Bifurcations of rotating structures in a parabolic functional differential equation

We investigate the Andronov-Hopf bifurcation of the birth of a periodic solution from a space-homogeneous stationary solution of the Neumann problem on a disk for a parabolic equation with a transformation of space variables in the case where this transformation is the composition of a rotation by a constant angle and a radial contraction. Under general assumptions, we prove a theorem on the existence of a rotating structure, deduce conditions for its orbital stability, and construct its asymptotic form. __________ Translated from Neliniini Kolyvannya, Vol. 9, No. 2, pp. 155–169, April–June, 2006.     

Effect of boundaries of various shapes on vortex dynamics

The motion of a vortex near a boundary of arbitrary shape is considered within the framework of a two-dimensional problem. Integrable differential equations of motion are obtained. Two forms of the algebraic equation of the vortex trajectories are derived. Examples of vortex motion near a straight-line boundary, in a channel, in an angular domain, in the neighborhood of a flat edge, in a round basin, and near a parabolic boundary.     

Dynamics of a quantized circle homeomorphism with quasiperiodic perturbation

We introduce the notion of a quantized circle homeomorphism that is a discontinuous mapping of an interval shift, which is widely used in modern digital radio electronics. For a two-dimensional dynamical system given by a triangular mapping, which is a quantized circle homeomorphism with quasiperiodic perturbation, we prove, under some assumptions, that there exist an invariant absorbing belt and a repulsive contour, study properties of these structures, and get estimates for their sizes. To make the exposition complete, we, first, study the corresponding problems for three less complicated systems, namely, a proper circle homeomorphism, a proper circle homeomorphism with quasiperiodic perturbation, and a quantized circle homeomorphism without perturbation.     

介电高弹聚合物理论

软材料受刺激会发生变形, 该变形会引起相应的功能, 这种材料称为活性软材料(soft active material, SAM). 本综述主要讨论介电高弹聚合物这一类活性软材料. 当介电高弹聚合物薄膜受到厚度方向的电压作用时, 薄膜厚度减小同时面积增大, 可导致超过100{\%}的应变. 介电高弹聚合物作为转换器被广泛应用, 包括柔性机器人、智能光学器件、盲文显示屏、发电机等. 本文综述了建立在连续介质力学和热力学框架内的、并且基于分子理论描述和经验观测的介电高弹聚合物理论. 该理论耦合了大变形和电势, 描述了非线性和非平衡行为, 如力电失稳和黏弹性. 采用该理论能够通过有限元方法模拟实际构型的转换器, 计算力电能量转换的效率, 给出电致大变形的可行途径. 该理论有助于材料和器件设计.     

Deformability of thin metal films on elastomer substrates

Recent applications in flexible electronics require that thin metal films grown on elastomer substrates be deformable. However, how such laminates deform is poorly understood. While a freestanding metal film subject to tension will rupture at a small strain by undergoing a necking instability, we anticipate that a substrate will retard this instability to an extent that depends on the relative stiffness and thickness of the film and the substrate. Using a combination of a bifurcation analysis and finite element simulations, we identify three modes of tensile deformation. On a compliant elastomer, a metal film forms a neck and ruptures at a small strain close to that of a freestanding film. On a stiff elastomer, the metal film deforms uniformly to large strains. On an elastomer of intermediate compliance, the metal film forms multiple necks, deforms much beyond the initial bifurcation, and ruptures at a large strain. Our theoretical predictions call for new experiments.     

On setting a pressure datum when computing incompressible flows

The conventional approach to set the pressure level in a finite element discretization of an enclosed, steady, incompressible flow is to discard a continuity residual and set the associated pressure basis function coefficient to a desired value. Two issues surrounding this setting of a pressure datum are explored. First, it is shown that setting a boundary traction at a single node, in lieu of a Dirichlet velocity condition, is a preferred alternative for use with pressure‐stabilized finite element methods. Second, it is shown that setting a pressure datum can slow or even stop the convergence of a GMRES‐based iterative solver; though by some appearances a solution may appear to be converged, significant local errors in the velocity may exist. Under such circumstances it is preferable to solve the consistent singular system of equations, rather than setting a pressure datum. It is shown that GMRES converges in such cases, implicitly setting a pressure level that is determined from the initial guess. © 1999 John Wiley & Sons, Ltd.     

On configurational balance in slender bodies

We propose a new derivation of the evolution equation of a sharp, coherent interface in a two-phase body having elongated shape, a body which we regard as a one-dimensional micropolar continuum. To this aim, we introduce a system of forces acting at the interface, and we apply the method of virtual powers to derive a balance law involving these forces. By exploiting the dissipation inequality, we manage to write this balance law in terms of a scalar field whose form is reminiscent of a well-known expression for the configurational stress in three dimensional micropolar continua.     

Flow of a gas behind a Chapman-Jouguet detonation wave in the vicinity of a line of discontinuity of a surface wave curvature

This paper discusses questions of constructing a solution of the gasdynamic equations near a line of curvature discontinuity at the surface of a detonation wave, propagating under Chapman—Jouguet conditions. It describes the construction of the solution in two cases: in a flow arising with the initiation of a detonation along a half-plane in a quiescent homogeneous combustible gas and in a flow arising with the initiation of a detonation along a half-line under these same conditions.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 120–126, January–February, 1978.     

Practical techniques for a three‐dimensional FEM analysis of incompressible fluid flow contained with slip walls and a downstream tube bundle

Two practical techniques are proposed in this paper to simulate a flow contained in a plenum with a downstream tube bundle under a PC environment. First, a technique to impose slip wall conditions on smooth‐faced planes and sharp edges is proposed to compensate for the mesh coarseness relative to boundary layer thickness. In particular, a new type of Poisson equation is formulated to simultaneously satisfy both such velocity boundary conditions on walls and the incompressibility constraint. Second, a numerical model for a downstream tube bundle is proposed, where hydraulic resistance in a tube is imposed as a traction boundary condition on a fluid surface contacting the tube bundle end. The effectiveness of the techniques is numerically demonstrated in the application to a flow in a condenser water box. Copyright © 2001 John Wiley & Sons, Ltd.     

Large deformation and electrochemistry of polyelectrolyte gels

Immersed in an ionic solution, a network of polyelectrolytes imbibes the solution and swells, resulting in a polyelectrolyte gel. The swelling is reversible, and the amount of swelling is regulated by ionic concentrations, mechanical forces, and electric potentials. This paper develops a field theory to couple large deformation and electrochemistry. A specific material model is described, including the effects of stretching the network, mixing the polymers with the solvent and ions, and polarizing the gel. We show that the notion of osmotic pressure in a gel has no experimental significance in general, but acquires a physical interpretation within the specific material model. The theory is used to analyze several phenomena: a gel swells freely in an ionic solution, a gel swells under a constraint of a substrate, electric double layer at the interface between the gel and the external solution, and swelling of a gel of a small size.     

Finite volume methods for laminar and turbulent flows using a penalty function approach

A penalty function, finite volume method is described for two-dimensional laminar and turbulent flows. Turbulence is modelled using the k-? model. The governing equations are discretized and the resulting algebraic equations are solved using both sequential and coupled methods. The performance of these methods is gauged with reference to a tuned SIMPLE-C algorithm. Flows considered are a square cavity with a sliding top, a plane channel flow, a plane jet impingement and a plane channel with a sudden expansion. A sequential method is employed, which uses a variety of dicretization practices, but is found to be extremely slow to converge; a coupled method, evaluated using a variety of matrix solvers, converges rapidly but, relative to the sequential approach, requires larger memory.     

MECHANICAL ANALYSIS OF TOROFLUX

流动环是一款魔术玩具,具有丰富的力学行为。制作流动环时应用了预应力储存技术,使得环内部储存了弹性弯曲变形能。一经外界扰动,流动环会迅速张开,进入一种新的稳定平衡状态;若给张开的流体环输入某种形式的能量,环会合拢,恢复原有的稳定平衡状态。本文从能量的角度对流动环张开与合拢等现象进行力学分析。     

Transient responses of beams and plates subject to travelling load. Miscellaneous results

The steady-state response of a free and infinite Timoshenko beam is specified analytically in terms of non-dimensional displacements and stresses. The beam is supposed loaded by a travelling concentrated force or a moving step load. By a validated explicit numerical calculation, it is shown how a load travelling on a beam at constant velocity, from defined time and abscissa, generates a response which evolves towards the steady-state solution for a part, and towards a quantified transient solution for another part. Asymptotic values are given for the transient displacements and stresses according to the time and the speed of the loading. The solution is also found for a plate subject to a pressure, which spreads respecting the cylindrical symmetry. It is possible to identify in the response a part which follows the pressure front, and which is comparable with the steady-state response of a beam, and another transient part, which generates displacements and stresses with a much less oscillating character. An asymptotic solution is also presented for the plate.The whole series of the results makes it possible to better understand qualitatively the beginning of the transient response of a beam or of a plate to a moving load, and also makes it possible to estimate the stresses and displacements without needing specialised numerical codes.     

Draft of a nozzle with the circulating outflow of a vortical flow of gas

The presence of circulation in an outflowing gas leads to a change in the working parameters of a nozzle. The question of the mass flow rate and the draft of a nozzle without a diffusor (a point) for twisted flows has been studied theoretically and experimentally [1–6]. The use of nozzles with a supersonic part introduces a considerable degree of complication into the method for the analytical calculation of the draft characteristics and the program for their experimental investigation. In [2, 7], a theory of a nozzle is formulated for a model of a potential circulating flow of gas; in [5, 8], an electronic computer was used to solve the complete system of the equations of gasdynamics for the motion of a rotating flow along a nozzle; in [7, 9], an investigation was made of a variational problem of the shaping of a diffusor for a circulation flow. The calculation of the draft, carried out in the above-mentioned communications (with the exception of [2], in which a study was made of a partial model of an eddyless rotational motion), is bound up with labor-consuming computer calculations. In the present article, in a development of [3, 6], a quasi-one-dimensional theory of a supersonic nozzle for a vortical flow of gas is formulated and verified experimentally.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 145–149, September–October, 1975.     

Global modes in a confined impinging jet: application to heat transfer and control

We investigate the stability and control of a plane, laminar jet impinging on a flat plate in a channel, a geometry used to cool down a hot wall with a cold air jet in many industrial configurations. The global stability analysis indicates that, even for a strong confinement, the two-dimensional (2-D) steady flow is unstable to three-dimensional (3-D), steady perturbations. In the simplest limit case where dilatation effects are neglected, we show that the development of the instability induces a significant spanwise modulation of the heat flux at the impacted wall. To control the leading global mode, we propose adjoint-based 3-D harmonic and 2-D steady forcing in the bulk or at the wall. We show for instance that the unstable mode is controllable using a spanwise uniform blowing at the upper wall, in a specific domain corresponding to the footprint of the upper recirculating bubble. These techniques are applied to a novel open-loop control, in which we introduce into the flow a small airfoil, modelled by the lift force it exerts on the flow.     

Free Energies and Minimal States for Scalar Linear Viscoelasticity

The concept of a minimal state was introduced in recent decades, based on earlier work by Noll. The property that a given quantity is a functional of the minimal state is of central interest in the present work. Using a standard representation of a free energy associated with a linear memory constitutive relation, a new condition, involving linear functionals, is derived which, if satisfied, ensures that the free energy is a functional of the minimal state. Using this result and recent work on constructing free energy functionals, it is shown that if the kernel of the rate of dissipation functional is given by sums of products, the associated free energy functional is a functional of the minimal state.     

Digital Image Mechanical Identification (DIMI)

A continuous pathway from digital images acquired during a mechanical test to quantitative identification of a constitutive law is presented herein based on displacement field analysis. From images, displacement fields are directly estimated within a finite element framework. From the latter, the application of the equilibrium gap method provides the means for rigidity field evaluation. In the present case, a reconditioned formulation is proposed for a better stability. Last, postulating a specific form of a damage law, a linear system is formed that gives a direct access to the (non-linear) damage growth law in one step. The two last procedures are presented, validated on an artificial case, and applied to the case of a biaxial tension of a composite sample driven up to failure. A quantitative estimate of the quality of the determination is proposed, and in the last application, it is shown that no more than 7% of the displacement field fluctuations are not accounted for by the determined damage law.     

基于MEMS压阻传感器的低功耗高过载测试系统设计

为了检验弹体在高冲击环境下的工作情况,提出了一种基于压阻传感器的高过载、低功耗的测试系统设计方案。该系统可承受2×105g的过载冲击测试,且具有采样率高、体积小、功耗低的特点。通过打靶实验验证:在过载测试过程中该系统具有承受高冲击的能力,并能精确地采集到信号微弱变化,保证了弹体在飞行中记录数据的准确性。     

One-dimensional deformations of nonlinearly elastic micropolar bodies

We find families of finite deformations of a Cosserat elastic continuum on which the system of equilibrium equations is reduced to a system of ordinary differential equations. These families can be used to describe the expansion, tension, and torsion of a hollow circular cylinder, cylindrical bending of a rectangular slab, straightening of a circular arch, reversing of a cylindrical tube, formation of screw and wedge dislocations in a hollow cylinder, and other types of deformations. In the case of a physically nonlinear material model, the above-listed families of deformations can be used to construct exact solutions of several problems of strong bending of micropolar bodies.