Solid-state synthesis and magnetic properties of epitaxial FePd3(0 0 1) films

The solid-state synthesis of magnetically soft phase FePd₃ in epitaxial Pd(0 0 1)/Fe(0 0 1)/MgO(0 0 1) film systems was studied experimentally. The system had a Fe to Pd ratio of 1:3. An increase to 450 °C leads to the formation of three variants of ordered L1₀-FePd crystallites. At 500 °C, the solid-state reaction of unreacted Pd with L1₀-FePd crystallites initiates the growth of an ordered epitaxial L1₂-FePd₃(0 0 1) layer. When annealing at 650 °С, a gradual disordering is observed. The magnetic anisotropy (K₁=−2.0×10³ erg/cm³) and the saturation magnetization (M_S=650 emu/cm³) of the disordered FePd₃ phase were determined.     

Four-fold magnetic anisotropy in a Co film on MgO(0 0 1)

The development of devices based on magnetic tunnel junctions has raised new interests on the structural and magnetic properties of the interface Co/MgO. In this context, we have grown ultrathin Co films (≤30 Å) by molecular-beam epitaxy on MgO(0 0 1) substrates kept at different temperatures (T_S). Their structural and magnetic properties were correlated and discussed in the context of distinct magnetic anisotropies for Co phases reported in the literature. The sample characterization has been done by reflection high energy electron diffraction, magneto-optical Kerr effect and ferromagnetic resonance. The main focus of the work is on a sample deposited at T_S=25 °C, as its particular way of growth has enabled a bct Co structure to settle on the substrate, where it is not normally obtained without specific seed layers. This sample presented the best crystallinity, softer magnetic properties and a four-fold in-plane magnetic anisotropy with Co〈1 1 0〉 easy directions. Concerning the samples prepared at T_S=200 and 500° C, they show fcc and polycrystalline structures, respectively and more intricate magnetic anisotropy patterns.     

Spin-pumping-enhanced magnetic damping in ultrathin Cu(0 0 1)/Co/Cu and Cu(0 0 1)/Ni/Cu films

The influence of the Cu capping layer thickness on the spin pumping effect in ultrathin epitaxial Co and Ni films on Cu(0 0 1) was investigated by in situ ultrahigh vacuum ferromagnetic resonance. A pronounced increase in the linewidth is observed at the onset of spin pumping for capping layer thicknesses d_Cu larger than 5 ML, saturating at d_Cu = 20 ML for both systems. The spin mixing conductance for Co/Cu and Ni/Cu interfaces was evaluated.     

Low-frequency noise and inelastic tunneling spectroscopy in Fe(1 1 0)/MgO(1 1 1)/Fe(1 1 0) epitaxial magnetic tunnel junctions

We report on tunnelling magnetoresistance (TMR), current–voltage (IV) characteristics and low-frequency noise in epitaxially grown Fe(1 1 0)/MgO(1 1 1)/Fe(1 1 0) magnetic tunnel junctions (MTJs) with dimensions from 2×2 to 20×20 μm². The evaluated MgO energy barrier (0.50±0.08 eV), the barrier width (13.1±0.5 Å) as well as the resistance times area product (7±1 MΩ μm²) show relatively small variation, confirming a high quality epitaxy and uniformity of all MTJs studied. At low temperatures (T<10 K) inelastic electron tunneling spectroscopy (IETS) shows anomalies related to phonons (symmetric structures below 100 meV) and asymmetric features above 200 meV. We explain the asymmetric features in IETS as due to generation of electron standing waves in one of the Fe electrodes. The noise power, though exhibiting a large variation, was observed to be roughly anti-correlated with the TMR. Surprisingly, for the largest junctions we observed a strong enhancement of the normalized low-frequency noise in the antiparallel magnetic configuration. This behavior could be related to the influence of magnetostriction on the characteristics of the insulating barrier through changes in local barrier defects structure.     

Magnetic anisotropy and electronic structure of iron films on W(1 1 0) by spin-polarized two-electron spectroscopy

Low-energy spin-polarized two-electron spectroscopy was applied to study the spin-dependent electronic structure of 3 ML and 50 ML epitaxial iron films grown on single crystal W(1 1 0). Such films are known to show an in-plane rotation of the easy magnetization axis between thicknesses [M. Donath, Journal of Physics: Condensed Matter 11 (48) (1999) 9421; D. Sander, Journal of Physics: Condensed Matter (20) (2004) R603, O. Fruchart, J.P. Nozieres, D. Givord, Journal of Magnetism and Magnetic Materials 207 (1999) 158, H.J. Elmers, U. Gradmann, Applied Physics A: Materials Science & Processing 51 (3) (1990) 255]. Momentum distributions of correlated electron pairs I(k₁, k₂) excited from the films by 25 eV primary electrons were measured for two opposite polarizations of the incident beam. Energy and momentum conservation laws in the electron scattering events allow the extraction of information on the spin-dependent Bloch spectral density function of the valence electrons in iron films. The observed difference in the electronic structure of these two films is most likely due to the different crystal structures of the films.     

First principles studies of Fe/Co superlattices and multilayers with bcc (0 0 1) and (1 1 0) orientations

The layer resolved magnetic moments and magnetic anisotropy energy of Fe/Co superlattices and multilayers with bcc (0 0 1) and (1 1 0) orientations obtained from first principles simulations are reported here. The magnetic moment of Fe atoms are found to depend on the geometry, coordination number and proximity to Co atoms, whereas that of Co remains almost constant in the superlattices and multilayers. Mixing of atoms at the interface resulted in enhanced Fe magnetic moment while that of Co is unaffected. The magnetic anisotropy energy in superlattices and multilayers are found to be larger than the corresponding values of bulk counterparts. Calculated easy axis of magnetization is in the plane for all superlattice compositions considered in the study, while that in multilayers, changes with crystalline orientation and thickness of Co layers.     

Growth and morphology of the epitaxial Fe(1 1 0)/MgO(1 1 1)/Fe(1 1 0) Trilayers

Growth and surface morphology of epitaxial Fe(1 1 0)/MgO(1 1 1)/Fe(1 1 0) trilayers constituting a magnetic tunnel junction were investigated by low-energy electron diffraction (LEED) and scanning tunneling microscopy (STM). STM reveals a grain-like growth mode of MgO on Fe(1 1 0) resulting in dense MgO(1 1 1) films at room temperature as well as at 250 °C. As observed by STM, initial deposition of MgO leads to a partial oxidation of the Fe(1 1 0) surface which is confirmed by Auger electron spectroscopy. The top Fe layer deposited on MgO(1 1 1) at room temperature is relatively rough consisting of clusters which can be transformed by annealing to an atomically flat epitaxial Fe(1 1 0) film.     

para-Sexiphenyl thin film growth on Cu(1 1 0) and Cu(1 1 0)-(2 × 1)O surfaces

We present a reflectance difference spectroscopy (RDS) study of para-sexiphenyl (p-6P) thin film growth on Cu(1 1 0) and Cu(1 1 0)-(2 × 1)O substrates. The RDS spectra show pronounced anisotropies for p-6P films formed on both substrates at room temperature, demonstrating that the molecules are uniaxially aligned within the films. Based on the RD spectra and the evolution of the optical transitions with p-6P coverage the growth mode on both substrates could be identified. From the dominating RDS feature, assigned to the lowest energy HOMO-LUMO transition, the orientation of the molecular chain can be determined. On Cu(1 1 0), the p-6P molecular chains align in the direction, i.e., along the Cu atomic rows, whereas on the Cu(1 1 0)-(2 × 1)O surface, the molecules are oriented in the orthogonal [0 0 1] direction, i.e., along the “added” Cu-O rows of the Cu(1 1 0)-(2 × 1)O surface. The energetic position and line shape of the main RDS feature differs for the two substrates and varies with p-6P coverage. This fine structure is discussed in terms of different molecular conformations, adlayer structure and vibronic replicas.     

Uniaxial magnetic anisotropy in epitaxial α‐Fe() films

The magnetic anisotropy of epitaxial, high‐index Fe() films is investigated. The strength of the in‐plane uniaxial magnetic anisotropy increases monotonically with the inclination angle φ between Fe(001) and Fe(). This increase is demonstrated to be caused by the cubic magnetocrystalline anisotropy and not by surface‐ or interface‐related effects.     

Electrical conductance at initial stage in epitaxial growth of Pb on modified Si(1 1 1) surface

The electrical conductance and RHEED intensities as a function of the coverage have been measured during Pb depositions at 105 K on Si(1 1 1)-(6 × 6)Au with up to 4.2 ML of annealed Pb. The experiments show the strong influence of used substrates on the behavior of the conductance during the epitaxy of Pb atoms, especially for very initial stage of growth. Oscillations of the conductance during the layer-by-layer growth are correlated with RHEED intensity oscillations. The analysis of the conductance behavior is made according to the theory described by Trivedi and Aschcroft [N. Trivedi, N. Aschcroft, Phys. Rev. B 38 (1988) 12298].     

The epitaxial sexiphenyl (0 0 1) monolayer on TiO2(1 1 0): A grazing incidence X-ray diffraction study

A para-sexiphenyl monolayer of near up-right standing molecules (nominal thickness of 30 Å) is investigated in-situ by X-ray diffraction using synchrotron radiation and ex-situ by atomic force microscopy. A terrace like morphology is observed, the step height between the terraces is approximately one molecular length. The monolayer terraces, larger than 20 μm in size, are extended along the [0 0 1] direction of the TiO₂(1 1 0) substrate i.e. along the Ti-O rows of the reconstructed substrate surface. The structure of the monolayer and its epitaxial relationship to the substrate is determined by grazing incidence X-ray diffraction. Extremely sharp diffraction peaks reveal high crystalline order within the monolayer, which was found to have the bulk structure of sexiphenyl. The monolayer terraces are epitaxially oriented with the (0 0 1) plane parallel to the substrate surface (out-of-plane order). Four epitaxial relationships are observed. This in-plane alignment is determined by the arrangement of the terminal phenyl rings of the sexiphenyl molecules parallel to the oxygen rows of the substrate.     

Perpendicular magnetic anisotropy of V/Co(0 0 1)

Based on the full-potential linearized augmented plane wave (FLAPW) calculations, various magnetic properties of ultra thin face centered cubic (fcc) Co(0 0 1) film and V adsorbed systems on Co(0 0 1) surface are explored. It was found that the V film grown on fcc Co(0 0 1) surface has large induced magnetic moment and the direction of magnetization is antiparallel to that of Co atom in the submonolayer coverage. Very interestingly, we found that the surface alloy and 0.5 ML adsorbed V/Co(0 0 1) systems have perpendicular magnetocrystalline anisotropy and the magnitude of anisotropy energy in 0.5 ML V on fcc Co(0 0 1) surface is greatly larger than that of surface alloy, while we observed in-plane magnetization in pure fcc Co(0 0 1) film. It was found that the spin-orbit interaction through spin-flip process cannot be ignored, therefore the simple relation with orbital anisotropy is not applicable in the interpretation of magnetocrystalline anisotropy.     

Magnetization of epitaxial MnGe alloys on Ge(1 1 1) substrates

The structural and magnetic properties of an Mn rich solid phase epitaxy Mn_xGe_1−x alloy grown on a clean 2 × 8-Ge(1 1 1) surface, with a Curie temperature of about 300 K are investigated. Magneto-optical  Kerr effect infers the existence of in-plane easy magnetization direction. We describe the epitaxial registry condition, the room temperature—zero field magnetic structure observed by magnetic force microscopy and the magneto-optical properties. The observations are consistent with the formation of epitaxial Mn₅Ge₃ alloy, with a modulated magnetic structure characterized by asymmetric 180° Bloch walls consisting of a vortex-like configuration of the local magnetization.     

Combinatorial synthesis and characterization of a ternary epitaxial film of Co and Mn doped Ge (0 0 1)

We report combinatorial molecular beam epitaxy synthesis and properties of a ternary epitaxial film of Co and Mn co-doped Ge grown on Ge (0 0 1) substrate. Structural effects were examined in situ by reflection high-energy electron diffraction and ex situ by microbeam X-ray diffraction techniques, and magnetic properties were probed by using magnetooptic Kerr effect. Ternary epitaxial phase diagrams have been studied for total doping concentrations up to 30 at.%, where regions of coherent epitaxy and rough disordered growth and those of near room temperature ferromagnetic ordering have been identified.     

The growth and structure of titanium dioxide films on a Re(1 0 −1 0) surface: Rutile(0 1 1)-(2 × 1)

Titanium dioxide films were grown on Re(1 0 −1 0) by Ti vapor deposition in oxygen at T = 830 K and studied by means of low-energy electron diffraction (LEED), X-ray photoelectron spectroscopy (XPS), low-energy ion scattering (LEIS) and X-ray diffraction (XRD). The Ti oxide stoichiometry was determined by XPS as Ti:O = 1:2, with the Ti oxidation state (4+). The TiO₂ growth was monitored by means of LEED as a function of film thickness. Extending the coverage from the submonolayer into the multilayer regime gives rise to a p(2 × 2) pattern, a (poorly ordered) (1 × 1), and, finally, a stable (2 × 2) structure, the latter being associated with a homogeneous TiO₂ phase. For normal electron incidence, the (2 × 2) LEED pattern exhibits systematically extinguished beams at (n ± 1/2, 0) positions, indicating a glide mirror plane. The pg(2 × 2) structure could be explained by both a rutile(0 1 1)-(2 × 1) reconstructed surface and a bulk truncated brookite(0 0 1) surface. Faceting phenomena, i.e. running LEED spots, observed with thin TiO₂ films point to the formation of a rutile(0 1 1)-(2 × 1) surface with two domains and {0 1 1}-(2 × 1) facets and rule out the brookite alternative. Confirmation of this assignment was obtained by an XRD analysis performed at the Berlin synchrotron facility BESSY.     

Surface order dependent magnetic thin film growth: Fe on GaN(0 0 0 1)

X-ray photoemission spectroscopy and X-ray magnetic circular dichroism have been used to study the growth process, chemical composition and magnetic character of iron deposited on ordered and disordered GaN(0 0 0 1) surfaces. On the (1 × 1) ordered surface the Fe grows uniformly but with disruption to the substrate surface, subsequently nitrogen desorbs from the surface, some of which diffuses into the Fe overlayer. The film is magnetically fractured, with high magnetic coercivity and broad switching fields. Conversely, the gallium rich disordered surface protects the underlying substrate from any disruption and initially induces non-uniform growth, the Fe clusters coalesce at ∼12 Å, to produce a uniform film with desirable magnetic characteristics. Films beyond this point (>12 Å) indicate sharp hysteresis loops with low coercivities. For the resultant film (36 Å) we measure a magnetic moment of 2.02 μ_B, in agreement with bulk bcc iron (2.068 μ_B.)     

Tailoring exchange bias by oxidizing Co film across a Cu wedge in Cu(wedge)/CoO/Co/Cu(0 0 1)

A new method was developed to control Co film oxidation in an epitaxially grown Cu(wedge)/Co/Cu(0 0 1) film. By annealing the film at 200 °C within 10⁻⁶ Torr oxygen environment, we find that the top Cu wedge controls the Co underlayer oxidation continuously as a function of the Cu film thickness. Magneto-Optic Kerr Effect measurement shows that the exchange bias of the resulting CoO/Co film exhibits a systematic variation with the Cu thickness, thus offering a new method of tailoring the exchange bias of CoO/Co films.