扑尔敏对映体的毛细管电泳-方波安培分离检测

报道了以未涂层融硅石英毛细管(50 cm×75 μm)为分离柱,5 mmol/L NaOH+10 mmol/L Citric acid +3 mmol/L H3BO3+10 mmol/L β-CD (pH 3.5) 为电泳介质,分离电压12 kV,检测电压0.80 V,建立了朴尔敏对映体拆分的高效毛细管电泳-方波安培检测方法.对缓冲溶液的种类、浓度、pH、分离电压对拆分效果的影响进行了讨论,并对拆分机理进行了探讨.     

带有可更换半自准工作电极的集成化毛细管电泳安培检测芯片(Ⅱ)——实验参数对多巴胺半波电位的影响

采用带有可更换半自准式集束碳纤维圆盘工作电极的集成化毛细管电泳安培检测芯片,以多巴胺为模型化合物,通过考察分离电压、通道构型及电极与通道出口的间隙等参数对待测物多巴胺半波电位的影响,提出了芯片毛细管电泳-柱端安培检测系统中减小分离电压对安培检测系统干扰的措施.     

硝基苯酚位置异构体的毛细管电泳-方波安培检测研究

在未涂层熔融石英毛细管(45 cm×50μm i.d.)中,以pH=7.9的2 mmol/L磷酸氢二钠 0.4 mmol/L磷酸二氢钠 2 mmol/Lβ-CD为电泳运行液,采用毛细管电泳-方波安培检测法,分离电压为 11 kV,可实现硝基苯酚3个位置异构体在6 min内基线分离检测。方法的检出限为0.2~0.6 mg/L。探讨了电泳运行液的组成、浓度、pH值、β-CD等因素对分离检测效果的影响。     

托吡卡胺对映体的毛细管电泳-方波安培分离检测

采用毛细管电泳-方波安培检测法,在熔融石英毛细管(75 μm i.d.×50 cm)中,以7 mmol/L 三羟甲基氨基甲烷(Tris)-10 mmol/L柠檬酸-2 mmol/L硼酸-15mmol/L β-环糊精 （β-CD） (pH 3.0)为电泳介质,采用重力进样,高度差为20 cm,进样时间为10 s,在分离电压为15 kV,方波平衡电位+0.8 V的条件下,实现了托吡卡胺对映体的分离检测。线性范围为5~750 μmol/L,检出限为2 μmol/L。对影响分离度的因素β-CD浓度、硼酸浓度及p     

联萘酚对映体的毛细管电泳/方波安培法分离检测

建立了毛细管电泳/方波安培法分离检测联萘酚对映体的新方法.对影响对映体分离度的影响因素,如手性选择剂β 环糊精浓度、氢氧化钠浓度、硼酸浓度、分离电压进行了探讨。在16mmol/L氢氧化钠+14mmol/Lβ 环糊精+4mmol/L硼酸的电泳运行液,方波平衡电位+0.90V和10kV的分离电压条件下,联萘酚对映体在10min内得到基线分离,检出限为1.0×10-6mol/L。     

手性药物异丙嗪对映体的毛细管电泳-方波安培法检测

以未涂层融硅石英毛细管 (5 0cm× 75 μm)为分离柱 ,5mmol/LNaOH +10mmol/LCitricacid +3mmol/LH3 BO3 +10mmol/L β 环糊精 (β CD) (pH =3.5 )为电泳介质 ,分离电压 12kV ,采用毛细管电泳 方波安培法对手性药物异丙嗪对映体实现了分离检测。对影响手性对映体分离检测效果的缓冲溶液的种类、浓度和 pH等诸因素进行了研究。结果表明 :硼酸与手性选择剂 β CD分子中糖羟基发生键合配位作用 ,增加了β CD 的负电性的特性 ,在对映体拆分中起到关键性的作用。     

高效毛细管电泳安培法测定肉苁蓉中松果菊苷的含量

采用毛细管电泳安培法建立了肉苁蓉中松果菊苷含量的检测方法,探讨了缓冲溶液种类、工作电位、分离电压、进样时间等对分离和检测的影响.在15 mmol/L硼砂缓冲溶液(pH 9.5),25 kV电压,0.6 V工作电位的条件下,松果菊苷的质量浓度在0.5～50.0 mg/L范围内与峰面积呈良好线性,相关系数为0.9994,检...     

毛细管电泳-方波安培法分离检测滴鼻液中的麻黄碱

在熔融石英毛细管 (75mm× 5 0cm )中 ,以 5mmol/LTris(三羟甲基氨基甲烷 ) +5mmol/LH3 BO3(pH =6 .5 )为电泳介质 ,采用毛细管电泳 方波安培检测法 ,实现了滴鼻液中盐酸麻黄碱的分离检测。探讨了缓冲溶液的种类、浓度、pH值、检测电位等因素对分离检测效果的影响。线性范围为 0 .8～ 2 0 2mg/L ,检出限为 0 .3mg/L ,回收率为 92 %～ 10 4 %。     

高效毛细管电泳的电导检测和紫外光度检测研究

本文自制商效毛细管电泳装置.研究了毛细管区带电泳电导检测和毛细管胶束电动色谱紫外光度检测。在电导检测中,制作铂丝微电导池,并由用电池隔膜制作的导电接口连接电泳毛细管和电导池,高压被有效隔离,实现柱后电导检测,用内径200μm、长70cm(到接口)石英毛细管在10kV电压下分离检测Li~-、Na~-、K~-。在电动色谱中将高效液相色谱仪与高压电源组成电泳装置,用内径100μm,长50cm(到检测器)石英毛细管和SDS胶束溶液在14kV电压下分离检测电中性化合物。     

二元手性选择体系毛细管电泳/电化学分离检测手性药物酚苄明对映体

采用羟丙基-β-环糊精(HP-β-CD)和羟丙基甲基纤维素(HPMC)组成的二元手性选择剂体系,以8mmol/L三羟甲基氨基甲烷(Tris) 10mmol/L柠檬酸(Cit) 10mg/LHPMC 25mmol/LHP-β-CD为电泳运行液,在熔融石英毛细管(50μmi.d.×45cm)中,分离电压 15kV,方波安培检测,手性药物酚苄明对映体获得良好的基线分离,线性检测范围为4～105μmol/L,检出限为1.5μmol/L。对影响灵敏度和分离度的电泳运行液组成、手性选择剂(HP-β-CD、HPMC)浓度以及进样方式和样品介质等进行了详细讨论。应用于市售盐酸酚苄明片剂中酚苄明对映体的分离检测,取得满意结果。     

Simultaneous determination of positional isomers of benzenediols by capillary zone electrophoresis with square wave amperometric detection

A capillary zone electrophoresis method coupling square wave amperometric detection (SWAD) for the simultaneous determination of positional isomers of benzendiols (i.e. o-, m-, p-benzenediols) has been developed. Effects of several factors, such as the composition of the running buffer, the pH value, separation voltage, injection time and the potential applied to the working electrode, were investigated to acquire the optimum conditions. The efficacy of the boric acid and ascorbic acid in the running buffer were discussed. o-, m-, p-Benzendiols can be well separated within 8 min in a 50 cm length of 50 microm diameter fused-silica capillary at a separation voltage of +15 kV. Operated in a wall-jet configuration, a 100 microm Pt-disk electrode used as the working electrode exhibits good response for the analytes. The relation between peak current and analyte concentration was linear over two orders of magnitude with detection limits (S/N = 3) ranging from 0.5 to 1.5 microM for all analytes. The proposed method has been successfully applied to monitor the o-, m-, p-benzendiols contents in the environmental wastewater samples with satisfactory assay results.     

毛细管电泳-安培检测法用于7-甲基鸟苷与丝裂霉素C分离检测的研究

建立了一种同时分离检测7-甲基鸟苷与丝裂霉素C的毛细管电泳-安培检测方法。在950 mV电极(工作电极:0.3 mm微型石墨圆盘电极;参比电极:Ag/AgCl;辅助电极:Pt丝)电位下,于20 mmol/L的磷酸盐缓冲体系(pH 9.4)中,采用18 kV的分离电压进行分离。在最佳条件下,7-甲基鸟苷与丝裂霉素C在10 min内实现分离,7-甲基鸟苷与丝裂霉素C的线性范围均为0.50~50 mg/L,检测限分别为0.050 mg/L与0.025 mg/L。将该方法用于模拟尿样和模拟兔血清样的检测,7-甲基鸟苷与丝裂霉素C的回收率为93.0%～97.2%,结果令人满意。     

Determination of active constituents in Lonicera confusa DC. by capillary electrophoresis with amperometric detection

A method based on capillary electrophoresis with amperometric detection has been developed for the determination of luteolin, chlorogenic acid, 3,5-dicaffeoylquinic acid and caffeic acid in the dried flower buds, leaves and stems (three medicinal parts) of Lonicera confusa DC., respectively. The effects of several important factors such as detection potential, the concentration of the running buffer, separation voltage and injection time were investigated to acquire the optimum conditions. The detection electrode was a 300 microm diameter carbon disc electrode at a working potential of + 0.90 V (vs saturated calomel electrode). The four analytes can be well separated within 10 min in a 40 cm-long fused silica capillary at a separation voltage of 12 kV in a 50 mM borate-25 mM phosphate buffer (pH 8.0). The relationship between peak current and analyte concentration was linear over about 3 orders of magnitude with detection limits (S/N = 3) ranging from 0.35 to 0.52 microM for all analytes. The proposed method has been successfully applied to the monitoring of bioactive constituents in the real plant samples with satisfactory assay results.     

A new method of quantification of pipemidic-acid by capillary zone electrophoresis with end-column amperometric detection

Capillary zone electrophoresis was employed for the determination of pipemidic acid using an end-column amperometric detection with a carbon fiber microdisk array electrode, at a constant potential of -1.10 V vs. saturated calomel electrode. The optimum conditions of separation and detection were 1.2 x 10(-4) mol/LNaOAc - 8.8 x 10(-4) mol/ LHOAc for the buffer solution, 20 kV for the separation voltage, 5 kV and 10 s for the injection voltage and the injection time. The limit of detection was 1.05 x 10(-7) mol/L or 189 amol (S/N=3). The relative standard deviation was 0.31% for the migration time and 2.0% for the electrophoretic peak current. The method was applied to determining pipemidic acid in human serum.     

Quantitative assay of metronidazole by capillary zone electrophoresis with amperometric detection at a gold microelectrode

Capillary zone electrophoresis was employed for the determination of metronidazole using end-column amperometric detection with a gold microelectrode at a constant potential of -0.52V vs. saturated calomel electrode. To overcome interference of oxygen in the solution, a deaeration injector and a deaeration protector at the detection cell were used. The optimum conditions of separation and detection are 1.0 x 10(-3) mol/L potassium dihydrogen citrate (KH2C6H5O7) for the buffer solution, 20 kV for the separation voltage, and 5 kV and 10 S for injection voltage and injection time, respectively. The limit of detection is 6.0 x 10(7) mol/L or 0.78 fmole (S/N = 3). The relative standard deviation is 3.9% for the electrophoretic peak current. The method was applied to the determination of metronidazole in human urine.     

Microchip capillary electrophoresis with electrochemical detector for fast measurements of aromatic amino acids

A method based on microchip capillary electrophoresis with amperometric detection was developed for the rapid separation and direct detection of oxidizable aromatic amino acids (without prior derivatization). The working electrode was a thick-film carbon strip electrode positioned opposite the outlet of the separation channel. Factors influencing the separation and detection processes were examined and optimized. The five aromatic amino acids, tyrosine, 5-hydroxytryptophan, tryptophan, p-aminobenzoic acid, and m-aminobenzoic acid, can be well separated within 5 min using a separation voltage of 2000 V and a 25 mM phosphate buffer (pH 7.0) run buffer containing 50 mM sodium dodecylsulfate. Most favorable amperometric detection was obtained at +0.95 V. Linear calibration plots are observed for micromolar concentrations of the oxidizable amino acids. The new protocol offers good stability and for reproducibility, with relative S.D. of less than 5% for both migration times and peak currents (n=8). It should be useful for the analysis of aromatic amino acids, as desired for life sciences.     

毛细管电泳-多壁碳纳米管/聚吡咯/磷钼酸修饰电极电化学检测饮用水中的溴酸根

用电化学聚合法制备多壁碳纳米管/聚吡咯/磷钼酸修饰电极,利用循环伏安法研究溴酸根在此修饰电极上的电化学行为.考察了实验参数对分离检测体系的影响,并在优化条件下,采用毛细管电泳-安培检测法对溴酸根进行检测.结果表明:溴酸根离子在1.0×10-6～5.0×10-3 mol/L范围内和峰面积呈良好的线性关系,检出限(S/N=...     

毛细管电泳-安培检测法测定3种拟肾上腺素药物

建立了毛细管电泳-安培检测法测定盐酸去氧肾上腺素(phenylephrine hydrochloride, PHE)、重酒石酸间羟胺(metaraminol bitartrate, MR)和盐酸异丙肾上腺素(isoprenaline hydrochloride, IP)3种拟肾上腺素药物的方法。检测电位为0.950 V(Ag/AgCl为参比电极),硼酸盐浓度为50 mmol/L(pH 10.00),分离电压为18 kV,进样时间为10 s。在最佳实验条件下,3种物质在18 min内达到基线分离,在2～100 μmol/L浓度范围内峰面积与浓度呈良好的线性关系,线性相关系数不小于0.9991。盐酸去氧肾上腺素、重酒石酸间羟胺和盐酸异丙肾上腺素的检出限分别为0.8、0.8和1.0 μmol/L。将所建立的方法应用于针剂样品的分析,结果令人满意。     

Determination of diclofenac sodium by capillary zone electrophoresis with electrochemical detection

Capillary zone electrophoresis was employed for the determination of diclofenac sodium using an end-column amperometric detection with a carbon fiber microelectrode, at a constant potential of 0.83 V vs. saturated calomel electrode. The optimum conditions of separation and detection are 4.90 x 10(-3) mol/l Na2HPO4-3.10 x 10(-3) mol/l NaH2PO4 (pH 7.0) for the buffer solution, 10 kV for the separation voltage, 5 kV and 10 s for the injection voltage and the injection time, respectively. The limit of detection is 2.5 x 10(-6) mol/l or 5.2 fmol (S/N=2). The relative standard deviation is 0.8% for the migration time and 4.7% for the electrophoretic peak current. The method was applied to the determination of diclofenac sodium in human urine.     

Monitoring human serum transferrin by capillary zone electrophoresis with end-column amperometric detection

Capillary zone electrophoresis was employed for the determination of human serum transferrin using end-column amperometric detection with a carbon fiber microelectrode at a constant potential of 1.9 V vs. saturated calomel electrode (SCE). The optimum conditions of separation and detection are 7.5 x 10(-4) mol/L Tris-3.44 x 10(-4) mol/L HCl for the buffer solution, 20 kV for the separation voltage, 5 kV and 10 s for the injection voltage and the injection time, respectively. The limit of detection is 6.7 x 10(-8) mol/L or 440 amol (S/N = 2). The relative standard deviations are 0.67% for the migration time and 1.5% for the electrophoretic peak current. The method was applied to the determination of transferrin in human serum. The recovery is between 93-104%.