Analysis of intact heparin by capillary electrophoresis using short end injection configuration

A capillary electrophoresis method for the analysis of intact heparin was developed using a phosphate buffer and a fused silica capillary. Operational parameters such as pH and concentration of the running buffer were investigated. The short end injection configuration permitted a gain on peak efficiency, on the analysis time and on the repeatability of both migration times and peak areas, through a reduction of the migration distance. Moreover, the beneficial effect of the presence of sodium chloride in the heparin sample on the peak efficiency was demonstrated and the influence of the salts on the conformation of the heparin was discussed. The optimized method (short end injection configuration, 50mM phosphate buffer pH 3, heparin sample prepared in 10 g/L NaCl solution) was validated in terms of linearity, reproducibility and specificity according to ICH requirements.     

Analysis of the disaccharides derived from hyaluronic acid and chondroitin sulfate by capillary electrophoresis with sample stacking

CE conditions for monitoring the unsaturated disaccharides of hyaluronic acid (di-HA) and chondroitin sulfate (di-CS) using an alkaline tetraborate buffer, electrokinetic sample injection, and UV absorption detection at 232 nm are reported. Separations were performed in an uncoated fused-silica capillary having reversed polarity and reversed electroosmosis generated with the addition of CTAB to the buffer. The influence of various separation parameters, including the concentration of CTAB, buffer pH, concentration of tetraborate, and applied voltage, on the resolution of the two disaccharides was investigated. Baseline separation was obtained with 25 mM tetraborate at pH 10.0 and having 0.05 mM CTAB. Chloride and phosphate in the sample are beneficial for the stacking of the disaccharides, with di-HA forming a much sharper peak than di-CS. Using samples prepared in 25 mM Tris-HCl (pH 7.5) and electrokinetic injection at the cathode at -10 kV for 40 s, linear relationships between the corrected peak area and the concentration of the disaccharides have been found in the ranges of 1.0-400.0 and 0.1-1.0 microg/mL (0.2-1.0 microg/mL for di-CS), with correlation coefficients being >0.9933 in all cases. The RSDs of detection times and corrected peak areas were between 1.13-1.24 and 1.57-2.13%, respectively. Applied to human serum samples that were prepared by ethanol precipitation and depolymerization of the two polysaccharides with chondroitinase ABC reveals comigration of endogenous compounds with di-HA and a sample-dependent detection time. The di-HA content in the serum sample can be estimated via subtraction of the blank peak that is obtained without enzymatic hydrolysis.     

A rapid urine creatinine assay by capillary zone electrophoresis.

Using capillary zone electrophoresis, the urine creatinine (uCr) assay was validated in extemporaneous diluted urine, both in healthy subjects and athletes, with the uCr concentration as a reference value to compare excretion rates of other metabolites in the same samples. The electrokinetic sample injection was carried out at 10 kV per 10 s; UV absorbance detection was at 254 nm. Using standard samples, the creatinine migration mean time in 100 mmol/L acetate buffer, pH 4.4, was 3.3+/-0.2 min; the repeatability for absolute migration mean time was 0.6% and peak height repeatability was 2.9%. The correlation coefficient of the standard curve was r = 0.999 and the detection limit was 23.1 micromol/L. Intra- and interassay coefficients of variation (CV) were 3.0 and 3.6%, respectively; recovery was 99+/-3% and linearity was r= 0.98. Normal urine samples were diluted 1:80 in run buffer. The present CE urine creatinine assay showed a good correlation with HPLC and with Jaffe methods (r = 0.98 and r = 0.97, respectively; p < 0.0001). The uCr in the morning urine samples of 34 healthy males (M), 38 healthy females (F), and 83 male athletes (A) was 10.4+/-6.1 mmol/L, 10.8+/-8.1 mmol/L and 13.2+/-6.5 mmol/L, respectively. The uCr difference (p < 0.02) between M and A and a correlation (p < 0.05) with age in A were observed.     

Quantitative determination of clenbuterol, salbutamol and tulobuterol enantiomers by capillary electrophoresis

Enantiomers of clenbuterol, salbutamol and tulobuterol were directly separated and quantitated from a spiked sample by capillary electrophoresis (CE) using sulfated β-cyclodextrin (SCD) as chiral selector and phosphate as running buffer. The SCD and buffer concentration, pH and field strength were the parameters studied to optimize the separation. Optimal separation was obtained using 50 mM of phosphate monobasic at pH = 2.24, 0.25% (w/w) of sulfated cyclodextrin and a field strength of 10 kV, with 20 min total time analysis. Comparison between two different injection modes (hydrodynamic and electrokinetic) was made. In the hydrodynamic mode, repeatability (expressed as relative standard deviation, RSD) was less than 1.2% for migration times for all the analyte peaks and less than 2% for peak area percentages. With respect to reproducibility, RSD was less than 3.8% for migration time and less than 3% for peak area percentages. Calibration curves were set up for two different sample concentration ranges (1 to 10 μg mL^–1 and 160– 800 ng mL^–1, of each of the racemates studied). Although the electrokinetic injection mode for an aqueous sample appeared to suffer from some enantiodiscrimination, calibration curves were linear in the range between 1 and 10 ng mL^–1 with regression coefficients ranging from 0.9996 to 0.9952. As in the case of hydrodynamic injection, the method was tested with a spiked sample.     

Capillary electrophoretic analysis of inorganic anions in atmospheric hailstone samples

Micellar electrokinetic capillary chromatography (MEKC) coupled with sample stacking and polarity switching was investigated for the determination of Viagra (sildenafil citrate, SC) and its metabolite (UK-103,320, UK) in human serum in the concentration range of clinical interest. Human serum samples spiked with SC and UK were eluted with methanol from a C18 cartridge, the extract was evaporated and regenerated in a solution that contained 1 mM phosphate buffer (pH 12.3) and 20% methanol. The MEKC separation was performed using an injection time of 275 s, a polarity switching time of 93 s, a phosphate buffer, (pH 12.3, 15 mM) containing 25 mM sodium dodecyl sulfate as separation electrolyte and a fused-silica capillary. The analysis takes about 6 min and gives satisfactory inter-day precision with respect to migration times and linear responses over the 80-900 ng/ml concentration range investigated for SC and UK. Intra-day RSDs (n=4 graphs) for the slopes of the calibration graphs were 4.86% for SC and 3.50% for UK. Inter-day RSDs for the slopes were 4.37% for SC and 5.39% for UK. Detection limits (S/N=3) were about 17 ng/ml for both compounds in human serum. A 1-ml volume of blood serum was necessary to do this determination.     

Quantitative determination of clenbuterol, salbutamol and tulobuterol enantiomers by capillary electrophoresis

Enantiomers of clenbuterol, salbutamol and tulobuterol were directly separated and quantitated from a spiked sample by capillary electrophoresis (CE) using sulfaited beta-cyclodextrin (SCD) as chiral selector and phosphate as running buffer. The SCD and buffer concentration, pH and field strength were the parameters studied to optimize the separation. Optimal separation was obtained using 50 mM of phosphate monobasic at pH = 2.24, 0.25% (w/w) of sulfated cyclodextrin and a field strength of 10 kV, with 20 min total time analysis. Comparison between two different injection modes (hydrodynamic and electrokinetic) was made. In the hydrodynamic mode, repeatability (expressed as relative standard deviation, RSD) was less than 1.2% for migration times for all the analyte peaks and less than 2% for peak area percentages. With respect to reproducibility, RSD was less than 3.8% for migration time and less than 3% for peak area percentages. Calibration curves were set up for two different sample concentration ranges (1 to 10 microg mL(-1) and 160-800 ng mL(-1), of each of the racemates studied). Although the electrokinetic injection mode for an aqueous sample appeared to suffer from some enantiodiscrimination, calibration curves were linear in the range between 1 and 10 ng mL(-1) with regression coefficients ranging from 0.9996 to 0.9952. As in the case of hydrodynamic injection, the method was tested with a spiked sample.     

A novel LIF-CE method for the separation of hyaluronan- and chondroitin sulfate-derived disaccharides: Application to structural and quantitative analyses of human plasma low- and high-charged chondroitin sulfate isomers

The report describes a rapid and simple CE method using LIF detection for the analysis of unsaturated disaccharides obtained from enzymatic depolymerization of plasma chondroitin sulfate (CS) isomers. The disaccharide reducing groups were labeled with 2-aminoacridone (AMAC). The fluorotagged products can be separated by reversed-polarity CE using a sodium acetate buffer, pH 3.8, in the presence of 0.05% methylcellulose. The choice of the appropriate electrophoretic conditions was performed after a deep analysis of the most important parameters affecting analyte separation. In particular, the effect of both run buffer concentration and pH on resolution, efficiency, migration times, and peak area was evaluated. The selected electrophoretic conditions allowed us to separate the CS isomers-derived Delta-disaccharides in less than 12 min, also resolving the nonsulfated disaccharides released from CS isomers from those released from hyaluronan (HA). Moreover, these conditions gave a good reproducibility of both the migration times (CV%, 0.25) and the peak areas (CV%, 1.4). Intra- and interassay CV were 5.37 and 7.23%, respectively, and analytical recovery was about 86%. The applicability of the above method to the quantitative and structural disaccharide analyses of plasma CS isomers was investigated. Data obtained from 44 healthy human subjects were compared with those obtained by a fluorophore-assisted carbohydrate electrophoresis (FACE) reference assay, by using the Passing and Bablok regression and Bland-Altman tests. The developed method could represent a good tool for an ultrasensitive analysis of CS isomers in biological samples from different sources, particularly when samples are available in very low amounts.     

Separation and Migration Behavior of Benzophenones in Capillary Zone Electrophoresis

The migration behavior and separation of eight benzophenones selected were investigated by capillary zone electrophoresis in the range of pH 7.5–11.5. The effect of buffer pH, the types of buffer electrolyte, and the concentration of phosphate‐borate buffer on the separation and selectivity of benzophenones selected were examined. Better separability can be obtained with phosphate‐borate buffer than with phosphate buffer or borate buffer at around pH 9.2. Baseline separation of eight benzophenones could be simultaneously and successfully achieved with an appropriate choice of buffer pH and the concentration of phosphate‐borate buffer in capillary zone electrophoresis. The migration order of benzophenones selected could be explained on the basis of the degree of ionization and molecular mass.     

Development of a capillary electrophoresis method for the enantioselective estimation of primaquine in pharmaceutical formulations

A capillary electrophoresis (CE) method has been developed that allows the separation and estimation of primaquine enantiomers using hydroxypropyl-gamma-cyclodextrin (HP-gamma -CD) as a chiral selector. The influence of chemical and instrumental parameters on the separation, such as type and concentration of CD, buffer concentration, buffer pH, applied voltage, capillary temperature, and injection time, were investigated. Good separation of the racemic mixture of primaquine was achieved using a fused-silica capillary (52.5 cm effective length x 50 microm id) and a background electrolyte composed of tris-phosphate buffer solution (50 mM, pH 2.5) containing 15 mM HP-gamma-CD as a chiral selector. The recommended applied voltage, capillary temperature, and injection time were 15 kV, 25 degrees C, and 6 s, respectively. Within-day and interday reproducibility of peak area and migration time gave relative standard deviation values ranging from 1.05-3.30%. Good recoveries (range of 96.8-104.9%) were obtained from the determination of placebos that were spiked with 0.25-1.00 mg/L primaquine. The proposed CE method was successfully applied to the assay of primaquine diphosphate in pharmaceutical formulations (tablets).     

Determination of Dexamethasone in Cosmetics by MEKC

A rapid and reliable method based on micellar electrokinetic capillary chromatography has been developed for the determination of dexamethasone in cosmetics. Effects of buffer composition, concentration and pH, the detection wavelength, separation voltage, and injection time were systematically investigated. The optimum conditions were: 30 mM borax buffer containing 20 mM sodium dodecyl sulfate at pH 9.0, detection at 254 nm, injection time 10 s at a height of 10 cm, and a separation voltage of 15 kV. Under these conditions, the analysis of dexamethasone in cosmetics was carried out within 6 min. The method was validated for stability, precision, linearity and accuracy. Excellent linearity was obtained in the range of 50–1,000 μg mL⁻¹, and acceptable precision, in intra-day and inter-day analysis, was also obtained with relative standard deviation in the range of 0.19–0.86 and 2.50–4.90% for migration time and peak area ratio, respectively. The method was used to analyse eight cosmetic samples purchased locally.     

Electrochemical Detection of Methimazole by Capillary Electrophoresis at a Carbon Fiber Microdisk Electrode

We developed a sensitive, simple and low cost method to determine methimazole based on capillary electrophoresis with electrochemical detection (CE‐EC) at a carbon fiber microdisk electrode (CFE). We investigated the effects of detection potential, the concentration and pH value of the phosphate buffer, and injection time as well as separation voltage on the detection of methimazole. Under the optimized conditions: the detection potential at 1.30 V, 10 mmol/L phosphate buffer (pH 7.0), injection time 30 s at a height of 20 centimeter and separation voltage at 15 kV, the linear range was obtained from 1.0×10^?7 to 2.0×10^?4 mol/L, covering 3 orders of magnitude with a correlation coefficient of 0.9995. The LOD (S/N=3) obtained was 5.0×10^?8 mol/L. The RSD of migration time and peak current for 2.0×10^?4 mol/L methimazole was 1.04% and 1.54% (n=10), respectively. The method was also used to analyze methimazole tablets and human urine sample.     

Adjusting the selectivity of inorganic anion separation by capillary electrophoresis

The separation of the principal inorganic anions (bromide, carbonate, chlorate, chloride, fluoride, nitrate, nitrite, sulfate, phosphate) has been achieved using a capillary electrophoresis system with indirect UV detection at 260 nm. Several types of cationic surfactants (quaternary ammonium, phosphonium or methonium) were tested as electroosmotic flow modifiers and added to a chromatebased buffer prepared from potassium dichromate. The influence of many physicochemical parameters such as nature and concentration of cationic surfactant, buffer pH, dichromate concentration buffer, voltage and temperature upon the migration time of an analyte anion, peak efficiency, asymmetry factor, and finally resolution has been investigated. A linear relationship between the corrected area and the anion concentration in the 2.5–50 ppm range was obtained, thus allowing the quantitative analysis of anions in mineral water. Finally, by increasing the hydrodynamic injection time, the separation of inorganic anions at a low concentration level of 50 ng/ml was achieved without any loss of resolution.     

Determination of histamine and histidine by capillary zone electrophoresis with pre-column naphthalene-2,3-dicarboxaldehyde derivatization and fluorescence detection

A rapid and sensitive method was developed for the simultaneous determination of histamine and histidine by capillary zone electrophoresis with lamp-induced fluorescence detection. A fluoregenic derivatization reagent, naphthalene-2,3-dicarboxaldehyde (NDA) was successfully applied to label the histamine and histidine respectively. The derivatization conditions and separation parameters including pH and concentration of electrolyte and sample injection were optimized in detail. The optimal derivatization reaction was performed with 1.0 mM NDA, 20 mM NaCN, and 20 mM borate buffer, pH 9.1 for 15 min. The separation of NDA-tagged histamine and histidine could be achieved in less than 200 s with 40 mM phosphate buffer (pH 5.8) as the running buffer. The detection limits for histamine and histidine were 5.5 x 10(-9) and 3.8 x 10(-9) M, respectively (S/N = 3). The relative standard derivations for migration time and peak height of derivatives were less than 1.5 and 5.0%, respectively. The method was successfully applied to the analysis of histamine and histidine in the P815 mastocytoma cells and the beer samples.     

Simultaneous multiresponse optimization applied to epinastine determination in human serum by using capillary electrophoresis

Experimental design and optimization techniques were implemented for the development of a rapid and simple capillary zone electrophoresis method (CZE) for the determination of epinastine hydrochloride in human serum. The effects of five factors were studied on the resolution between the peaks for the target analyte (epinastine hydrochloride) and lidocaine hydrochloride, used as internal standard, as well as on the analysis time. The factors were the concentration and pH of the buffer, the injection time, the injection voltage and the separation voltage. The separation was carried out by using an uncoated silica capillary with 50 microm i.d. and total length 64.5 cm (150 microm of path length) and UV detection (200 nm). Multiple response simultaneous optimization by using the desirability function was used to find experimental conditions where the system generates desirable results. The optimum conditions were: sodium phosphate buffer solution, 16.0 mmol L(-1); pH 8.50; injection voltage, 20.0 kV; injection time, 30 s; separation voltage, 26.7 kV. The method was confirmed to be linear in the range of 2.0-12 ng mL(-1). The injection repeatability of the method was evaluated by six injections at three concentration levels, while intra-assay precision was assessed by analysing a single concentration level, yielding a CV's of ca. 1% for standard and 2% for serum samples. Accuracy was evaluated by recovery assays and by comparing with an HPLC method, the results being acceptable according to regulatory agencies. The rudgeness was evaluated by means of an experimental Plackett-Burman design, in which the accuracy was assessed when small changes were set in the studied parameters. Clean-up of human serum samples was carried out by means of a liquid-liquid extraction procedure, which gave a high extraction yield for epinastine hydrochloride (93.00%).     

Development of a fast capillary electrophoresis method for determination of creatinine in urine samples

The aim of this work was to develop a fast method using capillary electrophoresis for the determination of creatinine in human urine samples. The pH and constituents of the background electrolyte were selected by inspection of effective mobility of creatinine and candidate urine interferents versus pH curves. The tendency of the analyte to undergo electromigration dispersion and the buffer capacity were evaluated by the Peakmaster software and considered in the optimization of the background electrolyte, composed by 10 mmol L(-1) tris(hydroxymethyl)aminomethane and 20 mmol L(-1) 2-hydroxyisobutyric acid (HIBA) at pH 3.93. Separation was conducted in a fused-silica capillary (32 cm total length and 8.5 cm effective length, 50 microm I.D.), with short-end injection configuration and direct UV detection at 215 nm. The migration time of creatinine was only 22s. A few figures of merit of the method are as follows: good linearity in the concentration interval of 5-70 mg L(-1) (R(2)>0.99), limit of detection of 0.5 mg L(-1), inter-day precision better than 2.7% (n=9) and recovery in the range 99.0-103.7% at three concentration levels (50, 100 and 150 mg L(-1)). Urine samples were prepared by deproteination with acetonitrile (1:3 sample:acetonitrile, v/v), centrifugation and dilution of a deproteinated aliquot with 12.5 mmol L(-1) HIBA (1:4, v/v). Creatinine concentrations between 489 and 1063 mg L(-1) were obtained in the urine of four healthy volunteers.     

Separation of phenolic acids in soil and plant tissue extracts by co-electroosmotic capillary electrophoresis with direct UV detection

Summary A capillary zone electrophoretic method for the analysis of phenolic acids in soil and plant extracts was developed with direct UV detection using a phosphate electrolyte solution. The electrophoretic separation required the phenolic acids to be charged at a pH above their pKa in order to achieve their migration towards the anode. Electroosmotic flow (EOF) was reversed in direction by adding tetradecyltrimethylammonium bromide (TTAB). Factors affecting the separation selectivity, including the buffer pH and EOF modifiers, were investigated systematically. Eight phenolic acids were separated and detected in 10 min using an electrolyte containing 25 mM phosphate, 0.5 mM TTAB and 15% acetonitrile (v/v) at pH of 7.20. Linear plots for the test phenolic acids were obtained in a concentration range of 0.01–1 mM with detection limits in the range of 1.0–7.0 μM. The recoveries ranged from 92.8 to 102.3% in soil and plant tissues samples spiked at 100 μM and the relative standard deviation based on the peak area were ranged 2.0 to 4.5%. The proposed method was used for the determination of phenolic acids in plant tissue and soil extracts with direct injection.     

Glucose in human serum determined by capillary electrophoresis with glucose micro-biosensor

A glucose micro-biosensor was employed as detector in capillary electrophoresis (CE) for determining the concentration of glucose in human serum. The micro-biosensor was based on the immobilization of the SWNTs-glucose oxidase-chitosan biocomposite at a platinized Au electrode by electrodeposition. The influencing factors including separation voltage, detection potential, pH value, and the concentration of the buffer were studied. Suitable conditions were obtained for the determination of glucose: running buffer, 25 mM PBS (pH 8.0); separation field strength, 250 V cm(-1); detection potential, 0.80 V vs. saturated calomel electrode. Under optimized detection conditions, glucose responded linearly from the range of 5 μM to 1 mM with a correlation coefficient of 0.9986 for the injection voltage of 5.0 kV and injection time of 10 s. The concentration limit of detection of the method was 1 μM (S/N = 3). The micro-biosensor exhibited good stability and durability in the analytical procedures. The relative standard deviation of the migration time and peak current were 1.7% and 2.6%, respectively. Glucose in human serum from two healthy individuals and two diabetics was successfully determined, giving a good prospect for a new clinical diagnostic instrument.     

Assay of melamine in milk products with a pH‐mediated stacking technique in capillary electrophoresis

A pH‐mediated stacking method in capillary electrophoresis as an assay for low concentrations of melamine in milk products was established. Real samples were treated with acetone and sodium acetate and injected directly after centrifugation and filtration. Several experimental factors, such as buffer pH, buffer concentration, sample matrix, injection/sweeping ratio, sweeping time/voltages, separation voltages, as well as sample pretreatment, which affected stacking and separation, were investigated and optimized. Under the selected condition, a low LOD of 0.01 μmol/L (S/N = 5) and a wide range of linearity of 0.01～1.0 μmol/L could be easily achieved with a good reproducibility (RSDs < 5.8% for both migration time and peak area) and an acceptable recovery of 94.0～103.2% (for milk, infant formula, yogurt, and milk products). The proposed method was suitable for routine assay of melamine in real milk samples.     

Direct chiral resolution of lactic acid in food products by capillary electrophoresis

Chiral resolution of native DL-lactic acid was performed by capillary electrophoresis using 2-hydroxypropyl-beta-cyclodextrin as a chiral selector. Various factors affecting chiral resolution, migration time, and peak area of lactic acid were studied. The running conditions for optimum separation of lactic acid were found to be 90 mM phosphate buffer (pH 6.0) containing 240 mM 2-hydroxypropyl-beta-cyclodextrin with an effective voltage of -30 kV at 16 degrees C, using direct detection at 200 nm. In order to enhance the sensitivity, sample injection was done under a pressure of 50 mbar for 200 s. On-line sample concentration was accomplished by sample stacking. With this system, D- and L-lactic acids in food products were analyzed successfully.     

Simultaneous determination of citrulline and arginine in human blood plasma by capillary electrophoresis with ultraviolet absorption detection

A new capillary electrophoresis method to measure human blood plasma arginine and citrulline levels in a single run without derivatization was established. After adding homoarginine as internal standard, plasma proteins were removed by a 90:10 v/v acetonitrile/ammonia mixture. Arginine and citrulline were detected by an ultraviolet detector at 190 nm and separated in 11.65 and 20.43 min, respectively, by using a 75 mmol/L Tris phosphate solution at pH 1.2 as a background electrolyte. Limits of detection were 0.8 and 5 μmol/L for arginine and citrulline, respectively. Precision tests indicated a good repeatability of migration times and of peak area both for citrulline (CV% = 0.82 and 3.19) and arginine (CV% = 0.65 and 2.79). The CV% for intra‐ and interassay tests were, respectively, 1.84 and 3.23 for citrulline and 1.25 and 1.50 for arginine. Mean recovery was 101.5 and 98.5% for citrulline and arginine, respectively. The performance of the developed method was assessed by measuring plasma arginine levels in 52 subjects and the data were compared with those obtained by our previous assay. The new method was then applied to assess plasma citrulline and arginine in ten chronic kidney disease patients under hypolipidemic therapy with statin.