Preparation, characterization, and optical properties of gold, silver, and gold-silver alloy nanoshells having silica cores

This report describes the structural and optical properties of a series of spherical shell/core nanoparticles in which the shell is comprised of a thin layer of gold, silver, or gold-silver alloy, and the core is comprised of a monodispersed silica nanoparticle. The silica core particles were prepared using the St?ber method, functionalized with terminal amine groups, and then seeded with small gold nanoparticles (approximately 2 nm in diameter). The gold-seeded silica particles were coated with a layer of gold, silver, or gold-silver alloy via solution-phase reduction of an appropriate metal ion or mixture of metal ions. The size, morphology, and elemental composition of the composite nanoparticles were characterized by field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, thermal gravimetric analysis (TGA), dynamic light scattering (DLS), and transmission electron microscopy (TEM). The optical properties of the nanoparticles were analyzed by UV-vis spectroscopy, which showed strong absorptions ranging from 400 nm into the near-IR region, where the position of the plasmon band reflected not only the thickness of the metal shell, but also the nature of the metal comprising the shell. Importantly, the results demonstrate a new strategy for tuning the position of the plasmon resonance without having to vary the core diameter or the shell thickness.     

乳液聚合法制备纳米金/聚苯乙烯复合粒子

以氯金酸为前驱体,十二烷基硫醇和硼氢化钠分别作为稳定剂和还原剂,采用相转移法制备了单分散的金纳米粒子.将金纳米粒子通过乳液聚合的方法制备了纳米金/聚苯乙烯复合粒子.通过紫外-可见吸收光谱(UV-Vis)研究了纳米金和纳米金/聚苯乙烯复合粒子的光吸收特性,使用傅立叶变换红外光谱(FT-IR)、X射线衍射(XRD)、透射电子显微镜(TEM)和动态光散射(DLS)对产物的组成、晶体结构、形貌、以及粒径进行了表征.结果表明,复合粒子为粒径分布较窄的球形,其中的金纳米粒子为面心立方结构.热失重分析(TGA)说明制备的纳米金/聚苯乙烯复合粒子具有很好的热稳定性.     

Preparation and properties of silica–gold core–shell particles

Silica-metal core–shell particles, as for instance those having siliceous core and nanostructured gold shell, attracted a lot of attention because of their unique properties resulting from combination of mechanical and thermal stability of silica and magnetic, electric, optical and catalytic properties of metal nanocrystals such as gold, silver, platinum and palladium. Often, the shell of the core–shell particles consists of a large number of metal nanoparticles deposited on the surface of relatively large silica particles, which is the case considered in this work. Namely, silica particles having size of about 600 nm were subjected to surface modification with 3-aminopropyltrimethoxysilane. This modification altered the surface properties of silica particles, which was demonstrated by low pressure nitrogen adsorption at ?196 °C. Next, gold nanoparticles were deposited on the surface of aminopropyl-modified silica particles using two strategies: (i) direct deposition of gold nanoparticles having size of about 10 nm, and (ii) formation of gold nanoparticles by adsorption of tetrachloroauric acid on aminopropyl groups followed by its reduction with formaldehyde.The overall morphology of silica–gold particles and the distribution of gold nanoparticles on the surface of modified silica colloids were characterized by scanning electron microscopy. It was shown that direct deposition of colloidal gold on the surface of large silica particles gives more regular distribution of gold nanopartciles than that obtained by reduction of tetrachloroauric acid. In the latter case the gold layer consists of larger nanoparticles (size of about 50 nm) and is less regular. Note that both deposition strategies afforded silica–gold particles having siliceous cores covered with shells consisting of gold nanoparticles of tunable concentration.     

Size control of nanostructured silica using chitosan template and fractal geometry: effect of chitosan/silica ratio and aging temperature

The uses of low cost, renewable, environmentally friendly chitosan biopolymer as the structural template to control the size of silica particles in the range of nanometer scales are attractive for their practical industrial applications. In this paper, the nanostructured silica was synthesized using sodium silicate as the silica source and chitosan as the template under mild conditions. Effects of chitosan/silica ratio and aging temperature on the formation and the control of nanostructured silica was investigated by using thermal gravimetric analysis (TGA), scanning electron microscopy (SEM), N₂-sorption measurement, and transmission electron microscopy (TEM). It was found that the silica products were composed of the aggregates of primary silica nanoparticles and nanostructured silica units. At low aging temperature, the size of nanostructured silica was decreased when increasing the chitosan/silica ratio from 0.1 to 0.4. In contrast, the reverse trend was observed at the chitosan/silica ratio of higher than 0.4. The increase of aging temperature led to the formation of larger primary silica nanoparticles and nanostructured silica, and also promoted the formation of silica/chitosan composites. The fractal dimension calculated using modified FHH method found the linear correlation at two different regimes which might reflect the aggregates of silica products at different length scales.     

Aerosol-assisted synthesis of mesoporous titania nanoparticles with high surface area and controllable phase composition

Mesoporous titania nanoparticles (denoted as MTN) with high surface area (e.g., 252 m² g⁻¹) were prepared using tetrapropyl orthotitanate (TPOT) as a titania precursor and 10–20 nm or 20–30 nm silica colloids as templates. Co-assembly of TPOT and silica colloids in an aerosol-assisted process and immediate calcination at 450 °C resulted in anatase/silica composite nanoparticles. Subsequent removal of the silica colloids from the composite by NaOH solution created mesopores in the TiO₂ nanoparticles with pore size corresponding to that of silica colloids. Effects of silica colloids’ contents on MTN porosity and crystallites’ growth at a higher calcination temperature (e.g., 1000 °C) were investigated. Silica colloids suppressed the growth of TiO₂ crystallites during calcination at a higher calcination temperature and controllable contents of the silica colloids in precursor solution resulted in various atomic ratios of anatase to rutile in the calcinated materials. The mesostructure and crystalline structure of these titania materials were characterized by transmission electron microscope (TEM), scanning electron microscope (SEM), X-ray diffraction (XRD), differential thermal analysis (DTA)-thermo-gravimetric analysis (TGA), and N₂ sorption.     

Laser-induced shape transformation of gold nanoparticles below the melting point: the effect of surface melting

Relatively large gold nanoparticles (mean diameter of major axis 38.2 nm, mean aspect ratio 1.29) in aqueous solution were found to undergo shape transformations from ellipsoids to spheres at ca. 940 degrees C, which is much lower than their melting point, ca. 1060 degrees C. The shape transformation of gold nanoparticles induced by a single pulse of a Nd:YAG laser (lambda = 355 nm, pulse width = 30 ps) was directly observed by a transmission electron microscope (TEM). Analysis of the experimental data showed that the threshold energy for photothermally induced shape transformation was on the order of 40 fJ for a particle, which is smaller than the energy, 67 fJ, required for its complete melting. Estimations based on the heat balance and surface melting model revealed that the temperature which particles reach after a single laser pulse was about 940 degrees C, with the thickness of the liquid layer on the surface of the solid core being 1.4 nm. We also examined thermally induced shape transformation of gold nanoparticles on Si substrates; above 950 degrees C they changed their shapes to spheres, which supported our estimation. Due to the surface melting of particles, their shape transformation occurs at a temperature much lower than their melting point.     

Synthesis of gold nanoparticles in sol–gel glass porogens containing [bmim][BF4] ionic liquid

The [bmim][BF₄] ionic liquid effect on gold nanoparticles formation in silica sol–gel materials is studied in order to produce gel-derived glasses with optical properties. The characteristic red color from gold nanoparticles is observed for transparent glass monoliths obtained sintering, between 365 and 425 °C, a silica sol–gel precursor containing HAuCl₄·3H₂O and [bmim][BF₄], under normal atmospheric conditions. The effect of sintering the ionogel at different temperatures (T_sint) or times (t_sint) on the optical properties, shape, size, and distribution of gold nanoparticles is discussed. Presence of the gold particles is observed using transmission electron microscopy images followed by energy dispersive X-ray spectroscopy analysis. The thermal decomposition of [bmim][BF₄] in the ionogel is investigate using calorimetric and spectroscopic techniques, and by analysis of volatile compounds released by the sol–gel material during sintering. With these results a mechanism for the formation of the gold nanoparticles is proposed, where a first ionic liquid degradation step provides the reductive environment that enables the gold nanoparticles production at the range of temperatures between 350 and 425 °C. Upon sintering the synthesized materials the ionic liquid acts as a sacrificial additive and the ionic liquid thermal decomposition products enables the formation of gold nanoparticles in the sol–gel matrix.     

Nanovalve-controlled cargo release activated by plasmonic heating

The synthesis and operation of a light-operated nanovalve that controls the pore openings of mesoporous silica nanoparticles containing gold nanoparticle cores is described. The nanoparticles, consisting of 20 nm gold cores inside ~150 nm mesoporous silica spheres, were synthesized using a unique one-pot method. The nanovalves consist of cucurbit[6]uril rings encircling stalks that are attached to the ~2 nm pore openings. Plasmonic heating of the gold core raises the local temperature and decreases the ring-stalk binding constant, thereby unblocking the pore and releasing the cargo molecules that were preloaded inside. Bulk heating of the suspended particles to 60 °C is required to release the cargo, but no bulk temperature change was observed in the plasmonic heating release experiment. High-intensity irradiation caused thermal damage to the silica particles, but low-intensity illumination caused a local temperature increase sufficient to operate the valves without damaging the nanoparticle containers. These light-stimulated, thermally activated, mechanized nanoparticles represent a new system with potential utility for on-command drug release.     

Size-dependent spontaneous alloying of Au-Ag nanoparticles

We report on systematic studies of size-dependent alloy formation of silver-coated gold nanoparticles (NPs) in aqueous solution at ambient temperature using X-ray absorption fine structure spectroscopy (XAFS). Various Au-core sizes (2.5-20 nm diameter) and Ag shell thicknesses were synthesized using radiolytic wet techniques. The equilibrium structures (alloy versus core-shell) of these NPs were determined in the suspensions. We observed remarkable size dependence in the room temperature interdiffusion of the two metals. The interdiffusion is limited to the subinterface layers of the bimetallic NPs and depends on both the core size and the total particle size. For the very small particles (< or =4.6 nm initial Au-core size), the two metals are nearly randomly distributed within the particle. However, even for these small Au-core NPs, the interdiffusion occurs primarily in the vicinity of the original interface. Features from the Ag shells do remain. For the larger particles, the boundary is maintained to within one monolayer. These results cannot be explained either by enhanced self-diffusion that results from depression of the melting point with size or by surface melting of the NPs. We propose that defects, such as vacancies, at the bimetallic interface enhance the radial migration (as well as displacement around the interface) of one metal into the other. Molecular dynamics calculations correctly predict the activation energy for diffusion of the metals in the absence of vacancies and show an enormous dependence of the rate of mixing on defect levels. They also suggest that a few percent of the interfacial lattice sites need to be vacant to explain the observed mixing.     

The properties of silica nanoparticles with high monodispersity synthesized in the microreactor system

A new combined micromixer/microreactor/batch reactor system for the synthesis of monodisperse silica particles was demonstrated, which showed superiorities over the batch reactor. The silica nanoparticles with different sizes (ranging from 20 nm to 2 μm) and size distributions could be controllably synthesized by varying the reaction temperature and reaction time. The narrowest size distribution of the silica particles was synthesized at 60 °C. The transmission electron microscopy characterization showed that the sphericities of silica particles got better as the particle size increased. Thermal gravimetry–differential thermal analysis and Fourier transform infrared characterization indicated that the amount of ethoxy groups of silica particles decreased and the hydroxyl groups increased with the reaction time increasing. And the hydroxyl groups in silica particles increased with the reaction temperature rising.     

密堆积六方结构Ni纳米颗粒的制备与表征

采用溶胶-凝胶方法制备前驱体, 将前驱体进行热处理制得密堆积六方结构(hcp)的Ni纳米粉末. 利用TG-DTA, XRD和TEM等测试手段对材料的合成条件、结构、形貌以及结构演变过程进行了分析. 结果表明, 于300 ℃进行热处理所合成的样品为球形的具有密堆六方结构的Ni纳米颗粒, 晶胞参数a=0.2652 nm, c=0.4334 nm, 平均晶粒尺寸约为12 nm. 随着热处理温度的升高, 样品结构发生由密堆六方结构向面心立方结构的转变.     

Investigation on Structures and Properties of Shape Memory Polyurethane/Silica Nanocomposites

In this study, high performance shape memory polyurethane (SMPU)/silica nanocomposites with different silica weight fraction including SMPU bulk, 3%, 4.5%, 6%, 7.5%, 10%, were prepared by sol‐gel process initiated by the solid acid catalyst of p‐toluenesulfonic acid (PTSA). Field emission scanning electron microscopy (FE‐SEM) and transmission electron microscopy (TEM) observation show that the silica nanoparticles are dispersed evenly in SMPU/silica nanocomposites. Tensile test and dynamic mechanical analysis (DMA) suggest that the mechanical properties and the glass transition temperature (T_g) of the nanocomposites were significantly influenced by silica weight fraction. Thermogravimetric analysis (TGA) was utilized to evaluate the thermal stability and determine the actual silica weight fraction. The TGA results indicate that the thermal stability can be enhanced with the hybridization of silica nanoparticles. Differential scanning calorimetry (DSC) was conducted to test the melting enthalpy (ΔH) and the results suggest that the ΔH was markedly improved for the SMPU/silica nanocomposites. Thermomechanical test was conducted to investigate the shape memory behavior and the results show that the shape fixity is improved by hybridization of silica and good shape recovery can be obtained with the increasing of cycle number for all the samples.     

Study of CsCl incorporation in silica via sol-gel synthesis catalyzed by biogenic compounds

Incorporation of CsCl in silica via sol-gel route catalyzed by biogenic compounds with three different concentrations of CsCl has been carried out by using organic compounds extracted from Nitzschia spp., a freshwater diatom alga. The visual integrity, nitrogen adsorption and electron microscopies were used to characterize the silica gels obtained from the biocatalysts employing sol-gel process with tetraethylorthosilicate (TEOS) as precursor. The usual sequence for the sol-gel process was used: sol preparation, gelation, aging, drying and heat treatment. Differential thermal analysis (DTA), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used to characterize the incorporation of CsCl in the biomimetic silica. Chemical analysis of the biocatalysts was used to explain the exothermic behavior of the samples during DTA and DSC. The incorporation of CsCl in the silica matrix with a process using biogenic catalysts proved to be more effective compared to another process using inorganic catalysts.     

Preparation of silica-encapsulated hollow gold nanosphere tags using layer-by-layer method for multiplex surface-enhanced raman scattering detection

The use of silica shells offers many advantages in surface-enhanced Raman scattering (SERS)-based biological sensing applications due to their optical transparency, remarkable stability in environmental media, and improved biocompatibility. Here, we report a novel layer-by-layer method for the preparation of silica-hollow gold nanosphere (HGN) SERS tags. Poly(acrylic acid) was used to stabilize Raman reporter-tagged HGNs prior to the adsorption of a coupling agent, after which a silica shell was deposited onto the particle surface using Sto?ber's method. Importantly, competitive adsorption of the Raman reporter molecules and coupling agents, which results in unbalanced loading of reporter molecules on individual nanoparticles, was avoided using this method. As a result, the loading density of reporter molecules could be maximized. In addition, HGNs exhibited strong enhancement effects from the individual particles because of their ability to localize the surface electromagnetic fields through pinholes in the hollow particle structures. The proposed layer-by-layer silica-encapsulated HGN tags showed strong SERS signals as well as excellent multiplexing capabilities.     

Membrane emulsification and solvent pervaporation processes for the continuous synthesis of functional magnetic and Janus nanobeads

We discuss the integration of membrane emulsification and pervaporation processes for the continuous production of functional materials, such as silica-encapsulated magnetite nanoparticle clusters and asymmetric Janus nanoparticles, by the emulsion droplet solvent evaporation method, which has traditionally been performed in small-scale batch systems. An organic solvent containing primary magnetite nanoparticles (～10 nm) coated with oleic acid was dispersed in a continuous aqueous phase by membrane emulsification, which enabled the consistent production of nanoparticle-laden solvent droplets of well-controlled size with narrow size distributions. The solvent was removed from the emulsion by pervaporation. Prior to complete solvent removal, the nanoparticle packing density within the clusters was a function of the residence time in the pervaporation unit. The final clusters formed, ～100-300 nm in size, exhibited the same superparamagnetic behavior as the primary nanoparticles, and were stable in aqueous media with a zeta potential of -70 mV at neutral pH. A facile method was used to coat the nanoclusters with a silica shell, providing sites for surface functionalization with a range of organic ligands. The nanoparticles and clusters were analyzed by a variety of techniques, including TGA, DLS, TEM, EDS, and SQUID. The effects of various parameters, such as the membrane dimensions and flow rate through the unit, on the mass transport rates were elucidated through a parametric modeling study. The applicability of the methods to the production of polymeric beads and more complex particles was demonstrated; to create Janus structures, organic polymer solutions were dispersed as droplets in continuous aqueous phases, and the solvent was subsequently evaporated. The Janus particles consisted either of polymeric cores with magnetite nanoparticles clustered as islands on their surfaces, or of two phase-separated polymers, each constituting half of any given polymeric particle.     

Crystallization of Liquid Gold Nanoparticles by Molecular Dynamics Simulation

Molecular dynamics simulation of the crystallization behavior of liquid gold (Au) nanoparticles, with 1, 2, 3, 4, 5 and 6 nm in diameter, on cooling has been carried out based on the embedded-atom-method potential. With decreasing cooling time, the final structure of the particle changes from amorphous to crystalline structure. We showed that the structure of the fully crystallized particle is polycrystalline face-centered cubic (FCC). The FCC structure of the gold nanoparticle is proved energetically the most stable form. And the final structure of nanoparticles is affected by cooling time and size of nanoparticles. We also showed that the melting point of particles is affected by size of nanoparticles.     

Spacer-mediated synthesis of size-controlled gold nanoparticles using geminis as ligands

We report a new methodology for the size-controlled aqueous synthesis of gold nanoparticles using geminis with different spacers as ligands. Geminis possess a unique structure in which two hydrophobic chains and two polar headgroups are combined via a spacer. We herein demonstrate that the spacer can be used as a tool to control particle size when geminis are used as ligands for gold nanoparticles. Varying the spacer length of geminis yields facile control over the size and size distribution of nanoparticles. For the 18-s-18-capped gold nanoparticles, FTIR and TGA experiments indicate that the geminis form bilayers on the surface of gold nanoparticles, which serve as templates that control the formation of nanoparticles. The smallest particles are obtained with a moderate spacer length (s = 8) because in that case the gemini bilayers interdigitate to the fullest degree to reach the maximum chain-chain interaction, thus yielding the most compact coating on the surface of gold nanoparticles. This work provides a new approach to the size control of nanoparticles.     

Equilibrium morphology of face-centered cubic gold nanoparticles >3 nm and the shape changes induced by temperature

Many of the unique properties of metallic nanoparticles are determined not only by their finite size but also by their shape, defined by the crystallographic orientation of the surface facets. These surfaces (and therefore the nanoparticles themselves) may differ in a number of ways, including surface atom densities, electronic structure, bonding, chemical reactivities, and thermodynamic properties. In the case of gold, it is known that the melting temperature of nanoparticles strongly depends on the crystal size and that the shape may alter considerably (and yet somewhat unpredictably) during annealing. In this work we use first principle calculations and a thermodynamic model to investigate the morphology of gold nanoparticles in the range 3-100 nm. The results predict that the equilibrium shape of gold nanoparticles is a modified truncated octahedron and that the (size-dependent) melting of such particles is preceded by a significant change in the nanoparticle's morphology.     

An investigation of the thermal decomposition of gold acetate

The thermal decomposition characteristics of gold acetate to produce gold nanoparticles were investigated. A rapid and violent fragmentation of the gold acetate particles was observed at approximately 103±20°C when a rapid heating rate of 25°C min⁻¹ was used, leading to formation of nanosized spherical and partially coalesced gold particles. Particle size analysis was used to investigate possible relationships between the gold acetate crystallite size and the gold nanoparticles produced by thermal decomposition. The results indicate rapid (<0.14 ms) coalescence of the gold particles occurs for fragments in close proximity.     

Temperature scanning ultrasonic velocity study of complex thermal transformations in solid lipid nanoparticles

The purpose of this study was to determine whether temperature scanning ultrasonic velocity measurements could be used to monitor the complex thermal transitions that occur during the crystallization and melting of triglyceride solid lipid nanoparticles (SLNs). Ultrasonic velocity ( u) measurements were compared with differential scanning calorimetry (DSC) measurements on tripalmitin emulsions that were cooled (from 75 to 5 degrees C) and then heated (from 5 to 75 degrees C) at 0.3 degrees C min (-1). There was an excellent correspondence between the thermal transitions observed in deltaDelta u/delta T versus temperature curves determined by ultrasound and heat flow versus temperature curves determined by DSC. In particular, both techniques were sensitive to the complex melting behavior of the solidified tripalmitin, which was attributed to the dependence of the melting point of the SLNs on particle size. These studies suggest that temperature scanning ultrasonic velocity measurements may prove to be a useful alternative to conventional DSC techniques for monitoring phase transitions in colloidal systems.