Thermodynamics of micellization of tapered statistical copolymers of ethylene oxide and propylene oxide in water

Two tapered statistical copolymers were prepared by the oxyanionic polymerization of ethylene oxide and propylene oxide and characterized by gel permeation chromatography and 13C NMR spectroscopy. We denote the copolymers t-E/P38 and t-E/P30, where E = oxyethylene, OCH2CH2, and P = oxypropylene, OCH2CH(CH3), and the number denotes the mole percentage P. In each case the copolymer chain length was ca. 100 oxyalkylene units. The association of the copolymers to form micelles in aqueous solution was checked by dynamic light scattering. The critical micelle temperatures (cmt) of the copolymers at several concentrations were determined by static light scattering and dye solubilization, and values of the apparent standard enthalpy of micellization (DeltamicHapp0) were obtained. For both copolymers, a low value of DeltamicHapp0 was found when the copolymer concentration exceeded ca. 150 g dm(-3).     

Rheological behavior of aqueous micellar solutions of a triblock copolymer of ethylene oxide and 1,2-butylene oxide: B10E410B10

A triblock copolymer of ethylene oxide and 1,2-butylene oxide, denoted B10E410B10, was prepared by sequential oxyanionic polymerization and characterized by 13C NMR spectroscopy and gel permeation chromatography. Micellization and the formation of micelle clusters in dilute aqueous solution, the latter a consequence of micelle bridging, was confirmed by dynamic light scattering, and average association numbers of the micelles were determined by static light scattering for T = 20-40 degrees C. The frequency dependence of the dynamic storage and loss moduli was investigated for solutions in the range of 5-20 wt %. Comparison with results for poly(oxyethylene) dialkyl ethers (10 wt %, T = 25 degrees C) indicated that the viscoelasticity of a copolymer with terminal B10 hydrophobic blocks was roughly equivalent to one with terminal C14 alkyl chains. The temperature dependence of the modulus was investigated for 15 wt % solutions at T = 5-40 degrees C. Superposition of the data led, via an Arrhenius plot, to an activation energy for the relaxation process of -40 kJ mol(-1). The negative value contrasts with the positive values found for poly(oxyethylene) dialkyl ethers and related HEUR copolymers with urethane-linked terminal alkyl chains. This difference is attributed to the block-length distribution in copolymer B10E410B10, whereby the activation energy of the relaxation process has a positive contribution from the disengagement of B blocks from micelles but a negative contribution from micellization. The negative value of the activation energy for solutions of B10E410B10 was confirmed by determining the temperature dependence of the zero-shear viscosity of its 15 wt % solution.     

Effect of ethanol on the micellization and gelation of pluronic p123

In certain applications copolymer P123 (E21P67E21) is dissolved in water-ethanol mixtures, initially to form micellar solutions and eventually to gel. For P123 in 10, 20, and 30 wt % aqueous ethanol we used dynamic light scattering from dilute solutions to confirm micellization, oscillatory rheometry, and visual observation of mobility (tube inversion) to determine gel formation in concentrated solutions and small-angle X-ray scattering (SAXS) to determine gel structure. Except for solutions in 30 wt % aqueous ethanol, a clear-turbid transition was encountered on heating dilute and concentrated micellar solutions alike, and as for solutions in water alone (Chaibundit et al. Langmuir 2007, 23, 9229) this could be ascribed to formation of wormlike micelles. Dense clouding, typical of phase separation, was observed at higher temperatures. Regions of isotropic and birefringent gel were defined for concentrated solutions and shown (by SAXS) to have cubic (fcc and hcp) and hexagonal structures, consistent with packed spherical and elongated micelles, respectively. The cubic gels (0, 10, and 20 wt % ethanol) were clear, while the hex gels were either turbid (0 and 10 wt % ethanol), turbid enclosing a clear region (20 wt % ethanol), or entirely clear (30 wt % ethanol). The SAXS profile was unchanged between turbid and clear regions of the 20 wt % ethanol gel. Temperature scans of dynamic moduli showed (as expected) a clear distinction between high-modulus cubic gels (G'max approximately 20-30 kPa) and lower modulus hex gels (G'max<10 kPa).     

Block copolymers of ethylene oxide and phenyl glycidyl ether: micellization, gelation, and drug solubilization

Three triblock copolymers of ethylene oxide and phenyl glycidyl ether, type E(m)G(n)E(m), where G = OCH2CH(CH2OC6H5) and E = OCH2CH2, were synthesized and characterized by gel-permeation chromatography, matrix-assisted laser desorption ionization time-of-flight mass spectrometry, and NMR spectroscopy. Their association properties in aqueous solution were investigated by surface tensiometry and light scattering, yielding values of the critical micelle concentration (cmc), the hydrodynamic radius, and the association number. Gel boundaries in concentrated micellar solution were investigated by tube inversion, and for one copolymer, the temperature and frequency dependence of the dynamic moduli served to confirm and extend the phase diagram and to highlight gel properties. Small-angle X-ray scattering was used to investigate gel structure. The overall aim of the work was to define a block copolymer micellar system with better solubilization capacity for poorly soluble aromatic drugs than had been achieved so far by use of block copoly(oxyalkylene)s. Judged by the solubilization of griseofulvin in aqueous solutions of the E(m)G(n)E(m) copolymers, this aim was achieved.     

Surfactant/nonionic copolymer interaction: a SLS, DLS, ITC, and NMR investigation

The interactions between an oxyphenylethylene-oxyethylene nonionic diblock copolymer with the anionic surfactant sodium dodecyl sulfate (SDS) have been studied in dilute aqueous solutions by static and dynamic light scattering (SLS and DLS, respectively), isothermal titration calorimetry (ITC), and 13C and self-diffusion nuclear magnetic resonance techniques. The studied copolymer, S20E67, where S denotes the hydrophobic styrene oxide unit and E the hydrophilic oxyethylene unit, forms micelles of 15.6 nm at 25 degrees C, whose core is formed by the styrene oxide chains surrounded by a water swollen polyoxyethylene corona. The S20E67/SDS system has been investigated at a copolymer concentration of 2.5 g dm(-3), for which the copolymer is fully micellized, and with varying surfactant concentration up to approximately 0.15 M. When SDS is added to the solution, two different types of complexes are observed at various surfactant concentrations. From SLS and DLS it can be seen that, at low SDS concentrations, a copolymer-rich surfactant mixed micelle or complex is formed after association of SDS molecules to block copolymer micelles. These interactions give rise to a strong decrease in both light scattering intensity and hydrodynamic radius of the mixed micelles, which has been ascribed to an effective reduction of the complex size, and also an effect arising from the increasing electrostatic repulsion of charged surfactant-copolymer micelles. At higher surfactant concentrations, the copolymer-rich surfactant micelles progressively are destroyed to give surfactant-rich-copolymer micelles, which would be formed by a surfactant micelle bound to one or very few copolymer unimers. ITC data seem to confirm the results of light scattering, showing the dehydration and rehydration processes accompanying the formation and subsequent destruction of the copolymer-rich surfactant mixed micelles. The extent of interaction between the copolymer and the surfactant is seen to involve as much as carbon 3 (C3) of the SDS molecule. Self-diffusion coefficients corroborated light scattering data.     

Preparation and solution behavior of a thermoresponsive diblock copolymer of poly(ethyl glycidyl ether) and poly(ethylene oxide)

A thermoresponsive diblock copolymer, poly(ethyl glycidyl ether)-block-poly(ethylene oxide) (PEGE-b-PEO), is synthesized by successive anionic ring-opening polymerization of ethyl glycidyl ether and ethylene oxide using 2-phenoxyethanol as a starting material, and its solution behavior is elucidated in water. In a dilute 1 wt % solution, the temperature-dependent alteration in the polymer hydrodynamic radius (RH) is measured in the temperature range between 5 and 45 degrees C by pulse-gradient spin-echo NMR and dynamic light scattering. The RH value increased with temperature in two steps, where the first step at 15 degrees C corresponds to the core-shell micelle formation and the second step at 40 degrees C corresponds to the aggregation of the core-shell micelles. The formation of the core-shell micelles is supported by the solubilization of a dye (1,6-diphenyl-1,3,5-hexatriene) in the hydrophobic core, which is recognized for a copolymer solution in the temperature range between 20 and 40 degrees C. In this temperature range, the core-shell micelles and the unimers coexist and the fraction of the former gradually increases with increasing temperature, suggesting equilibrium between the micelles and the unimers. In the concentrated regime (40 wt % solution), the solution forms a gel and the small-angle X-ray scattering measurements reveal the successive formation of hexagonal and lamellar liquid crystal phases with increasing temperature.     

Micelles and gels of mixed triblock copoly(oxyalkylene)s in aqueous solution

The micellization in dilute aqueous solution of a 50/50 wt% mixture of two triblock copolymers, E45B14E45 and E62P39E62, and the gelation of concentrated micellar solutions have been investigated over a range of temperatures. Here E, B, and P denote oxyethylene, oxubutylene, and oxypropylene chain units. Comparison is made with aqueous solutions of the individual copolymers. The results of light scattering measurements are consistent with effectively separate micellization of the two copolymers in the mixture. Hard gel formed when the extent of micellization was high for both copolymers. Because of the relatively high critical micellization temperatures of copolymer E62P39E62, the low-temperature boundary of the hard gel was high for this copolymer and for the mixture. The minimum concentration for hard-gel formation was higher for the mixture than for either of the individual copolymers, as would be expected for packing of two distributions of micelles of different average size.     

Dendrimer-influenced supramolecular structure formation of block copolymers

The water content-dependent supramolecular structure formation of polystyrene-block-poly(acrylic acid) (PS-b-PAA) copolymer in the presence of a fourth-generation amine-terminated poly(amido amine) dendrimer (PAMAM) is investigated by dynamic light scattering, turbidity measurements, and transmission electron microscopy. The solvent system for this study is a mixture of dioxane/THF and water. A very complex turbidity profile is observed with increasing water content in the system and is explained by the presence of various aggregated structures based on strong interactions between the amine-containing dendrimers and the poly(acrylic acid) blocks of the polymer. The onset of the self-assembly of single chains of PS-b-PAA (primary structure) into single and multiple dendrimer core inverse micelles (secondary structure) is detected as very low water contents of cw < 2% wt (cwc). These micelles consist of dendrimers coated with PAA blocks, which are connected to the corresponding PS chains that form the corona. Further addition of water leads to an association of these micelles into compound multiple dendrimer core inverse micelles (tertiary structure) in the range of cw = approximately 6 to approximately 10% wt. At still higher water content, some of the acrylic acid chains of the block copolymer move from the vicinity of the dendrimer to the outside of the aggregates, resulting in a decrease in the size of the formed structures and the acquisition of progressively increasing hydrophilic character of the aggregates. Multiple dendrimer core inverse onion micelles are formed, which agglomerate into compound multiple dendrimer core inverse onion micelles at cw = approximately 12 to approximately 18% wt. Above this water content, vesicular structures are formed. The complexity is unusual for block copolymer systems and illustrates the importance of strong interactions in structure formation.     

Temperature-induced reversible morphological changes of polystyrene-block-poly(ethylene oxide) micelles in solution

Temperature-induced reversible morphological changes of polystyrene-block-poly(ethylene oxide) micelles with degrees of polymerization of 962 for the PS and 227 for the PEO blocks (PS962-b-PEO227) in N,N-dimethylformamide (DMF)/water, in which water is a selective solvent for the PEO block, were observed. For a system with 0.2 wt % copolymer concentration and 4.5 wt % water concentration in DMF/water, the micelle morphology observed in transmission electron microscopy changed from vesicles at room temperature to worm-like cylinders and then to spheres with increasing temperature. Mixed morphologies were also formed in the intermediate temperature regions. Cooling the system back to room temperature regenerated the vesicle morphology, indicating that the morphological changes were reversible. No hysteresis was observed in the morphological changes during heating and cooling. Dynamic light scattering revealed that the hydrodynamic radius of the micelles decreased with increasing temperature. Combined static and dynamic light scattering results supported the change in morphology with temperature. The critical micellization temperatures and critical morphological transition temperatures were determined by turbidity measurements and were found to be dependent on the copolymer and water concentrations in the DMF/water system. The morphological changes were only possible if the water concentration in the DMF/water system was low, or else the mobility of the PS blocks would be severely restricted. The driving force for these morphological changes was understood to be mainly a reduction in the free energy of the corona and a minor reduction in the free energy of the interface. Morphological observations at different time periods of isothermal experiments indicated that in the pathway from one equilibrium morphology to another, large compound micelles formed as an intermediate or metastable stage.     

Micellisation and gelation of diblock copolymers of ethylene oxide and propylene oxide in aqueous solution, the effect of P-block length

The aqueous solution properties of five diblock copolymers prepared by sequential anionic copolymerisation (i.e. E₁₀₂P₃₇, E₁₀₄P₅₂, E₉₂P₅₅, E₁₀₄P₆₀ and E₉₈P₇₃ where E denotes oxyethylene and P denotes oxypropylene) were studied across a wide range of concentration. The techniques used to study micellisation and micellar properties in dilute solution were static and dynamic light scattering, surface tension, and eluent gel-permeation chromatography. The gelation of concentrated solutions was also investigated. As expected, the critical micelle concentration (CMC) was lowered and the association number of the micelles was increased by an increase in P-block length. In contrast, the critical gel concentration was unchanged, consistent with the constant E-block length leading to micelles with essentially identical E-block fringes. Comparison of the CMCs of the diblock copolymers with those of triblock E_mP_nE_m copolymers with the same P-block length shows the diblock copolymers to micellise more efficiently. A similar comparison of the CMCs of the diblock copolymers with those of E_mB_n copolymer (B denotes oxybutylene) shows the hydrophobicity of a P unit to be one-sixth that of a B unit. The possibility is explored of correlating the limiting association number of a spherical micelle with the hydrophobe block length of its constituent copolymer. Of the five copolymers, only dilute solutions of E₉₈P₇₃ were predominantly micellar at both room temperature and body temperature, and this copolymer must be a prime candidate in any consideration of the potential application of E_mP_n copolymers in the solubilisation and controlled release of drugs.     

Micellization and gelation of mixed copolymers P123 and F127 in aqueous solution

The micellization in dilute aqueous solution of Pluronic copolymers P123 (E21P67E21) and F127 (E98P67E98) and mixtures of the two was investigated using static and dynamic light scattering. Gelation of concentrated solutions of the two copolymers and their mixtures was studied using tube inversion and oscillatory rheometry. The two copolymers comicellized to give micelles with narrow size distributions. Clouding temperatures and critical micelle temperatures decreased as the proportion of P123 in the mixture was increased. Micelle association numbers of the mixed micelles lay between the values found for micelles of P123 and F127 alone, whereas micelle radii passed through maximum values in the range 0-50 wt % P123. As judged by the ratio of the thermodynamic to the hydrodynamic radius, the micelle interaction potential changes gradually from soft to hard as the proportion of P123 in the mixture is increased. Regions of cubic and hexagonal (birefringent) gel were defined for concentrated solutions. The high-temperature boundary of the 30 wt % cubic gel decreased monotonically from 90 to 43 degrees C as the proportion of P123 in the mixture was increased from 0 to 100 wt %, whereas the low-temperature boundary was essentially constant at 15 +/- 3 degrees C. Increasing the proportion of P123 in the mixture at 25 degrees C increased the concentration at which the cubic gel was first formed and decreased the concentration at which the hexagonal gel was first formed.     

Effect of the hydrophilic size on the structural phases of aqueous nonionic gemini surfactant solutions

Aggregate structures of aqueous nonionic Gemini surfactant solutions, alpha,alpha'-[2,4,7,9-tetramethyl-5-decyne-4,7-diyl]bis[omega-hydroxyl-polyoxyethylene] with three different length polyoxyethylenes (i.e., 10, 20, and 30 ethylene oxide monomers, denoted from now on as S-10, S-20, and S-30, respectively), are investigated using small angle neutron scattering, dynamic light scattering, and fluorescence spectroscopy. For S-10 at low surfactant concentrations (Cs < 0.9 wt %), large "clusters", with an average hydrodynamic radius (RH) > 40 nm, are found to coexist with monomers. At intermediate Cs (0.9 < Cs < 2 wt %), some clusters break down forming micelles, with an (RH) approximately 2-3 nm, while the remaining clusters coexist with micelles. Increasing Cs further (>2 wt %) results in a pure micellar phase with little or no clusters present. S-20 and S-30 mixtures, on the other hand, differ from S-10 in that irrespective of surfactant concentration, large clusters and small monomers/dimers are found to coexist, while there is no direct evidence for the presence of micelles.     

Organic spin clusters: annelated macrocyclic polyarylmethyl polyradicals and a polymer with very high spin S=6-18

Synthesis and magnetic studies of annelated macrocyclic polyradicals and a related high-spin polymer with macrocyclic repeat units are described. Polyarylmethyl polyether precursors to the polyradicals and the related polymer are prepared by using Negishi cross-coupling of difunctionalized calix[4]arene-based macrocycles. The three lowest homologues, with high degree of monodispersity, are tetradecaether (14-ether) 3-(OCH(3))(14), octacosaether (28-ether) 4-(OCH(3))(28), and dotetracontaether (42-ether) 5-(OCH(3))(42), in which 2, 4, and 6 calix[4]arene-based macrocycles are annelated to the center macrocycle, respectively. The evidence for their annelated structures (ladder connectivities) is based upon FAB-MS and the (1)H NMR based end-group analysis. The absolute masses (4-12 kDa) were determined by FAB-MS and GPC/MALS. Small angle neutron scattering (SANS) provides the radii of gyration of 1.7, 2.0, and 3.2 nm for 4-(OCH(3))(28), 5-(OCH(3))(42), and polymer 6-(OCH(3))(n), respectively. The corresponding polyarylmethyl polyradicals 3 and 4, and polymer 6 possess average values of S approximately 6-7, S approximately 10, and S approximately 18, respectively, as determined by SQUID magnetometry and numerical fits to linear combinations of Brillouin functions. The quantitative values of magnetization at saturation and of magnetic susceptibilities indicate that about 40-60 % of unpaired electrons are present at low temperatures (T=1.8-5 K). For polyradical 3, the variable temperature magnetic data are fit to the Heisenberg Hamiltonian based model. The variable magnetic field data at low temperatures are also fit to a percolation-based model for organic spin cluster, with random distribution of chemical defects, and ferromagnetic versus antiferromagnetic couplings, providing quantitative agreement between the experiment and the theory. For polyradical 3 (with S approximately 6-7), annealing at room temperature for 0.5 h leads to a polyradical with S approximately 5.     

Wormlike micelles of polyoxyethylene alkyl ether mixtures C10E5 + C14E5 and C14E5 + C14E7: hydrophobic and hydrophilic chain length dependence of the micellar characteristics

The wormlike micelles formed with the binary mixtures of surfactant polyoxyethylene alkyl ethers (CiEj), C10E5 + C14E5 (Mix1) and C14E5 + C14E7 (Mix2), were characterized by static (SLS) and dynamic light scattering (DLS) experiments. The SLS results have been analyzed with the aid of the light scattering theory for micelle solutions, thereby yielding the molar mass Mw(c) as a function of c along with the cross-sectional diameter d of the micelle. The observed Kc/DeltaR0 as a function of c, the mean-square radius of gyration (S2) and the hydrodynamic radius RH as functions of Mw have been well described by the theories for the wormlike spherocylinder model. It has been found that the micellar length increases with increasing concentration c or with raising temperature T irrespective of the composition of the surfactant mixtures. The length of the Mix1 and Mix2 micelles at fixed c and T steeply increases with increasing weight fraction wt of C14E5 in both of the surfactant mixtures, implying that the micelles greatly grow in length when the surfactant component with longer alkyl group or with shorter oxyethylene group increases in the mixture. The results are in line with the findings for the micelles of the single surfactant systems where the CiEj micelles grow in length to a greater extent for larger i and smaller j. Although the values of d and the spacing s between the adjacent surfactant molecules on the micellar surface do not significantly vary with composition of the surfactant mixture, the stiffness parameter lambda-1 remarkably decreases with wt in both Mix1 and Mix2 micelles, indicating that the stiffness of the micelle is controlled by the relative strength of the repulsive force due to the hydrophilic interactions between oxyethylene groups to the attractive one due to the hydrophobic interactions between alkyl groups among the surfactant molecules.     

Dynamic mechanical and rheological properties of binary S–(S/B)–S triblock copolymer blends

The rheology and dynamic mechanical properties of binary block copolymer blends consisting of a symmetrical triblock copolymer with thermoplastic elastomeric behavior (LN4) and an asymmetrical thermoplastic triblock copolymer (LN3) were investigated. TEM images of the blends show a systematic variation in the morphologies from worms (～20–0 wt % LN3) to cylinders (～60–30 wt % LN3) to lamellae (100–70 wt % LN3) as a function of LN3 content. DMA analysis has revealed that the increase in LN3 content leads to a decrease in miscibility between the PS end blocks and the S/B middle block. The frequency and temperature dependence of the storage modulus (G′), loss modulus (G″), and complex viscosity (|η*|) has been studied for LN4 (weakly segregated) and LN3 (strongly segregated) from their master curves. By comparing the rheological properties of these blend compositions at low‐frequency regime, it is observed that with the increase in LN3 content the shear modulus and complex viscosity increase. Blend compositions with 70–100 wt % of LN3 show nonterminal behavior at reduced frequencies due to the presence of highly ordered microdomains when compared to blends with ～0–20 wt % of LN3 content. van Gurp–Palmen plots were constructed to observe the transition from liquid‐ to solid‐like behavior in the vicinity of order‐to‐disorder transition (ODT) temperature. ODT temperature increases as the thermoplastic LN3 content increases which are also confirmed by the Han plots. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 329–343, 2008