On-line preparation of microsamples prior to CE

An experimental setup is presented here for the automated analysis of microsamples, based on the on-line coupling of a capillary SPE module and a CE unit using a two-position six-port valve, an open-closed valve to isolate electrically the sample preparation from the CE unit and a "T" interface. A C18 trapping microcolumn (dimensions 2.5 cm x 100 microm id x 360 microm od) was used for the SPE step. The utility of the proposed experimental setup was demonstrated by applying it to the determination of quinolone antibiotics in serum microsamples, which was efficiently carried out in less than 20 min (4 min for protein denaturation and 15 min for analytes preconcentration and CE-UV separation-determination). A complete optimization study was performed for preconcentration and cleanup of quinolones, the coupling of sample preparation module to the CE unit and electrophoretic separation of quinolones. A preconcentration factor of 10.4 was achieved. The volume injected with the proposed method was 125 nL versus 160 nL introduced by hydrodynamic injection. The volume required for the analysis was 2 microL, which makes the proposed experimental setup very useful for the analysis of microsamples in fields of current interest such as metabolomics or proteomics.     

Capillary Zone Electrophoresis of Eleven Priority Phenols with Amperometric Detection

A scheme for separation and detection of eleven priority phenols using capillary zone electrophoresis (CZE) coupled with amperometric detection is described. With a capillary of I.D. 50 μm and length 62.5 cm at 9 kV and an electrophoretic buffer of 20 mM CHES (pH 10.1), complete separation of the eleven compounds was achieved in less than 17 min. Amperometric detection was carried out using a carbon fiber microelectrode of diameter 9 μm inserted into the end of the detection capillary. Linearity over two orders of magnitude was generally obtained for the eleven priority phenols. With an electrode potential+1.10 V (vs. Ag/AgCl reference), the concentration limits of detection were in the sub-ppm (10^?6 M) level. This method was successfully applied to analysis of priority phenols in industrial waste water.     

Determination of chlorophenols in human urine based on the integration of on-line automated clean-up and preconcentration unit with micellar electrokinetic chromatography.

A new method was developed and validated for the determination of chlorophenols in human urine by using micellar electrokinetic chromatography (MEKC) coupled via a mechanic arm to an on-line automatic clean-up and preconcentration unit for urine samples. Separation is accomplished by using a selective buffer consisting of 15 mM borate, 25 mM phosphate and 100 mM sodium dodecyl sulfate (SDS) at pH 9.1 in addition to a positive power supply of 25 kV at 18 degrees C. The proposed capillary electrophoresis (CE) method allows the separation of 11 chlorophenols within 7 min with a reproducibility as relative standard deviation (RSD) between 2.6% and 7.2%, and limits of detection (LODs) between 0.08 and 0.46 microg/mL for all chlorophenols. Urine samples were previously hydrolyzed with 37% HCl at 80 degrees C for 60 min and then cleaned on a C-18 mini-column. Recoveries ranged from 58% to 103%. The preconcentration treatment affords limits of determination between 4 and 12 ng/mL for all chlorophenols except pentachlorophenol and 4-chlorophenol, which could not be determined. The overall analysis time, including on-line clean-up, preconcentration and electrophoretic separation is 20 min per sample.     

Determination of Organophosphorus P sticides in Water, Vegetables and Grain by Automated SPE and MEKC

A sensitive method for the multi-residue analysis of organophosphorus pesticides in environmental samples has been developed. It involves an automated solid phase extraction procedure using a Gilson ASPEC XLi and capillary electrophoresis analysis with UV detection. Acephate, methamidophos, dichlorvos, dicrotophos and malathion could be separated by micellar electrokinetic capillary chromatography using an electrophoretic electrolyte containing 20 mM phosphate buffer (pH 7.5) and 75 mM sodium dodecyl sulphate. A linear relationship between concentration and peak area was obtained within the range 0.2–450 g mL^?1 with correlation coefficients greater than 0.996 and detection limits between 7 and 150 ng mL^?1. Intra- and inter-day precision values of about 0.8–2.3% RSD (n=11) and 0.9–3.0% RSD (n=15), respectively were obtained. When the preconcentration step was used, an enrichment factor of 250 was easily achieved in the analysis of water samples, making it possible to determinate pesticide residues at concentration levels as low as 0.04 ng mL^?1. In analyses of vegetables and grains, the sensitivity levels were about 0.03 μg^?1.     

Determination of neonicotinoid insecticides in environmental samples by micellar electrokinetic chromatography using solid‐phase treatments

A sensitive and reliable method based on MEKC has been developed and validated for trace determination of neonicotinoid insecticides (thiamethoxam, acetamiprid, and imidacloprid) and the metabolite 6‐chloronicotinic acid in water and soil matrices. Optimum separation of the neonicotinoid insecticides was obtained on a 58 cm long capillary (75 μm id) using as the running electrolyte 40 mM SDS, 5 mM borate (pH 10.4), and 5% (v/v) methanol at a temperature of 25°C, a voltage of 25 kV and with hydrodynamic injection (10 s). The analysis time was less than 7 min. Prior to MEKC determination, the samples were purified and enriched by carrying out extraction‐preconcentration steps. For aqueous samples, off‐line SPE with a sorptive material such as Strata‐X (polymeric hydrophobic sorbent) and octadecylsilane (C₁₈) was carried out to clean up and preconcentrate the insecticides. However, for soil samples, matrix solid‐phase dispersion (MSPD) was applied with C₁₈ used as the dispersant. Good linearity, accuracy, and precision were obtained and the detection limits were in the range between 0.01 and 0.07 μg mL^?1 for river water and 0.17 and 0.37 μg g^?1 for soil samples. Recovery levels reached greater than 92% for all of the assayed neonicotinoids in river water samples with Strata‐X. In soil matrices, the best recoveries (63–99%) were obtained with MSPD.     

Electrophoretic determination of calystegines A3 and B2 in potato

Potatoes, members of the Solanaceae plant family, contain calystegines, water-soluble nortropane alkaloids, which are biologically active as glycosidase inhibitors. The content of calystegines A(3) and B(2) in different varieties of potato and in various parts of the tubers (whole potato, peel, flesh, and sprouts) were analysed by new capillary zone electrophoresis and capillary isotachophoresis methods and by the routine GC method. The optimized background electrolyte for capillary zone electrophoretic analysis was mixture of 20 mM histidine, 20 mM N,N-bis(2-hydroxyethyl)-2-aminoethanesulfonic acid and 20% (v/v) methanol in demineralized water. Calystegines were detected by indirect UV detection at 210 nm. A clear separation of calystegines from other components of the methanolic sample extract was achieved within 4 min. The electrolytes for isotachophoretic analysis consisted of 5 mM NH(4)OH, 10 mM N,N-bis(2-hydroxyethyl)-2-aminoethanesulfonic acid, 0.1% hydroxyethylcellulose and 20% (v/v) methanol in demineralized water (leading) and 5 mM histidine+10 mM acetic acid+20% (v/v) methanol in demineralized water (terminating). Calystegines were separated within 20 min and detected by a conductimeter. Method characteristics of both zone electrophoresis and isotachophoresis, i.e., linearity (10-100 ng/microl and 1-10 ng/microl), accuracy (recovery 96+/-5% and 98+/-4%), intra-assay repeatability (4.2% and 3.5%), and detection limit (3 and 0.4 ng/microl) were evaluated. Simple sample preparation, sufficient sensitivity, speed of analysis, and low running cost are important attributes of the electrophoretic methods. The overall results of electrophoretic methods were comparable with GC.     

Sensitive capillary electrophoretic determination of mercury species with amperometric detection at a copper electrode after cation exchange preconcentration

A capillary electrophoretic method for the separation of four mercury species with amperometric detection was developed. Inorganic Hg2+, methyl-, ethyl-, and phenyl-mercury were complexed with L-cysteine and separated in a counterelectroosmotic mode in an electrolyte solution comprised of 20 mM sodium tetraborate at pH 9.5. Amperometric detection of separated species was achieved at passivated copper electrode under electrocatalytic oxidation conditions. The four mercury species were separated in less than 8 min with LODs ranging from 170 to 450 microg/L. Cation exchange preconcentration was used to decrease the LODs down to 1.7 microg/L.     

Use of an ionic liquid‐based surfactant as pseudostationary phase in the analysis of carbamates by micellar electrokinetic chromatography

The applicability of an ionic liquid‐based cationic surfactant 1‐dodecyl‐3‐methyl‐imidazolium tetrafluoroborate (C₁₂MImBF₄) as pseudostationary phase in MEKC has been evaluated for the analysis of 11 carbamate pesticides (promecarb, carbofuran, metolcarb, fenobucarb, aldicarb, propoxur, asulam, benomyl, carbendazim, ethiofencarb, isoprocarb) in juice samples. Under optimum conditions (separation buffer, 35 mM NaHCO₃ and 20 mM C₁₂MImBF₄, pH 9.0; capillary temperature 25°C; voltage –22 kV) the analysis was carried out in less than 12 min, using hydrodynamic injection (50 mbar for 7.5 s) and detection at 200 nm. For the extraction of these CRBs from juice samples, a dispersive liquid–liquid microextraction (DLLME) procedure has been proposed, by optimization of variables affecting the efficiency of the extraction. Following this treatment, sample throughput was approximately 12 samples per hour, obtaining a preconcentration factor of 20. Matrix‐matched calibration curves were established using tomato juice as representative matrix (from 5 to 250 μg/L for CBZ, BY, PX, CF, FEN, ETH, ISP, and 25–250 μg/L for ASL, ALD, PRC, MTL), obtaining quantification limits ranging from 1 to 18 μg/L and recoveries from 70 to 96%, with RSDs lower than 9%.     

Fingerprinting postblast explosive residues by portable capillary electrophoresis with contactless conductivity detection

A portable capillary electrophoretic system with contactless conductivity detection was used for fingerprint analysis of postblast explosive residues from commercial organic and improvised inorganic explosives on various surfaces (sand, concrete, metal witness plates). Simple extraction methods were developed for each of the surfaces for subsequent simultaneous capillary electrophoretic analysis of anions and cations. Dual‐opposite end injection principle was used for fast (<4 min) separation of 10 common anions and cations from postblast residues using an optimized separation electrolyte composed of 20 mM MES, 20 mM l ‐histidine, 30 μM CTAB and 2 mM 18‐crown‐6. The concentrations of all ions obtained from the electropherograms were subjected to principal component analysis to classify the tested explosives on all tested surfaces, resulting in distinct cluster formations that could be used to verify (each) type of the explosive.     

Determination of 5-nitroimidazoles and metabolites in environmental samples by micellar electrokinetic chromatography

A method based on micellar electrokinetic chromatography (MEKC) with UV detection has been developed for the determination of nine 5-nitroimidazoles (5-NDZs), including metabolites in river water samples. Due to the relative insensitivity of UV detection in MEKC, a solid-phase extraction (SPE) method has been proposed that preconcentrates water samples fiftyfold and cleans them up off-line. An on-line preconcentration approach based on sweeping and the use of an extended light path fused-silica capillary (64.5?cm?×?50?μm i.d., 56?cm effective length) was also found to improve the sensitivity of the method. Separation was carried out in <21?min using 20?mM phosphate buffer (pH 6.5) and 150?mM SDS as the background electrolyte (BGE). The temperature of the capillary was kept constant at 20°C, a voltage of 25?kV was applied (normal mode), and a detected wavelength of 320?nm was utilized. Hydrodynamic injection (50?mbar for 15?s) of the samples, which were dissolved in 20?mM phosphate (pH 6.5), was employed. The limits of detection were lower than 1.1?μg?L(-1). Recoveries of >80% from spiked river water samples were obtained for most of the analytes at three different concentration levels with acceptable precision. This method could provide an efficient and economical alternative to the use of chromatographic methods to monitor nitroimidazole residues, thus supplementing the relatively few methods available for the analysis of these compounds in environmental samples.     

Monolithic and packed particle materials for in-line pre-concentration in capillary electrophoresis for 4-hydroxy-3-methoxy-methamphetamine and terbutaline

In-line solid-phase extraction (SPE) for capillary electrophoresis (CE) was investigated using a synthesized monolith and a commercial packing material. Terbutaline (TER) and 4-hydroxy-3-methoxy-methamphetamine (HMMA) with benzyl alcohol as the electroosmotic flow marker were employed as model compounds. Two types of methacrylate-based monoliths, namely methacrylic acid-ethylene dimethacrylate and butylmethacrylate-ethylene dimethacrylate were examined. Preliminary results indicated that a non-aqueous separating medium is more suitable for these methacrylate monoliths than a purely aqueous medium (non-reproducible elution). However, coupling of the methacrylic acid-ethylene dimethacrylate with non-aqueous capillary electrophoresis could not provide good precision for the three model compounds. A packed-silica C18 SPE was also adopted by simply packing the C18 particles in situ in the separation capillary. Using an aqueous running buffer (10 mM phosphate buffer (PPB), pH 7), acceptable precision could be obtained with this type of SPE material. With a 10 min loading time and 20 min total analysis time, the pre-concentration factors were 333 and 1000 for TER and HMMA, respectively. The %RSD were less than 4.5 and 0.3 for the peak areas and migration times, respectively, for both HMMA and TER (n=20).     

Development of a micellar electrokinetic capillary chromatography method for the determination of four naphthalenediols in cosmetics and a comparison with a HPLC method

A micellar electrokinetic capillary chromatography (MEKC) method with ultraviolet visible (UV) detection was used for the determination of 1,7-naphthalenediol, 2,3-naphthalenediol, 1,5-naphthalenediol, and 2,7-naphthalenediol in cosmetics. The current method for their determination in various cosmetics is high-performance liquid chromatography (HPLC). Separation conditions affecting the MEKC method were optimized as 20 mM Na₂B₄O₇–50mM SDS, pH 9.8, with 22 kV applied voltage and UV detection at 230 nm. Under optimal conditions, electrophoretic analysis was completed in less than 6 min, with limit of detection (LOD) of 0.070–0.19 μg/mL and limit of quantitation (LOQ) of 0.23–0.63 μg/mL. A good linear relationship (r² > 0.99) was obtained at the range of 0.75–20 μg/mL. Recoveries for the four naphthalenediols in lotion, loose powder, and sun cream are between 91.2–107.2% with relative standard deviation (RSD) less than 4.04%. The method has been successfully applied to the determination of the four naphthalenediols in different kinds of cosmetics. A comparison with HPLC-UV method was also carried out according to the National Standards of the People's Republic of China. The results obtained by MEKC and HPLC methods are comparable, but the proposed MEKC method can help us obtain a much shorter detection time and low cost.     

Determination of the beta-blocker atenolol in plasma by capillary zone electrophoresis

A capillary zone electrophoretic method was optimised for the determination of the beta-blocker atenolol in plasma. Separation was performed in an uncoated silica capillary of 58.5 cm (effective length 50 cm) x 75 microm I.D., and detection was at 194 nm. The effects of the buffer (concentration and pH), the injection time, the voltage applied and the plasma clean-up procedure were studied. The determination of atenolol was achieved in less than 3 min, using an electrolyte of 50 mM H3BO3-50 mM Na2B4O7 (50:50, v/v) pH 9, injected hydrodynamically for 4 s at 50 mbar and applying a voltage of +25 kV. This method was applied to the determination of atenolol in plasma of nine hypertensive patients (male and female, aged from 39 to 73 years). Atenolol concentrations found vary from 30 to 585 ng/ml.     

A capillary zone electrophoresis for determination of thiolic peptides in biological samples

A new method to improve the analyses of thiolic peptides (cysteine, γGlu-Cys, glutathione, phytochelatins and desglycyl-phytochelatins) derivatized with monobromobimane (mBrB) in complex biological samples by CZE is described. The method involves a SPE using Sep-Pak Light C18 Cartridges after derivatization and a later CZE analysis. Elution of mBrB-thiols was achieved with 10 mM HCl + 70% methanol v/v in deionised water. Electrophoretic parameters, such as BGE pH and concentration, different organic additives (methanol and trifluoroethanol), applied voltage and capillary length were studied in order to establish suitable analytical conditions. Optimum separation of the mBrB-thiolic peptides was obtained with 100 mM sodium borate buffer at pH 7.60. The electrophoretic conditions were +15 kV, capillary length of 90 cm from inlet to detector (98 cm total length, 50 μm ID), samples were loaded into the capillary by hydrodynamic injection (50 mbar, 20 s) and detection was performed at 390 nm. The improved method showed good reproducibility, linearity and sensitivity. The LODs and LOQs estimated using a standard of GSH were 1.41 and 4.69 μM respectively.     

Development and validation of a capillary electrophoresis method for the determination of phenothiazines in human urine in the low nanogram per milliliter concentration range using field-amplified sample injection

A capillary zone electrophoresis (CZE) method with ultraviolet-visible detection has been established and validated for the determination of five phenothiazines: thiazinamium methylsulfate, promazine hydrochloride, chlorpromazine hydrochloride, thioridazine hydrochloride, and promethazine hydrochloride in human urine. Optimum separation was obtained on a 64.5 cm x 75 microm bubble cell capillary using a buffer containing 150 mM tris(hydroxymethyl)aminomethane and 25% acetonitrile at pH 8.2, with temperature and voltage of 25 degrees C and 20 kV, respectively. Naphazoline hydrochloride was used as an internal standard. Field-amplified sample injection (FASI) has been applied to improve the sensitivity of the detection. Considering the influence of parameters affecting the on-line preconcentration (nature of preinjection plug, sample solvent composition, injection times, and injection voltage) and due to the significant interactions among them, in this paper we propose for the first time the application of a multivariate approach to carry out the study. The optimized conditions were as follows: preinjection plug of water for 7 s at 50 mbar, electrokinetic injection for 40 s at 6.2 kV, and 32 microm of H3PO4 in the sample solvent. Also, a solid-phase extraction (SPE) procedure is developed to obtain low detection limits and an adequate selectivity for urine samples. The combination of SPE and FASI-CZE-UV allows adequate linearities and recoveries, low detection limits (from 2 to 5 ng/mL), and satisfactory precisions (3.0-7.2% for an intermediate RSD %).     

Improved determination of 5-fluorouracil and its prodrug tegafur in pharmaceuticals by large-volume sample stacking in CE

On-line determination of the anti-tumor drug 5-fluorouracil (5-FU) and its prodrug, tegafur (TF) was achieved for the first time by capillary electrophoresis with large-volume sample stacking (CE-LVSS). The optimal electrophoretic buffer consisted of 30 mM phosphate buffer at pH 8.0. Without the LVSS procedure, the limits of detection (LOD) were 600.5 ng/mL and 771.4 ng/mL for 5-FU and TF, respectively. With the LVSS procedure, the sensitivity was significantly improved by about two orders of magnitude (the LODs of 5-FU and TF were decreased to 7.9 ng/mL and 6.5 ng/mL, respectively). The %RSD was less than 5%. This method compared favorably with other reported techniques and was applied successfully to the quantitative analysis of anti-tumor drugs in commercial injection preparations. The results show that the method is simple, fast (less than 3 min), highly selective, and sensitive.     

Determination of urea-derived pesticides in fruits and vegetables by solid-phase preconcentration and capillary electrophoresis

A multiresidue analytical method based on solid-phase extraction (SPE) enrichment combined with capillary electrophoresis (CE), using micellar electrokinetic capillary chromatography (MEKC), was developed to determine ten substituted urea pesticides in orange and tomato samples. Several factors such as pH, composition and concentration of the buffer, concentration of surfactant, addition of organic solvent, and working voltage were optimized to obtain the best compound separation in the shortest time. Separation can be achieved in 7 min using a micellar aqueous pH 9 buffer composed of 4 mM borate and 35 mM sodium dodecyl sulfate. After an SPE procedure, which provided a 10-fold enrichment, the limit of detection was about 0.05 mg kg(-1), which is in the order of the maximum residue limits (MRLs) established by the European Union (EU) for most of these compounds. Increasing the enrichment factor by using a larger amount of sample is difficult in oranges due to the matrix interferences, but is possible in tomatoes, which gave cleaner extracts and easily reached a 25-fold enrichment factor. The procedure involving SPE and CE provided acceptable recoveries (ranged 42-118%) and relative standard deviations (RSDs; < 19%) at levels between 0.3 and 5 mg kg(-1).     

Determination of pesticides in drinking water by micellar electrokinetic capillary chromatography

A new analytical procedure using a two-step sample preconcentration (solid-phase extraction (SPE) and field-amplified sample stacking) prior to separation by micellar electrokinetic capillary chromatography was developed for the determination of 14 pesticides such as aldicarb, carbofuran, isoproturon, chlorotoluron, metolachlor, mecoprop, dichlorprop, MCPA, 2,4-D, methoxychlor, TDE, DDT, dieldrin, and DDE in drinking water. Good recoveries of pesticides were obtained using SPE with sample pH adjusted to 2-3. Field-amplified sample stacking was found to give enrichment factors up to 30-fold preconcentration of various pesticides under reversed polarity at -2 kV for 50 s. The optimized background electrolyte (BGE) consisted of 50 mM sodium dodecyl sulfate (SDS), 10 mM borate buffer, 15 mM beta-cyclodextrin (beta-CD), and 22% acetonitrile at pH 9.6, running was under 25 kV and detection at 202 nm. Good linearity was obtained for all pesticides with detection limits down to 0.04-0.46 ng/mL and a working range of 0.1-40 ng/mL. The repeatabilities of migration time and peak area were satisfactory with relative standard deviations (RSDs) between 0.66 and 13.6% and 4.1 and 28%, respectively. All pesticides except dieldrin were found to be detected at concentrations at least tenfold lower than the World Health Organization (WHO) guideline values. The analytical procedure developed offers an economic method for fast screening of multiple pesticide residues in drinking water for health protection. It had been applied to determine carbofuran and MCPA in agricultural run-off water samples, giving satisfactory repeatabilities of 10 and 12%, respectively, with n=5 for the determination of pesticides in contaminated water samples.     

Use of SDS micelles for improving sensitivity, resolution, and speed in the analysis of beta-lactam antibiotics in environmental waters by SPE and CE

This study dealt with the potential of MEKC with LIF detection involving derivatization with sulfoindocyanine succinimidyl ester (Cy5) for the separation and determination of beta-lactam antibiotics (ampicillin, amoxicillin, cephradine, and cephalexin) in environmental water samples. Water samples of 50 mL were enriched by SPE by passage through a weak base-cation Amberlite(R) IRA-93 exchange column. SDS micelles play important roles in the whole analytical process by improving the yield (sensitivity) and the kinetics of the labeling reaction, the elution of the retained antibiotics from the SPE preconcentration system and the electrophoretic resolution of their Cy5-derivatives. The optimum procedure includes a derivatization step of the antibiotics at 25 degrees C for 10 min and direct injection for MEKC analysis, which is conducted within about 15 min using 15 mM SDS in the running buffer (35 mM sodium borate at pH 9.3). LODs from 30 to 45 ng/L and RSDs (within-day precision) from 3.5 to 5.9% were obtained for the antibiotics in water samples with average recoveries ranging from 96.4 to 99.4%. These results indicate that the method proposed is a straightforward and sensitive tool for the determination of these antibiotics in environmental water samples providing similar quantitative results to those using more expensive equipment like LC-electrospray MS/MS.     

MEKC combined with SPE and sample stacking for multiple analysis of pesticides in water samples at the ng/L level

In this work, a new multiresidue analytical method based on MEKC with UV detection combined with SPE as off-line preconcentration strategy, and reversed-electrode polarity stacking mode (REPSM) as on-line stacking procedure, has been developed for the monitoring of 12 pesticides (carbendazim, pirimicarb, metalaxyl, pyrimethanil, procymidone, nuarimol, azoxystrobin, tebufenozide, fenarimol, benalaxyl, penconazole, and tetradifon) that are currently being used in the Canary Islands (Spain). The optimized MEKC buffer, consisting of 100 mM sodium tetraborate and 30 mM SDS at pH 8.5 with 6% v/v 1-propanol, provided baseline resolution of the 12 pesticides in less than 20 min. The developed method was applied to the analysis of mineral, stagnant, and tap water samples. The proposed SPE-REPSM-MEKC-UV method showed high extraction efficiencies with detection limits (LODs) at the low ng/L level providing LOD values down to 64 ng/L for these real samples.