239+240Pu and137Cs concentrations in salmon (Oncorhynchus keta) collected on the Pacific coast of Japan

Salmon (Oncorhynchus keta) samples were collected on the Pacific coast of Japan and analyzed for their^239+240Pu and¹³⁷Cs concentrations in six places, i.e., muscle, viscera, gill, gonad, skin and spine. The^239+240Pu concentrations in muscle ranged from 0.07 to 0.14 mBq/kg (wet) and had the lowest value among the six regions. The mean^239+240Pu concentrations in viscera, gonad and spine were more than 1 mBq/kg (wet_ while those in muscle and skin were one order of magnitude lower. The largest amounts of^239+240Pu were accumulated in gonad. The^239+240Pu/¹³⁷Cs activity ratios in all positions were lower than that of the global fallout ratio of 0.022, suggesting that¹³⁷Cs could be accumulated with greater ease than^239+240Pu in all positions and ratios of uptake differed remarkably from position to position. The total accumulations of^239+240Pu and¹³⁷Cs in salmon were 1.32 and 328 mBq/individual, respectively.     

A gamma-spectrometric method for the determination of plutonium isotope ratios

A gamma-spectrometric method using an intrinsic high resolution germanium detector has been developed for the determination of isotope ratios of plutonium from samples in solution form. The method is based on the assay of low energy gamma-rays of²³⁸Pu,²³⁹Pu,²⁴⁰Pu and²⁴¹Pu and does not require the use of branching intensities or the knowledge of detection efficiencies for different gamma rays. Since low energy gamma-rays are used, the effect of²⁴¹Am has also been studied. It is found that results are not affected up to 0.5 wt% of²⁴¹Am in plutonium samples. An accuracy of 3% is achievable in the determination of²⁴⁰Pu/²³⁹Pu and²⁴¹Pu/²³⁹Pu atom ratios as demonstrated by carrying out measurements on isotopic standards of plutonium.     

Use of combined alpha-spectrometry and fission track analysis for the determination of240Pu/239Pu ratios in human tissue

Plutonium and other actinides were determined in human autopsy tissues of occupationally exposed workers who were registrants of the United States Transuranium and Uranium Registries (USTUR). In this study, Pu was purified and isolated from Am, U and Th, after drying and wet-ashing of the tissues, and the addition of²³⁸Pu as a radiotracer. After electrodeposition onto vanadium planchets the^239+240Pu activity was determined by alpha-spectrometry. A fission track method was developed to determine²³⁹Pu in the presence of²³⁸Pu and²⁴⁰Pu, using Lexan^TM polycarbonate detectors. Combining the two techniques allowed the determination of the²⁴⁰Pu/²³⁹Pu activity and atom ratios. Data from selected USTUR cases are presented.     

Measurement of240Pu/239Pu ratio by fission track method and inductively coupled plasma mass spectrometry

Fission track /FT/ method and inductively coupled plasma mass spectrometry /ICP-MS/, that is a new analytical technique for the analysis of trace element, were used for the measurement of²⁴⁰Pu/²³⁹Pu ratios in environmental samples. The results obtained by both methods are in agreement within the relative deviation of 9–13%. The precision in ICP-MS was found to be better than in it the FT-method. These methods are applicable to measure the Pu isotopes ratio at low concentration levels in environmental samples.     

Determination of 241Pu in marine samples using co-precipitation with rare earth fluoride and liquid scintillation spectrometry

²⁴¹Pu was measured in reference materials and marine samples using a novel method based on rare earth fluoride co-precipitation followed by liquid scintillation spectrometry (LSS). Disc sources used for -spectrometry of ²³⁸Pu and ^239+240Pu were leached with concentrated nitric acid before neodymium fluoride co-precipitation to scavenge plutonium in the lower oxidation states was carried out. After the determination of the chemical recovery by -spectrometry, the precipitate was recovered in a H₃BO₃/HNO₃ based dissolver and mixed with Packard Insta-Gel^Ò Plus cocktail before LSS. Reasonable agreement has been obtained between the results obtained using this methods and the data obtained by direct disc analysis by LSS and ICP-MS. The ²⁴¹Pu/^239+240Pu ratios were coherent with the expected origin of the Pu contaminant in the marine environment showing the validity of the method.This revised version was published online in November 2005 with corrections to the Cover Date.     

ICP-MS analysis of plutonium activities and <Superscript>240</Superscript>Pu/<Superscript>239</Superscript>Pu ratio in alpha spectrometry planchet deposits

Plutonium isotopes were measured by alpha-spectrometry and ICP-MS in sediment samples from two European lakes: Blelham Tarn in U.K. and Stechlin lake in Germany. The ICP-MS measurements were made after alpha-spectrometry counting of the planchets. The planchets were prepared by traditional electrodeposition method after radiochemical extraction, separation and purification of the Pu fraction. A short radiochemical separation using plutonium selective resin, between the two spectrometry measures, is presented. The results show that these two complementary methods are in good agreement, the plutonium activity concentrations are the same. Alpha-spectrometry allows the ²³⁸Pu determination and ICP-MS individual measurement of ²³⁹Pu and ²⁴⁰Pu. ²³⁸Pu/^239+240Pu and ²⁴⁰Pu/²³⁹Pu ratios are calculated to determine the plutonium contamination source. With the results of these two techniques, it could be demonstrate that the plutonium is of global fallout origin.     

Development of new centrifuges for fast solvent extraction of transactinide elements

Inductively coupled plasma-mass spectrometry (ICP-MS) was used to concurrently determine multiple long-lived (t_1/2>10⁴ y) actinide isotopes in soil leachates. Ultrasonic nebulization was found to maximize instrument sensitivity. Instrument detection limits for actinides in solution ranged from 50 mBq L^–1 (²³⁹Pu) to 2Bq L^–1 (²³⁵U). Hydride adducts of²³²Th and²³⁸U interfered with the determinations of²³³U and²³⁹Pu; thus, extraction chromatography was used to concentrate the analytes and separate uranium from the other actinides in advance of mass spectrometric determination. Alpha spectrometric determinations of²³⁰Th,²³⁹Pu, and the²³⁴U/²³⁸U activity ratio in soil leachates compared well with ICP-MS determinations; however, there were some small systematic differences (ca. 10%) between ICP-MS and -spectrometric determinations of²³⁴U and²³⁸U activities. These differences were attributed to the use of different isotope dilution spikes for ICP-MS and -spectrometry.     

Procedures to define Pu isotopic ratios characterizing a contaminated area in Palomares (Spain)

Plutonium isotopic ratios have been calculated in soils contaminated by the Palomares accident which occurred in 1966 (Almería, Southeastem Spain). Contrasted techniques have been used to determine the radionuclide activities:²³⁸Pu and^238+240Pu were analysed by -spectrometry prior purification on anion-exchange resins, the ratio²³⁹Pu/²⁴⁰Pu was estimated by -spectra deconvolution and²⁴¹Pu was directly measured by liquid scintillation counting and indirectly through quantification of in-grown²⁴¹Am from aged plutonium discs. The mean activity ratios²³⁸Pu/²³⁹Pu,²³⁹Pu/²⁴⁰Pu,²⁴¹Pu/²³⁹Pu, backdated to 1966, were 0.027±0.002 (1), 4.5±0.2 (1) and 8.2±0.8 (1), respectively, characterizing the accident of Palomares as the source term of the measured plutonium.     

Behavior of plutonium isotopes in the marine environment of Enewetak atoll

There continue to be reports in the literature that suggest a difference in the behavior of^239+240Pu and²³⁸Pu in some aquatic environments. Plutonium isotopes have been measured in marine samples collected over 3 decades from Enewetak atoll, one of the sites in the Marshall Islands used by the United States between 1946 and 1958 to test nuclear devices. The plutonium isotopes originated from a variety of complex sources and could possibly coexist in this environment as different physical-chemical species. However results indicate little difference in the mobility and biological availability of^239+240Pu and²³⁸Pu.     

Plutonium concentration distribution in bed load sediment samples along the Romanian sector of the Danube river and the Black Sea coast

The concentrations of²³⁸Pu and^{239, 240}Pu were determined in 12 sediment samples collected from the bed of the Romanian Danube river and Black Sea coast during June–September 1994. After the sample material has been properly prepared and²⁴²Pu tracer added, plutonium was separated from americium and curium by anion exchange. After electrodeposition on stainless steel discs the elements were counted with an -spectrometry system with silicon surface-barrier detectors. The^{239, 240}Pu concentrations range between 150 and 800 mBq kg^–1 dry, while the²³⁸Pu concentrations rise up to max 150 mBq kg^–1 dry. Although the chemical yields are rather low (51%) we appreciate the results as valuable since they report for the first time the distribution of the plutonium contamination along the Danube river and the Black Sea coast-Romanian sector.     

Simultaneous determination of238Pu,239+240Pu,241Pu,241Am,242Cm,244Cm,89Sr,and90Sr in vegetation samples,and application to Chernobyl-fallout contaminated grass

A radiochemical procedure is described for the simultaneous determination of²³⁸Pu,^239+240Pu,²⁴¹Pu,²⁴¹Am,²⁴²Cm,²⁴⁴Cm,⁸⁹Sr, and⁹⁰Sr in vegetation samples. The method was applied for the determination of these, radionuclides in grass, collected near Munich after the fallout from the reactor accident at Chernobyl, USSR. The specific activities observed were (in Bq kg^–1 dry weight):²³⁸Pu, 0.077;^239+240Pu, 0.15;²⁴¹Pu, 3.9;²⁴¹Am, 0.031;²⁴²Cm, 3.0;²⁴⁴Cm, 0.008;⁸⁹Sr, 2000;⁹⁰Sr, 99.     

Alpha-emitting radionuclide contents in food samples as related to the Chernobyl accident

As a preliminary survey to establish intake of -emitting nuclides, in particular^239,240Pu, from a daily diet for inhabitants living near the Chernobyl reactor site, some kinds of food samples including total diet samples were collected in the Chernobyl (Ukraine) area and in the Ibaraki prefecture (Japan). Plutonium-239 and 240 were determined together with naturally occurring -emitters²²⁶Ra and U isotopes (²³⁴U,²³⁵U and²³⁸U) by -spectrometry after chemical separation. In most of the samples studied,^239,240Pu was less than the detectable amount, but in some mushrooms from the Ukraine it was found to be 41.6 mBq kg^–1 (wet mass) with a high activity ratio(0.58±0.08) of²³⁸Pu/^239,240Pu, indicating that nearly 100% of the^239,240Pu was attributable to the accident. Concentrations of²²⁶Ra and²³⁸U varied largely, depending on the samples. The measured activity ratios of²³⁵U/²³⁸U for some samples showed the isotopic composition of natural uranium.     

Plutonium characteristics in sediments of Hiroshima Bay in the Seto Inland Sea in Japan

Sediment core samples were collected from Hiroshima Bay in the Seto Inland Sea, western Northwest Pacific Ocean, and their ^239+240Pu activities and ²⁴⁰Pu/²³⁹Pu atom ratios were determined by sector field ICP-MS. The activities of ^239+240Pu ranged from 0.556 ± 0.025 to 0.745 ± 0.023 mBq/g. The atom ratios of ²⁴⁰Pu/²³⁹Pu were almost constant within the whole depth; the average value was 0.227 ± 0.014. This atom ratio was significantly higher than the mean global fallout ratio of 0.18, proving the presence of close-in fallout Pu that originated from the Pacific Proving Ground (PPG). The water masses exchanges between the Kuroshio Current and the Seto Inland Sea brought the PPG source Pu to this area, then Pu was extensively scavenged into sediment particles supplied by the rivers around the bay. The relative contributions of the global fallout Pu and the PPG close-in fallout Pu were evaluated by the two end-member mixing model. The contribution of the PPG close-in fallout was 38?C41% of the total Pu in sediment. The remaining 59?C62% was attributed to direct global fallout and the land-origin Pu transported by the rivers around the Hiroshima Bay.     

Development of a bipolar electrolysis system for tritium accumulation in HTO

Due to the different ²⁴⁰Pu/²³⁹Pu atom ratios from different sources of Pu in the environment, Pu isotopes have been widely used for source identification of radionuclides in sediments. In this work, using sector-field ICP-MS, we investigated Pu inventory and its isotopic composition in a lacustrine sediment core collected in Chenghai Lake, SW China. The ²⁴⁰Pu/²³⁹Pu atom ratios in this sediment core ranged from 0.166 to 0.271 with a mean of 0.195±0.021, which was slightly higher than that of global fallout. The ^239+240Pu/¹³⁷Cs activity ratios ranged from 0.0155 to 0.0411, with a mean of 0.0215, and the ^239+240Pu inventory was 35.4 MBq/km²; both ^239+240Pu/¹³⁷Cs activity ratio and Pu inventory were close to those values of global fallout at 20–30 °N. Three peaks were observed for both ¹³⁷Cs and ^239+240Pu activities in the examined sediment core; they most probably indicated the maximum deposition of global fallout between 1963 and 1964, the fallout from a series of Chinese nuclear tests during the 1970s, and the deposition of resuspended Pu-bearing particles from the Chernobyl accident. Therefore, the vertical profile of Pu isotopes should provide useful time markers for rapid dating of recent sediments. These authors contributed equally to this work.     

The measurement of the isotopic composition of plutonium in an Irish Sea sediment by mass spectrometry

Samples from sediment cores, collected from a site close to the Sellafield outfall and dated using conventional - and -spectrometry, have been analysed using Inductively Coupled Plasma Mass Spectrometry (ICP-MS) and Thermal Ionisation Mass Spectrometry (TIMS). This has provided information on the isotopic composition of plutonium in the liquid discharges from Sellafield; such information is not available using conventional -spectrometry alone. There was very good agreement between the²⁴⁰Pu/²³⁹Pu ratios obtained by the two MS methods. More recent discharges have been characterised by a progressive decrease in the relative proportion of²³⁹Pu.     

Sequential separation and determination of plutonium, americium-241 and strontium-90 in soils and sediments

A sensitive and reliable metbod for the sequential separation and determination of plutonium,²⁴¹Am and⁹⁰Sr in soil samples was developed. Plutonium was separated by a Microthene-TNOA column. Then⁹⁰Y (for⁹⁰Sr determination) was separated from americium by a HDEHP column after elimination of large amounts of interfering stable or radioactive nuclides (iron,²¹⁰Bi and²¹⁰Po etc.) by an oxalate precipitation and a Microthene-TNOA column. Finally americium was purified by another HDEHP column and a PMBP-TOPO extraction. A special attention was paid to the decontamination of Pu and Am from²¹⁰Po and of⁹⁰Y from²¹⁰Bi; the relevant decontamination factors resulted greater than 10⁵, 10⁶ and 10⁴ respectively. The detection limits were 1.2 mBq/kg for Pu and 1.7 mBq/kg for²⁴¹Am and 0.32 Bq/kg for⁹⁰Sr. The procedure was checked by analyzing three certified samples supplied by IAEA. Some Italian soil samples were also analyzed giving average yields of 84.9±7.2% for Pu, 57.8±3.2%for Am and 96.7±1.6% for Y; the^239+240Pu,²³⁸Pu,²⁴¹Am and⁹⁰Sr contents (Bq/kg) ranged from 0.347 to 1.53, from 0.013 to 0.048, from 0.126 to 0.556 and from 2.89 to 11.6 respectively and the average ratios were 0.037±0.017 for²³⁸Pu/^239+240Pu, 0.357±0.040 for²⁴¹Am/^239+240Pu and 7.0±1.2 for⁹⁰Sr/^239+240Pu.     

Fallout of transuranium elements following the Chernobyl accident

The deposition of transuranium elements in Sweden following the Chernobyl accident was investigated through the analysis of carpets of lichen-and moss-samples and also air-filters and precipitation. The impact of transuranium elements was small compared to that of radiocesium. The deposition of^239+240Pu was, as for other actinides, inhomogeneously distributed and ranged from 0.1% to 100% of the inventory in 1986 from nuclear detonation tests. The activity ratio of^239+240Pu/¹³⁷Cs was between 10^–3 and 10^–6 in comparison to 10^–2 for nuclear test fallout. The activity ratios of²⁴¹Pu,²⁴²Cm,²³⁸Pu,^243+244Am and^239+240Pu were about 86, 14, 0.47, 0.14, and 0.13 respectively, but large variations were observed. The results from Sweden were compared with those found in South Finland, Denmark and Southern Europe. The deposition over Scandinavia originated from the initial explosion at Chernobyl, which contained relatively higher amounts of actinide elements than the second emission, which occurred a few days later and was a result of actions taken to bring the fire under control.     

Determination of the plutonium concentration by isotope dilution mass spectrometry using239Pu as a spike

A method is described for the determination of plutonium concentration in the presence of a bulk of other impurities by isotope dilution mass spectrometry /IDMS/ using²³⁹Pu as a spike. The method involves the addition of²³⁹Pu spike / 90 atom%/ to samples with²³⁹Pu / 70 atom%/ and vice versa. After ensuring chemical exchange between the sample and the spike isotopes, plutonium is purified by conventional anion exchange procedure in 7M HNO₃ medium.²³⁹Pu/²⁴⁰Pu atom ratio in the purified spiked sample is determined with high precision /better than 0.1%/ using a thermal ionization mass spectrometer. Concentration of plutonium in the sample is calculated from the changes in²³⁹Pu/²⁴⁰Pu atom ratio in the spiked mixture. Results obtained on different plutonium samples using²³⁹Pu as a spike are compared with those obtained by the use of²⁴²Pu spike. Precision and accuracy comparable to those achieved by using²⁴²Pu are demonstrated. The method provides an alternative in the event of non-availability of enriched²⁴²Pu or²⁴⁴Pu required in IDMS of plutonium and at the same time, offers certain advantages over the use of²⁴²Pu or²⁴⁴Pu spike.     

Plutonium measurements in Hanford DOE site waste samples

This paper describes development work to prepare a method to measure absolute²³⁹Pu content and Pu-isotopics by ICP-MS in acidified Hanford DOE-site samples which are very high in⁹⁰Sr,⁹⁹Tc, and¹³⁷Cs radioactivity and which are frequently high in organic carbon content. Samples with very large⁹⁰Sr and¹³⁷Cs contents have historically been difficult to analyze for Pu content by each of three alpha-counting techniques in use at SRS, and analysis by ICP-MS in these samples is complicated by the high organics content. We report an ion exchange chemical preparation to obtain fraction of Pu that does not contain any fission product contribution and no interfering organics to allow measure of absolute²³⁹Pu and of²³⁹Pu through²⁴¹Pu isotopics by ICP-MS. The method uses a²⁴²Pu spike to measure Pu recovery and is demonstrated in this paper with three distinct commercially available resins and with over 300 samples. Measured absolute²³⁹Pu contents in sixty-three spiked/unspiked duplicates have agreed within 15% precision. Overall²⁴²Pu recoveries were near 90% with 25% precision. Comparisons of absolute²³⁹Pu contents measured directly on three samples agreed within the quoted 25% uncertainty.