Oxidation of metallic iron with oxygen via mechanochemical activation

The X-ray phase analysis and X-ray diffraction, as well as IR and Mössbauer spectroscopic techniques were employed to study mechanochemical oxidation of iron metal powder with oxygen. The phase composition of the products of mechanochemical activation of iron in a vibrating mill was determined. The extent of oxidation of iron was examined in relation to the particle-size distribution of the starting iron powder.     

Dissolution of iron oxide nanoparticles inside polymer nanocapsules

The structure of poly(organosiloxane) nanocapsules partially filled with iron oxide cores of different sizes was revealed by small angle X-ray scattering and X-ray diffraction. The nanocapsules are synthesized by the formation of a poly(organosiloxane) shell around iron oxide nanoparticles and the simultaneous partial dissolution of these cores. Due to the high scattering contrast of the iron oxide cores compared to the polymer shell, the particle size distribution of the cores inside the capsules can be measured by small angle X-ray scattering. Additional information can be revealed by X-ray diffraction, which gives insights into the formation of the polymer network and the structure of the iron oxide cores. The study shows how the crystallinity and size of the nanoparticles as well as the shape and width of the size distribution can be altered by the synthesis parameters.     

Effect of iron nanoparticles in the films of composite materials and carbon nanotubes on the angular dependence of X-ray emission

The angular dependences of X-ray emission were measured for a series of polymer film samples with different concentration of finely dispersed iron. X-ray fluorescence maximum was found to shift toward higher angles with increasing the iron concentration in a sample. The form of angular dependences of X-ray emission was calculated taking into account the particle absorption coefficients in a composite material for incident and emitted radiation. The experimental and theoretical dependences were compared to estimate the content of nanoparticles in the polymer composite and iron nanoparticles in the samples of oriented carbon nanotubes.     

Ribbed-monofunctionalized iron(II) clathrochelate with tert-butyl sulfide substituents: Synthesis,structure, and thermochemical transformations

A ribbed-monofunctionalized macrobicyclic iron(II) complex with tert-butyl sulfide substituents has been prepared via nucleophilic substitution of its dichloroclathrochelate precursor with tert-butylthiolate ion. This new complex has been characterized using elemental analysis, IR and multinuclear NMR spectroscopy, and the single crystal X-ray diffraction. Its thermal destruction occurs with release of isobutylene and polyunsaturated hydrocarbons giving iron borate, iron fluoropolyborate, and iron nitride as follows from combined thermal analysis and X-ray powder diffraction data.     

Characterization of zero-valent iron nanoparticles

The iron nanoparticle technology has received considerable attention for its potential applications in groundwater treatment and site remediation. Recent studies have demonstrated the efficacy of zero-valent iron nanoparticles for the transformation of halogenated organic contaminants and heavy metals. In this work, we present a systematic characterization of the iron nanoparticles prepared with the method of ferric iron reduction by sodium borohydride. Particle size, size distribution and surface composition were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), high-resolution X-ray photoelectron spectroscopy (HR-XPS), X-ray absorption near edge structure (XANES) and acoustic/electroacoustic spectrometry. BET surface area, zeta (ζ) potential, iso-electric point (IEP), solution Eh and pH were also measured. Methods and results presented may foster better understanding, facilitate information exchange, and contribute to further research and development of iron nanoparticles for environmental and other applications.     

Synthesis, characterization, and surface properties of iron-doped boehmite nanofibers

Iron-doped boehmite nanofibers with varying iron contents have been prepared at low temperatures using hydrothermal treatment in the presence of poly(ethylene oxide) surfactant. The resulting nanofibers were characterized by transmission electron microscopy (TEM), X-ray diffraction, energy-dispersive X-ray analysis, and N2 adsorption. TEM images showed that the resulting nanostructures are predominantly nanofibers when the doped iron content is less than 5% (mol/mol); in contrast, nanosheets were formed when iron doping was above 4%. Nanotubes instead of nanofibers and iron-rich particles were observed in samples with 20% added iron. A detailed characterization and discussion on the iron-doped nanofibers is presented.     

Toluene and naphthalene sorption by iron oxide/clay composites

Commercial bentonite (BFN) and organoclay (WS35), as well as iron oxide/clay composite (Mag_BFN) and iron/oxide organoclay composite (Mag_S35) were prepared for toluene and naphthalene sorption. Mag_BFN and Mag_S35 were obtained, respectively, by the precipitation of iron oxide hydrates onto sodium BFN and S35 clay particles. The materials were characterized by powder X-ray diffraction (XRD), X-ray Fluorescence (XRF), and TG and DTA. From XRF results and TG data on calcined mass basis, a quantitative method was developed to estimate the iron compound contents of the composites, as well as the organic matter content present in WS35 and Mag_S35.     

煤裂解过程中负载铁化学形态的变化

应用ＥＸＡＦＳ、ＸＡＮＥＳ和ＸＲＤ方法研究了褐煤中负载铁在裂解过程中化学形态的变化规律。结果表明，在载ＦｅＣｌ３．６Ｈ２Ｏ煤中，铁与煤表面碳－氧官能团发生强烈的相互作用。随热处理温度的升高，铁化学形态以如下顺序递变：高分散Ｆｅ－Ｏ／Ｃ络合物，超细ＦｅＯＯＨ，晶态Ｆｅ３Ｏ４，晶还原态铁（α－Ｆｅ，（Ｆｅ，Ｃ））《     

Comparative structural and chemical studies of ferritin cores with gradual removal of their iron contents

Transmission Electron Microscopy (TEM), X-ray Absorption Near Edge Spectroscopy (XANES), Electron Energy-Loss Spectroscopy (EELS), Small-Angle X-ray Scattering (SAXS), and SQUID magnetic studies were performed in a batch of horse spleen ferritins from which iron had been gradually removed, yielding samples containing 2200, 1200, 500, and 200 iron atoms. Taken together, findings obtained demonstrate that the ferritin iron core consists of a polyphasic structure (ferrihydrite, magnetite, hematite) and that the proportion of phases is modified by iron removal. Thus, the relative amount of magnetite in ferritin containing 2200 to 200 iron atoms rose steadily from approximately 20% to approximately 70% whereas the percentage of ferrihydrite fell from approximately 60% to approximately 20%. These results indicate a ferrihydrite-magnetite core-shell structure. It was also found that the magnetite in the ferritin iron core is not a source of free toxic ferrous iron, as previously believed. Therefore, the presence of magnetite in the ferritin cores of patients with Alzheimer's disease is not a cause of their increased brain iron(II) concentration.     

铁和铈共掺杂二氧化钛中的协同效应

The co-doping of iron and cerium into TiO2 was studied by means of X-ray diffraction, Raman spectroscopy, UV-Vis diffuse reflectance spectroscopy and X-ray photoelectron spectroscopy. when separately doping via the sol-gel method, iron was introduced in the framework of anatase TiO2 whereas cerium was not; interestingly, both iron and cerium were introduced in the framework when co-doping by the sol-gel method. The co-doped TiO2 behaves much more intense surface hydroxyl concentration than the separately-doped and pure TiO2. This observation demonstrates for the first time a cooperative effect in the co-doping of transitional metals in the framework of TiO2.     

The effect of the starting material on the thermal decomposition of iron oxyhydroxides

The effect of the iron precursor on the thermal decomposition of iron oxyhydroxides was studied by DSC, DTA and TG in this work. Samples were prepared from iron nitrate, iron sulfate and iron chloride and the thermal curves obtained were analyzed by specific area measurements, X-ray diffraction and Mössbauer spectroscopy. It was found that the iron oxyhydroxide precursors affect the temperatures of the hematite formation as well as the textural properties of the final hematite producing particles with different diameters as following: iron sulfate (3.3 nm)相似文献   

Precursor effect on the property and catalytic behavior of Fe-TS-1 in butadiene epoxidation

The effect of iron precursor on the property and catalytic behavior of iron modified titanium silicalite molecular sieve (Fe-TS-1) catalysts in butadiene selective epoxidation has been studied. Three Fe-TS-1 catalysts were prepared, using iron nitrate, iron chloride and iron sulfate as precursors, which played an important role in adjusting the textural properties and chemical states of TS-1. Of the prepared Fe-TS-1 catalysts, those modified by iron nitrate (FN-TS-1) exhibited a significant enhanced performance in butadiene selective epoxidation compared to those derived from iron sulfate (FS-TS-1) or iron chloride (FC-TS-1) precursors. To obtain a deep understanding of their structure-performance relationship, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Temperature programmed desorption of NH₃ (NH₃-TPD), Diffuse reflectance UV–Vis spectra (DR UV–Vis), Fourier transformed infrared spectra (FT-IR) and thermal gravimetric analysis (TGA) were conducted to characterize Fe-TS-1 catalysts. Experimental results indicated that textural structures and acid sites of modified catalysts as well as the type of Fe species influenced by the precursors were all responsible for the activity and product distribution.     

Iron oxide nanoparticles within the pore system of mesoporous SBA-15 in different acidity: the synthesis and characterization

Direct hydrothermal method is employed for incorporating iron into the pore structure of SBA-15. The resultant materials were analyzed by X-ray diffraction (XRD) patterns, N₂ sorption isotherm and X-ray photoelectron spectroscopy (XPS). The characterizations of XRD patterns and XPS revealed that iron nanoparticles were present as highly dispersed nanoclusters in the well-ordered mesoporous channels of SBA-15. The characterizations of t-plot reveal only microporous channels of SBA-15 are confirmed to be filled with iron nanoparticles, leaving the mesopores unaffected. The supported material still maintained its ordered mesoporous structure similar to SBA-15 and possessed high surface area, large pore volume and uniform pore size.     

Changes of iron concentrations in skin and plasma of patients with hemochromatosis along therapy

Skin as a manageable organ can provide direct or indirect information of tissue iron overload resulting from inherited disorders as hemochromatosis. Patients with hemochromatosis were evaluated at three consecutive phases along the therapy programme. Nuclear microprobe techniques were used to assess skin iron and Total Reflection X-ray Fluorescence to determine the plasma iron concentrations. Results showed that iron pools were differently correlated at the three therapy phases. These variations highlighted the value of skin iron content to assess organ iron deposition and therapy efficacy. Skin iron content can be used for a better management of patients with iron overload pathologies.     

Study of the copper effect in iron-gall inks after artificial ageing

Iron-gall inks consist of a mixture of vitriols (sulphates of certain metals), gall nut extracts and arabic gum. The association of the iron(II) sulphate present in vitriols, and the gallic acids present in the gall nut extracts induces, after exposure to oxygen, the formation of dark coloured compounds of ink. In addition to iron, this kind of inks contains other metals, such as copper, zinc, and nickel. Among them, copper could be considered the most important because, owing to its catalytic ability, it can be involved in the processes concerning formation and stability of iron complexes, which are responsible for the ink dark colour. For this purpose, four different iron-gall inks containing increasing amounts of copper sulphate were prepared according to a traditional receipt and applied on paper supports. The ink-stained paper specimens were subjected to an intense analytical program to investigate their chemical and physical modifications after artificial ageing (both temperature/humidity and ultraviolet light ageing). The role of copper in the iron-gall inks was evaluated using optical microscopy, colorimetric measurements, X-ray fluorescence (XRF), X-ray diffraction analysis (XRD), scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM–EDX) and Fourier transform infrared spectroscopy (FTIR). For the evaluation of the oxidation state of iron and copper, X-ray absorption spectroscopy (XANES) was used. All results indicate that the presence of copper in iron-gall ink causes colour variation, affects the migratory behaviour of iron in the paper, increases the formation of secondary products particularly when ageing process based on temperature/humidity variations is considered.     

黑色微弧氧化膜的制备及其表征

利用二次微弧氧化法,通过在磷酸盐体系的电解液中添加柠檬酸铁,在AZ40M镁合金基底表面成功制备了黑色的微弧氧化膜层。并利用扫描电子显微镜（SEM）、能谱仪（EDS）、X射线衍射（XRD）和X射线光电子能谱（XPS）分别对黑色膜层的形貌和成分组成进行了表征,探讨了黑色微弧氧化膜层的形成过程及机理。结果显示,黑色膜层的主要成分为氧化镁,同时伴随着一定量的铁氧化物,包括四氧化三铁、氧化亚铁和单质铁。因此镁基底表面黑色膜层的形成可归因于柠檬酸铁中的铁离子在成膜过程中参与反应形成了黑色的四氧化三铁、氧化亚铁和单质铁混合物,并均匀地沉积在氧化膜中。     

Amorphous iron-(hydr) oxide networks at liquid/vapor interfaces: In situ X-ray scattering and spectroscopy studies

Surface sensitive X-ray reflectivity (XR), fluorescence (XF), and grazing incidence X-ray diffraction (GIXD) experiments were conducted to determine the accumulation of ferric iron Fe (III) or ferrous iron Fe (II) under dihexadecyl phosphate (DHDP) or arachidic acid (AA) Langmuir monolayers at liquid/vapor interfaces. Analysis of the X-ray reflectivity and fluorescence data of monolayers on the aqueous subphases containing FeCl(3) indicates remarkably high levels of surface-bound Fe (III) in number of Fe(3+) ions per molecule (DHDP or AA) that exceed the amount necessary to neutralize a hypothetically completely deprotonated monolayer (DHDP or AA). These results suggest that nano-scale iron (hydr) oxide complexes (oxides, hydroxides or oxyhydroxides) bind to the headgroups and effectively overcompensate the maximum possible charges at the interface. The lack of evidence of in-plane ordering in GIXD measurements and strong effects on the surface-pressure versus molecular area isotherms indicate that an amorphous network of iron (hydr) oxide complexes contiguous to the headgroups is formed. Similar experiments with FeCl(2) generally resulted with the oxidation of Fe (II)-Fe (III) which consequently leads to ferric Fe (III) complexes binding albeit with less iron at the interface. Controlling the oxidation of Fe (II) changes the nature and amount of binding significantly. The implications to biomineralization of iron (hydr) oxides are briefly discussed.     

Study of foxing stains on paper by chemical methods,infrared spectroscopy,micro-X-ray fluorescence spectrometry and laser induced breakdown spectroscopy

Foxing spots appear on the paper as stains of reddish-brown, brown or yellowish color, generally of small dimensions, with sharp or irregular edges, most of which, if excited with UV light, show fluorescence. The formation mechanisms of foxed areas have been studied since 1935, however, despite more recent intensive research there are still no conclusive results. Some authors found evidence of bacterial or fungal growth in some foxed areas sometimes associated with the presence of iron. We decided to focus our attention on the influence of the different iron valence in the formation of stains in the paper. For this reason we artificially induced the formation of foxing by adding to the paper small, known quantities of iron (III) and iron (II) ions. We prepared aqueous solutions of ferric chloride and ferrous sulfate at three different concentrations and we always used the same quantity of each solution (5 μl) to obtain a foxing stain. Part of the paper samples was artificially aged in a climatic chamber at 80 °C, 65% relative humidity for 15 days and part was submitted to aging for the same period at ambient temperatures under UV light at 240 nm. All papers were then analyzed for stain diameter, chromaticity coordinates, fluorescence under UV illumination, water content in the paper and in the spots, carbonyl content and then examined with infrared spectroscopy, X-ray fluorescence spectrometry and laser induced breakdown spectroscopy. Infrared spectra were collected in transmittance from potassium bromide pellets or directly in reflectance under microscope; X-ray fluorescence analysis were carried out using an X-ray microbeam (350 μm beam spot; W X-ray tube) and LIBS analysis with Nd:YAG laser coupled with a Czerny-Turner spectrometer. As a result it is stated that the foxing phenomenon is related to a strong oxidation of the cellulose chain. Concerning the color coordinates there are no great differences between samples treated with iron (III) and iron (II). Carbonyl content, on the contrary, varies for the two sets of samples, especially in relation with the kind of aging. μ-XRF and LIBS measurements show a relationship between iron valence and calcium ion displacement in the foxed areas.     

Production of iron phosphide by reduction of polyphosphates with metallic iron

A composition of the products of interaction in the system (NaPO₃)₃-Fe under heating was studied by X-ray analysis and calculation of ΔG _T ^○ . Possible pathways of the formation of iron phosphides of different chemical composition and other co-products during heating of sodium and iron cyclotriphophate to 1000°C were described on the basis of thermodynamic and X-ray data. The conditions for obtaining individual types of iron phosphides Fe₃P, Fe₂P, and FeP by interaction of sodium cyclotriphophate with metallic iron under heating were found.     

CO/H_2合成混合醇Cu-Co-Fe催化剂的组成和铁的分散行为(英文)

Cu-Co-Fe catalysts were prepared by coprecipitation of Cu-Co nitrate solutions with Na2CO3 and impregnation of iron nitrate on the Cu-Co precipitates by incipient wetness method; and their phase structure, composition and iron dispersion behavior were studied by XRD, SEM and SAM techniques. The catalyst precursor consists of CuO, Co3O4 and (-Fe2O3. The intensity of XRD peak of Fe2O3 changes as the relative content of iron varies. No X-ray diffraction peak of iron oxide appears unless the content of iron surpasses a threshold value.