Magnetic molecularly imprinted polymers synthesized by surface‐initiated reversible addition‐fragmentation chain transfer polymerization for the enrichment and determination of synthetic estrogens in aqueous solution

Magnetic molecularly imprinted polymers have attracted significant interest because of their multifunctionality of selective recognition of target molecules and rapid magnetic response. In this contribution, magnetic molecularly imprinted polymers were synthesized via surface‐initiated reversible addition addition‐fragmentation chain transfer polymerization using diethylstilbestrol as the template for the enrichment of synthetic estrogens. The uniform imprinted surface layer and the magnetic property of the magnetic molecularly imprinted polymers favored a fast binding kinetics and rapid analysis of target molecules. The static and selective binding experiments demonstrated a desirable adsorption capacity and good selectivity of the magnetic molecularly imprinted polymers in comparison to magnetic non‐molecularly imprinted polymers. Accordingly, a corresponding analytical method was developed in which magnetic molecularly imprinted polymers were employed as magnetic solid‐phase extraction materials for the concentration and determination of four synthetic estrogens (diethylstilbestrol, hexestrol, dienestrol, and bisphenol A) in fish pond water. The recoveries of these synthetic estrogens in spiked fish pond water samples ranged from 61.2 to 99.1% with a relative standard deviation of lower than 6.3%. This study provides a versatile approach to prepare well‐defined magnetic molecularly imprinted polymers sorbents for the analysis of synthetic estrogens in water solution.     

L-酪氨酸印迹分子的制备及性能研究

利用分子印迹技术采用传统加热法制备出酪氨酸他子印迹聚合物。用红外光谱分析了聚合物结构。研究了印迹他子与功能单体的物质的量对聚合物结合性的影响,吸收效率表征结果显示,与化学组成相同的空白聚合物相比,印迹聚合物具有更高的吸附效率。     

Preparation and evaluation of temperature and magnetic dual‐responsive molecularly imprinted polymers for the specific enrichment of formononetin

Thermo‐responsive magnetic molecularly imprinted polymers were prepared by simple surface molecular imprinting polymerization for the selective adsorption and enrichment of formononetin from Trifolium pretense by temperature regulation. Using formononetin as a template, N‐isopropylacrylamide as the thermo‐responsive functional monomer, and methacrylic acid as an assisting functional monomer, the polymers were synthesized on the surface of the magnetic substrate. The results show that imprinted polymers attained controlled adsorption of formononetin in response to the temperature change, with large adsorption capacity (16.43 mg/g), fast kinetics (60 min) and good selectivity at 35°C compared with that at 25 and 45°C. The selectivity experiment indicated that the materials had excellent recognition ability for formononetin and the selectivity factors were between 1.32 and 2.98 towards genistein and daidzein. The excellent linearity was attained in the range of 5–100 μg/mL, with low detection limits and low quantitation limits of 0.017 and 0.063 μg/mL, respectively. Furthermore, the thermo‐responsive magnetic molecularly imprinted polymers were successfully utilized for enriching and purifying formononetin from Trifolium pretense. The analytical results indicate that the imprinted polymers are promising materials for selective identification and enrichment of formononetin in complicated herbal medicines by simple temperature‐responsive regulation.     

Preparation of a multi‐hollow magnetic molecularly imprinted polymer for the selective enrichment of indolebutyric acid

A simple strategy was developed for the preparation of multi‐hollow magnetic molecularly imprinted polymers by incorporating 3‐indolebutyric acid and ferroferric oxide nanoparticles simultaneously into a poly(styrene‐co‐methacrylic acid) copolymer matrix. The as prepared absorbents were characterized using scanning electron microscopy, Fourier‐transform infrared spectroscopy and mercury porosimetry. The adsorption isotherms of indolebutyric acid revealed that there are two types of affinity binding sites in the absorbents. The apparent maximum binding capacity and dissociation constant were 17.88 mg/g and 158.7 μg/mL for high‐affinity binding sites and 9.310 mg/g and 35.04 μg/mL for low‐affinity binding sites, respectively. The results testified that multi‐hollow magnetic molecularly imprinted polymers possessed excellent recognition capacity and fast kinetic binding behavior to the objective molecules due to the high specific surface area as large as 511.3 m²/g. Recoveries of 75.5–86.8% were obtained for the indolebutyric acid spiked at three concentration levels in blank and pear samples.     

Synthesis,characterization and application of dummy-template molecularly imprinted microspheres for 2,4-d butyl ester

Dummy-template molecularly imprinted microspheres were synthesized via precipitation polymerization employing 2,4-D isooctyl ester as the template molecule instead of 2,4-D butyl ester, while methacrylic acid and divinylbenzene were used as functional monomer and cross-linker in acetonitrile or a mixture of acetonitrile and toluene. The microspheres were characterized by scanning electron microscopy, laser particle size analyzer and fourier transform infrared spectrometry. Binding capacity experiment showed that the molecularly imprinted polymers prepared in a mixture of acetonitrile and toluene had a high binding capacity. The performance of microspheres was further assessed by equilibrium binding and kinetic adsorption experiments. The results showed that the apparent maximum adsorption reached up to 1.35 mg·g^?1 within 10 min. Based on the dummy-template microspheres, a molecularly imprinted solid phase extraction-gas chromatography method was developed for the selective analysis of 2,4-D butyl ester in soil samples. The mean recoveries of 2,4-D butyl ester from blank soil samples ranged from 85.9 to 99.3% with relative standard deviations of 4.5–14.3% (n = 5). The limit of detection and the limit of quantification of 2,4-D butyl ester were 0.8 μg·kg^?1 and 2.3 μg·kg^?1, respectively.     

Synthesis of core‐shell magnetic molecularly imprinted polymer for the selective determination of imidacloprid in apple samples

This work demonstrates the synthesis and characterization of core‐shell magnetic molecularly imprinted polymers based on surface imprinting using methacryloyl chloride as a functional monomer for the selective extraction of imidacloprid (template) from apple fruit. The characterization analysis results ensured the successful synthesis of the magnetic molecularly imprinted polymers owing to their heterogeneous structure and good magnetic properties. An isothermal binding test was assessed with a pseudo‐second‐order kinetic model, and the kinetic results fit well to the Freundlich isothermal model. The polymers exhibited an adsorption capacity of 5.75 mg/g for the target analyte with a good selective extraction ability. In addition, the polymers can be reused several times without significant performance loss. The molecularly imprinted polymers showed good performance in the analysis of spiked apple sample with a linear range of 0.05–1.0 mg/L, a limit of detection of 0.048 mg/L and a limit of quantification of 0.146 mg/L (S/N = 3/10). The recoveries of the samples were 77.66–96.57% and their respective relative standard deviations were 3.36–0.45%. All the results indicated that the proposed method provided good selective extraction, as qualifying the analytical standards.     

核壳结构的萘夫西林磁性分子印迹聚合物微球的制备及性能

以表面修饰双键的Fe₃O₄@SiO₂纳米颗粒为基体,以萘夫西林(nafcillin)为模板,甲基丙烯酸(MAA)为单体,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂,偶氮二异丁腈(AIBN)为引发剂,采用三步升温聚合法合成了核壳结构的萘夫西林磁性分子印迹聚合物。采用傅里叶变换红外光谱仪(FT-IR)、透射电子显微镜(TEM)、X射线衍射仪(XRD)和振动样品磁强计(VSM)对制备的印迹聚合物微球进行了表征,得到的磁性印迹聚合物微球的粒径在320 nm左右,大小均匀,分散性较好,可以在外加磁场下与溶剂实现快速分离。对磁性印迹和非印迹聚合物进行了吸附性能研究,结果表明该印迹聚合物微球对模板分子具有很高的吸附容量(50.7 mg/g),特异性识别性能良好(印迹因子为2.46),有望应用于实际样品中萘夫西林残留量的富集分析。     

环氧功能化双功能磁性分子印迹聚合物的合成及其在多糖吸附中的应用

以淀粉为模板，以3-氨基苯硼酸（APBA）和2-丙烯酰胺-2-甲基丙磺酸（AMPS）为功能单体，以过硫酸铵（APS）为引发剂，在水溶液中成功合成了一种识别多糖的双功能分子印迹聚合物（Bi-MMIPs）。采用透射电镜、扫描电镜、傅里叶变换红外光谱等考察了Bi-MMIPs的合成效果。通过吸附试验深入研究了Bi-MMIPs对淀粉的吸附和识别特性。结果表明：Bi-MMIPs成功负载了两种功能单体，且对多糖（淀粉）具有很强的吸附亲和力和特异性识别能力，饱和吸附量达到13.88 mg/g；对于葡聚糖（M_r 5000 Da和70000 Da）的选择性系数分别为2.67和3.77；此外，Bi-MMIPs的印迹因子（α）达到了3.04，且易于再生。在机理上，APBA和AMPS分别提供可逆共价键和氢键，在合成双功能单体中表现出协同效应，可以有效改善模板分子结合位点的空间排列。     

Polydopamine‐coated magnetic molecularly imprinted polymer for the selective solid‐phase extraction of cinnamic acid,ferulic acid and caffeic acid from radix scrophulariae sample

We describe novel cinnamic acid polydopamine‐coated magnetic imprinted polymers for the simultaneous selective extraction of cinnamic acid, ferulic acid and caffeic acid from radix scrophulariae sample. The novel magnetic imprinted polymers were synthesized by surface imprinting polymerization using magnetic multi‐walled carbon nanotubes as the support material, cinnamic acid as the template and dopamine as the functional monomer. The magnetic imprinted polymers were characterized by transmission electron microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy and vibrating sample magnetometry. The results revealed that the magnetic imprinted polymers had outstanding magnetic properties, high adsorption capacity, selectivity and fast kinetic binding toward cinnamic acid, ferulic acid and caffeic acid. Coupled with high‐performance liquid chromatography, the extraction conditions of the magnetic imprinted polymers as a magnetic solid‐phase extraction sorbent were investigated in detail. The proposed imprinted magnetic solid phase extraction procedure has been used for the purification and enrichment of cinnamic acid, ferulic acid and caffeic acid successfully from radix scrophulariae extraction sample with recoveries of 92.4–115.0% for cinnamic acid, 89.4–103.0% for ferulic acid and 86.6–96.0% for caffeic acid.     

Preparation of a magnetic molecularly imprinted polymer by atom‐transfer radical polymerization for the extraction of parabens from fruit juices

A silica‐based surface magnetic molecularly imprinted polymer for the selective recognition of parabens was prepared using a facile and general method that combined atom‐transfer radical polymerization with surface imprinting technique. The prepared magnetic molecularly imprinted polymer was characterized by transmission electron microscopy, Fourier transform infrared spectrometry and physical property measurement. The isothermal adsorption experiment and kinetics adsorption experiment investigated the adsorption property of magnetic molecularly imprinted polymer to template molecule. The four parabens including methylparaben, ethylparaben, propylparaben, and butylparaben were used to assess the rebinding selectivity. An extraction method, which used magnetic molecularly imprinted polymer as adsorbents coupled with high‐performance liquid chromatography for the determination of the four parabens in fruit juice samples was developed. Under the optimal conditions, the limits of detections of the four parabens were 0.028, 0.026, 0.021, and 0.026 mg/L, respectively. The precision expressed as relative standard deviation ranging from 2.6 to 8.9% was obtained. In all three fortified levels, recoveries of parabens were in the range of 72.5–89.4%. The proposed method has been applied to different fruit juice samples including orange juice, grape juice, apple juice and peach juice, and satisfactory results were obtained.     

Adsorption of carbaryl using molecularly imprinted microspheres prepared by precipitation polymerization

To obtain the desired specific adsorbents for carbaryl to enrichment, separation, and analysis of trace pesticide residues in environmental water, molecularly imprinted polymer (MIP) microspheres were prepared by precipitation polymerization using carbaryl, methacrylic acid (MAA), ethylene glycol dimethacrylate (EGDMA), azobisisobutyronitrile (AIBN), and acetonitrile as template, functional monomer, cross‐linker, initiator, and porogen, respectively. Molecular modeling software was used to compute rational interaction between the template molecule and function monomer. The adsorption properties of carbaryl in acetonitrile for imprinted microspheres were evaluated by equilibrium rebinding experiments. Scatchard plot analysis revealed that there was one class of binding sites populated in the imprinted polymer microspheres with dissociation constants of 3.3 × 10^?2 mol/l and an apparent maximum number of 1.95 µmol/g. The specificity of the imprinted microspheres was investigated by binding analysis using carbaryl and structurally related carbamate pesticides. The results indicated that the obtained imprinted microspheres showed a good selectivity for carbaryl. Copyright © 2007 John Wiley & Sons, Ltd.     

Dual‐template magnetic molecularly imprinted particles with multi‐hollow structure for the detection of dicofol and chlorpyrifos‐methyl

In this work, a novel dual‐template magnetic molecularly imprinted polymer particle for dicofol and chlorpyrifos‐methyl was prepared through oil‐in‐water emulsifier‐free emulsion technology. The resulting magnetic particles were characterized with electron microscopy, Fourier transform infrared spectroscopy, and X‐ray diffraction. It was found that as‐prepared particles were well‐shaped spheres with multi‐hollow structures and of a size around 125 μm. Meanwhile it showed a good magnetic sensitivity. The results testified that multi‐hollow magnetic molecularly imprinted polymers possessed excellent recognition capacity and fast kinetic binding behavior to the objective molecules. The maximum binding amounts toward dicofol and chlorpyrifos‐methyl were 31.46 and 25.23 mg/g, respectively. The feasibility of the use of the particles as a solid‐phase extraction sorbent was evaluated. Satisfactory recoveries ranging from 90.62 to 111.47 and 91.07 to 94.03% were obtained for dicofol and chlorpyrifos‐methyl, respectively, spiked at three concentration levels from real samples. The Langmuir isotherm equation provided an excellent fit to the equilibrium sorption data of either dicofol or chlorpyrifos‐methyl. It provided a novel way to advise dual‐template magnetic molecularly imprinted polymer particles to adsorb pesticides with high selectivity.     

Synthesis and characterization of molecularly imprinted polymers for recognition of ciprofloxacin

A molecularly imprinted polymer (MIP), with special molecule recognition properties of ciprofloxacin (CIP), was prepared by thermal polymerization in which ciprofloxacin acted as template molecule, α-methacrylic acid (MAA) acted as functional monomer and trimethylolpropane trimethylacrylate (TRIM) acted as crosslinker. The optimized ratio was determined to be n(CIP): n (MMA):n(TRIM)51:6:16 by investigation of the effects of different concentrations of functional monomer and the crosslinker on the MIP’s recognition properties. Equilibrium binding experiment was used to investigate the adsorption dynamics, the binding ability to template molecule and the substrate selectivity. Scatchard analysis was used to study the MIP’s binding characteristic to template molecule. The results indicated that MIP has higher adsorption ability and selectivity. The equilibrium distribution coefficient K _D was 41.64 and the separation factor α was 1.62. Scatchard analysis showed that two different kinds of binding sites were produced in the polymer matrix and their dissociation constants were calculated to be K _d1 = 5.249 × 10⁻⁵ mol·L⁻¹, K _d2 = 2.237 × 10⁻³ mol·L⁻¹. __________ Translated from Chemistry, 2008, 71(2): 132–137     

Photo‐stimulated “turn‐on/off” molecularly imprinted polymers based on magnetic mesoporous silicon surface for efficient detection of sulfamerazine

In this study, novel photo‐stimulated molecularly imprinted polymers based on magnetic mesoporous carrier surface were developed for selective identification and intelligent separation of sulfamerazine in complex samples. The photosensitive monomer of the molecularly imprinted polymers was azobenzene derivative 5‐[(4‐(methacryloyloxy)phenyl) diazenyl] isophthalic acid with stimulus reaction mechanisms, which has photoisomerization between trans and cis for N=N bonds. Further, the properties of the photo‐stimulated molecularly imprinted polymers were further evaluated through several sets of adsorption experiments. It illustrated that the maximum adsorption amount is 0.45 mmol/L. By ultraviolet spectrophotometry, the material reaches typical characteristic peaks of photo sensitivity, and the cycle time is 16 min. Three adsorption and desorption processes were repeated, the adsorption rate reached 34.4%. Overall, the photo‐stimulated molecularly imprinted polymers can enrich and separate determine sulfamerazine with high selectivity, which have good recovery for real samples.     

Rapid measurements of curcumin from complex samples coupled with magnetic biocompatibility molecularly imprinted polymer using electrochemical detection

Curcumin widely exists in food, and rapid selective and accurate detection of curcumin have great significance in chemical industry. In this experiment, a new magnetic biocompatibility molecularly imprinted polymer was prepared with nontoxic and biocompatible Zein to adsorb curcumin selectively. The polymer has high biocompatibility, good adsorption capacity, and specific adsorption for curcumin. Combined with portable electrochemical workstations, the polymer can be used to detect curcumin rapidly and cost‐effectively. Using curcumin as a template and Zein as the crosslinking agent, the polymers were synthesized on the surface of Fe₃O₄ particles for solid phase extraction. The experimental results showed that the polymer reached large adsorption capacity (32.12 mg/g) with fast kinetics (20 min). The adsorption characteristic of the polymer followed the Langmuir isotherm and pseudo‐second‐order kinetic models. Hexacyanoferrate was used as electrochemical probe to generate signals, and the linear range was 5–200 µg/mL for measuring curcumin. The experimental analysis showed that the polymer was an ideal material for selective accumulation of curcumin from complex samples. This approach has been successfully applied to the determination of curcumin in food samples with electrochemical detection, indicating that this is a feasible and practical technique.     

Novel molecularly imprinted magnetic nanoparticles for the selective extraction of protoberberine alkaloids in herbs and rat plasma

In this work, a novel magnetic nanomaterial functionalized with a molecularly imprinted polymer was prepared for the extraction of protoberberine alkaloids. Molecularly imprinted polymers were made on the surface of Fe₃O₄ nanoparticles by using berberine as template, acetonitrile/water as porogen, acrylamide as functional monomer and ethylene glycol dimethacrylate as cross‐linker. The optimized molar ratio of template/functional monomer was 1:7. The polymeric magnetic nanoparticles were characterized by transmission electron microscopy and Fourier transform infrared spectroscopy. The stability and adsorption capacity of the molecularly imprinted polymers were investigated. The molecularly imprinted polymers were used as a selective sorbent for the magnetic molecularly imprinted solid‐phase extraction and determination of jatrorrhizine, palmatine, and berberine. Extraction parameters were studied including loading pH, sample volume, stirring speed, and extraction time. Finally, a magnetic molecularly imprinted solid‐phase extraction coupled to high‐performance liquid chromatography method was developed. Under the optimized conditions, the method showed good linear range of 0.1–150 ng/mL for berberine and 0.1–100 ng/mL for jatrorrhizine and palmatine. The limit of detection was 0.01 ng/mL for berberine and 0.02 ng/mL for jatrorrhizine and palmatine. The proposed method has been applied to determine protoberberine alkaloids in Cortex phellodendri and rat plasma samples. The recoveries ranged from 87.33–102.43%, with relative standard deviation less than 4.54% in Cortex phellodendri and from 102.22–111.15% with relative standard deviation less than 4.59% in plasma.     

Magnetic molecularly imprinted polymer for the efficient and selective preconcentration of diazinon before its determination by high‐performance liquid chromatography

A molecularly imprinted polymer was selectively applied for solid‐phase extraction and diazinon residues enrichment before high‐performance liquid chromatography. Diazinon was thermally copolymerized with Fe₃O₄@polyethyleneglycol nanoparticles, methacrylic acid (functional monomer), 2‐hydroxyethyl methacrylate (co‐monomer), and ethylene glycol dimethacrylate (cross‐linking monomer) in the presence of acetonitrile (porogen) and 2,2‐azobisisobutyronitrile (initiator). Then, the imprinted diazinon was reproducibly eluted with methanol/acetic acid (9:1, v/v). The sorbent particles were characterized by X‐ray diffraction, Fourier transform infrared spectroscopy, and scanning electron microscopy. The comprehensive study of variables through experimental design showed that the maximum performance was achieved under these conditions: pH 7, 10 mL sample volume, 15 mg sorbent, 10 min vortex time, 5 min ultrasonic time, 200 μL methanol/acetic acid (9:1, v/v) as eluent, and 5 min desorption time. Under optimized conditions, the molecularly imprinted polymer solid‐phase extraction method demonstrated a linear range (0.02–5 g/mL), a correlation coefficient of 0.997, and 0.005 g/mL detection limit.     

Selective extraction of morphine from biological fluids by magnetic molecularly imprinted polymers and determination using UHPLC with diode array detection

The determination of morphine concentration in the blood and urine is necessary for patients and recruitment purposes. Herein, a magnetic molecularly imprinted polymer for selective and efficient extraction of morphine from biological samples was synthesized by using a core–shell method. Fe₃O₄ nanoparticles were coated with SiO₂‐NH₂. The molecularly imprinted polymer was coated on the Fe₃O₄/SiO₂‐NH₂ surface by the copolymerization of methacrylic acid and ethylene glycol dimethacrylate in the presence of morphine as the template molecule. The morphological and magnetic properties of the polymer were investigated. Field‐emission scanning electron microscopy indicated that the prepared magnetic polymer is almost uniform. The saturation magnetization values of Fe₃O₄ nanoparticles, Fe₃O₄/SiO₂‐NH₂, and the magnetic polymer were 48.41, 31.69, and 13.02 emu/g, respectively, indicating that all the particles are superparamagnetic. Kinetics of the adsorption of morphine on magnetic polymer were well described by second‐order kinetic and adsorption processes and well fitted by the Langmuir adsorption isotherm, in which the maximum adsorption capacity was calculated as 28.40 mg/g. The recoveries from plasma and urine samples were in the range of 84.9–105.5 and 94.9–102.8%, respectively. By using the magnetic molecularly imprinted polymer, morphine can selectively, reliably, and in low concentration be determined in biological samples with high‐performance liquid chromatography and UV detection.     

Preparation of bio‐based keratin‐derived magnetic molecularly imprinted polymer nanoparticles for the facile and selective separation of bisphenol A from water

In this study, new bio‐based magnetic molecularly imprinted polymer nanoparticles (∼23 nm) were synthesized from keratin extracted from chicken feathers and methacrylate‐functionalized Fe₃O₄ nanoparticles for its potential application in separation and removal of bisphenol A from water. The prepared magnetic molecularly imprinted polymer was characterized by Fourier‐transform infrared spectroscopy, field‐emission scanning electron microscopy, thermogravimetric analysis, alternative gradient field magnetometry, and energy‐dispersive X‐ray spectroscopy. The sorption of bisphenol A was investigated by changing the influencing factors such as pH, immersion time, Fe₃O₄ nanoparticles dosage, and the initial concentration of bisphenol A. Results illustrated that sorption was very fast and efficient (Q_m = 600 mg/g) having a removal efficiency of ∼98% in 40 min of immersion. The adsorption process showed better conformity with the Weber−Morris kinetics and the Freundlich isotherm model. The selectivity of bisphenol A by adsorbent was checked in the presence of hydroquinone, phenol, tetrabromobisphenol, and 4,4′‐biphenol as interferences.     

Synthesis of molecularly imprinted polymer adsorbents for solid‐phase extraction of strobilurin fungicides from agricultural products

Molecularly imprinted polymers for strobilurin fungicides were prepared by precipitation polymerization employing azoxystrobin as template molecular together with methacrylic acid monomer and trimethylolpropane triacrylate cross‐linker. Morphological characterization showed molecularly imprinted polymers were uniform spherical particles with about 0.2 μm in diameter, while the morphologies of nonimprinted polymers were irregular bulk. The equilibrium binding and selective experiments proved that molecularly imprinted polymers possessed a higher affinity toward four fungicides compared to nonimprinted polymers and heterogeneous binding sites were found in the molecularly imprinted polymers. Molecularly imprinted solid‐phase extraction conditions, including sample loading solvents, selective washing, and elution solvents, were carefully optimized. The developed method showed good recoveries (70.0–114.0%) with relative standard deviations in range of 1.0–9.8% (n  =  3) for samples (cucumber and peach) spiked at three different levels (10, 50, and 100 μg/ kg). The detection limit (signal/noise = 3) ranged from 0.01 to 0.08 μg/kg. The results demonstrated good potential use of this convenient and highly efficient method for determining trace strobilurin fungicides in agricultural products.