Preliminary study on application of mid infrared spectroscopy for the evaluation of the virgin olive oil "freshness"

The freshness of virgin olive oils (VOO) from typical cultivars of Garda regions was evaluated by attenuated total reflectance (ATR) and Fourier transform infrared (FTIR) spectroscopy, in combination with multivariate analysis. The olive oil freshness decreased during storage mainly because of oxidation processes. In this research, 91 virgin olive oils were packaged in glass bottles and stored either in the light or in the dark at room temperature for different periods. The oils were analysed, before and after storage, using both chemical methods and spectroscopic technique.Classification strategies investigated were partial least square discriminant analysis (PLS-DA), linear discriminant analysis (LDA), and soft independent modelling of class analogy (SIMCA).The results show that ATR-MIR spectroscopy is an interesting technique compared with traditional chemical index in classifying olive oil samples stored in different conditions. In fact, the FTIR PCA results allowed a better discrimination among fresh and oxidized oils, than samples separation obtained by PCA applied to chemical data. Moreover, the results obtained by the different classification techniques (PLS-DA, LDA, SIMCA) evidenced the ability of FTIR spectra to evaluate the olive oil freshness. FTIR spectroscopy results are in agreement with classical methods. The spectroscopic technique could be applied for the prediction of VOOs freshness giving information related to chemical modifications. The great advantages of this technique, compared to chemical analysis, are related to rapidity, non-destructive characteristics and low cost per sample. In conclusion, ATR-MIR represents a reliable, cheap and fast classification tool able to assess the freshness of virgin olive oils.     

Two‐dimensional Fourier transform infrared correlation spectroscopy and evolving factor analysis in the study of cationic curing of DGEBA and γ‐valerolactone mixtures

Generalized two‐dimensional (2D) correlation spectroscopy and evolving factor analysis (EFA) have been applied to the study of cationic curing reaction of mixtures of diglycidyl ether of bisphenol A (DGEBA) and γ‐valerolactone (γ‐VL). The reaction has been monitored by Fourier transform infrared spectroscopy. The reaction periods in which a chemical change takes place are identified using EFA and then the sequence of changes are established by means of the interpretation of the synchronous and asynchronous spectra obtained with 2D correlation spectroscopy. By combining this information, in the curing process, four reactions have been detected: (1) DGEBA and γ‐VL reaction to obtain a spiroorthoester intermediate, (2) homopolymerization of DGEBA, (3) copolymerization of DGEBA with the spiroorthoester intermediate, and (4) homopolymerization of the spiroorthoester. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3886–3899, 2008     

Adsorption of Water on an MgSO4(100) Surface: A First‐Principles Investigation

The adsorption properties of water molecules on an MgSO₄(100) surface were investigated by using density functional theory (DFT) and supercell models. Optimized stable geometries of one and more than one water molecules adsorbed on an ideal MgSO₄(100) surface were obtained. The configurations with water molecules adsorbed on atoms of the second and third atomic layers of the MgSO₄(100) surface are quite stable. After adsorption, the separations between both the adjacent Mg atoms (R_{Mg? Mg}) and the adjacent O atoms of the surface (R_{O? O}) increase, which indicates that the MgSO₄(100) surface starts to deliquesce. In addition, water molecules are more likely to adsorb onto a defective surface rather than an ideal surface. Mulliken population analysis suggests that fewer charges transfer to the water molecule from the Mg atom of a defective substrate. Finally, Raman spectra were calculated for 0.5, 1, and 2 ML (ML=monolayer) water adsorbed on an MgSO₄(100) surface, which is helpful for further related experiments.     

An experimental study on the “sequential order” rules in generalized two-dimensional correlation spectroscopy

Following our theoretical analysis on the “sequential order” rules in generalized two-dimensional (2D) correlation spectroscopy (H. Huang, Anal. Chem. 79 (2007) 8281–8292), an experimental study was conducted to test the “sequential order” rules using the FT-NIR data of poly(3-hydroxybutyrate) (PHB)/poly(l-lactic acid) (PLA) blends under uniaxial elongation and parallel polarization. The local sequential order concept proposed for the generalized two-dimensional (2D) correlation spectroscopy is now more clearly stated; “the intensity change at ν1 occurs predominantly before ν2” means that the starting time of the intensity change at ν1 is prior to that at ν2. It is this local sequential order which reflects the real and intuitive sequential order between two events in generalized situations. It has been found that the integrated/overall sequential order results obtained from the 2D correlation analysis may be contradictory to the intuitive local sequential order. In addition, different integrated/overall sequential orders could be obtained by selection of different sampling intervals from a certain set of experimental data, or choosing different number of the contours for the same sampling interval. These new experimental findings are a perfect reinforcement to our previous theoretical study and have further demonstrated the uncertainty of applying the “sequential order” rules in generalized 2D correlation spectroscopy.     

Structural and electronic properties of stable Aun (n = 2–13) clusters: A density functional study

All-electron scalar relativistic calculations have been performed to investigate the electronic structures of neutral gold clusters (Au_n, n = 2–13) in the gas phase using density functional theory with the generalized gradient approximation. Full geometry optimizations of topologically different clusters and clusters belonging to different symmetry groups have been carried out. Binding energies, ionization potentials, electron affinities, and chemical hardness values are calculated and they are found to be comparable with the available experimental and theoretical results. The most stable structure of each of the cluster has a two-dimensional planar configuration. A three dimensional distorted Y shaped structure (4b) for Au₄, a tri-capped triangle (6b), a chair (6f), and a see-saw structure (6j) for Au₆, an eclipsed sandwich structure (7g) for Au₇, a condensed trigonal bipyramid (9e) and a boat shaped structure (9f) for Au₉, a staggered sandwich (11c) and an eclipsed sandwich structure (11d) for Au₁₁, a ladderane structure (12d) for Au₁₂, and a staggered (13d) and a distorted sandwich structure (13e) for Au₁₃ are characterized for the first time in this work.     

Influence of intermolecular hydrogen bonding on IR-spectroscopic properties of (R)-(−)-1-phenylglycinium hydrogen squarate monohydrate in solid-state. IR-LD, Raman spectroscopy and theoretical study

Influence of the intermolecular interactions in solid phase on the overlapped IR-spectroscopic pattern of (R)-(−)-1-phenylglycinium hydrogen squarate monohydrate is studied experimentally by means of a complex approach, including IR-LD spectroscopy of oriented solid-samples as suspension in nematic liquid crystal, reducing difference procedure for polarized spectra interpretation, deconvolution and curve-fitting procedures. Raman ones completes the IR-spectroscopic data. The experimental results are supported with theoretical ones and the calculated frequencies obtained on UHF/6-311++G^** level of theory and basis and scaled with a factor of 0.8929 correlated well with experimental observed data, giving a standard deviation of 9 cm⁻¹ for so-called non-characteristic bands.     

Description of the S1(ππ*) state and the reinterpretation of the (1+1) REMPI spectra of N-methylpyrrole as based on the ab intio calculation: a computational spectroscopy

The ab intio calculation was performed to establish the assignment of the title spectra by such as searching for stationary points belonging to lower excited states. The lowest excited state was confirmed to be of ππ* type with an A″ symmetry of a molecular point group C_s (against the previous assumption of πΣ* type) trapped in deep potential minima at the nonplanar staggered conformation (also against the current belief on the involvement of internal rotation). Thus, lower ‘vibrational’ levels in the S₁ state were shown to be tunnel-split levels with various symmetry species for a molecular symmetry group G₁₂. Based on this finding, the spectral data as reported by Philis [Chem. Phys. Lett. 353 (2002) 84] were reassigned while applying the formalism as will be presented in Appendix A.     

Electronic spectra of the linear magnesium-containing carbon chains MgC2nH (n = 1–5): A CASPT2 study

Complete active space self-consistent-field (CASSCF) approach has been used for the geometry optimization of the X²Σ⁺ and A²Π electronic states for the linear magnesium-containing carbon chains MgC_2nH (n = 1–5). Multireference second-order perturbation theory (CASPT2) has been used to calculate the vertical excitation energies from the ground to selected seven excited states, as well as the potential energy curves of two ²Σ⁺ and two ²Π electronic states. The studies indicate that the vertical excitation energies of the A²Π ← X²Σ⁺ transition for MgC_2nH (n = 1–5) are 2.837, 2.793, 2.767, 2.714, and 2.669 eV, respectively, showing remarkable linear size dependence. Compared with the previous TD-DFT and RCCSD(T) results, our estimates for MgC_2nH (n = 1–3) are in the best agreement with the available observed data of 2.83, 2.78, and 2.74 eV, respectively. In addition, the dissociation energies in MgC_2nH (n = 1–5) are also been evaluated.     

Pulsed‐laser–deposited and plasma‐polymerized polytetrafluoroethylene (PTFE)‐like thin films: A comparative study on PTFE‐specific properties

Glass‐like and structural first‐order phase transitions are investigated in polytetrafluoroethylene (PTFE) foils and PTFE‐like films prepared by pulsed‐laser deposition (PLD) and plasma polymerization (PP). A structural comparison of the investigated polymers is performed by infrared spectroscopy and dielectric dilatometry. It is shown that dielectric dilatometry (the measurement of the susceptance vs. temperature) provides a simple and elegant means for detecting volumetric transitions in thin nonpolar polymer films. In conventional PTFE foils, the known glass‐like and structural first‐order phase transitions are identified. The structure of pulsed‐laser deposited PTFE strongly depends on the target material, ranging from highly crystalline films showing only structural phase transitions to films strongly deviating from PTFE foils, with structural characteristics comparable to plasma‐polymerized fluorocarbons. The dielectric loss of the highly crystalline PLD films compares favorably with conventional PTFE foils, making the films attractive for new applications in miniature electret devices. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2115–2125, 1999     

Mechanisms for H2O decomposition on the Si(111)‐7 × 7 surface: A DFT cluster model study

The mechanisms for the complete decomposition of water molecules on the Si (111)‐7 × 7 surface were investigated theoretically. The reaction pathways for dissociation of four water molecules over the adatom and rest atom sites were calculated using the density functional theory (DFT) in conjunction with the B3LYP functional. The calculated results demonstrated that the initial O? H bond dissociation from the first H₂O to form the adsorbed OH species is more preferential on the adatom site (Si_a) than the rest atom site (Si_r) of Si (111)‐7 × 7. Four water molecules dissociate successively over the adatom site, backbonds of adatoms which are saturated by OH species can reasonably be the place of insertion of oxygen atoms, yielding a tetrahedral SiO₄ structure with one on top and three inserted oxygen atoms. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

Can BB double bond be as potential proton acceptor: A UB3LYP and UMP2 theoretical study on unusual intermolecular T-shaped XH…π interactions between the triplet state HBBH and HF, HCl, HCN or H2C2

The unusual weak T-shaped XH…π hydrogen bonds are found between the BB double bond of the triplet state HBBH and the acid hydrogen of HF, HCl, HCN and H₂C₂ using UMP2 and UB3LYP methods at 6-311++G(2df,2p) and aug-cc-pVTZ levels. The binding energies follow the order of HBBH…HF > HBBH…HCl > HBBH…HCN > HBBH…H₂C₂, and the hydrogen-bonded interactions in the triplet state complexes HBBH…HX (³B₁) are found to be weaker than those in HCCH…HX and OCBBCO…HX. The analyses of natural bond orbital (NBO) and the electron density shifts reveal that the nature of the T-shaped XH…π hydrogen-bonded interaction is that the lost density from the π-orbital of BB bond is shifted toward the hydrogen atom of HX, leading to the electron density accumulation and the formation of the hydrogen bond. The atoms in molecules (AIM) theory has been also applied to characterize bond critical points and confirm that it is difficult for the ground electronic state of HBBH to be as the hydrogen-bond proton acceptor, perhaps due to the nature of electron-deficient BB double bond.