固相萃取-衍生化-气相色谱法测定血液中的3种苯氧羧酸类除草剂

建立了一种血液中2,4-二氯苯氧乙酸(2,4-D)、2-(2,4-二氯苯氧)-丙酸(2,4-DP)和4-氯-2-甲基-苯氧乙酸(MCPA)3种苯氧羧酸类除草剂的分析方法.血样用0.1 mol/L盐酸稀释后用GDX401大孔树脂吸附、用乙醚洗脱,萃取物用二氯丙醇在硫酸催化下进行酯化衍生,衍生物经气相色谱-电子捕获检测.2,4-D、2,4-DP和MCPA的检测限分别为20,8和40 ng/mL.定量分析用2,4-二氯苯乙酸作内标,线性关系和回收率结果均令人满意.     

固相萃取-气质联用法检测植物叶中4种苯氧羧酸类除草剂

建立了葡萄、桃、山楂3种植物叶中2,4-滴(2,4-D)、2,4-滴丙酸(2,4-DP)、2甲4氯(MCPA)和2甲4氯丙酸(MCPP)4种苯氧羧酸类除草剂的分析方法.植物叶剪碎,加内标2,4-二氯苯乙酸,加甲醇浸泡,加酸性水溶液稀释浸泡液,分取稀释后上清液加GDX401大孔树脂吸附,吸附的除草剂和内标用乙醚洗脱,萃取物加H2SO4和正丁醇进行丁基酯衍生化,衍生物用气相色谱-选择离子监测质谱法分析.植物叶中4种除草剂的测量限都在20 ng/g以下,叶中除草剂含量在20～2000 ng/g范围内线性关系良好,叶中添加100 ng/g水平各种除草剂的平均回收率介于97.5%至101.3%之间,变异系数介于 5.8%至11.3%之间.方法快速、简便、灵敏度高,不仅可用于毁坏农田案件中植物叶中4种除草剂的检测,也可用于植物体中4种残留除草剂的检测.     

光响应性有机-无机杂化分子印迹聚合物的制备及表征

以4-硝基苯酚、 2,4-二氯苯氧乙酸和3-氯丙基三乙氧基硅烷为原料, 经氧化偶合、 酰化、 酯化反应合成了共价结合模板分子2,4-二氯苯氧乙酸(2,4-D)的光响应性含有机硅的偶氮苯功能单体, 通过溶胶-凝胶法制备了光响应性的有机-无机杂化分子印迹聚合物(OIHMIP). 研究了该分子印迹聚合物光响应性能、 对2,4-D的吸附性能和选择识别及光控释放与吸收能力, 用原子力显微镜对其形貌进行了表征. 结果表明, 制得的OIHMIP具有规则的球形, 粒径介于150～200 nm之间. OIHMIP对2,4-D具有良好的吸附和选择识别能力, 在365和440 nm的紫外-可见光交替照射下, 可控制2,4-D的释放与吸收.     

气相色谱-负化学源质谱法对水中2-甲-4-氯和2,4-滴的测定

建立了气相色谱-负化学源质谱法(GC-NCI MS)测定水中2-甲-4-氯(MCPA)和2,4-滴(2,4-D)2种酸性除草剂的分析方法.水样经过Oasis HLB柱萃取后,进行五氟苄基溴(PFBBr)衍生化,用2,4-二氯苯乙酸(2,4-DCPA)作内标进行定量分析,并以2-甲-4-氯丙酸(mecoprop)作回收率指示物对整个分析过程进行监控,以保证分析结果的准确性.mecoprop、MCPA和2,4-D在5、100、200 ng/L 3个不同添加水平下的回收率在82% ～135%范围内,RSD在1.3% ～9.3%范围内,在1 ～200 μg/L线性范围内,相关系数r大于0.997,MCPA、2,4-D的方法检出限分别为0.60、0.45 ng/L.2007年11月采用GC-NCI MS方法对南方地区某河流中的MCPA和2,4-D含量进行调查,其质量浓度分别不大于19.4 ng/L和6.2 ng/L,监测结果表明,该河流水质没有受到MCPA和2,4-D酸性除草剂的污染.     

特丁二甲硅烷基衍生化气相色谱-质谱法检测尿中4种苯氧羧酸类除草剂

建立了尿中2,4-滴(2,4-D)、2,4-滴丙酸(2,4-DP)2、甲4氯(MCPA)和2甲4氯丙酸(MCPP)4种苯氧羧酸类除草剂的气相色谱-质谱(GC-MS)分析方法。尿样加氯化钠饱和,酸化后用乙醚萃取,萃取物进行特丁二甲硅烷基(TBDMS)衍生化后分析。尿中4种除草剂的浓度在3~3 000 ng/mL范围内工作曲线的线性关系良好,检出限在1 ng/mL以下,3、100和1 000 ng/mL水平加标回收率在97.0%~102.2%之间,精密度在6.2%~14.2%之间。该法灵敏,可用于中毒者和职业接触者尿中苯氧羧酸类除草剂的分析。     

1,3,5-三硝基苯在高岭石表面吸附的理论研究

构造了高岭石硅氧层和铝氧层的团簇模型(分别为Si₁₃O₃₇H₂₂和Al₆O₂₄H₃₀), 并分别在B3LYP/6-31G(d), MP2/6-31G(d)//B3LYP/6-31G(d)和B3LYP/6-311++G(d,p)//B3LYP/6-31G(d)理论水平上对1,3,5-三硝基苯(TNB)在高岭石表面的吸附性质(如优化的几何构型、 结构参数、 吸附能、 振动频率、 静电势和分子轨道等)进行了研究. 结果表明, TNB和硅氧层表面间的相互作用以静电和范德华相互作用为主; TNB与铝氧层间的相互作用以氢键为主, 且TNB和铝氧层间相互作用的能量更低, 结构更稳定.     

聚丙烯酰胺树脂的制备及其对2,4-二氯苯氧乙酸的吸附性能研究

以氯甲基化交联聚苯乙烯树脂(CMCPS)为载体和大分子引发剂,溴化亚铜/2,2’-联吡啶为催化剂体系,采用了表面引发原子转移自由基聚合技术(SI-ATRP),将丙烯酰胺接枝到CMCPS树脂表面,制得了新型聚丙烯酰胺树脂(PAM-CMCPS),并且用元素分析、扫描电镜和红外光谱对其进行了表征。考察了此树脂对2,4-二氯苯氧乙酸的吸附性能、动力学和热力学参数。结果表明,此树脂对2,4-二氯苯氧乙酸的吸附量随溶液初始浓度和温度的升高而增加,当初始浓度为8 mmol/L时吸附效果最佳,树脂的静态饱和吸附容量为111.0 mg/g,Langmuir和Freundlich方程都呈现良好的拟合度。热力学平衡方程计算得ΔG<0,ΔH=268.2 k J/mol,ΔS>0,表明此吸附过程是一个自发、吸热、熵增加的过程。动力学研究表明,准二级动力学方程能较好拟合动力学实验结果,该过程符合准二级动力学模型。此PAM-CMCPS树脂应用于柑橘样品中2,4-二氯苯氧乙酸的吸附,取得了较满意的结果。     

中空纤维三相液相微萃取-高效液相色谱法测定环境水样中7种苯氧羧酸类除草剂

建立了利用中空纤维三相液相微萃取-高效液相色谱联用技术(HF-LPME-HPLC)同时测定环境水中痕量麦草畏(dicamba)、氟草烟(fluroxypyr)、4-氯苯氧乙酸(4-CPA)、2甲4氯(MCPA)、2,4-滴(2,4-D)、2,4-滴苯氧丁酸(2,4-DB)和2甲4氯苯氧丁酸(MCPB)等7种苯氧羧酸类除草剂的分析方法。考察了萃取剂﹑接受相和给出相pH值、萃取时间﹑搅拌速度和盐效应等对检测的影响,通过正交试验优化萃取条件,得到的最佳萃取条件为正辛醇作萃取剂,给出相pH为3,接受相pH为12,萃取30 min,搅拌速度400 r/min。结果表明7种除草剂在较宽的线性范围内线性良好,相关系数为0.9953～0.9988,检出限(信噪比为3)为0.2～1.0 μg/L,富集倍数为76.7～121,加标回收率为68%～104%,相对标准偏差为3.2%～8.1%。该法灵敏度高、操作简单、检测快速、有机溶剂消耗少,为环境水样中痕量苯氧羧酸类除草剂残留的分析提供了有益的参考。     

基于电聚合作用的脂质体免疫传感器检测血液中2,4-二氯苯氧乙酸

利用旋蒸法和挤压法制备脂质体,通过脂质体包埋亚铁氰化钾,利用戊二醛交联2,4-二氯苯氧乙酸(2,4-D)兔抗制成免疫脂质体,制备快速检测血液中2,4-D的夹心型免疫传感器.实验结果表明:2,4-D在75 ng/mL～50 μg/mL浓度范围内呈现良好的线性关系,检测下限达到了36.42 ng/mL.该免疫传感器选择性强...     

除草剂2-甲基-4-氯苯氧乙酸(MCPA)与~·OH自由基的气相化学反应

采用长光程气体池结合傅里叶变换红外光谱仪测得了除草剂2-甲基-4-氯苯氧乙酸(MCPA)与.OH自由基在23℃时的反应速率常数为2.67×10-11cm3/(s.mol),以此估算了在大气中.OH自由基浓度为7×105mol/cm3时,MCPA与.OH自由基反应导致的大气寿命为14.9 h.结果表明,在大气环境中MCPA较容易降解,不会通过大气输送对环境造成广泛和持久性污染.     

Thermal decomposition study on mixed ligand thymine complexes of divalent nickel(II) with dianions of some dicarboxylic acids

Thermal decomposition of mixed ligand thymine (2,4-dihydroxy-5-methylpyrimidine) complexes of divalent Ni(II) with aspartate, glutamate and ADA (N-2-acetamido)iminodiacetate dianions was monitored by TG, DTG and DTA analysis in static atmosphere of air. The decomposition course and steps of complexes [Ni(C₅H₆N₂O₂)(C₄H₅NO₄)²⁻(H₂O)₂]·H₂O, [Ni(C₅H₆N₂O₂)(C₅H₇NO₄)²⁻(H₂O)₂]·H₂O and [Ni(C₅H₆N₂O₂)(C₆H₈N₂O₅)²⁻(H₂O)₂]·1.5H₂O were analyzed. The final decomposition products are found to be the corresponding metal oxides. The kinetic parameters namely, activation energy (E*), enthalpy (ΔH*), entropy (ΔS*) and free energy change of decomposition (ΔG*) are calculated from the TG curves using Coats–Redfern and Horowitz–Metzger equations. The stability order found for these complexes follows the trend aspartate > ADA > glutamate.     

Preparative and spectral investigations on C3 bonded acetylacetonates of tellurium(IV)

In the reaction of 3,3-bis(chloromercury)-2,4-pentanedione with TeCl₄, Ph₂TeCl₂, or Ph₃TeCl, the replacement of one HgCl group by a tellurium moiety gives Cl₃Te(C₅H₆O₂)HgCl·2C₄H₈O₂ (I), Ph₂Te(Cl)(C₅H₆O₂)HgCl (II) and Ph₃Te(C₅H₆O₂)HgCl (III), respectively. The IR and ¹H NMR data indicate that the Te is bonded to the C₃ carbon of acetylacetone. In solution the compounds appear to ionize into Cl⁻ and an organometallic cation in which Hg seems to be involved in secondary interaction with the carbonyl groups; far IR and mass spectral data suggest that Hg---O interaction is significant even in solid state.     

Multi-component Hydrogen-bonding Organic Salts Formed from 1-Methylpiperazine with Aromatic Carboxylic Acids: Synthons Cooperation and Crystal Structures

1-Methylpiperazine was employed to crystallize with 2,4-dihydroxybenzoic acid and 1,8-naphthalene acid, affording two multi-component hydrogen-bonding salts [(C₅H₁₄N₂)²⁺·(C₇H₅O₄)_2-·H₂O](1) and [(C₅H₁₄N₂)²⁺(C₁₂H₆O₄)²ˉ·2H₂O](2). These two forms of salts are both monoclinic systems with space group P2₁/c(14). The lattice parameters of salts 1 and 2 are a=1.32666(10) nm, b=0.90527(7) nm, c=1.67107(13) nm, β=103.125(1)° and a=1.4950(2) nm, b=0.75242(15) nm, c=1.6563(3) nm, β=92.834(2)°, respectively. Expected classical hydrogen bonds N―H…O and O―H…O appear in the chargetransfer salts, and asymmetric units of these two forms both contain water molecules which play a significant role in building novel supramolecular architectures. Robust hydrogen-bond interactions between 1-methylpiperazine and aromatic acid provide sufficient driving force to direct the two crystals to three-dimensional structures. Weak interactions C―H…O emerging in salts 1 and 2 further enhance their crystal structures. As a consequence, hydrogen-bonding interactions in these compounds afford diverse 3D net supramolecular architectures. Thermal stability of these compounds was investigated by thermogravimetric analysis(TGA).     

Novel liquid-crystalline derivatives of transition metals. The effect of the molecular geometry of the ligands on the mesogenic properties of tetracoordinated copper(II) complexes

The synthesis, characterization and thermal behaviour of several new series of copper(II) complexes derived from carbonylic compounds and their Schiff's bases are reported. The complexes are of two types; [Cu(C₆H₃O(R)-C(X) = O)₂], (type I) and [Cu(C₆H₃O(R)-C(X) = N-R')₂] (type II) where R = - OOC-C₆H₄OC₁₀H₂₁-p, and the position of R is 4 or 5; R' = CH₃, n-C₁₀H₂₁, p-n-C₁₀H₂₁O(C₆H₄)-; X = H, CH₃. In type I complexes, only the compound with X = H and R in position 5 showed mesomorphism. For type II complexes, all the Schiff's bases complexes of copper(II) derived from 2,4-dihydroxybenzaldehyde showed thermotropic mesophases (smectic C and nematic), whereas the complexes derived from 2,5-dihydroxybenzaldehyde were only mesogenic when the imine was derived from methylamine. None of the complexes derived from the ketone (2,4 or 2,5-dihydroxy derivatives) showed liquid-crystalline properties. X-ray studies of four complexes of type II were carried out. The anisotropy of the magnetic susceptibility has a negative sign for complexes with R in position 4 and a positive sign for 2,5-derivative complexes. The relationship between molecular structure and mesomorphic behaviour is discussed.     

Pr掺杂对V2O5-MoO3/TiO2催化剂NH3-SCR反应活性的影响

采用溶胶-凝胶法制备了不同Pr掺杂量的Pr₆O₁₁-TiO₂载体, 并以浸渍法制备了V₂O₅-MoO₃/Pr₆O₁₁-TiO₂催化剂. 活性评价结果表明, 该催化剂在220~400 ℃范围内具有良好的脱硝效率和N₂选择性以及较强的抗SO₂和H₂O性能. 表征结果表明, 掺杂Pr可以提高V₂O₅-MoO₃/TiO₂催化剂的比表面积、 表面化学吸附氧物种浓度、 桥式硝酸盐物种和Brönsted酸位数量, 从而提高了催化剂上NO_x的选择性催化还原(NH₃-SCR)活性.     

Isotope dilution high-resolution gas chromatography/high-resolution mass spectrometry method for analysis of selected acidic herbicides in surface water

In this work, an isotope dilution method for determination of selected acidic herbicides by high-resolution gas chromatography/high-resolution mass spectrometry (HRGC/HRMS) was developed for surface water samples. Average percent recoveries of native analytes were observed to be between 70.8 and 93.5% and average recoveries of labeled quantification standards [(13)C(6)]2,4-D and [(13)C(6)]2,4,5-T were 85.5 and 101%, respectively. Using this method, detection limits of 0.05 ng/L for dicamba, MCPA, MCPP, and triclopyr, and 0.5 ng/L for 2,4-D were routinely achieved. The method was applied to measuring the concentration of these analytes in surface water samples collected from five sampling locations in the Lower Fraser Valley region of British Columbia, Canada. All of the herbicides monitored were detected at varying levels in the surface water samples collected. The highest concentrations detected for each analyte were 345 ng/L for 2,4-D, 317 ng/L for MCPA, 271 ng/L for MCPP, 15.7 ng/L for dicamba, and 2.18 ng/L for triclopyr. Average detection frequencies of the herbicides were 95% for MCPA, 80% for MCPP, 70% for dicamba, 65% for 2,4-D, and 46% for triclopyr. Seasonal variations of herbicide levels are also discussed.     

Mo/Fe3O4(111)表面对燃煤烟气汞吸附的密度泛函研究

利用CASTEP软件包采用密度泛函理论计算研究了过渡金属Mo掺杂Fe_3O_4(111)Fe_(tet)表面对Hg~0、HgCl和HgCl_2的吸附特征,分析了Mo掺杂前后Fe_3O_4(111)Fe_(tet)表面上不同汞物种的吸附形态。结果表明,Mo掺杂Fe_3O_4(111)Fe_(tet)表面对HgCl和HgCl_2为化学吸附,而对Hg~0的吸附为物理吸附;与纯净表面相比,HgCl在Mo原子掺杂表面上的吸附能提高了40%-66%。HgCl_2在纯净Fe_3O_4(111)Fe_(tet)表面形成"M"形结构;而掺杂Mo原子后,由于Cl原子与Mo原子之间更强的相互作用,使得HgCl_2发生了完全解离,两个Cl原子分别与Mo原子和Fe原子成键吸附在表面,Hg脱附。相关研究结果可为脱除燃煤烟气中的汞提供一定的理论指导。     

Macrocyclic gold(I) complexes and [2]catenanes containing carbonyl functionalized diacetylide ligands

The carbonyl derivatized bis(alkyne) O=C(4-C₆H₄OCH₂CCH)₂ was converted into the imine derivatives RN=C(4-C₆H₄OCH₂CCH)₂ [R=OH, NHC(O)NH₂, NHC₆H₃-2,4-(NO₂)₂] and into the 4-bromomethyl-1,3-dioxolane derivative BrCH₂C₂H₃O₂C(4-C₆H₄OCH₂CCH)₂. The alkyne units in these compounds react with [AuCl(SMe₂)] in the presence of base to form the corresponding digold(I) diacetylide complexes, that exist as insoluble oligomers or polymers. They reacted with the diphosphines Ph₂PZPPh₂ [Z=CC, trans-HC=CH and (CH₂)_n, n=3–5] to give macrocyclic gold(I) complexes of the type [Au₂(μ-LL)(μ-PP)], where LL is the diacetylide and PP the diphosphine ligand. The ability of these macrocyclic complexes to self-assemble to [2]catenanes has been studied. The ketone and imine derivatives do not form [2]catenanes because the orientation of the aryl groups is unfavorable, but the 1,3-dioxolane derivatives may catenate if the ring size is optimum.     

The reaction of cis dioxobis(2,4 pentanedionato)molybdenum (VI) and 2,2′ pyridylbenzoxazole (L), a novel route to β[Mo8O26]

MoO₂(C₅H₇O₂)₂, where C₅H₇O₂ is 2,4-pentanedione (acac), reacts with 2-2′ pyridylbenzoxazole in acetone to give a product with stoichiometry, Mo₃C₂₄H₁₆N₆O₁₂. This product dissolves readily in dimethylformamide to give a brown solution which on standing for several weeks yielded crystals. An X-ray structure determination showed these crystals to contain uncoordinated 2-2′pyridylbenzoxazole and [(CH₃)₂NH₂]₄⁺[Mo₈O₂₆]⁴⁻.