Nitroxide‐mediated controlled radical polymerization of 2‐hydroxyethyl methacrylate (HEMA) is achieved using the copolymerization method with a small initial concentration of acrylonitrile (AN, 5–16 mol%)) or styrene (S, 5–10 mol%). The polymerization is mediated by N‐tert‐butyl‐N‐(1‐diethyl phosphono‐2,2‐dimethyl propyl) nitroxide (SG1)‐based BlocBuilder unimolecular alkoxyamine initiator modified with an N‐succinimidyl ester group (N‐hydroxysuccinimide‐BlocBuilder). As little as 5% molar feed of acrylonitrile results in a controlled polymerization, as evidenced by a linear increase in number average molecular weight M n with conversion and dispersities (? ) as low as 1.30 at 80% conversion in N ,N‐dimethylformamide (DMF) at 85 °C. With S as the controlling comonomer, higher initial S composition (≈10 mol%) is required to maintain the controlled copolymerization. Poly(HEMA‐ran‐AN)s with M n ranging from 5 to 20 kg mol?1 are efficiently chain extended using n‐butyl methacrylate/styrene mixtures at 90.0 °C in DMF, thereby showing a route to HEMA‐based amphiphilic block copolymers via nitroxide‐mediated polymerization.
Amino acid N‐thiocarboxyanhydride (NTA), the thioanalog of N‐carboxyanhydride (NCA), is much more stable than NCA against moisture and heat. The convenient monomer synthesis without rigorous anhydrous requirements makes the ring‐opening polymerization of NTA a competitive alternative to prepare polypeptoid‐containing materials with potential of large‐scale production. Polysarcosines (PSars) with high yields (>90%) and low polydispersities (<1.2) are synthesized from sarcosine N‐thiocarboxyanhydride (Sar‐NTA) at 60 °C initiated by primary amines including poly(ethylene glycol) amine (PEG–NH2). The lengths of PSar segments are controlled by various feed ratios of Sar‐NTA to initiator. PEG‐b‐PSar products, a class of novel double‐hydrophilic diblock copolymers, are effective in stabilizing oil‐in‐water emulsions at nano‐ and microscale, which demonstrates promising encapsulation applications in food, cosmetics, and drug delivery. Due to the different solubility of PEG and PSar blocks, PEG‐b‐PSar copolymers form micelles in organic solvents with the capability to incorporate metal cations including Cu2+ and Ni2+.
A commercially available palladium N‐heterocyclic carbene (Pd‐NHC) precatalyst is used to initiate chain‐growth polymerization of 2‐bromo‐3‐hexyl‐5‐trimethylstannylthiophene. The molecular weight of the resultant poly(3‐hexylthiophene) can be modulated (7 to 73 kDa, Đ = 1.14 to 1.53) by varying the catalyst concentration. Mass spectrometry data confirm control over the polymer end groups and 1H NMR spectroscopy reveals that the palladium catalyst is capable of “ring‐walking”. A linear relationship between Mn and monomer conversion is observed. Atomic force microscopy and X‐ray scattering verify the regioregular nature of the resultant polythiophene.
(1‐Adamantyl)methyl glycidyl ether (AdaGE) is introduced as a versatile monomer for oxyanionic polymerization, enabling controlled incorporation of adamantyl moieties in aliphatic polyethers. Via copolymerization with ethoxyethyl glycidyl ether (EEGE) and subsequent cleavage of the acetal protection groups of EEGE, hydrophilic linear polyglycerols with an adjustable amount of pendant adamantyl moieties are obtained. The adamantyl unit permits control over thermal properties and solubility profile of these polymers (LCST). Additionally, AdaGE is utilized as a termination agent in carbanionic polymerization, affording adamantyl‐terminated polymers. Using these structures as macroinitiators for the polymerization of ethylene oxide affords amphiphilic, in‐chain adamantyl‐functionalized block copolymers.
Photoinitiated reversible addition‐fragmentation chain transfer (RAFT) dispersion polymerization of 2‐hydroxypropyl methacrylate is conducted in water at low temperature using thermoresponsive copolymers of 2‐(2‐methoxyethoxy) ethyl methacrylate and oligo(ethylene glycol) methacrylate (Mn = 475 g mol−1) as the macro‐RAFT agent. Kinetic studies confirm that quantitative monomer conversion is achieved within 15 min of visible‐light irradiation (405 nm, 0.5 mW cm−2), and good control is maintained during the polymerization. The polymerization can be temporally controlled by a simple “ON/OFF” switch of the light source. Finally, thermoresponsive diblock copolymer nano‐objects with a diverse set of complex morphologies (spheres, worms, and vesicles) are prepared using this particular formulation.
Triptycene‐based micorporous polymer is functionalized with CO2‐philic tetrazole moieties via ZnCl2‐catalyzed post‐polymerization. Gas adsorption experiments indicate that it possesses high CO2 uptake capacity, reaching 134 cm3 g−1 (26.5 wt%) at 1.0 bar and 273 K, along with high selectivity towards CO2 over N2 and CH4. The porous polymeric networks present the promising potentials as efficient adsorbents in clean energy applications.
The polymerization of ocimene has been first achieved by half‐sandwich rare‐earth metal dialkyl complexes in combination with activator and AliBu3. The regio‐ and stereoselectivity in the ocimene polymerization can be controlled by tuning the cyclopentadienyl ligand and the central metal of the complex. The chiral cyclopentadienyl‐ligated Sc complex 1 prepares syndiotactic cis‐1,4‐polyocimene (cis‐1,4‐selectivity up to 100%, rrrr = 100%), while the corresponding Lu, Y, and Dy complexes 2 – 4 and the achiral pentamethylcyclopentadienyl Sc, Lu, and Y complexes 5 – 7 afford isotactic trans‐1,2‐polyocimenes (trans‐1,2‐selectivity up to 100%, mm = 100%).
Copolymers of 2‐(N,N‐dimethylamino)ethyl acrylate (DMAEA) and 2‐(tert‐Boc‐amino)ethyl acrylate (t BocAEA) are synthesized by reversible addition–fragmentation chain transfer polymerization in a controlled manner with defined molar masses and narrow molar masses distributions (Ð ≤ 1.17). Molar compositions of the P(DMAEA‐co‐t BocAEA) copolymers are assessed by means of 1H NMR. A complete screening in molar composition is studied from 0% of DMAEA to 100% of DMAEA. Reactivity ratios of both comonomers are determined by the extended Kelen–Tüdos method (r DMAEA = 0.81 and rtBocAEA = 0.99).
Star copolymers are known to phase separate on the nanoscale, providing useful self‐assembled morphologies. In this study, the authors investigate synthesis and assembly behavior of miktoarm star (μ‐star) copolymers. The authors employ a new strategy for the synthesis of unprecedented μ‐star copolymers presenting poly(N‐octyl benzamide) (PBA) and poly(ε‐caprolactone) (PCL) arms: a combination of chain‐growth condensation polymerization, styrenics‐assisted atom transfer radical coupling, and ring‐opening polymerization. Gel permeation chromatography, mass‐analyzed laser desorption/ionization mass spectrometry, and 1H NMR spectroscopy reveal the successful synthesis of a well‐defined (PBA11)2‐(PCL15)4 μ‐star copolymer (M n,NMR ≈ 12 620; Đ = 1.22). Preliminary examination of the PBA2PCL4 μ‐star copolymer reveals assembled nanofibers having a uniform diameter of ≈20 nm.
This work is focused on montmorillonite (MMT)‐based “support‐activators” (S‐As) for the metallocene‐catalyzed propylene polymerization. This catalyst was previously industrialized; however, for further technological advances, the activation mechanism is investigated. The chemical and morphological requirements of the S‐A are surveyed using both commercially available raw clay minerals (non‐acid‐treated) and acid‐treated clay minerals. The S‐A possessing strong‐acid sites (pK a < ?8.2) gives a highly active catalyst. Acid treatment of MMT induces morphological changes as well as the formation of strong acid sites. Based on pore size distribution analysis and atomic force microscopy observations, it is concluded that the strong acid sites are located in the small pores around the edge of the clay mineral (not in the interlayer), where the structure is disordered by the acid treatment.
High‐molecular‐weight conjugated polymer HD‐PDFC‐DTBT with N‐(2‐hexyldecyl)‐3,6‐difluorocarbazole as the donor unit, 5,6‐bis(octyloxy)benzothiadiazole as the acceptor unit, and thiophene as the spacer is synthesized by Suzuki polycondensation. HD‐PDFC‐DTBT shows a large bandgap of 1.96 eV and a high hole mobility of 0.16 cm2 V−1 s−1. HD‐PDFC‐DTBT:PC71BM‐based inverted polymer solar cells (PSCs) give a power conversion efficiency (PCE) of 7.39% with a Voc of 0.93 V, a Jsc of 14.11 mA cm−2, and an FF of 0.56.
The effect of prepolymerization on ethylene homopolymerization and ethylene/1‐hexene copolymerization with a commercial TiCl4/MgCl2 catalyst was investigated and the apparent homo‐ and copolymerization rate constants were estimated by varying polymerization temperature, pressure, time, and 1‐hexene/ethylene molar ratio during the prepolymerization. The apparent rate constants for activation, propagation, and deactivation depend on the prepolymerization conditions, showing that the prepolymerization stage strongly regulates the behavior of the catalyst in the main polymerization. Interestingly, the surface morphology of the prepolymer particles correlates to and explains these changes in polymerization kinetics behavior.
Reversible addition‐fragmentation chain transfer polymerization yields reactive block copolymers bearing the pentafluorophenyl ester (PFPA) group, and subsequent Click amidation using 2,2,6,6‐tetramethylpiperidine‐N‐oxyl‐ and imidazolium‐functionalized primary amines produces the corresponding functional block copolymers, leading to installation of statistical radical‐ and ionic sites into the PFPA segment. The monolayered thin film devices fabricated using the obtained block copolymers exhibit repeatable switching of electric conductivity (on/off ratio > 103) under a bias voltage, which reveals that the coexistence of radicals and ions in the same spherical domain of the copolymer layer is a prerequisite for repeatable switching memory.
Ethylene–propylene–methyl methacrylate (MMA) and ethylene–hexene–MMA A‐B‐C block copolymers with high molecular weight (>100 000) are synthesized using fluorenylamide‐ligated titanium complex activated by modified methylaluminoxane and 2,6‐di‐tert‐butyl‐4‐methylphenol for the first time. After diblock copolymerization of olefin is conducted completely, MMA is added and activated by aluminum Lewis acid to promote anionic polymerization. The length of polyolefin and poly (methyl methacrylate) (PMMA) is controllable precisely by the change of the additive amount of olefin and polymerization time, respectively. A soft amorphous polypropylene or polyhexene segment is located between two hard segments of semicrystalline polyethylene and glassy PMMA blocks.
The homopolymerization of the water‐insoluble N‐(isobutoxymethyl)acrylamide (IBMA) is investigated for the first time by nitroxide‐mediated polymerization. The homopolymerization is characterized by a linear increase in number average molecular weight (Mn) versus conversion (X) to X > 0.80 while maintaining dispersities of Mw/Mn < 1.30. A strong Arrhenius relationship correlates the apparent rate constants and the homopolymerization temperatures between 105 and 120 °C. All poly(IBMA) homopolymers are then successfully chain‐extended with styrene (S) to form well‐defined block copolymers of poly(IBMA)‐b‐poly(S) suggesting a high degree of livingness of the poly(IBMA) macroinitiators. Thermogravimetric analysis and differential scanning calorimetry are both used to characterize the thermal properties of the homopolymers and block copolymers and identify possible unique degradation of the poly(IBMA) block through imide formation at elevated temperatures.
The polymerisation of N‐acryloylmorpholine in water is reported utilising Cu(0)‐mediated living radical polymerisation (SET‐LRP). The inherent instability of [CuI(Me6‐Tren)Br] in aqueous solution is exploited via rapid disproportionation to prepare Cu(0) particles and [CuII(Me6‐Tren)Br2] in situ prior to addition of monomer and initiator. Quantitative conversion is attained within 30 min for various degrees of polymerisation (DPn = 20–640) with SEC showing symmetrical narrow molecular weight distributions (Đ < 1.18) in all cases. Optimised conditions are subsequently applied for the preparation of a diblock copolymer poly(NIPAm)‐b‐(N‐acryloylmorpholine), illustrating the versatility of this approach.
The reactivity ratios for the bulk free‐radical copolymerization of n‐butyl acrylate (BA)/n‐butyl methacrylate (BMA) are estimated at 80 °C. By performing a series of low conversion runs including replicate runs, the reactivity ratios are estimated as rBA = 0.460 and rBMA = 2.008. Runs to high conversions are then conducted at three different feed compositions (fBMA = 0.2, 0.5, and 0.8) to validate the reactivity ratios. The composition data from the high conversion experiments show good agreement with the estimated reactivity ratios in the integrated form of the Mayo–Lewis model. The molecular weight, gel content, and glass transition temperature of BA/BMA copolymers are also determined.
A direct and facile route toward semitelechelic polymers, end‐functionalized with palladated sulfur–carbon–sulfur pincer (PdII‐pincer) complexes is reported that avoids any post‐polymerization step. Key to our methodology is the combination of reversible addition‐fragmentation chain‐transfer (RAFT) polymerization with functionalized chain‐transfer agents. This strategy yields Pd end‐group‐functionalized materials with monomodal molar mass dispersities (Đ ) of 1.18–1.44. The RAFT polymerization is investigated using a PdII‐pincer chain‐transfer agent for three classes of monomers: styrene, tert‐butyl acrylate, and N‐isopropylacrylamide. The ensuing PdII‐pincer end‐functionalized polymers are analyzed using 1H NMR spectroscopy, gel‐permeation chromatography, and elemental analysis. The RAFT polymerization methodology provides a direct pathway for the fabrication of PdII‐pincer functionalized polymers with complete end‐group functionalization.
Amphiphilic block copolymers of 2,3,4,5,6‐pentafluorostyrene (PFS) and methacrylic acid (MAA) are synthesized via nitroxide‐mediated polymerization (NMP). It is established that to obtain a controlled copolymerization a minimum of 40 mol% of PFS is required, which is significantly greater than other copolymerization systems such as using 4.5–8 mol% styrene or 1 mol% of 9‐(4‐vinylbenzyl)‐9H‐carbazole to control the copolymerization of methacrylates. It is surmised that this lack of control is due to the reactivity ratios that favor the addition of MAA rather than PFS (rPFS = 0.14, rMAA = 6.97). However this reactivity ratio pair suggests that a one‐shot delayed injection approach can be utilized to synthesize almost pure block copolymers in one pot. Therefore, poly(PFS)‐b‐(PFS‐ran‐MAA) block copolymers are synthesized by a one‐shot delayed addition of MAA. While the concentration of irreversibly terminated chains is evident these results suggest a promising route to the synthesis of fluorinated amphiphilic block copolymers by NMP.
A copolymer from N‐isopropylacryl amide (NIPAAm) and N‐homocysteine thiolactone acrylamide (TlaAm), prepared by RAFT polymerization, is reacted with various amines, bearing alkyl residues of increasing length (n‐propylamine, n‐hexylamine, and n‐dodecylamine) to liberate the corresponding thiol, which is consequently reacted in situ with 2‐bromoethyl‐2′,3′,4′,6′‐tetra‐O‐acetyl‐α‐d ‐mannopyranoside. The resulting double‐modified graft copolymers show characteristic self‐assembly behavior due to their amphiphilic nature, affording glycopolymer‐based nanoparticles. While the n‐propylamine‐derived amphiphiles mainly lead to micelles (30 nm), the n‐hexylamine adducts give rise to larger vesicles (200–600 nm). Longer alkyl amines result in the formation of large compound micelles. The assembled nanoparticles are bioactive and interact effectively with Concanavalin A (ConA).
下载免费PDF全文