at transition pressure of alkaline earth tellurides (AETe) obtained from this approach, so have been compared with experimentally measured data reveal good agreement. We have also investigated bulk modulus, second and third order elastic constants and pressure derivatives of second order elastic constants at ambient pressure which shows predominantly ionic nature of these compounds. First time, we have calculated the Poisson ratio, Young and Shear modulus of these compounds.      

高压下钨弹性和热力学性质的第一性原理研究

本文利用密度泛函理论研究了高压下bcc结构钨的弹性和热力学性质,计算得到钨的晶格常数、体弹模量以及其对压强的一阶偏导与实验值符合较好;在常压下弹性常数计算值与实验值符合较好的基础上,预测了其高压数据.针对钨的固相结构稳定性问题,根据力学稳定判断标准得到0~600 GPa范围内bcc结构是力学稳定的.此外,通过体模量和剪切模量的计算得到bcc结构钨在压力低于600 GPa时的力学性能表现为韧性.最后,基于准简谐德拜模型,成功预测了钨的热膨胀系数、等压热容、等容热容和熵随着压强和温度的变化关系,为钨及其合金的进一步设计及应用提供参考.     

高压下钨弹性和热力学性质的第一性原理研究

本文利用密度泛函理论研究了高压下bcc结构钨的弹性和热力学性质,计算得到钨的晶格常数、体弹模量以及其对压强的一阶偏导与实验值符合较好;在常压下弹性常数计算值与实验值符合较好的基础上,预测了其高压数据.针对钨的固相结构稳定性问题,根据力学稳定判断标准得到0~600 GPa范围内bcc结构是力学稳定的.此外,通过体模量和剪切模量的计算得到bcc结构钨在压力低于600 GPa时的力学性能表现为韧性.最后,基于准简谐德拜模型,成功预测了钨的热膨胀系数、等压热容、等容热容和熵随着压强和温度的变化关系,为钨及其合金的进一步设计及应用提供参考.     

Structural and elastic properties of KBr at high pressure and high temperature

To study phase transition and elastic properties at high pressures and high temperatures, we have developed a realistic interaction potential model (RIPZ_pe) including temperature effects. This model is completely suitable for explaining the inter-atomic interaction involved at high temperature and high pressure as it includes the three-body interaction (TBI) and zero point energy effects. The phase transition of KBr crystal at high pressure and high temperatures including the TBI is done for the first time. We have estimated the phase transition pressures, volume collapses and elastic behaviour at various high pressure and high temperatures by RIPZ_pe approach and the results found are well suited with available experimental data.