An Artificial Estrogen Receptor through Combinatorial Imprinting

Polymeric sorbents targeting endocrine‐disrupting estrogen active compounds (EAC) were prepared by terpolymer imprinting using 17β‐estradiol (E2) as template. From a group of eight functional monomers representing Brønsted acids, bases, hydrogen‐bond donors and acceptors, as well as π‐interacting monomers, a terpolymer library that comprises all possible binary combinations of the functional monomers was prepared. Binding tests revealed that imprinted polymers exhibit a markedly higher affinity for E2 compared to nonimprinted polymers (NIPs) or polymers prepared by using single functional monomers. A combination of methacrylic acid (MAA) and p‐vinylbenzoic acid offered a particularly promising lead polymer, displaying an imprinting factor of 17 versus 2.4 for a benchmark polymer prepared by using only MAA as functional monomer. The saturation capacities ascribed to imprinted sites were four to five times higher for this polymer compared to previously reported imprinted polymers. NMR titrations and molecular dynamics simulations corroborated these results, indicating an orthogonal preference of the two functional monomers with respect to the E2 3‐OH and 17‐OH groups. The optimized polymer exhibited a retentivity for EACs that correlates with their inhibitory effect on the natural receptor. By using the optimized molecularly imprinted polymers (MIPs) in a model water‐purification system, they were capable of completely removing ppb levels of a small group of EACs from water. This is in contrast to the performance of nonimprinted polymers and well‐established sorbents for water purification (e.g., active carbon), which still contained detectable amounts of the compounds after treatment.     

Enantioselective synthetic thalidomide receptors based upon DNA binding motifs

A series of molecularly imprinted polymer (MIP) synthetic receptors selective for the sedative thalidomide (5) have been designed and synthesized based upon the functional monomer 9-(2'-methacryloyloxyethyl)adenine (2). (1)H-NMR studies were used to establish the existence of DNA-like binding interactions between 2 and the template (5). A series of ethylene glycol dimethacrylate cross-linked copolymers was synthesized using either 2 or methacrylic acid, or a combination of these functional monomers. Zonal HPLC studies demonstrated enantioselectivity (alpha = 2.11) and ligand selectivity which could be attributed to the interaction of 2 with the imide moiety of 5. Compound 2 provided a more significant contribution to the binding of 5 than methacrylic acid, though a combination of these two functional monomers resulted in improved enantioselectivity. Frontal chromatographic and batch binding studies confirmed the observed differences in affinity of the imprinted and reference polymers for the template.     

Design of molecular imprinted polymers compatible with aqueous environment

The main problem of poor water compatibility of molecularly imprinted polymers (MIPs) was addressed in examples describing design of synthetic receptors with high affinity for drugs of abuse. An extensive potentiometric titration of 10 popular functional monomers and corresponding imprinted and Blank polymers was conducted in order to evaluate the subtleties of functional groups ionisation under aqueous conditions. It was found that polymers prepared using 2-trifluoromethacrylic acid (TFMAA) in combination with toluene as porogen possess superior properties which make them suitable for effective template recognition in water. The potential impact of phase separation during polymerisation on formation of high quality imprints has been discussed. Three drugs of abuse such as cocaine, deoxyephedrine and methadone were used as template models in polymer preparation for the practical validation of obtained results. The polymer testing showed that synthesized molecularly imprinted polymers have high affinity and selectivity for corresponding templates in aqueous environment, with imprinting factors of 2.6 for cocaine and 1.4 for methadone and deoxyephedrine. Corresponding Blank polymers were unable to differentiate between analytes, suggesting that imprinting phenomenon was responsible for the recognition properties.     

Preparation and characterization of novel molecularly imprinted polymers based on thiourea receptors for nitrocompounds recognition

Molecularly imprinted polymers (MIPs) for the recognition of nitro derivatives are prepared from three different (thio)urea-bearing functional monomers. The binding capability of the polymers is characterized by a batch binding experiment. The imprinting factors and affinity constants (K) of the imprinted polymers exhibit the same tendency as the binding constants (K_a) of the functional monomers to the target substance in solution. Not only nitrofurantoin is efficiently bound by these MIPs but also a broad spectrum of other nitro compounds is bound with at the intermediate level, addressing that these (thio)urea-based monomers can be utilized to prepare a family of MIPs for various nitro compounds, which can be applied as recognition elements in separation and analytical application.     

Biotin-specific synthetic receptors prepared using molecular imprinting

The composition of new molecularly imprinted polymers (MIPs) specific for biotin was optimised using molecular modelling software. Three functional monomers: methacrylic acid (MAA), 2-(trifluoromethyl)acrylic acid (TFAA) and 2-acrylamido-2-methylpropanesulfonic acid (AMPSA), which demonstrated the highest binding scores with biotin, were tested on their ability to generate specific binding sites. The imprinted polymers were photografted to the surface of polystyrene microspheres in water. The affinity of the synthetic “receptor” sites was evaluated in binding experiments using horseradish peroxidase-labelled biotin. Good correlation was found between the modelling results and the performance of the materials in the template re-binding study. The dissociation constants for all MIPs were 1.4-16.8 nM, which is sufficient for most analytical applications where biotin is used as a label.     

Evaluation of new selective molecularly imprinted polymers prepared by precipitation polymerisation for the extraction of phenylurea herbicides

Three different molecularly imprinted polymers (MIPs) have been prepared by precipitation polymerisation using linuron (LIN) or isoproturon (IPN) (phenylurea herbicides) as templates and methacrylic acid (MAA) or trifluormethacrylic acid (TFMAA) as functional monomers. The ability of the different polymers to selectively rebind not only the template but also other phenylurea herbicides has been evaluated. In parallel, the influence of the different templates and functional monomers used during polymers synthesis on the performance of the obtained MIPs was also studied through different rebinding experiments. The experimental binding isotherms were fitted to the Langmuir-Freundlich isotherm allowing to describe the kind of binding sites present in the imprinted polymers under study. It was concluded that TFMAA-based polymer using IPN as template presents the best properties to be used as a selective sorbent for the extraction of phenylurea herbicides.     

The effectively specific recognition of bovine serum albumin imprinted silica nanoparticles by utilizing a macromolecularly functional monomer to stabilize and imprint template

Structural stability of the template is one of the most important considerations during the preparation of protein imprinting technology. To address this limitation, we propose a novel and versatile strategy of utilizing macromolecularly functional monomers to imprint biomacromolecules. Results from circular dichroism and synchronous fluorescence experiments reflect the macromolecularly functional monomers tendency to interact with the protein surface instead of permeating it and destroying the hydrogen bonds that maintain the protein’s structural stability, therefore stabilizing the template protein structure during the preparation of imprinted polymers. The imprinted polymers composed of macromolecularly functional monomers or their equivalent micromolecularly functional monomers over silica nanoparticles were characterized and carried out in batch rebinding test and competitive adsorption experiments. In batch rebinding test, the imprinted particles prepared with macromolecularly functional monomers exhibited an imprinting factor of 5.8 compared to those prepared by micromolecularly functional monomers with the imprinting factor of 3.4. The selective and competitive adsorption experiments also demonstrated the imprinted particles made by macromolecularly functional monomers possessed much better selectivity and specific recognition ability for template protein. Therefore, using macromolecularly functional monomers to imprint may overcome the mutability of biomacromolecule typically observed during the preparation of imprinted polymers, and thus promote the further development of imprinting technology.     

A study of a bio-mimetic recognition material for the BAW sensor by molecular imprinting and its application for the determination of paracetamol in the human serum and urine

A new bio-mimetic bulk acoustic wave (BAW) sensor for paracetamol, with a high selectivity and sensitivity, was fabricated by using the molecularly imprinted polymer (MIP) as the sensing material. Non-covalent molecular imprinting polymers were synthesized simultaneously using two different functional monomers, namely the weakly basic 4-vinylpyridine (4-VP) and the acidic and hydrogen binding methacrylic acid (MAA). Such imprinted polymers improved recognition capability as compared with the polymers that were synthesized using only one of the functional monomers. Dynamic quartz crystal impedance analysis was employed to study the effect of the viscoelasticity of the polymer coating on the measurement. There was no variation in the viscoelasticity during the detection. The sensor was stable and exhibited good reproducibility. Satisfactory results were obtained in the determination of paracetamol in real samples.     

The development of a semiautomated procedure for the synthesis and screening of a large group of molecularly imprinted polymers

A method for synthesis and evaluation of molecularly imprinted polymers (MIPs) on a semiautomated miniature scale is reported. This technique combines molecular imprinting with the combinatorial chemistry approach, allowing rapid screening and optimizations of libraries of MIPs. The polymers were prepared and evaluated in situ by rebinding utilizing powder dispensing and liquid handling systems. MIPs were prepared by a combinatorial approach using methacrylic acid (MAA), 4-vinylpyridine (4-VP), acrylamide, and styrene as functional monomers, and acetonitrile and toluene as porogenic solvents. A drug substance having aromatic, hydroxyl, -O-CONH2 functional groups was selected as the template molecule for this study. The MIP library results demonstrated that the polymer prepared with MAA as functional monomer shows the strongest binding affinity, and therefore, is preferred for the preparation of this particular template molecule. Due to the low consumption of reagents, and more importantly, the demonstrated ability of this method to effectively identify optimal imprinting conditions, this small-scale combinatorial protocol is well suited for fast and efficient screening and optimizations of MIPs.     

Molecularly imprinted polymers for 5-fluorouracil release in biological fluids

The aim of this work was to investigate the possibility of employing Molecularly Imprinted Polymers (MIPs) as a controlled release device for 5-fluorouracil (5-FU) in biological fluids, especially gastrointestinal ones, compared to Non Imprinted Polymers (NIPs). MIPs were synthesized using methacrylic acid (MAA) as functional monomer and ethylene glycol dimethacrylate (EGDMA) as crosslinking agent. The capacity of the polymer to recognize and to bind the template selectively in both organic and aqueous media was evaluated. An in vitro release study was performed both in gastrointestinal and in plasma simulating fluids. The imprinted polymers bound much more 5-Fu than the corresponding non-imprinted ones and showed a controlled/sustained drug release, with MIPs release rate being indeed much more sustained than that obtained from NIPs. These polymers represent a potential valid system for drug delivery and this study indicates that the selective binding characteristic of molecularly imprinted polymers is promising for the preparation of novel controlled release drug dosage form.     

Synthesis of Polyamides and Polyesters Having Various Functional Groups

Polyamides and polyesters having various functional groups have been synthesized either by the polycondensation of functional monomers having a high reactivity or by the modification of unsaturated polymers by means of suitable polymer reactions. Polyamides or polyesters having hydrophilic groups such as hydroxyl group have a high affinity for moisture adsorption and are applicable to membrane uses. Photosensitive polyamides or polyesters were also prepared.     

Quercetin molecularly imprinted polymers: Preparation, recognition characteristics and properties as sorbent for solid-phase extraction

Molecular imprinted polymers (MIPs) were prepared through thermal polymerization by using quercetin as the template molecule, acrylamide (AA) as the functional monomer and ethylene glycol dimethacrylate (EDMA) as the cross-linker in the porogen of tetrahydrofuran (THF). The synthesized MIPs were identified by both Fourier transform infrared (FTIR) and scanning electron microscope (SEM). Systematic investigations of the influences of key synthetic conditions, including functional monomers, porogens and cross-linkers, on the recognition properties of the MIPs were conducted. Scatchard analysis revealed that the homogeneous binding sites were formed in the polymers. Besides quercetin, two structurally similar compounds of rutin and catechol were employed for molecular recognition specificity tests of MIPs. It was observed that the MIPs exhibited the highest selective rebinding to quercetin. Accordingly, the MIPs were used as a solid-phase extraction (SPE) sorbent for the extraction and enrichment of quercetin in cacumen platycladi samples, followed by HPLC-UV analysis. The application of MIPs with high affinity and excellent stereo-selectivity toward quercetin in SPE might offer a novel method for the enrichment and determination of flavonoid compounds in the natural products.     

盐酸强力霉素分子印迹聚合物的制备及分子识别性能

以盐酸强力霉素(DC)为模板分子、甲基丙烯酸为功能单体、乙二醇二甲基丙烯酸酯为交联剂、四氢呋喃(THF)为溶剂.采用本体聚合法制备了DC的分子印迹聚合物.在水溶液中,采用平衡结合方法和Scatchard模型评价了该聚合物的结合特性及识别机理,并考察了DC分子印迹聚合物的选择性吸附能力.结果表明,在所研究的浓度范围内,D...     

环氧功能化双功能磁性分子印迹聚合物的合成及其在多糖吸附中的应用

以淀粉为模板，以3-氨基苯硼酸（APBA）和2-丙烯酰胺-2-甲基丙磺酸（AMPS）为功能单体，以过硫酸铵（APS）为引发剂，在水溶液中成功合成了一种识别多糖的双功能分子印迹聚合物（Bi-MMIPs）。采用透射电镜、扫描电镜、傅里叶变换红外光谱等考察了Bi-MMIPs的合成效果。通过吸附试验深入研究了Bi-MMIPs对淀粉的吸附和识别特性。结果表明：Bi-MMIPs成功负载了两种功能单体，且对多糖（淀粉）具有很强的吸附亲和力和特异性识别能力，饱和吸附量达到13.88 mg/g；对于葡聚糖（M_r 5000 Da和70000 Da）的选择性系数分别为2.67和3.77；此外，Bi-MMIPs的印迹因子（α）达到了3.04，且易于再生。在机理上，APBA和AMPS分别提供可逆共价键和氢键，在合成双功能单体中表现出协同效应，可以有效改善模板分子结合位点的空间排列。     

An orthogonal approach to multifunctional molecularly imprinted polymers

[structure: see text] An "orthogonal" approach to molecularly imprinted polymers has been demonstrated using a crown ether derived monomer that does not exhibit cross-reactivity with other functional monomers. This strategy provides multiple functional groups in the binding site of molecularly imprinted polymers (MIPs) without unproductive interactions between functional monomers. The orthogonal functional group system was shown to act cooperatively in MIPs to bind a template with higher selectivity than any of the individual functional monomers alone.     

Urea host monomers for stoichiometric molecular imprinting of oxyanions

A series of urea-based vinyl monomers was synthesized and investigated for their ability to function as polymerizable hosts for the molecular imprinting of N-Z-D- or L-glutamic acid in polar media (DMSO or DMF). The monomers were synthesized in one step from a polymerizable isocyanate and a nonpolymerizable amine or vice versa, with yields typically over 70%. Prior to polymerization their solution binding properties vis-a-vis tetrabutylammonium benzoate in DMSO were investigated by 1H NMR, UV-vis and fluorescence monitored titrations. The affinities of the urea monomers for benzoate depended upon the substitution pattern of the urea, with all diaryl ureas exhibiting high affinity. EDMA-based imprinted polymers prepared in DMF or DMSO against Z-D-(or L)-glutamic acid using 2 equiv of the urea monomer and 2 equiv of base were able to recognize the imprinted dianion as well as larger molecules containing the glutamic acid substructure. The affinity, reflected in liquid chromatography retention data, correlated with the solution binding properties of the corresponding monomers.     

Molecularly Imprinted Polymer with Calix[4]arene Derivative for the Recognition of Acetanilide

Two molecularly imprinted polymers binding to analgesic acetanilide were prepared using either dual functional monomers of calix[4]arene derivative and acrylamide or single monomer acrylamide, respectively. The polymers were ground, sieved and investigated by equilibrium binding experiment to evaluate their recognition properties for the template and other substrates. Scatchard analysis showed that homogeneous recognition sites were formed in the imprinted polymer matrix. Our results demonstrated that the polymer using two functional monomers exhibited better selectivity for the template. This study may open new frontiers for the development and application of imprinted polymers, such as drug separation and purification.     

Ring-opening metathesis polymerization (ROMP) of isomerically pure functional monomers and acyclic diene metathesis depolymerization (retro-ADMET) of functionalized polyalkenamers

ROMP and retro-acyclic diene metathesis (ADMET) were used for the synthesis of new functional polymers and functional oligomers, respectively. Purely exo and enantiomerically pure norbornene and 7-oxanorbornene derivatives were prepared using stereospecific synthesis, effective fractionation and high yield condensation reactions. Successful ROMPs of those monomers were performed using either the new carbenic Schrock’s or Grubb’s catalysts or in some cases a classical bicomponent catalyst. New functional polymers such as optically active poly(norbornene-2-carboxylic acid), reactive poly(norbornene-2-azlactone), and side-chain liquid crystal polyoxanorbornenes were fully characterized. On the other hand, successful depolymerizations of 1,4-polyisoprene and of epoxidized 1,4-polybutadiene via cross-metathesis with 4-octene were performed using a stabilized bicomponent catalyst and the Grubb’s catalyst, respectively. Conditions for the controlled synthesis of epoxidized oligobutadienes and of epoxydienic monomers via retro-ADMET were clearly defined.     

Computational Design and Fabrication of Enantioselective Recognition Sorbents for L-phenylalanine Benzyl Ester on Multiwalled Carbon Nanotubes Using Molecular Imprinting Technology

Computational strategies have been employed to investigate the influence of the nature of monomers and cross-linker in order to design three dimensional imprinted polymers with selective recognition sites for L-phenylalanine benzyl ester(L-PABE) molecule.Here, computational chemistry methods were applied to screen the molar quantity of functional monomers that interact with one mole of the template molecule. Effects of the nature of functional monomer, cross-linker, and molar ratio were determined computationally using density functional calculations with B3LYP functional and generic 6-31G basis set. Methacrylic acid(MAA) and ethylene glycol dimethacrylate(EGDMA) were used as the functional monomer and crosslinking agent, respectively. L-PABE imprinted polymer layered on multiwalled carbon nanotube(MWCNT) and conventional bulk MIP were synthesised and characterized as well. To investigate the influence of pre-organization of binding sites on the selectivity of L-PABE, respective non-imprinted polymers were also synthesised.MWCNT-MIPs and MIPs exhibited the highest adsorption capacity towards L-PABE. The synthesized polymers revealed characteristic adsorption features and selectivity towards L-PABE in comparison with those of its enantiomer analogues.     

Synthesis of tetracycline‐imprinted polymer microspheres by reversible addition–fragmentation chain‐transfer precipitation polymerization using polyethylene glycol as a coporogen

Tetracycline (TC)‐imprinted microspheres have been synthesized by reversible addition–fragmentation chain‐transfer precipitation polymerization using PEG as a coporogen. In the synthesis, methacrylic acid and ethylene dimethacrylate were used as the functional monomer and cross‐linker, respectively. 2,2′‐Azobisisobutyronitrile was the initiator, and cumyl dithiobenzoate was the chain‐transfer reagent. Although monodispersed microspheres were obtained using acetonitrile as porogen, the particles cannot be used in the column extraction because of the high backpressure. To increase the porosity of the material, PEG was introduced as a coporogen. The influence of the molecular weight and concentration of PEG on the morphology, binding affinity, and porosity of the molecularly imprinted polymers (MIPs) have been studied. The results demonstrated that PEG as a macroporogen increased the porosity of the polymers. Meanwhile, the column backpressure was reduced using the MIPs with higher porosity. The binding affinity of the MIPs was increased when a low concentration of PEG was employed, while it was decreased when the ratio of PEG 12 000/monomers was >0.8%. Under the optimized conditions, TC‐imprinted microspheres with good selectivity and size uniformity have been obtained, which facilitates its application in the column extraction for TC determinations.