Structural and magnetic properties of MnxCo1−xFe2O4 ferrite nanoparticles

We report on the structural and magnetic properties of nanoparticles of Mn_xCo_1−xFe₂O₄ (x=0.1, 0.5) ferrites produced by the glycothermal reaction. From the analysis of XRD spectra and TEM micrographs, particle sizes of the samples have been found to be about 8 nm (for x=0.1) and 13 nm (for x=0.5). The samples were characterized by DC magnetization in the temperature range 5-380 K and in magnetic fields of up to 40 kOe using a SQUID magnetometer. Mössbauer spectroscopy results show that the sample with higher Mn content has enhanced hyperfine fields after thermal annealing at 700 °C. There is a corresponding small reduction in hyperfine fields for the sample with lower Mn content. The variations of saturation magnetization, remnant magnetization and coercive fields as functions of temperature are also presented. Our results show evidence of superparamagnetic behaviour associated with the nanosized particles. Particle sizes appear to be critical in explaining the observed properties.     

Synthesis and magnetic properties of ferrites spinels MgxCu1−xFe2O4

Polycrystalline Mg_0.6Cu_0.4Fe₂O₄ ferrites have been prepared using solid-state reaction technique. Their structural and magnetic properties have been studied, using X-ray diffraction and magnetic measurements.Using mean field theory and high-temperature series expansions (HTSE), extrapolated with the padé approximants method, the magnetic properties of Mg_1−xCu_xFe₂O₄ have been studied. The nearest neighbor super-exchange interactions for intra-site and inter-site of the Mg_1−xCu_xFe₂O₄ ferrites spinels, in the range 0≤x≤1, have been computed using the probability approach, based on Mössbauer data. The Curie temperature T_c is calculated as a function of Mg concentration. The obtained theoretical results are in good agreement with experimental ones obtained by magnetic measurements.     

Critical behaviour and magnetic properties of A-B spinel ZnxCu1−xFe2O4

Polycrystalline Zn_0.6Cu_0.4Fe₂O₄ ferrites have been prepared using a solid-state reaction technique. Their structural and magnetic properties have been studied, using X-ray diffraction and Mössbauer and magnetic measurements. These results have been compared to a more general theoretical study, on Zn_xCu_1−xFe₂O₄, based on mean field theory and high-temperature series expansions (HTSE), and extrapolated with the Padé approximant method. The nearest neighbour super-exchange interactions for the intra-site and the inter-site of Zn_xCu_1−xFe₂O₄ spinel ferrites, in the range 0≤x≤1, have been computed using the probability approach, based on Mössbauer data. The Curie temperature T_C is calculated as a function of Zn concentration. The theoretical results obtained are in good agreement with the experimental results obtained by magnetic measurements.     

Mössbauer studies and magnetic studies of Ni doped orthoferrites PrFe1−xNixO3 (x≤0.3)

The magnetic properties of polycrystalline PrFe_1−xNi_xO₃ (x≤0.3) system were studied using Mössbauer spectroscopy and magnetization measurements. The Mossbauer spectra exhibit six line spectra which loses its sharpness as the Ni substitution increases within the system. As the Ni concentration in the system increases, the hyperfine field and isomer shift shows decrease, which is vivid from the sluggish nature of the sextets. The small value of quadrupole splitting confirms the octahedral environment of the Fe⁺³ ions. The magnetization curves show the reversible behavior and represent the fall in negative molecular field leading to AFM frustration. From these results, we conclude that sagging in the spectra reveals the change from antiferromagnetic state to ferromagnetic state, which can be attributed to mixed state of Fe⁺³ ions i.e. high spin (HS) and low spin (LS) which is a consequence of progressive collapse of Hund’s rule due to HS→LS transition. These results confirm the weak ferromagnetic component due to canted-AFM spin arrangement of Fe³⁺ magnetic moments.     

Magnetic hysteresis loop shift in NiFe2O4 nanocrystalline powder with large grain boundary fraction

Magnetic properties of nanocrystalline NiFe₂O₄ spinel mechanically processed for 350 h have been studied using temperature dependent from both zero-field and in-field ⁵⁷Fe Mössbauer spectrometry and magnetization measurements. The hyperfine structure allows us to distinguish two main magnetic contributions: one attributed to the crystalline grain core, which has magnetic properties similar to the NiFe₂O₄ spinel-like structure (n-NiFe₂O₄) and the other one due to the disordered grain boundary region, which presents topological and chemical disorder features (d-NiFe₂O₄). Mössbauer spectrometry determines a large fraction for the d-NiFe₂O₄ region (62% of total area) and also suggests a speromagnet-like structure for it. Under applied magnetic field, the n-NiFe₂O₄ spins are canted with angle dependent on the applied field magnitude. Mossbauer data also show that even under 120 kOe no magnetic saturation is observed for the two magnetic phases. In addition, the hysteresis loops, recorded for scan field of 50 kOe, are shifted in both field and magnetization axes, for temperatures below about 50 K. The hysteresis loop shifts may be due to two main contributions: the exchange bias field at the d-NiFe₂O₄/n-NiFe₂O₄ interfaces and the minor loop effect caused by a high magnetic anisotropy of the d-NiFe₂O₄ phase. It has also been shown that the spin configuration of the spin-glass like phase is modified by the consecutive field cycles, consequently the n-NiFe₂O₄/d-NiFe₂O₄ magnetic interaction is also affected in this process.     

Studies on Structural, Magnetic and Thermal Properties of xFe2TiO4-(1−x)Fe3O4 (0≤x≤1) Pseudo-binary System

The xFe₂TiO₄-(1−x)Fe₃O₄ pseudo-binary systems (0≤x≤1) of ulvöspinel component were synthesized by solid-state reaction between ulvöspinel Fe₂TiO₄ precursors and commercial Fe₃O₄ powders in stochiometric proportions. Crystalline structures were determined by X-ray powder diffraction (XRD) and it was found that the as-obtained titanomagnetites maintain an inverse spinel structure. The lattice parameter a of synthesized titanomagnetite increases linearly with the increase in the ulvöspinel component. ⁵⁷Fe room temperature Mössbauer spectra were employed to evaluate the magnetic properties and cation distribution. The hyperfine magnetic field is observed to decrease with increasing Fe₂TiO₄ component. The fraction of Fe²⁺ in both tetrahedral and octahedral sites increases with the increase in Ti⁴⁺ content, due to the substitution and reduction of Fe³⁺ by Ti⁴⁺ that maintains the charge balance in the spinel structure. For x in the range of 0 ≤x≤0.4, the solid solution is ferrimagnetic at room temperature. However, it shows weak ferrimagnetic and paramagnetic behavior for x in the range of 0.4<x≤0.7. When x>0.70, it only shows paramagnetic behavior, with the appearance of quadrupole doublets in the Mössbauer spectra. Simultaneous differential scanning calorimetry and thermogravimetric analysis (DSC-TGA) studies showed that magnetite is not stable, and thermal decomposition of magnetite occurs with weight losses accompanying with exothermic processes under heat treatment in inert atmosphere.     

Synthesis and characterization of the xZnO-(1−x)α-Fe2O3 nanoparticles system

The xZnO-(1−x)α-Fe₂O₃ nanoparticles system has been obtained by mechanochemical activation for x=0.1, 0.3 and 0.5 and for ball milling times ranging from 2 to 24 h. Structural and morphological characteristics of the zinc-doped hematite system were investigated by X-ray diffraction (XRD) and Mössbauer spectroscopy. The Rietveld structure of the XRD spectra yielded the dependence of the particle size and lattice constant on the amount x of Zn substitutions and as function of the ball milling time. The x=0.1 XRD spectra are consistent with line broadening as Zn substitutes Fe in the hematite structure and the appearance of the zinc ferrite phase at milling times longer than 4 h. Similar results were obtained for x=0.3, while for x=0.5 the zinc ferrite phase occurred at 2 h and entirely dominated the spectrum at 24 h milling time. The Mössbauer spectra corresponding to x=0.1 exhibit line broadening as the ball milling time increases, in agreement with the model of local atomic environment. Because of this reason, the Mössbauer spectrum for 12 h of milling had to be fitted with two sextets. For x=0.3 and 12 milling hours, the Mössbauer spectrum reveals the occurrence of a quadrupole-split doublet, with the hyperfine parameters characteristic to zinc ferrite, ZnFe₂O₄. This doublet clearly dominates the Mössbauer spectrum for x=0.5 and 24 h of milling, demonstrating that the entire system of nanoparticles consists finally of zinc ferrite. As ZnO is not soluble in hematite in the bulk form, the present study clearly demonstrates that the solubility limits of an immiscible system can be extended beyond the limits in the solid state by mechanochemical activation. Moreover, this synthesis route allowed us to reach nanometric particle dimensions, which would make the materials very important for gas sensing applications.     

化学合成的钯改性的NiFe2O4纳米颗粒的结构和磁性

采用溶胶-凝胶自动燃烧方法合成了镍铁-钯复合材料NiFe₂O₄-Pd的磁性纳米颗粒. 样品在800 ℃烧结6 h生成结晶相. X射线衍射证实样品呈尖晶石结构. 利用场发射扫描电子显微镜研究结构形态和纳米颗粒的大小. 饱和磁化强度在100和300 K时,随着钯含量增加达5%降低,但加入10%Pd时磁化强度突然上升.     

Magnetic response of NiFe2O4 nanoparticles in polymer matrix

We report the magnetic properties of magnetic nano-composite, consisting of different quantity of NiFe₂O₄ nanoparticles in polymer matrix. The nanoparticles exhibited a typical magnetization blocking, which is sensitive on the variation of magnetic field, mode of zero-field-cooled/field-cooled experiments and particle quantity in the matrix. The samples with lower particle quantity showed an upturn of magnetization down to 5 K, whereas the blocking of magnetization dominates at lower temperatures as the particle quantity increases in the polymer. We examine such magnetic behaviour in terms of the competitive magnetic ordering between core and surface spins of nanoparticles, taking into account the effect of inter-particle (dipole-dipole) interactions on nanoparticle magnetic dynamics.     

Structural and magnetic characteristics of Co1−xNix/2Srx/2Fe2O4 nanoparticles

Co_1−xNi_x/2Sr_x/2Fe₂O₄ (x=0–0.5 in steps of 0.1) ferrite nanoparticles have been synthesized at room temperature, without calcination, using a reverse micelle process. The site preference was determined by Mössbauer spectroscopy at 300 K. The hyperfine parameters were obtained, for the whole series of solid solutions. For the X≤0.20 samples, the spectra were fitted with two discrete sextets and for the X>0.20 samples, a magnetic hyperfine field distribution and a doublet were also imposed in the fit procedure. Hysteresis loops were measured using a superconducting quantum interference device magnetometer at 2 K and 300 K. The results indicate that the relative decrease in saturation magnetization of nanoparticles compared to the submicron particles could be attributed to a surface spin termination and disorder. Magnetic dynamics of the nanoparticles was studied by the measurement of ac magnetic susceptibility versus temperature at different frequencies and it is found that the results are well described by the Vogel–Fulcher model.     

Hydrothermal synthesis and structural characterization of (1−x)α-Fe2O3-xSnO2 nanoparticles

Structural and morphological characteristics of (1−x)α-Fe₂O₃-xSnO₂ (x=0.0-1.0) nanoparticles obtained under hydrothermal conditions have been investigated by X-ray diffraction (XRD), transmission Mössbauer spectroscopy, scanning and transmission electron microscopy as well as energy dispersive X-ray analysis. On the basis of the Rietveld structure refinements of the XRD spectra at low tin concentrations, it was found that Sn⁴⁺ ions partially substitute for Fe³⁺ at the octahedral sites and also occupy the interstitial octahedral sites which are vacant in α-Fe₂O₃ corundum structure. A phase separation of α-Fe₂O₃ and SnO₂ was observed for x≥0.4: the α-Fe₂O₃ structure containing tin decreases simultaneously with the increase of the SnO₂ phase containing substitutional iron ions. The mean particle dimension decreases from 70 to 6 nm, as the molar fraction x increases up to x=1.0. The estimated solubility limits in the nanoparticle system (1−x)α-Fe₂O₃-xSnO₂ synthesized under hydrothermal conditions are: x≤0.2 for Sn⁴⁺ in α-Fe₂O₃ and x≥0.7 for Fe³⁺ in SnO₂.     

Temperature-dependent Fe Mössbauer spectroscopy and local structure of the mullite-type Bi2(FexGa1−x)4O9 (0.1≤x≤1) solid solution

The Bi₂(Fe_xGa_1−x)₄O₉ oxide solid solution possessing a mullite-type structure has been investigated by ⁵⁷Fe Mössbauer spectroscopy in dependence of composition (0.1≤x≤1) and temperature (293≤T/K≤1073). The spectra have been fitted with two doublets for tetrahedrally and octahedrally coordinated high-spin Fe³⁺ ions, respectively. The experimental areas of the subspectra were used to determine the distribution of iron on the two inequivalent structural sites. The fraction of iron cations occupying the octahedral site is found to increase with decreasing Fe content and the cation distribution is almost independent of temperature. The unusual temperature dependence of the quadrupolar splitting, QS, observed for the octahedral site with dQS/dT>0 is discussed in connexion with structural data for Bi₂Fe₄O₉. The temperature dependence of Mössbauer isomer shifts and signal intensities is examined in the context of local vibrational properties of iron on the two inequivalent sites of the mullite-type lattice structure.     

Effects of annealing temperature on structure and magnetic properties of CoAl0.2Fe1.8O4/SiO2 nanocomposites

CoAl_0.2Fe_1.8O₄/SiO₂ nanocomposites were prepared by sol–gel method. The effects of annealing temperature on the structure and magnetic properties of the samples were studied by X-ray diffraction, transmission electron microscopy, vibrating sample magnetometer and Mössbauer spectroscopy. The results show that the CoAl_0.2Fe_1.8O₄ in the samples exhibits a spinel structure after being annealed. As annealing temperature increases from 800 to 1200 °C, the average grain size of CoAl_0.2Fe_1.8O₄ in the nanocomposites increases from 5 to 41 nm while the lattice constant decreases from 0.8397 to 0.8391 nm, the saturation magnetization increases from 21.96 to 41.53 emu/g. Coercivity reaches a maximum of 1082 Oe for the sample annealed at 1100 °C, and thereafter decreases with further increasing annealing temperature. Mössbauer spectra show that the isomer shift decreases, hyperfine field increases and the samples transfer from mixed state of superparamagnetic and magnetic order to the completely magnetic order with annealing temperature increasing from 800 to 1200 °C.     

Magnetic frustration effect in polycrystalline Ga2−xFexO3

In Ga_2−xFe_xO₃ with the Pc2₁n orthorhombic structure, owing to the site disorder of Fe ions on the four nonequivalent sites of Fe1, Fe2, Ga1, and Ga2, there exists a significant amount of non-effective Fe ions with no contribution to the ferrimagnetic ordering. These non-effective Fe ions have been found to induce strong frequency dependent suppression of the peak height in the ac susceptibility, demonstrating the frustration effect in the ferrimagnetic ordering background.     

Magnetic properties and magnetic structures of Sr3−xCaxRu2O7

We have measured magnetization curves and powder neutron diffraction of double-layered Ruddlesden-Popper type ruthenate Sr_3−xCa_xRu₂O₇ (x=1.5, 2.0 and 3.0). The field dependence of the magnetization revealed that the transition field of metamagnetic transition along the b-axis shifted to lower fields and that the transition became broad with increasing Sr content. The slope of the magnetization curve also increased with increasing Sr content below the metamagnetic transition. These results indicate that an itinerant component is partly introduced by the Sr substitution. From the magnetic reflection, on cooling below T_N, an additional reflection was observed at (0 0 1) for each x, and the amplitude increased with decreasing temperature. The observed diffraction patterns are very similar to those of Ca₃Ru₂O₇. We conclude that the magnetic structure of the antiferromagnetic ordered phase is basically the same structure with that of Ca₃Ru₂O₇.     

Microstructure and some magnetic properties of bulk amorphous (Fe0.61Co0.10Zr0.025Hf0.025Ti0.02W0.02B0.20)100−xYx (x=0, 2, 3 or 4) alloys

Microstructure, revealed by X-ray diffraction, transmission electron microscopy and Mössbauer spectroscopy, and magnetic properties such as magnetic susceptibility, its disaccommodation, core losses and approach to magnetic saturation in bulk amorphous (Fe_0.61Co_0.10Zr_0.025Hf_0.025Ti_0.02W_0.02B_0.20)_100−xY_x (x=0, 2, 3 or 4) alloys in the as-cast state and after the annealing in vacuum at 720 K for 15 min. are studied. The investigated alloys are ferromagnetic at room temperature. The average hyperfine field induction decreases with Y concentration. Due to annealing out of free volumes its value increases after the heat treatment of the samples. The magnetic susceptibility and core losses point out that the best thermal stability by the amorphous (Fe_0.61Co_0.10Zr_0.025Hf_0.025Ti_0.02W_0.02B_0.20)₉₇Y₃ alloy is exhibited. Moreover, from Mössbauer spectroscopy investigations it is shown that the mentioned above alloy is the most homogeneous. The atom packing density increases with Y concentration, which is proved by the magnetic susceptibility disaccommodation and approach to magnetic saturation studies.     

Structure, transport and magnetic properties in La2xSr2−2xCo2xRu2−2xO6

The perovskite solid solutions of the type La_2xSr_2−2xCo_2xRu_2−2xO₆ with 0.25≤x≤0.75 have been investigated for their structural, magnetic and transport properties. All the compounds crystallize in double perovskite structure. The magnetization measurements indicate a complex magnetic ground state with strong competition between ferromagnetic and antiferromagnetic interactions. Resistivity of the compounds is in confirmation with hopping conduction behaviour though differences are noted especially for x=0.4 and 0.6. Most importantly, low field (50 Oe) magnetization measurements display negative magnetization during the zero field cooled cycle. X-ray photoelectron spectroscopy measurements indicate the presence of Co²⁺/Co³⁺ and Ru⁴⁺/Ru⁵⁺ redox couples in all compositions except x=0.5. Presence of magnetic ions like Ru⁴⁺ and Co³⁺ gives rise to additional ferromagnetic (Ru-rich) and antiferromagnetic sublattices and also explains the observed negative magnetization.     

On the role of lattice distortion in the catalytic properties of substituted orthovanadates La1−xFexVO4

A series of mixed orthovanadates with nominal compositions La_1−xFe_xVO₄ were synthesized and characterized using powder X-ray diffraction, Mössbauer spectroscopy and temperature-programmed reduction techniques. The substitution resulted in the co-presence of two distinct mixed metal compositions having either monoclinic LaVO₄ or a triclinic FeVO₄ structure. Both these constituent phases were however, found to be of distorted nature, with no measurable change in respective crystal symmetry. Furthermore, the extent of this distortion depended upon the value of x and is attributed to the partial substitutions at A-site, i.e. with a part of La by Fe in LaVO₄ lattice and a part of Fe by La in the FeVO₄ phase. The substitution-induced lattice distortion is found to result in the lowering of the reduction temperature in case of both the above mentioned phases, and also in the synergistic enhancement in catalytic activity for a model CO oxidation reaction.     

Magnetic entropy change in GdCo13−xSix intermetallic compounds

The magnetic entropy change in GdCo_13−xSi_x (x=3.8, 4, 4.1, and 4.2) intermetallic compounds has been investigated by means of magnetic measurements in the vicinity of their Curie temperature. It was found that the magnetic ordering temperatures decrease from 60 K at x=3.8 to 28 K for x=4.2. The magnetic entropy change is calculated from isothermal magnetization versus magnetic field at various temperatures using the Maxwell relation. As a result, the maximum magnetic entropy changes of the investigated compounds, at their Curie temperatures, decrease from 11.5 J/kg K for x=4.2 to 6.86 J/kg K for x=3.8 in a field change of 0-3 T, whereas it decreases from 5.13 J/kg K for x=4.2 to 2.60 J/kg K for x=3.8 in a field change of 0-1 T. Moreover, the maximum value of the magnetic entropy change obtained at a higher field for GdCo_13−xSi_x with x=4 (23.75 J/kg K at 5 T) is comparable to that of various types of compounds with a cubic NaZn₁₃-type structure. Finally, the maximum of the magnetic entropy change is found to decrease with increasing Si content.