Initiating ability of the peroxyacetates of secondary hydroperoxides

The kinetics of ethylbenzene oxidation in the presence of acetic anhydride, the kinetics of acetic anhydride reaction with cyclohexyl hydroperoxide, and the composition of the products of the above reactions were studied in order to evaluate the initiating abilities of 1-phenylethyl and cyclohexyl peroxyacetates generated in situ and to determine the directions of reactions. Anhydride additives significantly accelerated the oxidation of ethylbenzene and the degradation of cyclohexyl hydroperoxide with the predominant formation of corresponding ketones. It was found that the acceleration of ethylbenzene oxidation was due to the homolytic degradation of a peroxy ester, which results in the formation of methyl phenyl carbinol and benzaldehyde (ethylbenzene) or cyclohexanol (cyclohexyl hydroperoxide). The importance of the homolytic degradation of peroxy esters was evaluated using a mixed-initiation method (ethylbenzene) or by measuring the consumption of an inhibitor (cyclohexyl hydroperoxide).Translated from Kinetika i Kataliz, Vol. 45, No. 6, 2004, pp. 808–813.Original Russian Text Copyright © 2004 by Nosacheva, Voronina, Perkel.     

Photo-oxidation products of polyetherimide ULTEM determined by MALDI-TOF-MS. Kinetics and mechanisms

Poly 2,2-bis4-(3,4-dicarboxyphenoxy) phenylpropane dianhydride-1,3-phenylendiamine copolymer (ULTEM) was subjected to photo aging in the attempt to find evidence on the structure of the species formed in the oxidative degradation. The oxidation was followed as a function of the exposure time by MALDI and SEC/MALDI techniques. The SEC curves showed extensive degradation, with the formation of low molar mass oligomers having different end groups. Valuable structural information on the photo-oxidized ULTEM species was extracted from the MALDI spectra of the photo-oxidized ULTEM. These showed the presence of polymer chains containing acetophenone, phenyl acetic acid, phenols, benzoic acid, phthalic anhydride and phthalic acid end groups. The mechanisms accounting for the formation of photo-oxidation products involve several simultaneous reactions: (1) photo-cleavage of methyl groups of the N-methyl phthalimide terminal units; (2) photoxidative degradation of the isopropylidene bridge of BPA units; (3) photo-oxidation of phthalimide units to phthalic anhydride end groups: (4) hydrolysis of phthalic anhydride end groups. The kinetic behaviour of all the species detected is in agreement with the predictions of the reaction mechanisms hypothesized.     

Identification of electrical degradation products of 4-chlorophenol in water.

The electrical decomposition of 4-chlorophenol in water was examined with iridium dioxide doped on atitanium electrode. A number of electrical degradation products of 4-chlorophenol, such as hydroquinone and chlorohydroquinone via the addition of hydroxyl radicals, and dichlorophenol through addition of chlorine radical, were observed as major products. Moreover, hydroxylated chlorobiphenylethers, hydroxylated dibenzo-p-dioxin/furans and hydroxylated chlorobiphenyls formed by a dimerization process during the electrolysis process of 4-chlorophenol were also observed. On the other hand, benzoquinone, muconic acid and aldehyde derivatives that were further oxidative products of hydroquinone formed by photocatalysis process, were not observed. The electrical decomposition products of 4-chlorophenol were trimethylsilylated and then identified by gas chromatography-mass spectrometry. The degradation rate of 4-chlorophenol in water by iridium oxide electrode was measured against the electrical process duration. After iridium electrical process for 120 min, about 50% of 4-chlorophenol was converted into a number of products through oxidation processes. On the basis of the identified products, the degradation pathways of 4-chlorophenol under electrolysis process were proposed.     

Thermal characterization and thermal degradation of poly(norbornene-2,3-dicarboxylic acid dialkyl esters) synthesized by vinyl addition polymerization

The thermal properties and degradation behaviors of poly(norbornene-2,3-dicarboxylic acid dialkyl esters) (PNB-dialkyl esters) (alkyl = Me (PNB-Me), Et (PNB-Et), Pr (PNB-Pr), and Bu (PNB-Bu)) were investigated by thermogravimetric analysis (TGA) in dynamic conditions and by infrared (IR) spectroscopy. The PNB-dialkyl esters show good thermal stability up to 350 °C, and the thermal stability decreases in the order Me > Et > Pr > Bu with the increase in size of side chain. The effect of side-chain size on the thermal degradation behaviors of PNB-dialkyl esters is evidenced by one-step thermal degradation profile for PNB-Me while two-step thermal degradation profile for PNB-Et, PNB-Pr, and PNB-Bu. Transformation is deduced to undergo β-hydrogen elimination and formation of anhydride group in the first stage of thermal degradation reaction according to TGA and IR results for PNB-Et, PNB-Pr, and PNB-Bu. The apparent activation energy and thermal degradation model of PNB-dialkyl esters are estimated by means of Ozawa-Flynn-wall method and Phadnis-Deshpande method, respectively.     

Mechanism of phthalic anhydride formation in the oxidation of n-pentane on a vanadium-phosphorus oxide catalyst

The reaction paths of product formation in the partial oxidation of n-pentane on vanadium-phosphorus oxide (VPO) and VPO-Bi catalysts are considered. The condensed products of n-pentane oxidation were analyzed by chromatography-mass spectrometry, and the presence of C₄ rather than C₅ unsaturated hydrocarbons was detected. It was found that the concentration of phthalic anhydride in the products increased upon the addition of C₄ olefins and butadiene to the n-pentane-air reaction mixture. With the use of a system with two in-series reactors, it was found that the addition of butadiene to a flow of n-butane oxidation products (maleic anhydride, CO, and CO₂) resulted in the formation of phthalic anhydride. The oxidation of 1-butanol was studied, and butene and butadiene were found to be the primary products of reaction; at a higher temperature, maleic anhydride and then phthalic anhydride were formed. The experimental results supported the reaction scheme according to which the activation of n-pentane occurred with the elimination of a methyl group and the formation of C₄ unsaturated hydrocarbons. The oxidation of these latter led to the formation of maleic anhydride. The Diels-Alder reaction between maleic anhydride and C₄ unsaturated hydrocarbons is the main path of phthalic anhydride formation.     

Degradation of 4-Chlorophenol using a Gas–Liquid Gliding Arc Discharge Plasma Reactor

The gas–liquid gliding arc discharge plasma is used directly to study degradation and dechlorination of 4-Chlorophenol (4-CP) in solution. The typical AC waveforms of discharge voltage and current revealed that the discharge behavior was not definitely periodic. The chemical oxygen demand (COD) abatement of 4-CP solution with stainless steel electrode is higher than that with aluminum or brass electrode; When air was used as carrier gas the COD abated from 1,679.2 to 190 mg/L (i.e., 88.68% abatement) after 76 min plasma treatment; Increasing gas–liquid mixing rate could also increase the degradation of 4-CP; adding appropriate amounts of Fe²⁺ or iron chips to the solution were found to be favorable for 4-CP degradation. The main intermediates of 4-CP degradation are p-benzoquinone, hydroquinone, 4-chlorocatechol, p-chloronitrobenzene, and ring cleavage products (acetic acid, glycol, propanone, and others). Furthermore, possible pathways of 4-CP degradation in solution are proposed.     

Thermal degradation of ammonium polymethacrylate and polymethacrylamide

The degradation of ammonium polymethacrylate and polymethacrylamide has been studied by a combination of thermal analysis methods (TVA and TG) and examination of volatile and involatile products by infrared analysis. It is shown that total reaction comprises an initial cyclization and further fragmentation of the modified chain at higher temperatures to yield gaseous volatiles. The partially degraded NH₄PMA contains anhydride ring and cyclic imide structures in the chain. Quantitative comparison of yields of isocyanic acid and carbon dioxide has shown that imidization is the major reaction and anhydride formation is of less importance. The mechanisms of the various reactions are discussed.     

An effective method for the synthesis of carboxylic esters and lactones using substituted benzoic anhydrides with Lewis acid catalysts

An efficient mixed-anhydride method for the synthesis of carboxylic esters and lactones using benzoic anhydride having electron withdrawing substituent(s) is developed by the promotion of Lewis acid catalysts. In the presence of a catalytic amount of TiCl₂(ClO₄)₂, various carboxylic esters are prepared in high yields through the formation of the corresponding mixed-anhydrides from 3,5-bis(trifluoromethyl)benzoic anhydride and carboxylic acids. The combined catalyst consisting of TiCl₂(ClO₄)₂ together with chlorotrimethylsilane functions as an effective catalyst for the synthesis of carboxylic esters from free carboxylic acids and alcohols with 4-(trifluoromethyl)benzoic anhydride. Various macrolactones are prepared from the free ω-hydroxycarboxylic acids by the combined use of 4-(trifluoromethyl)benzoic anhydride and titanium(IV) catalysts together with chlorotrimethylsilane under mild reaction conditions. The lactonization of trimethylsilyl ω-(trimethylsiloxy)carboxylates using 4-(trifluoromethyl)benzoic anhydride is also promoted at room temperature in the presence of a catalytic amount of TiCl₂(ClO₄)₂. An 8-membered ring lactone, a synthetic intermediate of cephalosporolide D, is successfully synthesized according to this mixed-anhydride method using 4-(trifluoromethyl)benzoic anhydride by the promotion of a catalytic amount of Hf(OTf)₄.     

Novel Grignard reaction of chelated boric esters derived from diethyl (2R,3R)-tartrate: a one-step access to a bulky γ,γ,γ-trisubstituted γ-hydroxy-β-ketoester via selective arylation and sequent deboronation

Reaction of the tetracoordinated spiroborate esters derived from diethyl (2R,3R)-tartrate with Grignard reagents was further examined and found that sterically hindered MesMgBr has different reaction behavior from PhMgBr to the spiroborate esters. It has been proved that in the case of PhMgBr reaction, the formation of the chiral bicyclodiboronic ester (R,R)-2 was accomplished step by step via two 1,3-cyclizations of the hydrolytic products of the resulting boron compound. However, in the case of MesMgBr reaction, only one esteral group of the tartrate moiety was diarylated, and a bulky γ,γ,γ-trisubstituted γ-hydroxy-β-ketoester and mesitylboronic anhydride were provided after the resultant was worked up. The composition and structure of the products were authorized by the spectral and single crystal X-ray analysis. A formation mechanism of γ-hydroxy-β-ketoester and mesitylboronic anhydride was also suggested.     

Esters of pyromellitic acid. Part I. Esters of achiral alcohols: regioselective synthesis of partial and mixed pyromellitate esters, mechanism of transesterification in the quantitative esterification of the pyromellitate system using orthoformate esters, and a facile synthesis of the ortho pyromellitate diester substitution pattern

Mild conditions and reversible anhydride formation allow a relative differentiation to be made of the four equivalent carbonyl groups of pyromellitic dianhydride (PMDA, benzene-1,2,4,5-tetracarboxylic dianhydride) in esterification, leading to regioselective methods to generate a wide range of partially or totally esterified products or products bearing differing esterifying groups at the different positions. Pyromellitate monoester anhydrides form efficiently in dichloromethane/triethylamine from 1 equiv of the alcohol. Under the same conditions, two different alcohols can be made to react sequentially. With 2 equiv of an alcohol, the usual mixture of meta and para diesters is obtained, separated by crystallization from HOAc. Meta and para dibenzyl pyromellitates served as regiospecific sources of other diesters, by further esterification followed by hydrogenolysis. Refluxing orthoformate triesters were found to effect quantitative esterification of the pyromellitate system under autocatalytic conditions; minor ester exchange with pre-existing esters (0-5% of total product) was ascribed to reversible anhydride formation. For general esterification with alcohols, partial ester acid chlorides were obtained using oxalyl chloride. Pyromellitate triesters afforded the ortho diester anhydrides upon distillation, thereby providing facile entry into the mostly novel ortho substitution pattern in this system. The requisite triesters were prepared by selective saponification or by the prior incorporation of one benzyl ester substituent, which could be removed by catalytic hydrogenolysis. The various benzyl esters of pyromellitates hydrogenolyzed smoothly to release the carboxylic acid groups without disturbance of pyromellitate aromaticity.     

2,4-二氯苯氧基乙酸的光转化化学发光机理研究

实验发现,2,4-二氯苯氧基乙酸(2,4-D)经紫外光转化后与KMnO4在H2SO4介质中反应可产生化学发光。采用液相色谱-质谱联用技术(LC-MS)对2,4-D光降解产物进行分析,推断光降解主要生成了多酚类降解产物,如2-氯对苯二酚(CHQ)和4-氯邻苯二酚等。化学发光光谱研究发现,2,4-D经紫外光转化后,与KMnO4反应的发光波长为690 nm,与2,4-D的典型降解产物CHQ的化学发光光谱一致。此发光现象是氧化还原过程中生成的Mn?吸收反应所释放出的化学能成为激发态,再返回基态时产生的特征辐射峰。该反应体系可用于2,4-D的检测,当2,4-D浓度在0.01～10 mg/L范围内与发光强度呈良好的线性关系;检出限为3.0μg/L。     

Synthesis,characterization, and thermal properties of new flavor compounds

Synthesis, characterization, and thermal properties of new, flavor, long chain esters were presented. The new compounds were obtained in the catalytic esterification process of a stoichiometric ratio of trans-3,7-dimethyl-2,6-octadien-1-ol, succinic anhydride, and aliphatic chain diol. As diols ethylene glycol, 1,4-buthylene glycol, 1,5-pentylene glycol, and 1,6-hexylene glycol were applied. The spectroscopic analyses completely confirmed that the applied synthesis conditions allowed obtaining the new compounds with high yield and purity. Their thermal properties were studied in inert and oxidative atmospheres. The esters were less thermally stable in inert (IDT 186–195 °C) than in oxidative (IDT 210–228 °C) atmosphere. Two, non-completely divided decomposition steps were visible during their pyrolysis. In contrast, the new, long chain compounds decompose in three major steps in air. The analyses of the volatile products emitted during their pyrolysis indicated on the asymmetrical disrupt of their bonds. The formation of acyclic and alicyclic monoterpene hydrocarbons, succinic anhydride, diols, alcohols, alkenes, and water was observed. It indicated mainly on the β-elimination reactions during their pyrolysis. Also, β-elimination reactions of esters are mainly expected in air. Initially, it resulted in the formation of acyclic and alicyclic monoterpene hydrocarbons, hydroxyl compounds (diols, alcohols), and its β-elimination products: aldehydes, alkenes, and water. However, the presence of oxygen in the medium causes the partial decarboxylation and oxygenation of aldehydes and thus the formation of alkenes and carbon dioxide. In addition, the beginning of evaporation of succinic anhydride was detected at T _max1. At T _max2 the evaporation of succinic anhydride, their partial decarboxylation to CO₂, the small amounts of diols, alcohols, and aldehyde fragments were indicated. Finally, succinic anhydride, water, and carbon dioxide were only observed during decomposition of studied esters in air.     

Thieno[2,3-d]pyrimidines. I. A new method for the preparation of esters and amides of thieno[2,3-d] pyrimidine-6-carboxylic acids

A novel method for the preparation of esters and amides of thieno[2,3-d]pyrimidine-6-carb-oxylic acids was described. A typical example was the direct formation of ethyl 5-amino-2-methylthiothieno[2,3-d]pyrimidine-6-earboxylate(IIIa) from 4-chloro-2-methylthio-5-pyrimidine-carbonitrile (Ia) and ethyl mercaptoacetate in refluxing ethanol containing sodium carbonate. Displacement of the methylthio group in IIIa by various amines gave the corresponding amino derivatives. The reactions of IIIa and related compounds with acetylating agents such as acetic anhydride or chloroacetyl chloride gave various products. Treatment of 5-carbethoxy-4-chloro-2-phenylpyrimidine(IV) with methyl mercaptoacetate afforded the dechloro intermediate diester Va, which cyclized on reaction with sodium ethoxide to form methyl 5-hydroxy-2-phenylthieno-[2,3-d]pyrimidine-6-carboxylate (Vla). The synthesis was expanded to include the preparation of various new 2,4,5-trisubstituted thieno[2,3-d]pyrimidine-6-carboxylic acid esters and amides (Charts I-V).     

Thermal degradation of phenyl methacrylate-methyl methacrylate copolymers

The degradation behaviours of poly(phenyl methacrylate), four phenyl methacrylate-methyl methacrylate copolymers which span the composition range, and poly(methyl methacrylate) have been compared by using thermogravimetry in dynamic nitrogen and thermal volatilisation analysis (TVA) under vacuum, with programmed heating at 10°C/min. Volatile products have been separated by subambient TVA and identified and the cold ring fraction and partially degraded polymer have been examined by ir spectroscopy. Poly(phenyl methacrylate) resembles poly(methyl methacrylate) in degrading completely to monomer. Copolymers of phenyl methacrylate and methyl methacrylate are more stable than the homopolymers. On degradation, the major products are the two monomers. Minor products from all the copolymers include carbon dioxide, dimethylketene, isobutene and formaldehyde. Copolymers with low and moderate phenyl methacrylate contents show the formation of anhydride ring structures in the cold ring fraction and partially degraded copolymer, together with small amounts of methanol in the volatile products. Carbon dioxide is a more significant product at lower phenyl methacrylate contents.The mechanism of degradation is discussed.     

Pyrolysis studies on polyalkylene phthalates

The synthesis and identification of pyrolysis products of five polyalkylene phthalates are reported. The pyrolysis products are separated in a capillary gas chromatograph and the products are identified using a mass selective detector. The major degradation products for the polyesters now investigated are phthalic anhydride and the appropriate diol. In nearly all the polyesters studied, cyclic ether from the diol and the cyclic diester formed from phthalic anhydride and the diol are detected. A wide variety of low molecular weight compounds and considerable quantities of complex mono- and diesters of phthalic acid are identified among the pyrolysis products. The mode of formation of the products identified by GC/MS analysis are discussed with reference to the general polyester degradation mechanism.     

On the Diels-Alder reactions of pentadienyl maleates and citraconates

Reactions between conjugated dienols and maleic anhydride provide either cis-fused or trans-fused bicyclic products as major products, depending upon how the reaction is carried out. Simply mixing the two reactants together generally leads to cis-fused lactone acids in thermal reactions which proceed viaintermolecular Diels-Alder reaction followed by intramolecular esterification. Pre-forming the maleate half ester derivative followed by heating affords predominantly trans-fused lactone acids in good yields by way of an intramolecular Diels-Alder (IMDA) reaction. Sorbyl citraconate half esters undergo a rapid thermolytic fragmentation in refluxing toluene to form the dienol and citraconic anhydride. The resulting diene-dienophile pair undergo an intermolecular cycloaddition followed by a rapid intramolecular esterification to give cis-fused bicyclic lactone acids as major products. The IMDA reaction of citraconic half esters is sufficiently rapid in DMSO to dominate over fragmentation: the exo-cycloadduct is formed almost exclusively. Nine literature reports of endo-selective IMDA reactions of triene acids are erroneous; the cycloadditions proceed in an intermolecular manner.     

Systemes de strecker et apparentes—XI : Formation et stabilité de l'α-carboxyaminonitrile.Intermédiaire essentiel dans la synthèse des hydantoïnes selon bucherer-bergs

The determination of the structure of the intermediate in the Bucherer-Bergs reaction (the transformation in aqueous solution of an aldehyde into the corresponding amino-acid via the hydantoin) showed that this reaction involved the formation of α-aminonitrile carbamate. The slow formation of the carbonic anhydride from the carbonate buffer limited the formation of that main intermediate which was in equilibrium with the α-aminonitrile. The variation of the stability of the carbamate vs pH is mainly determined by the concentration of CO₂ dissolved in the mixture, but also by the equilibrated formation of products formed by the degradation of α-aminonitrile, i.e. the aminodinitrile and the cyanohydrin.     

The first asymmetric esterification of free carboxylic acids with racemic alcohols using benzoic anhydrides and tetramisole derivatives: an application to the kinetic resolution of secondary benzylic alcohols

A variety of optically active carboxylic esters are produced by the kinetic resolution of racemic secondary benzylic alcohols using free carboxylic acids with benzoic anhydride and tetramisole derivatives. 4-Methoxybenzoic anhydride (PMBA) is the best reagent to use in producing the corresponding esters in high ee when the reaction is catalyzed by (+)-benzotetramisole (BTM); by contrast, when non-substituted benzoic anhydride is used as a coupling reagent, the resulting optically active alcohols are obtained with high selectivities. This protocol directly produces chiral carboxylic esters from free carboxylic acids and racemic secondary alcohols by utilizing the trans-acylation process to generate mixed anhydrides from acid components and benzoic anhydride derivatives under the influence of chiral catalysts.     

Thermal degradation characteristics of a novel flame retardant coating using TG-IR technique

A novel phosphate acrylate monomer (TGMAP) has been synthesized by allowing phosphoric acid to react with glycidyl methacrylate. Its structure was characterized by Fourier transformed infrared spectroscopy (FTIR) and ¹H nuclear magnetic resonance spectroscopy (¹H NMR). The thermal degradation mechanism was characterized using thermogravimetric analysis/infrared spectrometry (TG-IR). The char yield was 36.3% at 600 °C. TG data indicate that the material undergoes degradation in three characteristic temperature stages, which can be attributed to the decomposition of the phosphate, thermal pyrolysis of aliphatic chains, and degradation of an unstable structure in char, respectively. The volatilized products formed on thermal degradation of TGMAP indicated that the volatilized products are CO, CO₂, carboxylic acid, acid anhydride, water, alkane, and aromatic compounds according to the temperature of onset formation.     

Efficient C–H activation of alkylbenzenes and methylcyclohexenes to benzyl esters by Pd(OAc)2/Sn(OAc)2 catalyst system

Selective activation of the side-chain C–H bond of alkylbenzenes and methylcyclohexenes is achieved by a Pd(OAc)₂/Sn(OAc)₂ catalyst system. Under an oxygen atmosphere, various benzyl esters were obtained from the substrates and carboxylic anhydrides. The esters were obtained in more than 100% yield based on the amount of benzoic anhydride, and consumption of oxygen was observed. This suggests that oxygen may be incorporated to produce two moles of the benzoxyl group from one mole of benzoic anhydride. It is interesting that either 1-, 3- or 4-methylcyclohexene reacted with benzoic anhydride to give benzyl benzoate. These carboxylations proceeded at the side-chain alkyl group with high selectivity and no ring-carboxylated product or coupling product was detected. From these results, a mechanism involving the formation of a η³-benzylpalladium complex was proposed. © 1997 John Wiley & Sons, Ltd.