Nonlinear propagation of ion plasma waves in dust-ion plasma including quantum-relativistic effect

In this paper we have theoretically investigated the quantum and relativistic effects on ion plasma wave in an unmagnetised dust-ion plasma. By using the method of normal mode analysis, we have obtained a linear dispersion relation. It has been analysed numerically for quantum and relativistic effects on the propagation of ion plasma wave. By using the standard reductive perturbation technique, we have derived a Korteweg–de Vries (KdV) equation which describes the nonlinear propagation of the wave. Numerically, it is shown that only compressive type of soliton can exist in the plasma under consideration. It is found that the solitary wave profile depends significantly on the quantum and relativistic parameters. The dust size, dust charge and the dust number density are also shown to have significant influences on these solitary waves. The results of this present investigation have some relevance to the nonlinear propagation of ion plasma wave in some astrophysical, space and laboratory plasma environments.     

Laser ultrasonic propagation imaging method in the frequency domain based on wavelet transformation

A wavelet-transformed ultrasonic propagation imaging method capable of ultrasonic propagation imaging in the frequency domain was developed and applied as a new structural damage or flaw visualization algorithm. Since the wavelet-transformed ultrasonic propagation imaging method has strong frequency selectivity, it can visualize the propagation of ultrasonic waves of a specific frequency (for example, to isolate ultrasonic mode of interest and a damage-related ultrasonic wave). The strong frequency selectivity of the wavelet-transformed ultrasonic propagation imaging method was demonstrated, isolating only the zeroth-order asymmetrical mode of the fundamental Lamb wave modes in an anisotropic carbon fiber-reinforced plastic plate with a thickness of 5 mm. The wavelet-transformed ultrasonic propagation imaging method can also convert a complex time domain multiple wavefield into a simple frequency domain single wavefield. This feature enables easy interpretation of the results, and facilitates the precise evaluation of the location and size of structural damage or flaws. We demonstrated this capability by detecting a disbond in a sandwich structure made of Al-alloy skins and a foam core. A disbond with a diameter of 20 mm, which is representative of a common manufacturing flaw, was successfully detected, localized, and evaluated. Since a method to determine the allowable maximum pulse repetition frequency depending on target materials and structures was found by investigating the residual wave caused from the previous laser impinging, our laser ultrasonic system can scan rapidly the target with an optimal pulse repetition rate. In addition, the proposed wavelet-transformed ultrasonic propagation imaging method can visualize damage or flaw without the need for reference data from the intact state of the structure. Hence, we propose the wavelet-transformed ultrasonic propagation imaging approach for automatic inspection of in-service engineering structures, or in-process quality inspection in manufacturing.     

The measurement of A0 and S0 lamb wave attenuation to determine the normal and shear stiffnesses of a compressively loaded interface

Guided waves in an elastic plate surrounded by air propagate with very low attenuation. This paper describes the effect on this propagation of compressively loading an elastomer with high internal damping against one surface of the elastic plate. The propagation of both A0 and S0 Lamb modes is considered. The principal effect is shown to be increased attenuation of the guided waves. This attenuation is caused by leakage of energy from the plate into the elastomer, where it is dissipated due to high viscoelastic damping. It is shown that the increase in attenuation is strongly dependent on the compressive load applied across the solid-solid interface. This interface is represented as a spring layer in a continuum model of the system. Both normal and shear stiffnesses of the interface are quantified from the attenuation of A0 and S0 Lamb waves measured at each step of the compressive loading. The normal stiffness is also measured independently by normal incidence, bulk longitudinal wave ultrasound. The resulting predictions of wave propagation behavior, such as attenuation, obtained by the model are in excellent agreement with those measured experimentally.     

Growth of discontinuities in chemically reacting relativistic fluids

A relativistic theory is developed to study the growth of weak discontinuities propagating in a chemically reacting fluid mixture. The velocity of propagation is determined, which fully agrees with classical results in the nonrelativistic limit. The growth equation for the wave propagation in relativistic fluid flows with nonequilibrium effects is obtained and solved. The wave amplitude is determined as a function of time. The relativistic and relaxation effects on the global behavior of the wave amplitude are studied analytically. It is concluded that if the wave is of a compressive nature and its initial amplitude is greater than a critical value, then the discontinuity grows until it develops into a shock wave after a finite critical timet _c . But on the other hand if the initial wave amplitude is less than the critical one, the wave decays and damps out ultimately. It is shown that both relativistic and relaxation effects help in stabilizing the wave propagation by increasing the critical timet _c for the breakdown of the wave due to nonlinear steepening.     

Laser ultrasonic anomalous wave propagation imaging method with adjacent wave subtraction: Application to actual damages in composite wing

Laser ultrasonic wave propagation imaging methods have great potential for integrated structural health management and non-destructive evaluation. However, application of these techniques to complex structures in the field is difficult because they give rise to complicated wave propagation patterns. We developed an anomalous wave propagation imaging method with adjacent wave subtraction using laser ultrasonic scanning to solve this problem. The proposed method is suitable for non-destructive evaluation of complex structures because it highlights the propagation of anomalous waves related to structural discontinuities, and suppresses complex incident waves without the need of pre-stored reference data. In this study, the method was applied to a real composite wing subjected to bending and impact tests. The method enhanced the visibility of the anomalous waves related to damages such as stringer tip debonding, skin-spar debonding, and invisible impact damage. Based on these anomalous waves, variable time window amplitude mapping was performed to show the damage location, size, and shape resemble to the actual damage. Comparisons showed that the methods performed better than the ultrasonic A-scan in terms of damage detection and sizing accuracy. The presence of structural elements such as spars, stringers, ribs, and surface-mounted PZT elements did not adversely affect the inspection. The proposed wing test setup with a built-in ultrasonic propagation imaging system for automatic NDE could be easily expanded throughout a hanger for maintenance inspection.     

Electron-Acoustic Solitary Waves in a Two-Electron Temperature Plasma

Using fluid model the propagation of the solitary wave has been analytically investigated in a plasma of two-temperature electrons and ions. It is found that under suitable conditions ion-acoustic solitons of compressive nature and electron-acoustic solitons of rare-factive nature can exist.     

Love-type wave propagation in a pre-stressed viscoelastic medium influenced by smooth moving punch

In the present paper, a mathematical model studying the effect of smooth moving semi-infinite punch on the propagation of Love-type wave in an initially stressed viscoelastic strip is developed. The dynamic stress concentration due to the punch for the force of a constant intensity has been obtained in the closed form. Method based on Weiner–hopf technique which is indicated by Matczynski has been employed. The study manifests the significant effect of various affecting parameters viz. speed of moving punch associated with Love-type wave speed, horizontal compressive/tensile initial stress, vertical compressive/tensile initial stress, frequency parameter, and viscoelastic parameter on dynamic stress concentration due to semi-infinite punch. Moreover, some important peculiarities have been traced out and depicted by means of graphs.     

各向异性超常材料中倒退波的传播研究

研究了完全各向异性超常材料中的倒退波传播现象,得到了在材料本征轴和传输轴成任意角度情形下倒退波形成的条件,分析了超常材料的介电张量和磁导率张量、电磁波的偏振方式对倒退波形成和传播的影响. 在此基础上,进一步分析了几种不同色散曲线关系的各向异性超常材料中倒退波的产生情况,获得了电磁波波矢和坡印亭矢量(能流)夹角的具体表达式和倒退波传播的一般性结论. 此外,还研究了近零介电常数超常材料中倒退波的传播特性,发现在此类超常材料中倒退波只能是完美倒退波. 关键词： 超常材料 负折射 倒退波 各向异性     

室内人体隐匿物被动太赫兹成像研究进展

太赫兹波由于其极低的光子能量和对非极性物质较强的穿透特性已成为人体隐匿物检测应用的热点。本文以室内人体隐匿物品探测为主要应用背景,简要介绍了太赫兹波段的大气传播特性;重点分析了基于辐射检测的室内被动太赫兹成像原理和系统的关键技术,包括辐射计和阵列扫描方式等;回顾了国内外被动太赫兹成像技术在人体安检领域的研究现状。综合考虑系统成本和成像时间,一定数量的高灵敏度辐射计加上扫描机构成像的方式在未来很长一段时间里将是被动太赫兹成像系统的主流方式。     

Spatiotemporal mapping of surface acoustic waves in isotropic and anisotropic materials

We demonstrate a new method for a real-time imaging of surface acoustic waves at frequencies up to 1 GHz with picosecond temporal and micron spatial resolutions using an ultrafast optical pump and probe technique combined with a common path interferometer. Using samples with isotropic or anisotropic substrates coated with metallic thin films, we observe the propagation of Rayleigh-like modes and surface-skimming bulk modes as well as resolving surface phonon focusing effects. In addition we image surface acoustic wave propagation in a laterally inhomogeneous sample.     

Subwavelength imaging enhancement through a three-dimensional plasmon superlens with rough surface

In this Letter we investigate the subwavelength imaging of a three-dimensional plasmon superlens based on the full vector wave simulations of optical wave propagation and transmission. The optical transfer functions are computed. Comparisons are made between the results of lenses with flat and periodic/random rough surfaces. We also study the problem of practical imaging system geometry using laser as an illumination source. Results show that the lens with periodic or random roughness can reduce the field interference effects, and provide improved focus on the transmission field and the Poynting flux. We illustrate that the subwavelength roughness in a plasmon lens can enhance the image resolution over a flat lens for both matched and unmatched permittivity conditions. The enhancement of resolution occurs because the introduced subwavelength roughness can amplify the evanescent wave components and suppress the surface plasmon resonance peaks.     

受力腓肠肌剪切波速度的超声检测

肌肉组织受力时的弹性特征变化,是其功能特性、健康状态的重要评估参量.该文利用在离体肌肉组织表面施加低频振动引起组织发生形变,在组织内部产生剪切波的方法,经过快速超声成像,通过剪切波图像估计剪切波的传播速度.研究结果表明顺肌纤维方向传播的剪切波速度快于垂直肌纤维方向传播的剪切波速度,剪切波的传播速度随受力的增加而变大,且...     

扩展物体漫反射光传输及成像的数值模拟研究

对扩展漫反射体的成像进行了数值模拟研究，利用近轴近似标量波动方程及其分步相屏算法，对漫反射体反射的相对于接收孔径光轴的近轴光传输及其成像进行数值模拟计算分析，结果表明该模拟算法是可行的，也对图像传输的湍流效应进行了初步计算和讨论。     

超声动态向量血流成像的产品化实现

传统超声彩色多普勒成像测量的是血流沿超声传播方向上的速度分量,故无法得到垂直于超声传播方向的血流。向量血流成像是一种更加先进的超声血流成像技术。它不受角度限制,可以直接计算出血流速度的大小和方向。本文总结了现有多种超声向量血流成像技术的特点和发展情况,并从产品化实现的角度分析了各项技术的优缺点。从超声系统发射接收、血流成像、向量速度方向合成、显示等几个方面详述了迈瑞超声向量血流成像技术产品化实现过程中遇到的主要问题及解决方案。实验采用了中科院声学所研制的超声多普勒仿血流体模,通过向量血流成像和脉冲多普勒成像分别测量体模的仿血流速度。将向量血流成像直接计算出来的速度值与脉冲多普勒经过角度校正得到的速度进行对比。在不同条件下,经过多次测量,二者的平均相对误差均在10%以内。     

基于压缩感知的差分关联成像方案研究

关联成像可提供一种运用常规手段难以获得清晰图像的方法, 能够解决一些常规成像技术不易解决的问题, 是近些年来量子光学领域的前沿和热点之一.本文提出一种基于压缩感知的差分关联成像方案(简称, 差分压缩关联成像方案), 将高斯分布的热光源强度分布作为压缩感知的测量矩阵, 差分物体信息作为被成像物体信息, 利用差分关联成像方案的高成像信噪比和压缩感知技术的低采样次数, 通过正交匹配追踪算法, 高质量地恢复出物体信息. 并以二灰度“双缝”、“NUPT”, 多灰度Lena图和Boats图为例, 数值仿真差分压缩关联成像过程; 同时将本方案350次测量的结果与差分关联成像方案30000次测量的结果进行对比, 研究结果表明针对不同的被成像物体(二灰度“双缝”、“NUPT”, 以及多灰度Lena图和Boats图), 10次成像的均方误差平均值分别降低了97.7%, 93.9%, 92.5%和71.4%; 与压缩鬼成像方案相比, 同样测量次数条件下均方误差值对于二灰度双缝和多灰度Lena图、Boats图等目标物 体分别有50.4%, 72.9%和66.8%的降低. 差分压缩关联成像方案极大地提高了成像信噪比, 降低了成像时间. 关键词： 关联成像 差分 压缩感知 均方误差     

Double-threshold technique for achieving denoising in compressive imaging applications

Single-pixel cameras, which employ either structured illumination or image modulation and compressive sensing algorithms, provide an alternative approach to imaging in scenarios where the use of a detector array is restricted or difficult because of cost or technological constraints. In this work, we present a robust imaging method based on compressive imaging that sets two thresholds to select the measurement data for image reconstruction.The experimental and numerical simulation results show that the proposed double-threshold compressive imaging protocol provides better image quality than previous compressive imaging schemes. Faster imaging speeds can be attained using this scheme because it requires less data storage space and computing time. Thus,this denoising method offers a very effective approach to promote the implementation of compressive imaging in real-time practical applications.     

Laser ultrasonic anomalous wave propagation imaging method with adjacent wave subtraction: Algorithm

The anomalous wave propagation imaging (AWPI) method is proposed for the laser ultrasonic propagation imaging system using a Q-switched laser and a laser mirror scanner to highlight the anomalies in complex structures. The AWPI algorithm was developed based on the observation that the waves from two adjacent scanning points are very similar, and that the propagation direction of the incident wave is different from that of the anomalous wave caused by structural anomalies including damage. The structural anomaly is highlighted by suppressing the incident waves and exaggerating the anomalous wave through adjacent waves subtraction after arrival time and amplitude matching. The variable time window amplitude mapping (VTWAM) method was also developed, based on the difference in arrival time between the residual incident wave and anomalous waves. The VTWAM method enhances anomaly visualization and sizing, notably for composite damages, by mapping the amplitudes of the confining wave within the damage. Our results showed that the AWPI increased the signal-to-noise ratio of a back-surface hole damage in a steel plate by 13.76 dB, while in another inspection of a composite wing with two impact damages, the AWPI results enhanced by the VTWAM compared favorably with the results of the immersion ultrasonic C-scan. The AWPI and VTWAM adopt implicit spatial referencing wherein all necessary data can be obtained through a single-time scan, therefore circumvent the disadvantages of conventional temporal baseline referencing.     

Shock wave interaction with laser-generated single bubbles

The interaction of a lithotripter shock wave (LSW) with laser-generated single vapor bubbles in water is investigated using high-speed photography and pressure measurement via a fiber-optic probe hydrophone. The interaction leads to nonspherical collapse of the bubble with secondary shock wave emission and microjet formation along the LSW propagation direction. The maximum pressure amplification is produced during the collapse phase of the bubble oscillation when the compressive pulse duration of the LSW matches with the forced collapse time of the bubble.     

Defect imaging with elastic waves in inhomogeneous-anisotropic materials with composite geometries

Imaging of defects in composite structures plays an important role in non-destructive testing (NDT) with elastic waves, i.e., ultrasound. Traditionally the imaging of such defects is performed using the synthetic aperture focusing technique (SAFT) algorithm assuming homogeneous isotropic materials. However, if parts of the structure are inhomogeneous and/or anisotropic, this algorithm fail to produce correct results that are needed in order to asses the lifetime of the part under test. Here we present a modification of this algorithm which enables a correct imaging of defects in inhomogeneous and/or anisotropic composite structures, whence it is termed InASAFT. The InASAFT is based on the exact modelling of the structure in order to account for the true nature of the elastic wave propagation using travel time ray tracing techniques. The algorithm is validated upon several numerical and real life examples yielding satisfactory results for imaging of cracks. The modified algorithm suffers, though, from the same difficulties encountered in the SAFT algorithm, namely “ghost” images and eventual lack of clear focused images. However, these artifacts can be identified using a forward wave propagation analysis of the structure.     

具有不规则自由表面的粘弹性介质中声波模拟的有限差分算法

声波在具有不规则自由表面的粘弹性介质传播的数值模拟工作在地震勘探,地震预测中非常重要,特别是当模型有起伏的自由界面和较强的衰减特性时更是如此。基于镜像方法和直接方法,本文发展了一种二维有限差分算法,可以模拟不规则自由表面引起的声波散射问题。该方法将自由表面条件与速度应力方程结合求解粘弹性波动方程,在垂直和水平自由段及拐点处设置相应的边界条件。该方法假设自由表面穿过剪切应力和相应参数的网格点。为了提高计算精度,分别计算了水平和垂直方向上应力镜像值,而对质点速度,采用先水平方向后垂直方向分析进行镜像计算和更新。将粘弹性水平自由表面镜像方法和不同倾斜度平滑自由表面的改进方法的数值结果进行对比,并验证了算法的精度。