Formation of [FeW12O40]5− under hydrothermal conditions: syntheses,crystal structures,and characterization of [Fe(2,2′-bipy)3]2[HFeW12O40] · 5H2O and (4,4′-H2bipy)6(Hpy)2(H3O)[FeW12O40]3 · 11H2O

Two supramolecular compounds based on tungstoferrate [FeW₁₂O₄₀]^5?, [Fe^II(2,2′-bipy)₃]₂[HFeW₁₂O₄₀] · 5H₂O (1), and [Hpy]₂[4,4′-H₂bipy]₆(H₃O)[FeW₁₂O₄₀]₃ · 11H₂O (2) (py = pyridine, bipy = bipyridine) were synthesized hydrothermally and characterized structurally. The hydrogen bonds between polyoxoanions and water and the edge-to-face π–π interaction between [Fe^II(2,2′-bipy)₃]²⁺ with a shortest C–C distance of 3.513 Å are the main forces to construct the 3-D architecture of 1. In 2, a 3-D supramolecular architecture is assembled by the tungstoferrate anions, protonated 4,4′-bipy cations, and water through hydrogen bonding. The variable-temperature magnetic susceptibilities indicate that 1 is paramagnetic with μ _eff corresponding to one Fe(III) with spin-only contribution, showing that Fe in the coordination cations has a +II oxidation number and low spin state.     

Electrochemical, spectroelectrochemical and theoretical studies on the reduction and deprotonation of the photovoltaic sensitizer [(H3-tctpy)Ru(NCS)3] (H3-tctpy=2,2′:6′,2′′-terpyridine-4,4′,4′′-tricarboxylic acid)

The electrochemical reduction of the black dye photosensitizer [(H₃-tctpy)Ru^II(NCS)₃]⁻ (H₃-tctpy=2,2′:6′,2′′-terpyridine-4,4′,4′′-tricarboxylic acid) used in photovoltaic cells has been found to be a complex process when studied in dimethylformamide. At low temperatures, fast scan rates and at a glassy carbon electrode, the chemically reversible ligand based one-electron reduction process [(H₃-tctpy)Ru(NCS)₃]⁻+e⁻[(H₃-tctpy√⁻)Ru(NCS)₃]²⁻ is detected. This process has a reversible half-wave potential (E^r_1/2) of −1585±20 mV versus Fc/Fc⁺ at 25°C. Under other conditions, a deprotonation reaction occurs upon reduction, which produces [(H_3−x-tctpy^x−)Ru(NCS)₃]^(1+x)− and hydrogen gas. Mechanistic pathways giving rise to the final products are discussed. The E^r_1/2-value for the ligand based reductions of the deprotonated complex is 0.70 V more negative than for [(H₃-tctpy)Ru(NCS)₃]⁻. Consequently, data obtained from molecular orbital calculations are consistent with the reaction [(H₃-tctpy)Ru(NCS)₃]⁻+e⁻→[(H₂-tctpy⁻)Ru(NCS)₃]²⁻+1/2H₂ yielding the monodeprotonated complex as the major product obtained after electrochemical reduction of [(H₃-tctpy)Ru(NCS)₃]⁻. The E^r_1/2-values for the metal based Ru^II/III process differ by 0.30 V when data obtained for the protonated and deprotonated forms of the black dye are compared. Electronic spectra obtained during the course of experiments in an optically transparent thin layer electrolysis configuration are consistent with the overall reaction scheme proposed on the basis of voltammetric measurements and molecular orbital calculations. Reduction studies on the free ligand, H₃-tcpy, are consistent with results obtained with [(H₃-tctpy)Ru(NCS)₃]⁻.     

球磨改性对(Ti Cr)_(0.497)V_(0.42)Fe_(0.083)/30%(w)(LaRMg)(NiCoAl)_(3.5)合金复合电极材料储氢和电化学性能的影响

以钒基合金(Ti Cr)0.497V0.42Fe0.083为基体,添加30%(w)稀土系A2B7型合金(LaRMg)(NiCoAl)3.5为电催化活性材料,采用机械球磨改性制备了储氢合金复合电极材料,研究其储氢特性和电化学性能.X射线衍射(XRD)、扫描电镜(SEM)和透射电子显微镜(TEM)分析结果表明,随球磨时间增加(t=0,0.5,1,3,5,10h),复合材料颗粒逐渐细化,A2B7型合金颗粒分散并包覆在钒基合金表面上;当球磨时间t≥5h时,复合材料形成明显的复合纳米晶组织并伴有部分非晶化倾向,同时钒基合金BCC相结构的晶胞参数a和晶胞体积V均明显减小.合金储氢特性及电化学性能分析测试结果表明,铸态纯钒基合金的吸氢量为3.11%(w),而球磨复合材料的储氢量随球磨时间增加呈减小的规律,其最大储氢量为2.47%(w);球磨改性后,复合材料电极的电催化性能得到明显改善,当球磨时间t≥3h时最大放电容量达到425.8mAh·g-1,经100次充放电循环后该电极的容量保持率(C100/Cmax)为97%,表现出良好的电极循环稳定性.     

Hollow Nanotube Ru/Cu2+1O Supported on Copper Foam as a Bifunctional Catalyst for Overall Water Splitting

Hydrogen energy is considered as one of the ideal clean energies for solving the energy shortage and environmental issues, and developing highly efficient electrocatalysts for overall water splitting to produce hydrogen is still a huge challenge. Herein, for the first time, Ru-doped Cu₂₊₁O vertically arranged nanotube arrays in situ grown on Cu foam (Ru/Cu₂₊₁O NT/CuF) are reported and further investigated for their catalytic properties for overall water splitting. The Ru/Cu₂₊₁O NT/CuF presents ultrahigh catalytic activities for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline conditions, and it exhibits a small overpotential of 32 mV at 10 mA cm⁻² in the HER, and only needs 210 mV overpotential to achieve a current density of 10 mA cm⁻² in the OER. Importantly, the alkaline electrolyzer using Ru/Cu₂₊₁O NT/CuF as a bifunctional electrocatalyst only needs 1.53 V voltage to deliver a current density of 10 mA cm⁻², which is much lower than the benchmark of IrO₂(+)/Pt(−) counterpart (1.64 V at 10 mA cm⁻²). The excellent performance of the Ru/Cu₂₊₁O NT/CuF catalyst is attributed to its high conductive substrate and special Ru-doped nanotube structure, which provides a high electrochemical active surface area and 3D gas diffusion channel.     

Bis­[tris(2,2′‐bi­pyridine‐κ2N,N′)­ruthenium(II)] hexa­cyano­ferrate(III) chloride octahydrate

In the title compound, [Ru^II(C₁₀H₈N₂)₃]₂[Fe^III(CN)₆]Cl·8H₂O, the [Ru(bpy)₃]²⁺ (bpy is 2,2′‐bi­pyridine) cations and water mol­ecules afford intriguing microporous honeycomb layers, while the [Fe(CN)₆]³⁻ anions and the remainder of the water mol­ecules form anionic sheets based on extensive hydrogen‐bonding networks. The cationic and anionic layers alternate along the c axis. The Fe atom in [Fe(CN)₆]³⁻ lies on an inversion centre and the axial cyano ligands are hydrogen bonded to the water mol­ecules encapsulated within the micropores [N⋯O = 2.788 (5) Å], giving an unusual interpenetration between the cationic and anionic layers. On the other hand, the in‐plane cyano ligands are relatively weakly hydrogen bonded to the water mol­ecules [N⋯O = 2.855 (7) and 2.881 (8) Å] within the anionic sheets.     

Synthesis,characterization and magnetic properties of mixed-valence iron complexes with 2-pyridyl oximes

Abstract

Two new mixed-valence iron complexes with 2-pyridyl oximes, [Fe(mpko)₃Fe(H₂O)₂(NO₃)](NO₃)·2H₂O (1) (mpko^? = methyl(2-pyridyl)ketone oximate) and [{Fe(dpko)₃}₂Fe](ClO₄)·4H₂O (2) (dpko^? = bis(2-pyridyl)ketone oximate), have been prepared by reaction of Fe^III with mpkoH in methanol (1) and Fe^II with dpkoH in methanol/water (2). Dinuclear Fe^II(low-spin)Fe^III(high-spin) and trinuclear Fe^II(low-spin)Fe^III(high-spin)Fe^II(low-spin) cations are present in the crystal structure of 1 and 2, respectively. Intermolecular hydrogen bonds in 1 lead to weak antiferromagnetic interactions between pairs of neighboring Fe^III centers, which allows observation of single-ion zero-field splitting effects.     

Redox Equilibria in the System Fe(OH)3(H2SO4)-Na2SO3-H2O Involving Precipitation of Iron(II) Sulfite as a Fe2O3 Precursor

Experimental data on the equilibria Fe²⁺/Fe³⁺ and SO₃ ²⁻/SO₄ ²⁻ in the system Fe(OH)₃(H₂SO₄)-Na₂SO₃-H₂O are presented. The quantitative relations between the reduction of Fe(III) and the precipitation of FeSO₃·2.5H₂O as a Fe₂O₃ precursor have considered graphically.__________Translated from Zhurnal Prikladnoi Khimii, Vol. 78, No. 1, 2005, pp. 41–44.Original Russian Text Copyright © 2005 by Vasekha, Motov.     

On The Nature of FeIV=Oaq in Aqueous Media: A DFT analysis

Fe^IV=O_aq is a key intermediate in many advanced oxidation processes and probably in biological systems. It is usually referred to as Fe^IV=O²⁺. The pKa's of Fe^IV=O_aq as derived by DFT are: pKa1=2.37 M06 L/6-311++G(d,p) (SDD for Fe) and pKa2=7.79 M06 L/6-311++G(d,p) (SDD for Fe). This means that in neutral solutions, Fe^IV=O_aq is a mixture of (H₂O)₄(OH)Fe^IV=O⁺ and (H₂O)₂(OH)₂Fe^IV=O. The oxidation potential of Fe^IV=O_aq in an acidic solution, E⁰{(H₂O)₅Fe^IV=O²⁺/Fe^III(H₂O)₆³⁺, pH 0.0} is calculated with and without a second solvation sphere and the recommended value is between 2.86 V (B3LYP/Def2-TZVP, with a second solvation sphere) and 2.23 V (M06 L/Def2-TZVP without a second solvation sphere). This means that Fe^IV=O_aq is the strongest oxidizing agent formed in systems involving Fe^VIO₄²⁻ even in neutral media.     

The role of intermolecular interactions in the assemblies of Fe and Co tetrakis-isothiocyanatometalates with tris(1,10-phenanthroline)-Ru: Crystal structures of two dual-metal assemblies featuring octahedral cationic and tetrahedral anionic modules

Two new dual-metal assemblies: 2[Ru(phen)₃]²⁺·[Fe(SCN)₄]²⁻·2SCN⁻·4H₂O 1 and [Ru(phen)₃]²⁺·[Co(SCN)₄]²⁻2, (phen:1,10-phenanthroline), have been prepared and their structures were characterized by X-ray diffraction. In 1, the cationic octahedral enantiomers are arranged with a ΛΔΛΔΛ sequence supported by π-π stacking and the anionic inorganic tetrahedral units are oriented between these stacks by interacting with the nearby water molecules through strong O-H?O and O-H?S hydrogen bonds. In 2, homochiral double helices in the b-direction are revealed, with tetrakis-isothiocyanate Co^II anions arranged in the crystal to furnish one-dimensional (1D)-helical chains with S?S intermolecular interactions at 3.512(2) and 3.966(2) Å supporting [Ru(phen)₃]²⁺Λ- and Δ-helices with Ru?Ru shortest distance of 8.676(7) Å. In both 1 and 2, the supramolecular assembly is maintained by C-H?S hydrogen bonds extending between the phenanthroline aromatic carbons in the cationic nodes and the sulphur atoms of the isothiocyanates anions. Analysis of S?S interactions in isothiocyanate containing compounds using Cambridge structural database (CSD) showed an angle dependence categorizing these interactions into “type-I” and “type-II”.     

Direct electrochemistry and electrocatalysis of hemoglobin immobilized in a magnetic nanoparticles-chitosan film

Magnetic nanoparticles (Fe₃O₄) were synthesized by a chemical coprecipitation method. X-ray diffraction (XRD) and transmission electron microscope (TEM) were used to confirm the crystallite structure and the particle's radius. The Fe₃O₄ nanoparticles and chitosan (CS) were mixed to form a matrix in which haemoglobin (Hb) can be immobilized for the fabrication of H₂O₂ biosensor. The Fe₃O₄-CS-Hb film exhibited a pair of well-defined and quasi-reversible cyclic voltammetric peaks due to the redox of Hb-heme Fe (III)/Fe (II) in a pH 7.0 phosphate buffer. The formal potential of Hb-heme Fe(III)/Fe(II) couple varied linearly with the increase of pH in the range of 4.0-10.0 with a slope of 46.5 mV pH⁻¹, indicating that electron transfer was accompanied with single proton transportation in the electrochemical reaction. The surface coverage of Hb immobilized on Fe₃O₄-CS film glassy carbon electrode was about 1.13 × 10⁻¹⁰ mol cm⁻². The heterogeneous electron transfer rate constant (k_s) was 1.04 s⁻¹, indicating great facilitation of the electron transfer between Hb and magnetic nanoparticles-chitosan modified electrode. The modified electrode showed excellent electrocatalytic activity toward oxygen and hydrogen peroxide reduction. The apparent Michaelis-Menten constant for H₂O₂ was estimated to be 38.1 μmol L⁻¹.     

二氧化钛和三氧化二铁复合纳米晶电极的光电化学性质

研究了以不同方式相互修饰的Fe2 O3和TiO2 纳米晶电极的光电化学行为 (包括离子的相互掺杂 ) .在不同的入射光波长下 ,瞬态光电流谱显示Ti4 掺杂的Fe2 O3电极呈现n型半导体的特性(阳极光电流 ) ;以不同方式经Fe2 O3包覆的TiO2 电极由于能级的不匹配 ,在整个的波长测量范围内没有光响应 ;而对Fe3 离子掺杂的TiO2 电极和经TiO2 修饰 (包覆或偶联 )的Fe2 O3纳米晶电极则呈现出p n共存特性 ,甚至个别的电极表现出纯粹的p型半导体的特性 .这些现象可以从p型微区的形成得到解释 .     

Mössbauer and X-ray photoelectron spectroscopic studies of prussian blue and its related compounds

The ⁵⁷Fe Mössbauer spectra of three isomorphous compounds of the type Fe₄[M^B(CN)₆]₃ · xH₂O, where M^B is Fe, Ru or Os, have been measured in the temperature range between ?178 and 25°C. The spectral pattern of the ruthenium and osmium compounds is very similar to that of selectively enriched ⁵⁷Fe₄[Fe(CN)₆]₃ · xH₂O. The temperature dependence of the isomer shift and quadrupole splitting is interpreted in terms of lattice dynamics. The X-ray photoelectron spectra also support the conclusions drawn from the Mössbauer study.     

The effect of solvents on the stability of the products of electrochemical reactions of iron, ruthenium, and osmium carbonyl cluster compounds

The electrochemical reactions of carbonyl cluster compounds M₃(CO)₁₂ (M = Fe, Ru, Os) were compared with those of [Fe₅C(CO)₁₄]^2? and [Fe₆C(CO)₁₆]^2? in different aprotic solvents. The stability of electrochemically generated products of these clusters in the studied solvents was shown to grow in the following order: tetrahydrofuran < acetone < dichloromethane < acetonitrile.     

Extreme Differences in the Interactions of `Bare' Fe+ and Fe2+ with Hydrogen Peroxide: Fenton Chemistry in the Gas Phase

The interaction of bare iron mono‐ and dications with hydrogen peroxide in the gas phase is studied by ab initio calculations employing the B3LYP/6‐311+G* level of theory. For the monocation, the quartet and sextet coordination complexes Fe(H₂O₂) are high‐energy isomers that easily interconvert to the more stable iron dihydroxide monocation Fe(OH) and hydrated iron oxide (H₂O)FeO⁺ (quartet) or dissociate into FeOH⁺+OH^. (sextet). On the dication surface, however, the order of stabilities is reversed in that Fe(H₂O₂)²⁺ (quintet) corresponds to the most stable doubly charged species, while the formal Fe^IV compounds Fe(OH) and (H₂O)FeO²⁺ are higher in energy.     

Preparation of nanocrystalline metal oxides and intermetallic phases by controlled thermolysis of organometallic coordination polymers

Organometallic coordination polymers of the super-Prussian blue type [(Me₃Sn)_nM(CN)₆] (Me=CH₃; n=3, 4; M=Fe, Co, Ru) were subjected to thermolysis in different atmospheres (air, argon, hydrogen/nitrogen). In air, oxides were found: Fe₂O₃/SnO₂ (crystalline and nanocrystalline), Co₂SnO₄ and RuO₂. In argon and in hydrogen, the intermetallic phases FeSn₂, CoSn₂, Ru₃Sn₇ and Fe₃SnC were obtained. A detailed mechanistic study was carried out using thermogravimetry (TG), X-ray diffraction (XRD), X-ray absorption spectroscopy (EXAFS) at Fe, Co, Ru and Sn K-edges, infrared spectroscopy (IR) and elemental analysis. Below 250°C, Me₃SnCN and (CN)₂ are released, whereas above 250°C oxidation or pyrolysis leads to the corresponding oxides or intermetallic phases. Polymeric cyanides containing at least two metals have turned out to be suitable precursors to prepare well-defined oxides and intermetallic phases at comparatively low temperature.     

Strategic Synthesis of Heptacoordinated FeIII Bifunctional Complexes for Efficient Water Electrolysis

In this research, highly efficient heterogeneous bifunctional (BF) electrocatalysts (ECs) have been strategically designed by Fe coordination (C_R) complexes, [Fe₂L₂(H₂O)₂Cl₂] (C1) and [Fe₂L₂(H₂O)₂(SO₄)].2(CH₄O) (C2) where the high seven C_R number synergistically modifies the electronic environment of the Fe centre for facilitation of H₂O electrolysis. The electronic status of Fe and its adjacent atomic sites have been further modified by the replacement of −Cl⁻ in C1 by −SO₄²⁻ in C2 . Interestingly, compared to C1 , the O−S−O bridged C2 reveals superior BF activity with extremely low overpotential (η) at 10 mA cm⁻² (140 mV_OER, 62 mV_HER) and small Tafel slope (120.9 mV dec⁻¹_OER, 45.8 mV dec⁻¹_HER). Additionally, C2 also facilitates a high-performance alkaline H₂O electrolyzer with cell voltage of 1.54 V at 10 mA cm⁻² and exhibits remarkable long-term stability. Thus, exploration of the intrinsic properties of metal–organic framework (MOF)-based ECs opens up a new approach to the rational design of a wide range of molecular catalysts.     

Investigation of the influence of nickel content on the correlation between the hydrogen equilibrium pressure for hydrogen absorbing alloys and the capacity of MH electrodes in open and closed cells

Two series of overstoichiometric AB_2.4 alloys [(Zr_0.35Ti_0.65)(V_1.33Cr_0.4Fe_0.27)_{2– x} Ni_{0.4+ x} and (Zr_0.5Ti_0.5)(V_0.8Mn_0.8Cr_0.4)_{2– x} Ni_{0.4+ x} ], differing in the Zr to Ti ratios in group A and the presence of Mn or Fe in group B, were examined to consider the influence of various amounts of nickel on the structural parameters following the sorption of hydrogen. To predict the electrochemical behaviour of the prepared alloys as negative electrodes for Ni-MH cells, the pressure-composition isotherms (PCT) determined for the gas/solid phase system were correlated with the electrochemical pressure-composition (EPC) isotherms estimated from the rest potential of the alloy electrode. For preliminary assessment of the practical usefulness of the prepared samples, the electrodes made of all the alloys were subjected to charge/discharge measurements in a half-cell in 6 M KOH solution and the discharge capacities were estimated. Of the alloys with Fe and Mn components, the samples (Zr_0.35Ti_0.65)(V_0.93Cr_0.28Fe_0.19Ni_1.0) and (Zr_0.5Ti_0.5)(V_0.68Mn_0.68Cr_0.34Ni_0.7) provided the highest capacities. These alloys were chosen for testing the charge/discharge cycleability in closed Ni-MH cells. The reversibility of the cell with the former sample decreased significantly around the 25th cycle, whereas the discharge capacity of the cell with the latter sample remained almost unchanged during 100 cycles of testing. Electronic Publication     

A linear Fe–O–Fe unit in bis­(dibenzyl­dimethyl­ammonium) μ‐oxo‐bis­[tribromo­ferrate(III)]

The title compound, (C₁₆H₂₀N)₂[Fe₂Br₆O], crystallizes with one dibenzyl­dimethylammonium cation and one half of a μ‐oxo‐bis­[tribromo­ferrate(III)] anion in the asymmetric unit. The bridging oxo group is situated on an inversion centre, resulting in a linear conformation for the Fe—O—Fe unit. The iron(III) cations have tetra­hedral geometry, with bond angles in the range 106.8 (1)–112.2 (1)°. The ion pairs are held together by Coulombic forces and C—H⋯Br hydrogen bonds. Each Br⁻ anion forms one hydrogen bond. No C—H⋯O hydrogen bonds are found between the O atom in the Fe—O—Fe unit and surrounding counter‐cations, consistent with the linear configuration of the Fe—O—Fe unit.     

Modeling Heme Peroxidase: Heme Saddling Facilitates Reactions with Hyperperoxides To Form High-Valent FeIV-Oxo Species

Saddle-shaped hemes have been discovered in the structures of most peroxidases. How such a macrocycle deformation affects the reaction of Fe^III hemes with hydrogen peroxide (H₂O₂) to form high-valent Fe-oxo species remains uncertain. Through examination of the ESI-MS spectra, absorption changes and ¹H NMR chemical shifts, we investigated the reactions of two Fe^III porphyrins with different degrees of saddling deformation, namely Fe^III(OETPP)ClO₄ ( 1^OE ) and Fe^III(OMTPP)ClO₄ ( 1^OM ), with tert-butyl hydroperoxide (tBuOOH) in CH₂Cl₂ at −40 °C, which quickly resulted in O−O bond homolysis from a highly unstable Fe^III-alkylperoxo intermediate, Fe^III-O(H)OR ( 2 ) into Fe^IV-oxo porphyrins ( 3 ). Insight into the reaction mechanism was obtained from [tBuOOH]-dependent kinetics. At −40 °C, the reaction of 1^OE with tBuOOH exhibited an equilibrium constant (K_a=362.3 M⁻¹) and rate constant (k=1.87×10⁻² s^M−>1) for the homolytic cleavage of the 2 O−O bond that were 2.1 and 1.4 times higher, respectively, than those exhibited by 1^OM (K_a=171.8 M⁻¹ and k=1.36×10⁻² s⁻¹). DFT calculations indicated that an Fe^III porphyrin with greater saddling deformation can achieve a higher HOMO ([Fe(d ,d )-porphyrin(a_2u)]) to strengthen the orbital interaction with the LUMO (O−O bond σ*) to facilitate O−O cleavage.