Trap-controlled behavior in ultrathin Lu2O3 high-k gate dielectrics

Amorphous Lu₂O₃ high-k gate dielectrics were grown directly on n-type (100) Si substrates by the pulsed laser deposition (PLD) technique. High-resolution transmission electron microscope (HRTEM) observation illustrated that the Lu₂O₃ film has amorphous structure and the interface with Si substrate is free from amorphous SiO₂. An equivalent oxide thickness (EOT) of 1.1 nm with a leakage current density of 2.6×10⁻⁵ A/cm² at 1 V accumulation bias was obtained for 4.5 nm thick Lu₂O₃ thin film deposited at room temperature followed by post-deposition anneal (PDA) at 600 °C in oxygen ambient. The effects of PDA process and light illumination were studied by capacitance-voltage (C-V) and current density-voltage (J-V) measurements. It was proposed that the net fixed charge density and leakage current density could be altered significantly depending on the post-annealing conditions and the capability of traps to trap and release charges.     

In vitro evaluation of bioactivity of CaO-SiO2-P2O5-Na2O-Fe2O3 glasses

Glasses with compositions 41CaO(52 − x)SiO₂4P₂O₅·xFe₂O₃3Na₂O (2 ≤ x ≤ 10 mol.%) were prepared by melt quenching method. Bioactivity of the different glass compositions was studied in vitro by treating them with simulated body fluid (SBF). The glasses treated for various time periods in SBF were evaluated by examining apatite formation on their surface using grazing incidence X-ray diffraction, Fourier transform infrared reflection spectroscopy, scanning electron microscopy and energy dispersive spectroscopy techniques. Increase in bioactivity with increasing iron oxide content was observed. The results have been used to understand the evolution of the apatite surface layer as a function of immersion time in SBF and glass composition.     

Surface sprouting growth of Na2Nb2O6·H2O nanowires and fabrication of NaNbO3 nanostructures with controlled morphologies

The one-dimensional (1D) Sandia octahedral molecular sieves (SOMS) Na₂Nb₂O₆·H₂O nanowires were prepared by the reaction of Nb powder with NaOH via a one-step hydrothermal methods. The products were characterized by SEM, TEM, XRD, IR and EDX. A plausible sprouting growth mechanism is proposed for the formation of Na₂Nb₂O₆·H₂O nanowires based on the systematic investigation. Na₂Nb₂O₆·H₂O nanoribbons-based complex flowerlike structure were first grew on the metallic niobium surface, the growth process of SOMS nanowire is similar to the plant seed sprouting and growing, Na₂Nb₂O₆·H₂O nanowires were finally formed at the depletion of metallic niobium powder. In the end, we showed that Na₂Nb₂O₆·H₂O nanowires is hydrothermally synthesized in the 15 M NaOH solution at 423 K, which can be easily converted into NaNbO₃ nanowires by calcination, while the NaNbO₃ cubes were obtained through the same hydrothermal process at a higher temperature of 453 K.     

A Brillouin study of the temperature-dependence of the acoustic modes across the insulator-metal transitions in V2O3 and Cr-doped V2O3

Brillouin scattering studies have been carried out on high-quality single crystals of undoped and 0.9% Cr-doped V₂O₃. The observed modes in both the samples at ∼12 and ∼60 GHz are associated with the surface Rayleigh wave (SRW) and bulk acoustic wave (BAW), respectively. In the undoped sample, the mode frequencies of the SRW and BAW modes decrease as the temperature is lowered from room temperature to the insulator-metal transition temperature (T_IM=T_N=∼130 K). Below the transition, the modes show hardening. In the doped sample, the SRW mode shows a similar temperature-dependence as the undoped one, but the BAW mode shows hardening from room temperature down to the lowest temperature (50 K). This is the first measurement of the sound velocity below T_IM in the V₂O₃ system. The softening of the SRW frequency from 330 K to T_IM can be qualitatively understood on the basis of the temperature-dependence of C₄₄, which, in turn, is related to the orbital fluctuations in the paramagnetic metallic phase. The hardening of the mode frequencies below T_IM suggests that C₄₄ must increase in the antiferromagnetic insulating phase, possibly due to the orbital ordering.     

Low field magnetoresistance and conduction noise in layered manganite La1.4Ca1.6Mn2O7

Temperature dependence of conduction noise and low field magnetoresistance of layered manganite La_1.4Ca_1.6Mn₂O₇ (DLCMO) are reported and compared with the infinite layered manganite La_0.7Ca_0.3MnO₃ (LCMO). The double layered manganite was prepared using standard solid state reaction method and had a metal-insulator transition temperature (T_M-I) of 155 K. The temperature dependence of susceptibility showed evolution of ferromagnetic ordering at 168 K. The observed voltage noise spectral density (S_V) shows 1/f^α type of behaviour at all temperatures from 77 K to 300 K. In the ferromagnetic region (T<168 K), S_V/V² shows two peaks at 164 K and 114 K. The observed two peaks in normalised conduction noise of DLCMO is attributed to the excess noise generated due to setting up of short range 2D-ferromagnetic ordering and long range 3D-ferromagnetic ordering at two different temperatures T_C2 and T_C1. In temperature range between T_C1 and T_C2, the magnetoresistance (MR) showed a gradual increase with the magnetic field. The observed MR has been explained in the framework of the two phase model [ferromagnetic (FM) domains and paramagnetic (PM) regions].     

Heat capacity and magnetic properties of pyrochlore Hg2Os2O7

Hg₂Os₂O₇, which has the cubic pyrochlore structure, remains metallic down to the liquid helium temperature unlike its isostructural counterpart Cd₂Os₂O₇, which shows metal-insulator transition at 226 K. Magnetization and heat capacity data for Hg₂Os₂O₇ are presented. The magnetic anomaly at T_N=88 K shares many characteristics in common with the metal-insulator transition in Cd₂Os₂O₇, though Hg₂Os₂O₇ remains metallic below T_N. The heat capacity C_p shows no or very little change in the magnetic entropy around T_N, supporting the view that there is no long-range ordering of localized spins. The measured value of electronic heat-capacity coefficient γ=21 mJ K⁻²mol⁻¹ is comparable to the value obtained from band-structure calculation on Cd₂Os₂O₇, suggesting that mass-enhancement is small in Hg₂Os₂O₇. There is a pronounced peak in C_p/T³ at 13.1 K, which corresponds to a peak in the phonon density of states at 40 cm⁻¹.     

Effect of Bi2O3 on EPR, optical transmission and DC conductivity of vanadyl doped alkali bismuth borate glasses

Glasses with composition xBi₂O₃·(30−x)M₂O·70B₂O₃ (M=Li, Na) containing 2 mol% V₂O₅ have been prepared over the range 0≤x≤15 (x is in mol%). The electron paramagnetic resonance spectra of VO²⁺ of these glasses have been recorded in the X-band (≈9.3 GHz) at room temperature (RT≈300 K). Spin Hamiltonian parameters, g_∥, g_⊥, A_∥, A_⊥, dipolar hyperfine coupling parameter, P, and Fermi contact interaction parameter, K, have been calculated. The molecular orbital coefficients, α² and γ², have been calculated by recording the optical transmission spectra. In xBi₂O₃·(30−x)Li₂O·70B₂O₃ glasses there is decrease in the tetragonality of the V⁴⁺O₆ complex for x up to 6 mol% whereas for x≥6 mol%, tetragonality increases. In xBi₂O₃·(30−x)Na₂O·70B₂O₃ glasses there is increase in the tetragonality of the V⁴⁺O₆ complex with increasing x. The 3d_xy orbit expands with increase in Bi₂O₃:M₂O ratio. Values of the theoretical optical basicity, Λ_th, have also been reported. The DC conductivity increases with increase in temperature. The order of conductivity is 10⁻⁵ ohm⁻¹ m⁻¹ at low temperature and 10⁻³ ohm⁻¹ m⁻¹ at high temperature. The DC conductivity decreases and the activation energy increases with increase in Bi₂O₃:M₂O ratio.     

Electrical and photocatalytic properties of Na2Ti6O13 nanobelts prepared by molten salt synthesis

Single-crystalline Na₂Ti₆O₁₃ nanobelts were prepared on large-scale by molten salt synthesis at 825 °C for 3 h. The obtained nanobelts have typical width of less than 200 nm and thickness of 10-30 nm, and length up to 10 μm. The growth direction of the nanobelts was determined to be along [0 1 0]. Electrical transport property of an individual nanobelt was measured at room temperature and ambient atmosphere, and results showed that the nanobelts are semiconductor. Na₂Ti₆O₁₃ nanobelts exhibited good photocatalytic efficiency for the degradation of RhB under UV irradiation.     

Electrical properties vs. microstructure of nanocrystallized V2O5-P2O5 glasses — An extended temperature range study

An electronically conducting nanomaterial was synthesized by nanocrystallization of a 90V₂O₅·10P₂O₅ glass and its electrical properties were studied in an extended temperature range from − 170 to + 400 °C. The conductivity of the prepared nanomaterial reaches 2 ? 10^− 1 S cm^− 1 at 400 °C and 2 ? 10^− 3 S cm^− 1 at room temperature. It is higher than that of the original glass by a factor of 25 at room temperature and more than 100 below − 80 °C. A key role in the conductivity enhancement was ascribed to the material's microstructure, and in particular to the presence of the large number of small (ca. 20 nm) grains of crystalline V₂O₅. The observed conductivity dependencies are discussed in terms of the Mott's theory of the electronic hopping transport in disordered systems. Since V₂O₅ is known for its ability to intercalate lithium, the presented results might be helpful in the development of cathode materials for Li-ion batteries.     

Effect of WO3 on EPR, structure and electrical conductivity of vanadyl doped WO3·M2O·B2O3 (M=Li, Na) glasses

Glasses with composition xWO₃·(30−x)M₂O·70B₂O₃ (M=Li, Na; 0≤x≤15) doped with 2 mol% V₂O₅ have been prepared using the melt-quench technique. The electron paramagnetic resonance spectra have been recorded in X-band (ν≈9.14 GHz) at room temperature (RT). The spin Hamiltonian parameters, dipolar hyperfine coupling parameter and Fermi contact interaction parameter have been calculated. It is observed that the resultant resonance spectra contain hyperfine structures (hfs) only due to V⁴⁺ ions, which exist as VO²⁺ ions in octahedral coordination with a tetragonal compression in the present glass system. The tetragonality increases with WO₃:M₂O ratio and also there is an expansion of 3d_xy orbit of unpaired electron in the vanadium ion. The study of IR transmission spectra over a range 400-4000 cm⁻¹ depicts the presence of WO₆ group. The DC conductivity (σ) has been measured in the temperature range 423-623 K and is found to be predominantly ionic.     

Structural investigation of xAg2O·(100−x)·[2B2O3·As2O3] glasses doped with manganese ions

Structural analysis of x[(100−y)Ag₂O·yMnO]·(100−x)[2B₂O₃·As₂O₃] glasses, with x=10 mol% and 0≤y≤10 mol%, was performed by means of FT-IR and FT-Raman spectroscopies. The purpose of this work is to investigate the structural changes that appear in the xAg₂O·(100−x)·[2B₂O₃·As₂O₃] glasses with the addition and increase in manganese ions content. FT-IR measurements revealed the presence of pyro-, ortho-, di-, tri-, tetra- and penta-borate groups and structural units characteristic to As₂O₃ in the structure of the studied glasses. FT-IR spectroscopy measurements also show that BO₃ units are the main structural units of the glass system. The presence of structural units characteristic to Ag₂O were not directly evidenced by FT-IR spectroscopy. In addtition, the FT-Raman analysis evidenced the presence of boroxol rings in the structure of the studied glasses.     

Writing of two-dimensional crystal curved lines at the surface of Sm2O3-Bi2O3-B2O3 glass by samarium atom heat processing

Two-dimensional crystal curved lines consisting of the nonlinear optical Sm_xBi_1−xBO₃ phase are fabricated at the surface of 8Sm₂O₃·37Bi₂O₃·55B₂O₃ glass by continuous wave Nd:YAG laser (wavelength: 1064 nm) irradiation (samarium atom heat processing) with a power of ∼0.9 W and a laser scanning speed of 5 μm/s. The curved lines with bending angles of 0-90° or with sine-shapes are written by just changing the laser scanning direction. The polarized micro-Raman scattering spectra for the line after bending are the same as those for the line before bending, indicating that the crystal plane of Sm_xBi_1−xBO₃ crystals to the crystal growth direction might be maintained even after the change in the laser scanning direction. It is found from laser scanning microscope observations that the crystal lines at the surface are swelled out smoothly, giving a height of about 10 μm.     

The structure and magnetic properties of Zn1−xNixFe2O4 ferrite nanoparticles prepared by sol–gel auto-combustion

Zn_1−xNi_xFe₂O₄ ferrite nanoparticles were prepared by sol–gel auto-combustion and then annealed at 700 °C for 4 h. The results of differential thermal analysis indicate that the thermal decomposition temperature is about 210 °C and Ni–Zn ferrite nanoparticles could be synthesized in the self-propagating combustion process. The microstructure and magnetic properties were investigated by means of X-ray diffraction, scanning electron microscope, and Vibrating sample magnetometer. It is observed that all the spherical nanoparticles with an average grain size of about 35 nm are of pure spinel cubic structure. The crystal lattice constant declines gradually with increasing x from 0.8435 nm (x=0.20) to 0.8352 nm (x=1.00). Different from the composition of Zn_0.5Ni_0.5Fe₂O₄ for the bulk, the maximum M_s is found in the composition of Zn_0.3Ni_0.7Fe₂O₄ for nanoparticles. The H_c of samples is much larger than the bulk ferrites and increases with the enlarging x. The results of Zn_0.3Ni_0.7Fe₂O₄ annealed at different temperatures indicate that the maximum M_s (83.2 emu/g) appears in the sample annealed at 900 °C. The H_c of Zn_0.3Ni_0.7Fe₂O₄ firstly increases slightly as the grain size increases, and presents a maximum value of 115 Oe when the grains grow up to about 30 nm, and then declines rapidly with the grains further growing. The critical diameter (under the critical diameter, the grain is of single domain) of Zn_0.3Ni_0.7Fe₂O₄ nanoparticles is found to be about 30 nm.     

Synthesis,photophysical properties,and photocatalytic applications of Bi doped NaTaO3 and Bi doped Na2Ta2O6 nanoparticles

Phase formation and photophysical properties of bismuth doped sodium tantalum oxide (perovskite, defect pyrochlore) nanoparticles prepared by a hydrothermal method were studied in detail. It was revealed that the synthesis conditions like NaOH concentration and bismuth precursor (NaBiO₃·2H₂O) markedly affect the crystal structure of sodium tantalum oxide. At low NaOH concentration and high bismuth precursor (NaBiO₃·2H₂O) content, Bi doped Na₂Ta₂O₆ (defect pyrochlore) phase was predominantly formed, while at higher NaOH concentration, Bi doped NaTaO₃ (perovskite) phase was formed. It was observed that the defect pyrochlore (Bi doped Na₂Ta₂O₆) phase was formed and stabilized by the presence of dopant precursor (NaBiO₃·2H₂O). The chemical analysis of the samples confirmed the doping of Bi³⁺ cations in both phases. Doping of bismuth enabled visible light absorption up to 500 nm in perovskite and defect pyrochlore type sodium tantalum oxide. Bi doped NaTaO₃ samples showed better performance for the photocatalytic degradation of rhodamine B than that of Bi doped Na₂Ta₂O₆, under visible light irritation (λ>420 nm). The present results shed light on phase formation of sodium tantalate and these results are useful in understanding properties of NaTaO₃ based compounds, synthesized by the hydrothermal method.     

Dielectric dispersion in PbO-Sb2O3-As2O3:V2O5 glasses

Dielectric properties, viz. dielectric constant ε′, loss tan δ and a.c conductivity σ_ac (over a wide range of frequency and temperature) and dielectric breakdown strength of PbO-Sb₂O₃-As₂O₃ glasses doped with V₂O₅ (ranging from 0 to 0.5 mol%) are studied. Analysis of these results, based on optical absorption and ESR spectra, indicates that the insulating strength of the glasses is comparatively high when the concentration of V₂O₅ is about 0.3 mol% in the glass matrix.     

Microwave-assisted synthesis of SrFe12O19 hexaferrites

Ultra-fine and homogeneous SrFe₁₂O₁₉ hexaferrites were synthesized by a microwave-assisted calcination route. The calcined precursors were prepared by a sol-gel auto-combustion method using Fe(NO₃)₃·9H₂O, Sr(NO₃)₂ and citric acid as starting materials. The structures, powder morphology and magnetic properties of the products were characterized by X-ray diffraction, scanning electron microscope and vibrating sample magnetometer. The results showed that microwaves are helpful to reduce the calcination temperature and shorten the calcination time. The ferrites with saturation magnetization, remanence and intrinsic coercivity of 54.80 emu/g, 29.52 emu/g and 5261 Oe, respectively, were obtained in samples calcined at 800 °C for 80 min.     

Electrical behavior of BaZr0.1Ti0.9O3 and BaZr0.2Ti0.8O3 thin films

BaZr_0.1Ti_0.9O₃ and BaZr_0.2Ti_0.8O₃ (BZT) thin films were deposited on Pt/Ti/LaAlO₃ (1 0 0) substrates by radio-frequency magnetron sputtering, respectively. The films were further annealed at 800 °C for 30 min in oxygen. X-ray diffraction θ-2θ and Φ-scans showed that BaZr_0.1Ti_0.9O₃ films displayed a highly (h 0 0) preferred orientation and a good cube-on-cube epitaxial growth on the LaAlO₃ (1 0 0) substrate, while there are no obvious preferential orientation in BaZr_0.2Ti_0.8O₃ thin films. The BaZr_0.1Ti_0.9O₃ films possess larger grain size, higher dielectric constant, larger tunability, larger remanent polarization and coercive electric field than that of BaZr_0.2Ti_0.8O₃ films. Whereas, BaZr_0.1Ti_0.9O₃ films have larger dielectric losses and leakage current density. The results suggest that Zr⁴⁺ ion can decrease dielectric constant and restrain non-linearity. Moreover, the enhancement in dielectric properties of BaZr_0.1Ti_0.9O₃ films may be attributed to (1 0 0) preferred orientation.     

Synthesis of Fe3O4 nanoparticles without inert gas protection used as precursors of magnetic fluids

Fe₃O₄ nanoparticles were hydrothermally synthesized under continuous microwave irradiation from FeCl₃·6H₂O and FeSO₄·7H₂O aqueous solutions, using NH₄OH as precipitating reagent and N₂H₄·H₂O as oxidation-resistant reagent. The results of X-ray powder diffraction (XRD), FT–IR spectroscopy and scanning electron microscopy (SEM) measurements showed that the synthesized magnetite (Fe₃O₄) nanoparticles had an average diameter of 10 nm. The magnetic properties of the Fe₃O₄ nanoparticles were measured using a vibrating sample magnetometer (VSM), indicating that the nanoparticles possessed high saturation magnetization at room temperature. The Fe₃O₄ nanoparticles were used to prepare magnetic fluids (MFs) based on water, and the properties of the MFs were characterized by a Gouy magnetic balance, a capillary rheometer and a rotating rheometer, respectively.     

Magnetic and bioactivity evaluation of ferrimagnetic ZnFe2O4 containing glass ceramics for the hyperthermia treatment of cancer

Glass ceramics of the composition xZnO·25Fe₂O₃·(40−x)SiO₂·25CaO·7P₂O₅·3Na₂O were prepared by the melt-quench method using oxy-acetylene flame. Glass-powder compacts were sintered at 1100 °C for 3 h and then rapidly cooled at −10 °C. X-ray diffraction (XRD) revealed 3 prominent crystalline phases: ZnFe₂O₄, CaSiO₃ and Ca₁₀(PO₄)₆(OH)₂. Vibrating sample magnetometer (VSM) data at 10 KOe and 500 Oe showed that saturation magnetization, coercivity and hence hysteresis area increased with the increase in ZnO content. Nano-sized ZnFe₂O₄ crystallites were of pseudo-single domain structure and thus coercivity increased with the increase in crystallite size. ZnFe₂O₄ exhibited ferrimagnetism due to the random distribution of Zn²⁺ and Fe³⁺ cations at tetrahedral A sites and octahedral B sites. This inversion/random distribution of cations was probably due to the surface effects of nano-ZnFe₂O₄ and rapid cooling of the material from 1100 °C (thus preserving the high temperature state of the random distribution of cations). Calorimetric measurements were carried out using magnetic induction furnace at 500 Oe magnetic field and 400 KHz frequency. The data showed that maximum specific power loss and temperature increase after 2 min were 26 W/g and 37 °C, respectively for the sample containing 10% ZnO. The samples were immersed in simulated body fluid (SBF) for 3 weeks. Scanning electron microscope (SEM), energy dispersive spectroscopy (EDX) and XRD results confirmed the growth of precipitated hydroxyapatite phase after immersion in SBF, suggesting that the ferrimagnetic glass ceramics were bioactive and could bond to the living tissues in physiological environment.     

Temperature dependence of the work function of Bi2Sr2CaCu2O8 single crystal cleaved at low temperature

We measured the anomalous change in the work function of Bi₂Sr₂CaCu₂O₈ around a critical temperature (T_c ≈ 85 K). The work function becomes a minimum at T_c; the work function decreases in a normal-conductive state and then increases in a superconductive state as the temperature decreases. An increase in the work function for a transition from a normal-conductive state to a superconductive state at 0 K is about 9 meV. The contribution of the chemical potential and the surface dipole barrier to the work function are discussed.