Solid-phase extraction of quaternary ammonium herbicides

This paper highlights recent advances in the solid-phase extraction (SPE) of quaternary ammonium herbicides in water, soil, plant and biological samples. After a brief introduction summarizing the properties of quaternary ammonium herbicides and the difficulties involved in measuring them, attention is paid primarily to solid supports used for isolation and concentration, pre-treatments required for the different matrices, and eluents applied for quantitative desorption of these analytes. The determination techniques used after SPE and applications of the proposed SPE methodology are also briefly discussed.     

Solid-phase extraction of herbicides from well water for determination by gas chromatography-mass spectrometry

A simple, rapid method for isolating herbicides from well water was developed using disposable octadecyl (C₁₈) solid-phase extraction columns. Deuterium-labeled internal standards were used to compensate for any losses that may have occurred during sample preparation owing to matrix effects. Detection by capillary gas chromatography-mass spectrometry in the selected ion monitoring mode minimized the frequency of false-positive results. The accuracy of the method was ± 5% at concentrations > 0.20μg l^?1 for four of the five herbicides studied.     

Solid-phase extraction and sample stacking-micellar electrokinetic capillary chromatography for the determination of multiresidues of herbicides and metabolites

Micellar electrokinetic capillary chromatography (MEKC) with diode array detection was used for the separation of 13 compounds (eight herbicides widely used in agriculture: metribuzin, lenacil, ethofumesate, atrazine, terbutryn, isoproturon, chlorotoluron and linuron, and five of their principal degradation products; namely, deethylatrazine, 2-hydroxyatrazine, deethyl-2-hydroxyatrazine, deisopropylatrazine and 3-chloro-4-methylphenylurea). Peak separation for the 13 analytes was not successful when a single surfactant system was employed, neither sodium dodecyl sulfate (SDS) nor dioctyl sulfosuccinate (DOSS) sodium salt. However, a mixture of these herbicides was successfully separated using a mixed micellar system involving SDS–DOSS in less than 14 min. An application study of an on-line concentration technique for MEKC was carried out to enhance sensitivity. The optimized on-line stacking procedure consisted simply of the addition of 50 mM of sodium chloride to the injection sample, the stacking effect being more intensive as analyte polarity increased. When this stacking procedure was combined with an off-line sample preconcentration step, based on solid-phase extraction, analytes could be detected in the ppb range. The whole method was applied to ultra-high-quality and natural waters. Linear relationships between the analytical signal and the initial analyte concentration were found to be independent of the type of water, except for the more polar analytes for which small differences were observed.     

Solid-phase extraction of acidic herbicides

A discussion of solid-phase extraction method development for acidic herbicides is presented that reviews sample matrix modification, extraction sorbent selection, derivatization procedures for gas chromatographic analysis, and clean-up procedures for high-performance liquid chromatographic analysis. Acidic herbicides are families of compounds that include derivatives of phenol (dinoseb, dinoterb and pentachlorophenol), benzoic acid (acifluorfen, chloramben, dicamba, 3,5-dichlorobenzoic acid and dacthal--a dibenzoic acid derivative), acetic acid [2,4-dichlorophenoxyacetic acid (2,4-D), 4-chloro-2-methylphenoxyacetic acid (MCPA) and 2,4,5-trichlorophenoxyacetic acid (2,4,5-T)], propanoic acid [dichlorprop, fluazifop, haloxyfop, 2-(4-chloro-2-methylphenoxy)propanoic acid (MCPP) and silvex], butanoic acid [4-(2,4-dichlorophenoxy)butanoic acid (2,4-DB) and 4-(4-chloro-2-methylphenoxy)butanoic acid (MCPB)], and other miscellaneous acids such as pyridinecarboxylic acid (picloram) and thiadiazine dioxide (bentazon).     

Ion-pair liquid chromatography--atmospheric pressure ionization mass spectrometry for the determination of quaternary ammonium herbicides

High-performance liquid chromatography coupled with atmospheric pressure ionization mass spectrometry (electrospray and atmospheric pressure chemical ionization) has been used to characterize some quaternary ammonium herbicides (quats). The separation of these compounds was carried out using ion-pair chromatography with heptafluorobutyric acid (15 mM, pH 3.3) and acetonitrile gradient elution for successful coupling to mass spectrometry. Detection limits down to 0.1-4 micrograms l-1 were obtained for spiked tap water following a preconcentration step. Good reproducibilities (day-to-day and run-to-run) were also obtained.     

Solid-phase microextraction for the determination of iodinated trihalomethanes in drinking water.

A headspace solid-phase microextraction (HS-SPME) method has been developed for the determination of iodinated trihalomethanes (ITHMs) in treated water samples. Mixed THMs (bromochloroido-, bromodiiodo-, chlorodiiodo-, dibromoiodo- and dichloroiodo-) were previously synthesized since commercial standards are not available. HS-SPME has shorter equilibration times than direct SPME, a cleaner background and a longer fiber life. Experimental parameters such as the selection of SPME coatings, sample volume, extraction time and addition of salts were studied. The Carbowax-divinylbenzene fiber appears to be the most suitable for the determination of ITHMs. Analytical parameters such as linearity, limit of detection and precision were also evaluated. HS-SPME was compared to liquid-liquid microextraction for the analyses of spiked treated water samples, obtaining a good agreement. It is concluded that HS-SPME has a great potential for drinking water analysis.     

Capillary electrophoresis-mass spectrometry for the analysis of quaternary ammonium herbicides

Conditions for the simultaneous determination of the three herbicides paraquat, diquat and difenzoquat and the two plant growth regulators chlormequat and mepiquat by pressure-assisted capillary electrophoresis coupled to mass spectrometry (ion-trap) using electrospray as ionisation source have been established. A 200 mM formic acid-ammonium formate buffer solution at pH 3.0 with 50% of methanol was used as carrier electrolyte. Some capillary electrophoresis-mass spectrometry parameters such as sheath liquid and sheath gas flow-rates, sheath liquid composition, electrospray voltage andthe CE capillary position were optimised. The MS and MS-MS spectra of positive ions were studied in order to obtain structural information for the confirmation of the identity. The use of labelled standards allowed to confirm fragment ions assignation. The detection limits, based on a signal-to-noise ratio of 3:1, were between 0.5 and 2.5 mg l(-1) with hydrodynamic injection (10 s) and between 1 and 10 microg l(-1) with elecrokinetic injection (20 s, 10 kV) using standards in ultrapure water. Quality parameters such as linearity and run-to-run precision (n=6) were established. Quantitation was carried out using labelled standards. The method has been applied to the analysis of contaminated irrigation water and spiked mineral water samples.     

Combination of supported liquid membrane and solid-phase extraction for sample pretreatment of triazine herbicides in juice prior to capillary electrophoresis determination

A possibility of a combination of supported liquid membrane (SLM) and solid-phase extraction (SPE) for the determination of atrazine at microgram level in different type of fruit juices is presented. In comparison to SPE extraction from juice samples, the application of SLM-SPE enrichment provides much cleaner extracts and the possibility of lowering the limit of detection as low as 30 microg/l. However, it was also shown that by appropriate manipulation of SLM extraction conditions mainly flow-rate of donor phase and volume ratio between donor and acceptor phase, the level of detection can be further decreased to 10 microg/l. The results suggest that the application of SLM extraction prior to SPE is an alternative method for atrazine enrichment from complicated liquid matrices and could be used as routine method for the clean-up of such samples.     

Trace determination of sulfonylurea herbicides in water and grape samples by capillary zone electrophoresis using large volume sample stacking

A sensitive and reliable method using capillary zone electrophoresis with UV-diode array detection has been developed and validated for trace determination of residues of sulfonylurea herbicides in environmental water samples and grapes from different origins. The analytes included are triasulfuron, rimsulfuron, flazasulfuron, metsulfuron-methyl, and chlorsulfuron. Optimum separation has been achieved on a 48.5-cm × 50-μm (effective length 40 cm) bubble cell capillary using 90 mM ammonium acetate buffer, pH 4.8, by applying a voltage of 20 kV at 25 °C and using p-aminobenzoic acid as the internal standard. In order to increase sensitivity, large volume sample stacking with polarity switching has been applied as on-line preconcentration methodology. For water samples, a solid-phase extraction (SPE) procedure based on the use of Oasis HLB cartridges was applied for off-line preconcentration and cleanup. For grape samples, the SPE procedure was achieved with C₁₈ sorbent, after extraction of the compounds with MeOH:H₂O (1:1) by sonication. The limits of detection for the studied compounds were between 0.04 and 0.12 μg/L for water samples and 0.97 and 8.30 μg/kg in the case of grape samples, lower in all cases than the maximum residue limits permitted by the EU for this kind of food. The developed methodology has demonstrated its suitability for the monitoring of these residues in environmental water and grape samples with high sensitivity, precision, and satisfactory recoveries.     

Separation of alkylbenzyl quaternary ammonium compounds by capillary zone electrophoresis with sample stacking injection

Summary A systematic investigation of operational buffer systems, sample preparation and instrument parameters for achieving the best possible performance for determinating an homologous series of N-benzyl-N-alkyl-N,N-dimethylammonium chloride compounds by capillary zone electrophoresis with direct UV detection. The most effective separation was achieved within 3.5 min with the addition of acetonitrile (40%) in a phosphate buffer (20 mM pH 5.2) using a 40 cm fused-silica capillary operating at 25 KV and 20°C. Degassing of all electrolyte solutions and samples was very important. The linearity and repeatability for each compounds were satisfactory. To improve detection limits, on-column sample preconcentration, sample stacking, was investigated achieving a tenfold enrichment factor and quantitation limits about 10⁻⁷M.     

Solid-phase extraction followed by high-performance liquid chromatography-ionspray interface-mass spectrometry for monitoring of herbicides in environmental water

In this work we developed a sensitive and specific multiresidue method, based on reversed-phase liquid chromatography-mass spectrometry, with an ionspray interface (LC-ISI-MS), for determining 52 of most representative compounds of herbicides in water samples. The procedure used involved passing 0.5 l of surface water, 2 l of ground water and 4 l of drinking water samples, respectively, through a 0.5 g graphitized carbon black (GCB) extraction cartridge. Base-neutral and acid herbicides were differential eluted from GCB cartridge and follow analyzed by HPLC-ISI-MS apparatus. A conventional 4.6-mm-ID reversed-phase LC C18 column, operating with a mobile phase flow-rate of 1 ml/min, was used to chromatograph the analytes. A flow of 100 microl/min of the column effluent was diverted to the ISI source. The study demonstrates the sensitivity of the technique, with detection limit under 10 ng/l in drinking water samples. Performance data for the method such as recovery and precision are also reported.     

Solid-phase extraction of sulfonylurea herbicides from water samples with single-walled carbon nanotubes disk

Microchimica Acta - This study presents a new, easily made and practical solid-phase extraction disk, a single-walled carbon nanotubes (SWCNTs) disk. The properties of the disk were evaluated by...     

Solid-phase extraction and large-volume sample stacking with an electroosmotic flow pump in capillary electrophoresis for determination of methotrexate and its metabolites in human plasma

This paper describes approaches for large-volume sample stacking (LVSS) with an EOF pumpin CE for the determination of methotrexate (MTX) and its metabolites in human plasma. After pretreatment of plasma through a SPE cartridge, a large sample volume was loaded by hydrodynamic injection (3 psi, 70 s) into the capillary filled with phosphate buffer (70 mM, pH 6.0) containing 0.01% polyethylene oxide. Following removal of a large plug of sample matrix from the capillary using polarity switching (-25 kV), the separation of anionic analytes was subsequently performed without changing polarity again, achieving an improvement of sensitivity of around a 100-fold. The method was applied to therapeutic drug monitoring of MTX in one acute lymphoblastic leukemia patient. This study is one of very few applications showing the feasibility of LVSS in analysis of biological samples by CE.     

Ion-trap versus quadrupole for analysis of quaternary ammonium herbicides by LC-MS

Summary An ion-trap mass spectrometer for determination of quaternary ammonium herbicides in water samples is evaluated. Implementation of the method previously optimized in a quadrupole mass spectrometer (VG Platform II) in an ion-trap (LCQ) required modifications to the sample inlet of the electrospray source. Quality parameters were established and detection limits, after trace enrichment, range 5–50 ng L⁻¹. Good reproducibilities (day-to-day and run-to-run) <12% were obtained. The method was applied to analysis of spiked samples and the results were comparable with those determined using a quadrupole mass spectrometer.     

High precision procedure for determination of selected herbicides and their degradation products in drinking water by solid-phase extraction and gas chromatography-mass spectrometry

For target monitoring of selected herbicides in groundwater transport studies, a precise and accurate method for the determination of atrazine (ATR), desethylatrazine (DEAT) and 2,6-dichlorobenzamide (BAM) was developed. The method is based on solid-phase extraction and GC-MS analysis. Deuterated standards are used as surrogates for calibration by the overall procedure. For legal requirements the method described was validated and is regularly subject to external quality control. Typical limits of detection are 2 ng/l. Uncertainty contributions were evaluated using the GUM workbench modelling software. At the concentration level of interest (100 ng/l), an expanded uncertainty of no more than 10% was estimated. Accurate data on the distribution of ATR, DEAT and BAM in affected well fields enabled operational changes to be implemented to control the drinking water supply according to legal requirements.     

Multiresidue determination of sulfonylurea herbicides by capillary electrophoresis for hydrolysis studies in water and sediments

Twelve sulfonylurea herbicides (bensulfuron-methyl, sulfometuron-methyl, ethametsulfuron-methyl, triasulfuron, tribenuron-methyl, nicosulfuron, chlorimuron-ethyl, thifensulfuron-methyl, primisulfuron-methyl, metsulfuron-methyl, chlorsulfuron, and amidosulfuron) were separated by free zone capillary electrophoresis with migration times less than 20 min. The additional simultaneous determination of the 2,3-dihydro-3-oxobenzisosulfonazole (saccharin) degradation product was possible after application of a temperature and voltage gradient. Detector responses (absorbances) at 239 and 220 nm were linear between 0.1 and 10.0 g/ml. After extraction with acetonitrile, recoveries for the same concentration range from two different sediments were higher than 90% with variation coefficients lower than 16%. Dissociation constants of the sulfonylurea herbicides were determined.     

On-line ion-pair solid-phase extraction-liquid chromatography-mass spectrometry for the analysis of quaternary ammonium herbicides

An ion-pair on-line solid-phase extraction procedure using C8 extraction disks, suitable for liquid chromatography-mass spectrometry analysis is developed to determine quaternary ammonium herbicides (quats) in water samples. The separation of these compounds was performed using ion-pair chromatography with heptafluorobutyric acid (15 mM, pH 3.3) and acetonitrile gradient elution. Detection was carried out using a quadrupole mass spectrometer. Water sample volumes up to 50 ml can be preconcentrated with recoveries higher than 70%. Good precision and accuracy (day-to-day and run-to-run) were obtained and the detection limits ranged from 6 to 85 ng l(-1). The proposed on-line ion-pair solid-phase method enables compliance with European Community directives for drinking waters (100 ng l(-1)).     

Solid-phase extraction and spectrophotometric determination of trace amounts of copper in water samples

A simple method for rapid and selective extraction, preconcentration and determination of copper as it's neocuproine complex by using octadecylsilica membrane disks and spectrophotometry is presented. Extraction efficiency and the influence of flow rates of sample solution and eluent, pH, amount of neocuproine and hydroxylamine hydrochloride, type and least amount of eluent for elution of copper complex from disks, break through volume and limit of detection were evaluated. Also the effects of various cationic interferences on percent recovery of copper were studied. Extraction efficiencies >99% were obtained by elution of the disks with minimal amount of solvent. The limit of detection of the proposed method is 0.12 ppb. The method was applied to the recovery and determination of copper in different water samples.     

毛细管电泳法快速检测饮用水中的常见阴离子

用毛细管电泳法快速检测饮用水中常见的阴离子,并对几种电解液进行了对比试验,试验结果表明,以TTAOH(十四烷基三甲基氢氧化胺)作电渗流改进剂,pH 9.1的电解液检测效果为最佳;该方法所检离子线性相关系数均在0.999以上.