Simultaneous analysis of polyhydroxylated alkaloids by capillary electrophoresis using borate complexation and evaluation of sweeping technique for sensitivity improvement

Summary Capillary zone electrophoresis coupled to UV detection was used for the simultaneous analysis of naturally occurring polyhydroxylated alkaloids. This separation was based on anin-situ complexation with borate ions. The effect of parameters such as borate concentration, capillary temperature and analyte molecular structure on migration times and selectivity were discussed. The best separation was obtained with a fused silica capillary (48.5 cm total length ×50 μm I.D., with a bubble factor of 3), 80 mM sodium tetraborate aqueous solution at pH 9.2 and temperature of 20°C. The method was validated and showed good data in terms of migration time and peak area reproducibility, selectivity, linearity and accuracy. The validated method was applied to determine miglitol in commercially available pharmaceutical tablets. To further improve method sensitivity, a sweeping technique involving borate ions was evaluated. This technique was found very sensitive to the analyte complexation with borate, borate concentration, and temperature as well as sample matrix. In the case of miglitol, a 35-fold improvement in peak height was achieved.     

Separation of nucleoside mono-, di- and triphosphates by capillary electrophoresis via cadmium complexation

Summary The CE separation of twelve nucleotides (5′-mono-, di-, triphosphates of adenosine, guanosine, cytidine and uridine) was improved by adding cadmium ion to the ammonium citrate/citric acid buffer (pH 5, ionic strength 100 mM). Cadmium ion acts as a complexing agent for some nucleotides (ATP, CTP, GTP, UTP, GDP). In order to accelerate the separation, the electroosmotic flow was reversed by flushing the fused-silica capillary with 0.2 % aqueous solution of the polycationic surfactant hexadimethrine bromide. A good separation of the twelve nucleotides studied was then achieved on a dynamically coated capillary in less than 5 min by using an ammonium citrate/citric acid buffer (pH 5, ionic strength 100 mM) to which 2 mM cadmium ion has been added. High peak efficiencies were obtained (210 000 theoretical plates) and the resolution between two adjacent peaks was always greater than 1.5.     

Chiral separations by host-guest complexation with cyclodextrin and crown ether in capillary zone electrophoresis

Summary Capillary zone electrophoresis using cyclodextrins and a chiral crown ether as buffer constituents was studied for the enantiomeric separation of drugs and amino acids. Based on results obtained from separation of racemic -amino acids both chiral selectors are compared with respect to resolution, efficiency and retention time. For (±)-Quinagolide effects of buffer composition and temperature are examined using -cyclodextrin as chiral agent. Optimum conditions were pH 2.5 at 30 mmol L^–1 -cyclodextrin. A linear dependence of retention on -cyclodextrin concentration allowed calculation of formation constants of the host-guest complexes. Buffer concentration and temperature also influence resolution. The application of a chiral crown ether to the separation of optical isomers in capillary zone electrophoresis is described for the first time. Chiral recognition of solutes depends on the formation of protonated alkyl amines and separation is attributed to the formation of diastereomeric host-guest complexes with different interactions for each enantiomer. The effects of crown ether concentration on resolution are presented.     

毛细管区带电泳用于酶微反应器酶解条件的研究

将氨基酰化酶通过戊二醛固定在毛细管内壁,制备毛细管酶微反应器,用毛细管区带电泳对毛细管酶微反应器的酶解产物进行分离,以生成物的峰面积优化底物N-乙酰-DL-蛋氨酸的酶解条件。实验结果表明,在温度37℃的条件下,10μg/mL N-乙酰-DL-蛋氨酸磷酸盐缓冲溶液(pH7.5)以4μL/min的速度通过15 cm长的毛细管酶微反应器,具有良好的酶解效果。利用毛细管酶微反应器对底物N-乙酰-DL-蛋氨酸进行酶解,每天酶解5次,10天后酶活仅下降了8.66%,说明制备的毛细管酶微反应器具有良好的稳定性。     

毛细管区带电泳法测定粉针剂中头孢拉定的含量

用毛细管区带电泳法测定头孢拉定的含量 ,未涂层毛细管柱 (75 μm×48.5cm ,有效长度 40cm) ,电压 2 8kV ,检测波长 2 3 0nm ,温度 2 0℃ ,进样 5×1 0 3Pa× 3s。运行缓冲液为 2 5mmol/L硼砂缓冲液。方法的线性范围 3 1 .2 2μg/mL～ 749.2 8μg/mL ,检测限为 1 .1 7μg/mL。     

A quantitative structure property relationship study of electrophoretic mobility of analytes in capillary zone electrophoresis

A quantitative structure property relationship (QSPR) is proposed to calculate the electrophoretic mobility of analytes in capillary zone electrophoresis. The proposed model employs logarithm of the electrophoretic mobility (ln micro) as dependent variable and partial charge (PQ), surface area (V(2/3)), total energy (TE), heat of formation (DeltaH(f)) and molecular refractivity (MR) as independent variables whose calculated using AM1 (Austin model 1) semi-empirical quantum mechanics method by HyperChem 7.0 software. The general form of the model is: ln micro =K(0)+K(1)PQ+K(2)V(2/3)+K(3)TE+K(4)DeltaH(f)+K(5)MR, where K(0)-K(5) are the model constants computed using a least-square method. The applicability of the model on real mobility data has been studied employing five experimental data sets of beta-blockers, benzoate derivatives, non-steroidal anti-inflammatory drugs, sulfonamides and amines in different buffers. The accuracy of the model is assessed using absolute average relative deviation (AARD) and the overall AARD value. The obtained AARD for the sets studied are 1.0 (N=10), 2.1 (N=26), 0.8 (N=11), 0.6 (N=13) and 2.7% (N=18), respectively, and the overall AARD is 1.4%. The model is cross-validated using one leave out technique and the obtained overall AARD is 1.8%. To further investigate on the applicability of the proposed model, the prediction capability of the model is evaluated by employing a minimum number of six experimental data points as training set, and predicting the mobility of other data points using trained models. The obtained overall AARD (for 48 predicted data points) is 5.6%.     

Separation of the enantiomers of four chiral drugs by neutral cyclodextrin-mediated capillary zone electrophoresis

Summary Neutral cyclodextrin (CD)-modified capillary zone electrophoresis (CZE) has been applied to the chiral separation of four basic drugs— clorprenaline, benzhexol, esmolol and terazosin. Selector screening and concentration optimization experiments were performed. The resolution was 3.9 for clorprenaline, 2.3 for benzhexol, 3.1 for esmolol and 1.2 for terazosin when the running electrolyte was 60 mM hydroxypropyl-β-CD, 15 mM heptakis (2,3,6-Tri-O-methyl)-β-CD, 60 mM γ-CD and 60 mM heptakis (2,6-di-O-methyl)-β-CD, respectively, in 50 mM, pH 2.5 sodium phosphate buffer.     

Analytical potential of enzyme-coated capillary reactors in capillary zone electrophoresis

Enzymes immobilized on the inner surface of an electrophoretic capillary were used to increase sensitivity and resolution in capillary zone electrophoresis (CZE). Sensitivity is enhanced by inserting a piece of capillary containing the immobilized enzyme into the main capillary, located before the detector, in order to transform the analyte into a product with a higher absorptivity. This approach was used to determine ethanol. In order to improve resolution, capillary pieces containing immobilized enzymes were inserted at various strategic positions along the electrophoretic capillary. On reaching the enzyme, the analyte was converted into a product with a high electrophoretic mobility, the migration time for which was a function of the position of the enzyme reactor. This approach was applied to the separation and determination of acetaldehyde and pyruvate. Finally, the proposed method was validated with the determination of ethanol, acetaldehyde, and pyruvate in beer and wine samples.     

Mobilization of electroosmotic flow markers in capillary zone electrophoresis

UV-absorbing neutral substances are commonly used as markers of mean electroosmotic flow in capillary electrophoresis for their zero electrophoretic mobility in an electric field. However, some of these markers can interact with background electrolyte components and migrate at a different velocity than the electroosmotic flow. Thus, we tested 11 markers primarily varying in their degree of methylation and type of central atom in combination with five background electrolyte cations differing in their ionic radii and surface charge density, measuring the relative electrophoretic mobility using thiourea as a reference marker. Our results from this set of experiments showed some general trends in the mobilization of the markers based on the effects of marker structure and type of background electrolyte cation on the relative electrophoretic mobility. As an example, the effects of an inadequate choice of marker on analyte identification were illustrated in the electrophoretic separation of glucosinolates. Therefore, our findings may help electrophoretists appropriately select electroosmotic flow markers for various electrophoretic systems.     

Determination of egg white lysozyme by on-line coupled capillary isotachophoresis with capillary zone electrophoresis

An on-line coupled capillary isotachophoresis - capillary zone electrophoresis method for the determination of lysozyme in selected food products is described. The optimized electrolyte system consisted of 10 mM NH(4)OH + 20 mM acetic acid (leading electrolyte), 5 mM epsilon -aminocaproic acid +5 mM acetic acid (terminating electrolyte), and 20 mM epsilon -aminocaproic acid +5 mM acetic acid +0.1% m/v hydroxypropylmethylcellulose (background electrolyte). A clear separation of lysozyme from other components of acidic sample extract was achieved within 15 min. Method characteristics, i.e., linearity (0-50 micrograms/mL), accuracy (recovery 96+/-5%), intra-assay (3.8%), quantification limit (1 microgram/ml), and detection limit (0.25 microgram/mL) were determined. Low laboriousness, sufficient sensitivity and low running costs are important attributes of this method. The developed method is suitable for the quantification of the egg content in egg pasta.     

Separation of fluorescein dyes by capillary electrophoresis using β-cyclodextrin

Summary A capillary electrophoresis method for the separation and determination of five synthetic dyes used in pharmaceutical preparations, cosmetics and as food additives is described. The dyes, fluorescein, dichlorofluorescein, Rose Bengal erythrosine and eosine are well separated in less than 12 min using an electrolyte of 50 mM phosphate buffer (pH 7.5), 10 mM β-cyclodextrin and 5% (v/v) methanol. A linear relationship between concentration and peak area for each dye was obtained in the concentration range 0.3–500 μg mL⁻¹, with a correlation coefficient greater than 0.999. Intra- and inter-day precision of about 0.2–2.6% RSD (n=11) and 4.9–9.7% RSD (n=30), respectively, were obtained. The method has been used for determining the purity of fluorescein and erythrosine in practical samples.     

An automatic sampling device for capillary zone electrophoresis

An automatic sampling device has been developed for capillary zone electrophoresis. The sample is introduced to the column electrokinetically by rapidly exchanging buffer for sample in a narrow channel drilled in a plexiglass block. The autosampler is capable, under computer control, of performing multiple sample injections from a large volume sample source (such as a reaction vessel) as the sample concentration changes, and thus presents the possibility of analyzing time-varying processes by CZE. Peak area reproducibility in electropherograms obtained after use of the sampler is less than 1% and efficiency is more than 2.2 × 10⁵ theoretical plates.     

Separation of organic and inorganic arsenic species by capillary zone electrophoresis

Summary Capillary zone electrophoresis has been used to separate arsenite, arsenate, dimethylarsinic acid, and phenyl-,p-aminophenyl-, ando-aminophenylarsinic acids. Identification and quantification of the arsenic species at mg L⁻¹ levels was possible by use of direct UV detection at 200 nm. The relative standard deviation (n=7) ranged from 0.97 to 1.52% for migration times and from 2.08 to 4.31% for peak areas. A method for rapid separation of inorganic arsenic species was also developed; by use of this method arsenite and arsenate could be separated within 2 min. Presented at Balaton Symposium on High-Performance Separation Methods, Siófok, Hungary, September 1–3, 1999     

Mechanism of sequence-based separation of single-stranded DNA in capillary zone electrophoresis

Separation of DNA by length using CGE is a mature field. Separation of DNA by sequence, in contrast, is a more difficult problem. Existing techniques generally rely upon changes in intrinsic or induced differences in conformation. Previous work in our group showed that sets of ssDNA of the same length differing in sequence by as little as a single base could be separated by CZE using simple buffers at high ionic strength. Here, we explore the basis of the separation using circular dichroism spectroscopy, fluorescence anisotropy, and small angle X-ray scattering. The results reveal sequence-dependent differences among the same length strands, but the trends in the differences are not correlated to the migration order of the strands in the CZE separation. They also indicate that the separation is based on intrinsic differences among the strands that do not change with increasing ionic strength; rather, increasing ionic strength has a greater effect on electroosmotic mobility in the normal direction than on electrophoretic mobility of the strands in the reverse direction. This increases the migration time of the strands in the normal direction, allowing more time for the same-length strands to be teased apart based on very small differences in the intrinsic properties of the strands of different sequence. Regression analysis was used to model the intrinsic differences among DNA strands in order to gain insight into the relationship between mobility and sequence that underlies the separation.     

Preparation of a neutral porous monolith and its evaluation in pressurized capillary electrochromatography with neutral and charged solutes

A neutral, nonpolar monolithic capillary column was evaluated as a hydrophobic stationary phase in pressurized CEC system for neutral, acidic and basic solutes. The monolith was prepared by in situ copolymerization of octadecyl methacrylate and ethylene dimethacrylate in a binary porogenic solvent consisting of cyclohexanol/1,4‐butanediol. EOF in this hydrophobic monolithic column was poor; even the pH value of the mobile phase was high. Because of the absence of fixed charges, the monolithic capillary column was free of electrostatic interactions with charged solutes. Separations of neutral solutes were based on the hydrophobic mechanism with the pressure as the driving force. The acidic and basic solutes were separated under pressurized CEC mode with the pressure and electrophoretic mobility as the driving force. The separation selectivity of charged solutes were based on their differences in electrophoretic mobility and hydrophobic interaction with the stationary phase, and no obvious peak tailing for basic analytes was observed. Effects of the mobile phase compositions on the retention of acidic compounds were also investigated. Under optimized conditions, high plate counts reaching 82 000 plates/m for neutral compounds, 134 000 plates/m for acid compounds and 150 000 plates/m for basic compounds were readily obtained.     

高效毛细管区带电泳法快速测定尿液中的肌酐

建立了一种快速测定尿中肌酐浓度的高效毛细管电泳方法。利用非涂层石英毛细管(64.5 cm×50μm i.d),以pH 2.5,0.1 mmol/L H3PO4作为电泳缓冲液,检测波长191 nm,用0.05 Pa压力进样4 s,在电压16 kV快速分离尿液中的肌酐,采用外标法定量。肌酐的迁移时间约为5.5 min,肌酐浓度在34.5~8840μmol/L范围内呈良好的线性(r2=0.999)。平均日内精密度为2.5%,日间精密度为3.0%。回收率94.1%~99.0%。与全自动生化分析仪碱性苦味酸速率法相比有良好的相关性(r=0.990,n=56)。高效毛细管电泳法测定尿肌酐可应用于临床样品的检测。     

On the pH hysteresis of electroosmotic mobility with capillary zone electrophoresis in silica capillary

Summary A porous gel model of silica-solution interface was proposed to explain the pH hysteresis effect on the electroosmotic mobility with capillary zone electrophoresis in silica capillaries. It is speculated that, under acidic preconditionings of the capillaries, a porous gel layer is formed at the silica-solution interface, and the magnitudes of potential and electroosmotic mobility are then reduced due to the penetration of electrolyte counterions to the gel layer. On the other hand, under basic preconditionings, a fresh silica surfaces is created by dissolution of silica in alkaline conditions, and this would result in higher values of potential and electroosmotic mobility. The Guoy-Chapman-Stern-Grahame model was employed to simulate the pH-dependence of electroosmotic mobility for the silica capillaries with a gelling surface and with a fresh surface. The predicted data were compared with the experimental results and shown to support the explanation.