Complex permittivity, permeability and microwave absorbing properties of (Mn2−xZnx)U-type hexaferrite

Complex permittivity, permeability and microwave absorbing properties of a U-type hexaferrite series Ba₄Mn_(2−x)Zn_xFe₃₆O₆₀ (with 0≤x≤2 in step of 0.5) have been examined in the X-band (8.2-12.4 GHz) frequency range. The series have been prepared using conventional solid state reaction route. Microstructural variations with composition have been found with X-ray diffraction (XRD) and scanning electron microgram (SEM). The complex permittivity (ε^?=ε′−jε″) and permeability (μ^?=μ′−jμ″) were measured using vector network analyzer (Agilient Make model PNA E8364B). These parameters were then used for calculating the reflection loss for determination of microwave absorbing properties. Addition of Zn resulted in an increase in reflection loss from −4 dB (or 60 % absorption) in sample with x= 0 to −32 dB (99.92% absorption) in sample with x=1 when the sample thickness was 1.7 mm. Multiple peaks of resonance were obtained in the dielectric and magnetic loss spectra for all samples with x>0. The result indicates that the sample with composition Ba₄MnZnFe₃₆O₆₀, i.e., x=1, can be used effectively for microwave absorption and suppression of electromagnetic interference.     

Complex permittivity and complex permeability of Sr ions substituted Ba ferrite at X-band

M-type hexagonal ferrite composition, Ba_(1−x)Sr_xFe₁₂O₁₉ (x=0.0, 0.2, 0.4, 0.6, 0.8 and 1.0), was prepared by a two route ceramic method. Complex permittivity (ε′−jε″) and complex permeability (μ′−jμ″) have been measured using a network analyzer from 8.2 to 12.4 GHz X-ray diffraction confirmed the M-type hexagonal structure and a scanned electron micrograph was used to analyze the grain size distribution of ferrite. Substitution of Sr²⁺ ions causes an increase in porosity that deteriorates the electromagnetic and microstructural properties in the doped samples. Both dielectric constant and dielectric loss are enhanced in comparison to the permeability and magnetic loss over the entire frequency region. This is due to a resistivity variation and the formation of Fe²⁺ ions, which increases the hopping mechanism between Fe²⁺ and Fe³⁺ ions.     

Complex permittivity,complex permeability and microwave absorption properties of ferrite–polymer composites

The complex permittivity (ε′–jε″), complex permeability (μ′–jμ″) and microwave absorption properties of ferrite–polymer composites prepared with different ferrite ratios of 50%, 60%, 70% and 80% in polyurethane (PU) matrix have been investigated in X-band (8.2–12.4 GHz) frequency range. The M-type hexaferrite composition BaCo⁺²_0.9Fe⁺²_0.05Si⁺⁴_0.95Fe⁺³_10.1O₁₉ was prepared by solid-state reaction technique, whereas commercial PU was used to prepare the composites. At higher GHz frequencies, ferrite's permeabilities are drastically reduced, however, the forced conversion of Fe⁺³ to Fe⁺² ions that involves electron hopping, could have increased the dielectric losses in the chosen composition. We have measured complex permittivity and permeability using a vector network analyzer (HP/Agilent model PNA E8364B) and software module 85071. All the parameters ε′, ε″, μ′ and μ″ are found to increase with increased ferrite contents. Measured values of these parameters were used to determine the reflection loss at various sample thicknesses, based on a model of a single-layered plane wave absorber backed by a perfect conductor. The composite with 80% ferrite content has shown a minimum reflection loss of −24.5 dB (>99% power absorption) at 12 GHz with the −20 dB bandwidth over the extended frequency range of 11–13 GHz for an absorber thickness of 1.6 mm. The prepared composites can fruitfully be utilized for suppression of electromagnetic interference (EMI) and reduction of radar signatures (stealth technology).     

Enhanced microwave magnetic and attenuation properties of composites with free-standing spinel ferrite thick films as fillers

Free-standing thick films of spinel ferrite, Ni_0.89−xCu_0.11Zn_xFe₂O₄ with x=0.55 and 0.60, were prepared as fillers to fabricate electromagnetic composites. Compared to those made with conventional spherical fillers, the composites made with thick film fillers showed enhanced static permeability (μ′₀) and maximum imaginary permeability (μ″_max). At the same time, complex permittivity (ε′ and ε″) were almost unchanged. A relative bandwidth W_R of 7–8 was achieved, which is about 75% of the theoretical maximum relative bandwidth. These composites are potential candidates as electromagnetic attenuation materials with ultrabroad absorption bandwidth in L and S bands.     

Pr-substituted W-type barium ferrite: Preparation and electromagnetic properties

The W-type ferrites doped with Pr³⁺, BaCoNiPr_xFe_16−xO₂₇ (x=0-0.20), were prepared by a sol-gel method. The structure and electromagnetic properties of the samples are studied using powder X-ray diffraction, field emission scanning electron microscope, vibrating sample magnetometer and vector network analyzer. All the samples are hexagonal platelet-like W-type barium ferrite. These synthesized samples exhibit paramagnetism and strong magnetism. The saturation magnetization (Ms) increases with the increase of Pr³⁺ content. The real part of complex permittivity (ε′) decreases and the imaginary part (ε″) increases with Fe³⁺ replaced by Pr³⁺. The imaginary part of complex permittivity (μ″) increases and the real part (μ′) decreases after Pr³⁺ is doped. Furthermore, the doped Pr³⁺ improves the microwave absorbency.     

Magnetic and electromagnetic properties of composites of iron oxide and Co-B alloy prepared by chemical reduction

Magnetic and electromagnetic properties were investigated on the composites of iron oxide and Co-B alloy, which were prepared by a modified chemical reduction method. The composites are characterized by scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDXA), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and vibrating sample magnetometry (VSM). The complex electromagnetic parameters (permittivity ε_r=ε_r′+jε_r″ and permeability μ_r=μ_r′+jμ_r″) of paraffin mixed composite samples (paraffin:composites=1:1 in mass ratio) were measured in the frequency range 2-18 GHz by vector network analyzer. The measured real part (ε_r′) and imaginary part (ε_r″) of the relative permittivity show two resonant peaks in the range of 2-18 GHz. The imaginary parts of relative permeability (μ_r″) of all samples exhibited one broad resonant peak over the 2-8 GHz range. The μ_r″ of samples with higher molar ratio of Co to Fe (C and D) shows negative values within 13-18 GHz, which exhibit resonant and antiresonant permeabilities simultaneously. Calculation results indicated that the reflection loss values of the composites and paraffin wax mixtures are less than −10 dB with frequency width of about 6 GHz at the matching thickness.     

Influence of mobile space charges on electrical properties of ferroelectric Bi3.5La0.5Ti3O12 thin films

Lanthanum-substituted bismuth titanate, Bi_3.5La_0.5Ti₃O₁₂ (i.e., x=0.5 in Bi_4−xLa_xTi₃O₁₂), thin films have been grown on Pt/Ti/SiO₂/Si substrates using pulsed laser deposition. The frequency dependence of the real part ε′(ω) and the imaginary part ε″(ω) of the dielectric constant has been studied. The ε′(ω) does not show any sudden change within the frequency range of 10²-10⁶ Hz. In contrast, the ε″(ω) shows a large dispersion as frequency decreases. The observed relaxation behavior in ε″(ω) can be explained in terms of a migration of oxygen vacancies in (Bi₂O₂)²⁺ layers, not in Bi₂Ti₃O₁₀ perovskite layers.     

A novel high-k ‘Y5V’ barium titanate ceramics co-doped with lanthanum and cerium

Structural, dielectric, and ferroelectric properties of a novel high-k ‘Y5V’ (Ba_1−xLa_x)(Ti_1−x/4−yCe_y)O₃ ceramics (where x=0.03 and y=0.05, denoted by BL3TC5) with the highest ‘Y5V’ dielectric response (ε′>10 000) among rare-earth-doped BaTiO₃ ceramics to date are investigated in detail using SEM, TEM, XRD, DSC, EPR, Raman spectroscopy (RS), temperature and frequency, electric field dependences of dielectric permittivity (ε′), and temperature and electric field dependences of ferroelectric hysteresis loops. The BL3TC5 diffusion of ferroelectric phase transition occurs around dielectric peak temperatures (T_m) near a room temperature characteristic of dielectric thermal relaxation. Powder XRD data and defect complex model were given. “Relaxor” behavior associated with an order/disorder model and formation of a solid solution were discussed. The EPR results provided the evidence of Ti vacancies as compensating for lattice defects. High-k relaxor nature of BL3TC5 is characterized by an average cubic structure with long-range lattice disordering and local polar ordering; a slow change of the ε′ (T) and P_r(T) curves around T_m; no phase transition observed by DSC; and a broad, red-shifted A₁ (TO₂) Raman phonon mode at 251 cm⁻¹ accompanying the disappearance of the “silent” mode at 305 cm⁻¹ and a clear anti-resonance effect at 126 cm⁻¹ at room temperature.     

Permeability and electric resistivity of spin-sprayed Zn ferrite films for high-frequency device applications

By spin-spray ferrite plating, an aqueous process, we prepared Zn_xFe_3−xO₄ (0?x?0.97) films at 90 °C on polyimide and glass substrates, on which complex permeability (μ=μ′–jμ″) was measured. As Zn content x increases from 0 to 0.70 static permeability, μ_s, increases from 14 to 119, but natural resonance frequency, f_r, reduces from 1 GHz to 200 MHz. This is because magnetic anisotropy field decreases more rapidly than saturation magnetization. With increasing x DC electric resistivity, ρ, increases, exceeding 50 Ω cm (a measure of the lower limit for the high-frequency application) when x>0.15. Film with x=0.70 has relatively high μ′≈119 and μ″=0 up to 20 MHz, and is promising to be used as MHz core inductors. Film with x=0.36 has relatively high μ′=80 and μ″=0 up to 100 MHz, and it may be used as inductors at the ten MHz range and noise suppression sheets at the hundred MHz range.     

Effect of sintering temperature on the structural, dielectric and ferroelectric properties of tungsten substituted SBT ceramics

Structural, dielectric and ferroelectric properties of tungsten (W) substituted SrBi₂(Ta_1−xW_x)₂O₉ (SBTW) [x=0.0, 0.025, 0.05, 0.075, 0.1 and 0.2] have been studied as a function of sintering temperature (1100-1250 °C). X-ray diffraction patterns confirm the single-phase layered perovskite structure formation up to x=0.05 at all sintering temperatures. The present study reveals an optimum sintering temperature of 1200 °C for the best properties of SBTW samples. Maximum T_c of ∼390 °C is observed for x=0.20 sample sintered at 1200 °C. Peak-dielectric constant (ε_r) increases from ∼270 to ∼700 on increasing x from 0.0 to 0.20 at 1200 °C sintering temperature. DC conductivity of the SBTW samples is nearly two to three orders lower than that of the pristine sample. Remnant polarization (P_r) increases with the W content up to x≤0.075. A maximum 2P_r (∼25 μC/cm²) is obtained with x=0.075 sample sintered at 1200 °C. The observed behavior is explained in terms of improved microstructural features, contribution from the oxygen and cationic vacancies in SBTW. Such tungsten substituted samples sintered at 1200 °C exhibiting enhanced dielectric and ferroelectric properties should be useful for memory applications.     

Magnetic spectra of Fe-based nanocrystalline wires with axial or transverse domains

The circular permeability μ′=μ′−jμ″ of two Fe-based soft magnetic wires with axial and transverse domains, has been determined from the measurements of impedance Z=R+jX as functions of frequency (f=10-10⁵ Hz) and AC current amplitude (I=0.1-100 mA). From the magnetic spectra of μ′−f and μ″−f for a few circular fields (H_φ=0.4, 1.2, 4, 12, 40 A/m), we found that the sample with axial domain structure exhibits a relaxational feature, while for the one with transverse domain resonance-like spectra were observed when the circular field H_φ≥4 A/m. These results have been discussed in terms of domain structure and circular magnetization processes.     

Magnetic and Microwave Absorbing Properties of Electrospun Ba(1−x)LaxFe12O19 Nanofibers

Ba_(1−x)La_xFe₁₂O₁₉ (0.00≤x≤0.10) nanofibers were fabricated via the electrospinning technique followed by heat treatment at different temperatures for 2 h. Various characterization methods including scanning electron microscopy (SEM), X-ray diffraction (XRD), vibrating sample magnetometer (VSM), and microwave vector network analyzer were employed to investigate the morphologies, crystalline phases, magnetic properties, and complex electromagnetic parameters of nanofibers. The SEM images indicate that samples with various values of x are of a continuous fiber-like morphology with an average diameter of 110±20 nm. The XRD patterns show that the main phase is M-type barium hexaferrite without other impurity phases when calcined at 1100 °C. The VSM results show that coercive force (H_c) decreases first and then increases, while saturation magnetization (M_s) reveals an increase at first and then decreases with La³⁺ ions content increase. Both the magnetic and dielectric losses are significantly enhanced by partial substitution of La³⁺ for Ba²⁺ in the M-type barium hexaferrites. The microwave absorption performance of Ba_0.95La_0.05Fe₁₂O₁₉ nanofibers gets significant improvement: The bandwidth below −10 dB expands from 0 GHz to 12.6 GHz, and the peak value of reflection loss decreases from −9.65 dB to −23.02 dB with the layer thickness of 2.0 mm.     

Giant magnetoimpedance and permeability change in La2/3Sr1/3MnO3 manganite under low fields

We demonstrated that La_2/3Sr_1/3MnO₃ sintered manganite could exhibit a magnetoreactance ΔX/X₀ of −25.5% at 100 kHz, a giant magnetoimpedance ΔZ/Z₀ of −20% at 1-2 MHz and a giant AC magnetoresistance ΔR/R₀ of −39.3% at 5 MHz under a very low field of 300 Oe at room temperature, whereas the DC magnetoresistance Δρ/ρ₀ was −3.95% under H=10 kOe and only about −0.18% under H=300 Oe. Large field-induced change of real and imaginary circular permeabilities (Δμ′_?/μ′_?(0) and Δμ″_?/μ″_?(0)) were obtained for La_2/3Sr_1/3MnO₃ sintered manganite. The giant magnetoreactance (giant magneto-inductive effect) at very low frequencies originates from the field induced change of transverse permeability. At 100 kHz under H=300 Oe, La_2/3Sr_1/3MnO₃ sintered manganite has Δμ′_?/μ′_?(0)=−25.8% and Δμ″_?/μ″_?(0)=−10.9%. The values of ΔR/R₀ and ΔZ/Z₀ are very small under 300 Oe at 100 kHz. The giant magnetoimpedance at high frequencies mainly originates from the large transverse permeability change induced by DC magnetic fields, via the penetration depth. Under H=300 Oe, La_2/3Sr_1/3MnO₃ sintered manganite presents values of Δμ′_?/μ′_?(0)=−24.9%, Δμ″_?/μ″_?(0)=−49.8% at 1 MHz, and Δμ′_?/μ′_?(0)=−21.2%, Δμ″_?/μ″_?(0)=−58.2% at 5 MHz.     

Electromagnetic and microwave absorbing properties of Co2Z-type hexaferrites doped with La

Z-type ferrites doped with La³⁺, Ba_3−xLa_xCo₂Fe₂₄O₄₁ (x=0.00-0.30), were prepared by sol-gel method. The effect of the substitution La³⁺ rare-earth ions for Ba²⁺ ions on the microstructure, complex permeability, permittivity and microwave absorption of the samples was investigated. The results show that the major phase of the ferrites changed to Z-phase when sintering temperature was 1250 °C for 5 h. With the increase of the substitution ratio of La³⁺ ions from 0.0 to 0.3, the lattice parameters a and c increased gradually, which resulted in the change of the particle shape and size. The data of magnetism showed that the addition of La³⁺ ions make the ferrite a better soft magnetic material due to increase of magnetization (σ_s) and decrease of coercivity (H_c). The La³⁺ ions doped in the ferrite not only improved complex permeability and complex permittivity, but also microwave absorbency.     

Effect of Fe substitution on magnetocaloric effect in La0.7Sr0.3Mn1−xFexO3 (0.05≤x≤0.20)

We have studied the effect of Fe substitution on magnetic and magnetocaloric properties in La_0.7Sr_0.3Mn_1−xFe_xO₃ (x=0.05, 0.07, 0.10, 0.15, and 0.20) over a wide temperature range (T=10-400 K). It is shown that substitution by Fe gradually decreases the ferromagnetic Curie temperature (T_C) and saturation magnetization up to x=0.15 but a dramatic change occurs for x=0.2. The x=0.2 sample can be considered as a phase separated compound in which both short-range ordered ferromagnetic and antiferromagnetic phases coexist. The magnetic entropy change (−ΔS_m) was estimated from isothermal magnetization curves and it decreases with increase of Fe content from 4.4 J kg⁻¹ K⁻¹ at 343 K (x=0.05) to 1.3 J kg⁻¹ K⁻¹ at 105 K (x=0.2), under ΔH=5 T. The La_0.7Sr_0.3Mn_0.93Fe_0.07O₃ sample shows negligible hysteresis loss, operating temperature range over 60 K around room temperature with refrigerant capacity of 225 J kg⁻¹, and magnetic entropy of 4 J kg⁻¹ K⁻¹ which will be an interesting compound for application in room temperature refrigeration.     

A variable temperature EPR study of the manganites (La1/3Sm2/3)2/3SrxBa0.33−xMnO3 (x=0.0, 0.1, 0.2, 0.33): Small polaron hopping conductivity and Griffiths phase

Four manganite samples of the series, (La_1/3Sm_2/3)_2/3Sr_xBa_0.33−xMnO₃, with x=0.0, 0.1, 0.2 and 0.33, were investigated by X-band (∼9.5 GHz) electron paramagnetic resonance (EPR) in the temperature range 4-300 K. The temperature dependences of EPR lines and linewidths of the samples with x=0.0, 0.1 and 0.2, containing Ba²⁺ ions, exhibit similar behavior, all characterized by the transition temperatures (T_C) to ferromagnetic states in the 110-150 K range. However, the sample with x=0.33 (containing no Ba²⁺ ions) is characterized by a much higher T_C=205 K. This is due to significant structural changes effected by the substitution of Ba²⁺ ions by Sr²⁺ ions. There is an evidence of exchange narrowing of EPR lines near T_min, where the linewidth exhibits the minimum. Further, a correlation between the temperature dependence of the EPR linewidth and conductivity is observed in all samples, ascribed to the influence of small-polaron hopping conductivity in the paramagnetic state. The peak-to-peak EPR linewidth was fitted to ΔB_pp(T)=ΔB_pp,min+A/Texp(−E_a/k_BT), with E_a=0.09 eV for x=0.0, 0.1 and 0.2 and E_a=0.25 eV for x=0.33. From the published resistivity data, fitted here to σ(T)∝1/T exp(−E_σ/k_BT), the value of E_σ, the activation energy, was found to be E_σ=0.18 eV for samples with x=0.0, 0.1 and 0.2 and E_σ=0.25 eV for the sample with x=0.33. The differences in the values of E_a and E_σ in the samples with x= 0.0, 0.1and 0.2 and x=0.33 has been ascribed to the differences in the flip-flop and spin-hopping rates. The presence of Griffiths phase for the samples with x=0.1 and 0.2 is indicated; it is characterized by coexistence of ferromagnetic nanostructures (ferrons) and paramagnetic phase, attributed to electronic phase separation.     

Transport behavior and mechanism of conduction of simultaneously substituted Y and Fe in La0.7Ba0.3MnO3 perovskite

The electrical properties and the mechanism of conduction of the simultaneously substituted La_0.7−xY_xBa_0.3Mn_1−xFe_xO₃ perovskite (0≤x≤0.30) have been studied. The insertion of Y³⁺ and Fe³⁺ ions in the parent compound La_0.7Ba_0.3MnO₃ leads to an increase of the resistivity. The undoped sample (x=0) shows a metallic behavior, which can be fitted by the relation ρ(T)=ρ₀+ρ₂T²+ρ_4.5T^4.5, indicating the importance of electron-magnon scattering effects in this material. All the other samples (x≥0.10) are semiconductors throughout the studied temperature range (80-290 K). Several models have been used to fit their temperature-dependent resistivity: thermal activation, adiabatic nearest-neighbor hopping of small polarons (Holstein theory) and variable range hopping (VRH) models. The fits show that the electronic transport in semiconducting La_0.7−xY_xBa_0.3Mn_1−xFe_xO₃ is well described and dominated by the VRH mechanism, for which the hopping distance (a) grows with increasing Fe³⁺ doping, thus increasing the average hopping energy W.     

Magnetic and microwave absorbing properties of magnetite-thermoplastic natural rubber nanocomposites

Magnetic and microwave absorbing properties of thermoplastic natural rubber (TPNR) filled magnetite (Fe₃O₄) nanocomposites were investigated. The TPNR matrix was prepared from polypropylene (PP), natural rubber (NR) and liquid natural rubber (LNR) in the ratio of 70:20:10 with the LNR as the compatibilizer. TPNR-Fe₃O₄ nanocomposites with 4-12 wt% Fe₃O₄ as filler were prepared via a Thermo Haake internal mixer using a melt-blending method. XRD reveals the presence of cubic spinel structure of Fe₃O₄ with the lattice parameter of a=8.395 Å. TEM micrograph shows that the Fe₃O₄ nanoparticles are almost spherical with the size ranging 20-50 nm. The values of saturation magnetization (M_S), remanence (M_R), initial magnetic susceptibility (χ_i) and initial permeability (μ_i) increase, while the coercivity (H_C) decreases with increasing filler content for all compositions. For nanocomposites, the values of the real (ε_r′) and imaginary permittivity (ε_r′′) and imaginary permeability (μ_r′′) increase, while the value of real permeability (μ_r′) decreases as the filler content increases. The absorption or minimum reflection loss (R_L) continuously increases and the dip shifts to a lower frequency region with the increasing of both filler content in nanocomposites and the sample thickness. The R_L is −25.51 dB at 12.65 GHz and the absorbing bandwidth in which the R_L is less than −10 dB is 2.7 GHz when the filler content is 12 wt% at 9 mm sample thickness.     

Optical and magneto-optical properties of room-temperature ferromagnetic In(Ga)MnAs layers, deposited by pulse laser ablation

Spectral dependences of refractive and absorption indices n(hν), k(hν) (hν=1.2-4.4 eV) and the transversal Kerr effect δ(hν) (hν=0.5-4.4 eV) in In(Ga)MnAs layers fabricated by laser deposition have been investigated. Spectra of the diagonal and off-diagonal components of the dielectric permittivity tensor of these layers have been calculated. Comparison of the spectral dependences δ(hν), ε′(hν) and ε′₂×(hν)² of the In(Ga)MnAs layers with similar spectra for MnAs has been carried out. Particular features in the spectra of the In(Ga)MnAs layers have been explained by a competition of contributions of the In_1−x(Ga_1−x)Mn_xAs host and MnAs inclusions.     

Magnetic and dielectric properties of alkaline earth Ca and Ba ions co-doped BiFeO3 nanoparticles

Ca²⁺ and Ba²⁺ ions co-doped BiFeO₃ nanoparticles, Bi_0.8Ca_0.2−xBa_xFeO₃ (x=0-0.20), were prepared by a sol-gel method. The phase structure, grain size, dielectric and magnetic properties of the prepared samples were investigated. The results showed that the lattice structure of the nanoparticles transformed from rhombohedral (x=0) to orthorhombic (x=0.07-0.19) and then to tetragonal (x=0.20) with x increased. The dielectric properties of the nanoparticles were affected by the properties of the substitutional ions as well as the crystalline structure of the samples. The magnetic properties of the nanoparticles were greatly improved and the T_N of the nanoparticles was obviously increased. All the Ca²⁺ and Ba²⁺ ions co-doped BiFeO₃ nanoparticles presented the high ratio of M_r/M from 0.527 to 0.571 and large coercivity from 4.335 to 5.163 KOe.