Structure and optoelectronic properties of PbSe quantum dots /PVA. Does the polymer molecular weight matter?

Polyvinyl alcohol (PVA) with different molecular weights (8000, 14,000, and 132,000 g/mol) capped lead selenide (PbSe) quantum dots (QDs) are prepared. The nanocomposites are characterized by X‐ray diffraction (XRD) and transmission electron microscopy (TEM). XRD and TEM studies show that the particle size of PbSe QDs decrease with the increase in PVA molecular weight and/or PVA amount. This may be due to the increase in molecular weight inhibiting further growth of PbSe into the polymer matrix. Thermogravimetric analysis showed that the introduction of PbSe QDs into PVA decreases the crystallinity of the polymer. The optical absorption spectroscopy of prepared nanocomposites showed that the absorption peaks are strongly shifted to the lower wavelength (blue shift) from near infrared region to visible region by increasing the PVA molecular weight. The (I–V) characteristic curves of the PVA/PbSe nanocomposite films under illumination showed a photovoltaic cell‐like behavior. The results indicated that as the molecular weight of polymer increases, the conversion efficiency increases. Copyright © 2010 John Wiley & Sons, Ltd.     

Fracture of polymer interfaces: what are the relevant length scales?

While it is tempting to relate directly the molecular structure of an interface (between glassy or between semi‐cristalline polymers) with its fracture toughness, these two parameters are simply the two end‐points of a complex network which needs to be understood in order to control the mechanical strength of the interface. The important mechanisms occur at three different length scales: the molecular scale (stress‐transfer across the interface), the microscopic scale (plastic deformation at the crack tip) and the macroscopic scale (loading geometry and elastic constants of the polymers). The couplings existing between these length scales in glassy polymer interfaces are reviewed in this paper in light of the latest experimental studies.     

Tailoring the electrochemical charge storage properties of carbonaceous support by redox properties of heteropoly acids: where does the synergy come from?

Journal of Solid State Electrochemistry - The synergistic effects between two Keggin-type heteropoly acids (HPAs) and carbon surface were examined and elucidated. An improved high rate capability...     

DFT study of the conductance of molecular wire:The effect of coupling geometry and intermolecular interaction on the transport properties

The density functional theory (DFT) combining with the non-equilibrium Green functions (NEGF) method is applied to the study of the electronic transport properties for a Di-thiol-benzene (DTB) molecule coupled to two Au(111) surfaces. The dependence of the transport properties on the bias, the coupling geometry of the molecule-electrode interface, and the intermolecular interaction are examined in detail. The results show that the existence of the hydrogen atom at the end of the DTB molecule would significantly decrease the transmission coefficients, and then the differential conductance (dI/dV). By changing the position of the DTB molecule located between two electrodes a maximum value of calculated current is observed. It is also found that the intermolecular interaction will strongly influence the transport properties of the system studied.     

CO2 deactivation of supported amines: does the nature of amine matter?

Adsorption of CO(2) was investigated on a series of primary, secondary, and tertiary monoamine-grafted pore-expanded mesoporous MCM-41 silicas, referred to as pMONO, sMONO, and tMONO, respectively. The pMONO adsorbent showed the highest CO(2) adsorption capacity, followed by sMONO, whereas tMONO exhibited hardly any CO(2) uptake. As for the stability in the presence of dry CO(2), we showed in a previous contribution [J. Am. Chem. Soc.2010, 132, 6312-6314] that amine-supported materials deactivate in the presence of dry CO(2) via the formation of urea linkages. Here, we showed that only primary amines suffered extensive loss in CO(2) uptake, whereas secondary and tertiary amines were stable even at temperature as high as 200 °C. The difference in the stability of primary vs secondary and tertiary amines was associated with the occurrence of isocyanate as intermediate species toward the formation of urea groups, since only primary amines can be precursors to isocyanate in the presence of CO(2). However, using a grafted propyldiethylenetriamine containing both primary and secondary amines, we demonstrated that while primary amines gave rise to isocyanate, the latter can react with either primary or secondary amines to generate di- and trisubstituted ureas, leading to deactivation of secondary amines as well.     

On the complexation of Trolox with methyl-β-cyclodextrin: characterization, molecular modelling and photostabilizing properties

Exposure to UV radiations could reduce the efficiency of some antioxidants like Trolox (6-hydroxy-2,5,7,8-tetramethylchroman-2-carboxylic acid), a water-soluble vitamin E analogue largely employed in cosmetic products. Accordingly, in this paper we examined the possibility of increasing the stability of Trolox towards UVB irradiation by its complexation with methyl-β-cyclodextrin. Formation of the inclusion complex was confirmed by solubility diagrams, differential scanning calorimetry (DSC), and diffusion study through hydrophilic membrane. The stability constants and docking results suggested that the complexation phenomenon was related to the pH of the medium. The photodegradation studies were carried out in different topical formulations (gel, O/W emulsion, and W/O/W emulsion) containing Trolox free or complexed with methyl-β-cyclodextrin. Results showed that in all the cases Trolox degraded following pseudo-zero order kinetics. Moreover, the host molecule increased Trolox photostability also in the presence of TiO₂, a physical sunscreen well-known as photocatalyzer.     

Why does the rouse model fairly describe the dynamic characteristics of polymer melts at molecular masses below critical mass?

Generalization of the Rouse model without any use of the postulates concerning the Gaussian distribution of the vector connecting the ends of segments is advanced. In the initial (in general, nonlinear) Langevin equations, self-averaging over continuous fragments of a macromolecule naturally defines a linear term for the tagged chain, and this term differs from the entropy term of the classical Rouse model only by the numerical coefficient. According to the inertia-free approximation, the initial decay rates of correlation functions for the normal modes are described by the Rouse model independently of the character of fluctuations of the vector connecting the ends of the Kuhn segment. This statement is valid for any moment if the initial Langevin equations are treated in terms of the approximation of dynamic self-consistency. Simulation of the Fraenkel chains by the method of Brownian dynamics shows that decay of autocorrelation functions of shortwave normal modes is fairly described by the linearized equations for a given model of a chain and that the Rouse equation can be used for the long-wave modes. The results of this study make it possible to explain a marked difference between the lengths of the Kuhn and Rouse segments that is estimated from static and dynamic experiments.     

The lighter side of darwinism? Photoselection of the species: Applications of luminescence anisotropy measurements to the study of polymer relaxation

The application of luminescence anisotropy techniques to the study of polymer systems is discussed. Investigations of polymer relaxation both in fluid solutions and the solid state are addressed. Particular attention has been paid to considerations of reliable means of information retrieval from experimental time-resolved anisotropy data.     

Examining the performance of DFT methods in uranium chemistry: does core size matter for a pseudopotential?

We have investigated the performance of DFT in U(VI) chemistry. A large, representative selection of functionals has been tested, in combination with two ECPs developed in Stuttgart that have different-sized cores (60 and 78 electrons for U). In addition, several tests were undertaken with another 14 electron pseudopotential, which was developed in Los Alamos. The experimental database contained vibrational wavenumbers, thermochemical data, and (19)F chemical shifts for molecules of the type UF(6-n)Cl(n). For the prediction of vibrational wavenumbers, the large-core RECP (14 electrons) gives results that are at least as good as those obtained with the small-core RECP (32 electrons). GGA functionals are as successful as hybrid GGA for vibrational spectroscopy; typical errors are only a few percent with the Stuttgart pseudopotentials. For thermochemistry, hybrid versions of DFT are more successful than GGA, LDA, or meta-GGA. Marginally better results are obtained with a 32 electron ECP than with 14; since the experimental uncertainties are at least 25 kJ/mol for each reaction, the best functionals give results that are essentially indistinguishable from experiment. However, large-basis CCSD(T) results match experiment better than any DFT that we examined. Our findings for NMR spectroscopy are rather disappointing; no combination of pseudopotential, functional, and basis yields even a qualitatively correct prediction of trends in the (19)F chemical shifts of UF(6-n)Cl(n) species. Results yielded by the large-core RECP are, in general, slightly less bad than those obtained with the small core. We conclude that DFT cannot be recommended for predictions of NMR spectra in this series of compounds, though this conclusion should not be generalized. Our most important result concerns the good performance of the large-core Stuttgart pseudopotential. Given its computational efficiency, we recommend that it be used with DFT methods for the prediction of molecular geometries, vibrational frequencies, and thermochemistry of a given oxidation state. The hybrid GGA functionals MPW1PW91 and PBE0 give the best results overall.     

Diffusion of solutions in the course of the matrix synthesis of composite membranes MF-4SC—polyaniline and their transport properties

The dependence of the kinetics of diffusion transfer of solutions through MF-4SC and MC-40 ion-exchange membranes during the matrix synthesis of polyaniline on the composition of feed solutions and the nature of the initiating agents and the polymer matrix is studied. The effect of the conditions of the modification of the parent membrane on the resultant physicochemical characteristics is studied. The conditions of synthesis for the preparation of MF-4SC—polyaniline (emeraldine) composites with an optimized combination of conducting and diffusion characteristics are found. The contribution of electron conductivity to the overall proton-electron conductivity of the composite films is estimated.     

How do trehalose, maltose, and sucrose influence some structural and dynamical properties of lysozyme? Insight from molecular dynamics simulations

The influence of three well-known disaccharides, namely, trehalose, maltose, and sucrose, on some structural and dynamical properties of lysozyme has been investigated by means of molecular dynamics computer simulations in the 37-60 wt % concentration range. The effects of sugars on the protein conformation are found to be relatively weak, in agreement with the preferential hydration of lysozyme. Conversely, sugars seem to increase significantly the relaxation times of the protein. These effects are shown to be correlated to the fractional solvent accessibilities of lysozyme residues and further support the slaving of protein dynamics. Moreover, a significant increase in the relaxation times of lysozyme, sugars, and water molecules is observed within the studied concentration range and may result from the percolation of the hydrogen-bond network of sugar molecules. This percolation appears to be of primary importance to explain the influence of sugars on the dynamical properties of lysozyme and water.     

Investigations on the adsorbents for uremic middle molecular toxins (Ⅱ)——Influences of crosslinking agent chain length on the adsorption capacities of crosslinked chitosan adsorbents

Chitosan resins, which clinically served as adsorbents in hemoperfusion therapy, were prepared with reversed-phase suspension methodology using three differently structured crosslinking agents, methanal, glyoxal and glutaraldehyde. And the glyoxal and glutaraldehyde crosslinked chitosan resins were reduced with NaBH4 afterwards. By analyzing the results from FTIR and SEM, it was found that the reduction treatment to the adsorbents efficiently improved the chemical stability of these chitosan resins, and the shifts in crosslinking agents exerted influences over the morphologies of the adsorbents obviously. After being put to use in the adsorption tests upon some model uremic middle molecular toxins and BSA in vitro, all three adsorbents demonstrated a fairly realistic adsorption capability to the model toxins but little to BSA. And the adsorption process reached the equilibrium in a clinically qualified short time. But the adsorption capacities of these adsorbents to the model toxins were quite different. It     

Why does silane enhance the protective properties of epoxy films?

Using neutron reflectivity, the protection mechanisms of a novel one-step epoxy-silane coating system were investigated in terms of coating structure and water response behavior. By comparing pure epoxy and epoxy-silane mixtures in various aqueous environments, the effects of the addition of silane were determined. Specifically, a bridged bis-silane coupling agent with six alkoxy moieties and a polysulfur bridge was investigated. The key mechanisms of silane-enhanced protection are (1) the silane is enriched at the substrate-coating interface, forming a hydrophobic dense interfacial layer and good adhesion to the substrate, and (2) the silane serves as a cross-linker, resulting in a denser and less hydrophilic bulk film compared to the neat epoxy. The hydrophobic nature of bis-sulfur silane also increases the overall hydrophobicity of the mixed film.     

A series of novel side chain liquid crystalline polysiloxanes containing cyano‐ and cholesterol‐terminated substituents: Where will the structure‐dependence of terminal behavior of the side chain reappear?

A series of polysiloxane side chain liquid crystal polymers with strong polarity cyano substitution‐terminated achiral side chains and cholesterol‐terminated chiral side chains was successfully synthesized via thiol‐ene click chemistry. ¹H‐NMR, FT‐IR, and thermogravimetric analysis were used to confirm their chemical structures and thermal stabilities. Their phase transition behaviors and phase structures were systematically investigated by a combination of analysis methods such as differential scanning calorimetry, polarized optical microscopy, and X‐ray. Results revealed that attributing to the decisive role of the polarity interaction, all the polymers only developed a monolayer interdigitated SmA phase in which the period arrangement was determined by the cyano‐terminated side chains, the increased content of cholesterol‐terminated chiral side chains (X_chol) just expanded the distance between neighboring molecules within a layer. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1765–1772     

New Insight into the Source of Biomolecular Homochirality: An Extraterrestrial Origin for Molecules of Life?

Circular polarized light in space might be responsible for the fact that amino acids isolated from meteorites are not racemic. For example, 1 has been found with an enantiomeric excess of up to 10.4%. Such radiation has now been observed for the first time.     

Modification of α-ZrP nanofillers by amines of different chain length: Consequences on the morphology and mechanical properties of styrene butadiene rubber based nanocomposites

An aqueous slurry of α-ZrP lamellar nanofillers has been modified by amine type surfactants. The influence of the alkylamine chain length and of the cationic exchange rate on the nanofiller d-spacing has been analyzed. The strength of the interactions formed between the intercalating agent and the filler has been studied by Infra Red Spectroscopy (FTIR), Solid-state Nuclear Magnetic Resonance (³¹P MAS NMR) and Thermogravimetric Analysis (TGA). Different routes allowing to obtain optimized filler properties while minimizing the surfactant weight amount have been proposed from the detailed analysis of the intercalation mechanism. Styrene Butadiene Rubber nanocomposites have been prepared directly from the different slurries of modified α-ZrP. The dispersion of the organophilic α-ZrP in the SBR matrix has been characterized and the mechanical properties of the corresponding nanocomposites have been determined and discussed as a function of the filler modification, of the nanocomposite morphology and of the filler/matrix interfacial properties.     

Does amino acid sequence determine the properties of Aβ dimer?

The effect of random reshuffling of amino acids on the properties of dimers formed by Aβ peptides is studied using replica exchange molecular dynamics and united atom implicit solvent model. We show that thermodynamics of dimer assembly and the dimer globule-like state are not affected by sequence permutation. Furthermore, sequence reshuffling does not change the distributions of non-local interactions and, to a large extent, amino acids in the dimer volume. To rationalize these results, we demonstrate that Gaussian statistics applies surprisingly well to the end-to-end distances of the peptides in the dimer implying that non-bonded interactions between distant along the chain amino acids are effectively screened. This observation suggests that peptides in the dimer behave as ideal chains in polymer melt, in which amino acids lose their "identity" and therefore the memory of sequence position. As a result large-scale properties of the dimer become universal or sequence independent. Comparison of our simulations with the prior theoretical studies and their implications for experiments are discussed.     

A new dehydrogenase from Clostridium acetobutylicum for asymmetric synthesis: dynamic reductive kinetic resolution entry into the Taxotère side chain

An NADP-dependent alcohol dehydrogenase from Clostridium acetobutylicum (CaADH) has been expressed and characterized. CaADH enantioselectively reduces aromatic α-, β- and γ-keto esters to the corresponding D-hydroxy esters and provides a building block for the Taxotère side chain (95% yield, 95% de, 99% ee) by dynamic reductive kinetic resolution (DYRKR).