4,5-Dicyano-1,2,3-Triazole—A Promising Precursor for a New Family of Energetic Compounds and Its Nitrogen-Rich Derivatives: Synthesis and Crystal Structures

The nitrogen-rich compounds and intermediates with structure of monocyclic, bicyclic, and fused rings based on 1,2,3-triazole were synthesized and prepared by using a promising precursor named 4,5-dicyano-1,2,3-triazole, which was obtained by the cyclization reaction of diaminomaleonitrile. Their structure and configurational integrity were assessed by Fourier transform-infrared spectroscopy (FT-IR), mass spectrometry (MS), and elemental analysis (EA). Additionally, fourteen compounds were further confirmed by X-ray single crystal diffraction. Meanwhile, the physical properties of four selected compounds (3·H₂O, 6·H₂O, 10·H₂O, and 16) including thermal stability, detonation parameters, and sensitivity were also estimated. All these compounds could be considered to construct more abundant 1,2,3-triazole-based neutral energetic molecules, salts, and complex compounds, which need to continue study in the future in the field of energetic materials.     

Thermal behavior of 1,2,3-triazole nitrate

The thermal decomposition behaviors of 1,2,3-triazole nitrate were studied using a Calvet Microcalorimeter at four different heating rates. Its apparent activation energy and pre-exponential factor of exothermic decomposition reaction are 133.77 kJ mol⁻¹ and 10^14.58 s⁻¹, respectively. The critical temperature of thermal explosion is 374.97 K. The entropy of activation (ΔS ^≠), the enthalpy of activation (ΔH ^≠), and the free energy of activation (ΔG ^≠) of the decomposition reaction are 23.88 J mol⁻¹ K⁻¹, 130.62 kJ mol⁻¹, and 121.55 kJ mol⁻¹, respectively. The self-accelerating decomposition temperature (T _SADT) is 368.65 K. The specific heat capacity was determined by a Micro-DSC method and a theoretical calculation method. Specific heat capacity equation is C_\textp ( \textJ mol ^{- 1} \text K ^{- 1} ) = - 42.6218 + 0.6807T C_{\text{p}} \left( {{\text{J mol}}^{ - 1} {\text{ K}}^{ - 1} } \right) = - 42.6218 + 0.6807T (283.1 K < T < 353.2 K). The adiabatic time-to-explosion is calculated to be a certain value between 98.82 and 100.00 s. The critical temperature of hot-spot initiation is 637.14 K, and the characteristic drop height of impact sensitivity (H ₅₀) is 9.16 cm.     

Preparation and characterization of nitrogen-rich bis-1-methylimidazole1H,1′H-5,5′-bistetrazole-1,1′-diolate energetic salt

A new nitrogen-rich energetic salt of bis-1-methylimidazole 1H,1′H-5,5′-bistetrazole-1,1′-diolate salt, (1-M)₂BTO, was synthesized and characterized (FT-IR, ¹H NMR, ¹³C NMR, elemental analysis, and X-ray single-crystal diffraction). Results indicated that (1-M)₂BTO crystallizes in the triclinic space group P-1. The thermal decomposition behavior of (1-M)₂BTO was determined by differential scanning calorimetry (DSC) and thermogravimetric tandem infrared spectroscopy. The decomposition peak temperature of (1-M)₂BTO was 530 K, which suggested that the salt is strong heat resistance. The apparent activation energies were 130.56 kJ mol^?1 (Kissinger’s method) and 132.50 kJ mol^?1 (Ozawa’s method), respectively. The enthalpy of formation for the salt was calculated as 917.3 kJ mol^?1. The detonation velocity and detonation pressure of (1-M)₂BTO were 7448 m s^?1 and 20.7 GPa, respectively, using the Kamlet-Jacobs equation. Furthermore, the sensitivity test results showed that its impact sensitivity is greater than 50 J and friction sensitivity is 180 N, indicating that it has a lower sensitivity.

     

Thermal behavior of 3,4,5-triamino-1,2,4-triazole dinitramide

The thermal decomposition behavior of 3,4,5-triamino-1,2,4-triazole dinitramide was measured using a C-500 type Calvet microcalorimeter at four different temperatures under atmospheric pressure. The apparent activation energy and pre-exponential factor of the exothermic decomposition reaction are 165.57 kJ mol⁻¹ and 10^18.04 s⁻¹, respectively. The critical temperature of thermal explosion is 431.71 K. The entropy of activation (ΔS ^≠), enthalpy of activation (ΔH ^≠), and free energy of activation (ΔG ^≠) are 97.19 J mol⁻¹ K⁻¹, 161.90 kJ mol⁻¹, and 118.98 kJ mol⁻¹, respectively. The self-accelerating decomposition temperature (T _SADT) is 422.28 K. The specific heat capacity of 3,4,5-triamino-1,2,4-triazole dinitramide was determined with a micro-DSC method and a theoretical calculation method. Specific heat capacity (J g⁻¹ K⁻¹) equation is C _p = 0.252 + 3.131 × 10⁻³  T (283.1 K < T < 353.2 K). The molar heat capacity of 3,4,5-triamino-1,2,4-triazole dinitramide is 264.52 J mol⁻¹ K⁻¹ at 298.15 K. The adiabatic time-to-explosion of 3,4,5-triamino-1,2,4-triazole dinitramide is calculated to be a certain value between 123.36 and 128.56 s.     

Reactions of 1,2,3-Triazoles with Trifluoromethanesulfonyl Chloride and Trifluoromethanesulfonic Anhydride

Reactions of 4,5-dibromo-1,2,3-triazole, 1H-1,2,3-benzotriazole, and 2-phenyl-2H-1,2,3-triazole-4-carbonyl chloride with trifluoromethanesulfonyl chloride and trifluoromethanesulfonic anhydride were studied. 4,5-Dibromo-1,2,3-triazole sodium salt reacted with CF₃SO₂Cl in tetrahydrofuran to give 4,5-dibromo-2-(2-tetrahydrofuryl)-2H-1,2,3-triazole rather than expected 4,5-dibromo-2-trifluoromethylsulfonyl-2H-1,2,3-triazole. The latter was synthesized by treatment of 4,5-dibromo-1,2,3-triazole sodium salt with trifluoromethanesulfonic anhydride. The reaction of benzotriazole with (CF₃SO₂)₂O afforded 1-trifluoromethylsulfonyl-1H-1,2,3-benzotriazole and 1,2,3-benzotriazolium trifluoromethanesulfonate. 2-Phenyl-2H-1,2,3-triazole-4-carbonyl chloride reacted with trifluoromethanesulfonamide sodium salt in DMF, yielding N-(dimethylaminomethylene)trifluoromethanesulfonamide. Possible ways for formation of the unexpected products were proposed.     

A variable temperature 1H NMR and DFT study of procyanidin B2 conformational interchange

Two procyanidin B2 conformers were identified in a relative abundance ratio of approximately 3:1 at 298 K by ¹H NMR experiments in acetonitrile. The conformational interchange reactions between these two conformers are 1st order in both reactions, with ?G^? for forward and reverse of 57.12?±?5.62 and 54.56?±?5.48 kJ mol^?1, respectively. The experimentally obtained standard thermodynamic energies for this reaction are ΔH⁰_rxn (3.67?±?0.22 kJ mol^?1), ΔS⁰_rxn (4.05?±?1.57 kJ mol^?1 K^?1), and ΔH⁰_rxn (2.96?±?0.33 kJ.mol^?1). Conformational search results at the DFT (PBE, PBE-D2, and B3LYP with 6-311++g**) level of theory yielded four novel conformations, named fully compact (FC), partially compact (PC), partially extended (PE), and fully extended (FE). Although the FC conformer is electronically the most stable of the four as a result of extensive intramolecular non-covalent interactions, the PC and FE conformers are thermodynamically favored in a 5:1 ratio (B3LYP), with the FC and PE conformers present in negligible amounts at equilibrium. The DFT computed standard reaction energies using the B3LYP functional for the PC_major to FE_minor conformational interchange reaction compare exceptionally well with experimental data at 298 K: ?G⁰_rxn (3.86 kJ mol^?1), ΔH⁰_rxn (5.34 kJ mol^?1), and ?S⁰_rxn (4.97 kJ mol^?1 K^?1). It was found that inclusion of solvation energies is crucial to obtain accurate thermodynamic energies. The secondary equilibria found in chromatographic separations are predicted to be highly dependent on solvent polarity and temperature. Similar conformational diversity and hierarchies should exist for all non-rigid procyanidin oligomers and the unique chromatographic behavior of these compounds may be a result of conformational interchange.

     

Calorimetric determination of enthalpy changes for the proton ionization of N-tris(hydroxymethyl)methyl-4-aminobutanesulfonic acid (TABS), N-tris(hydroxymethyl)methyl-3-aminopropanesulfonic acid (TAPS) and 3-[N-tris(hydroxymethyl)methylamino]-2-hyroxypropane sulfonic acid (TAPSO) in water–methanol mixtures

Enthalpies for the two proton ionizations of the biochemical buffers N-tris(hydroxymethyl)methyl-4-aminobutanesulfonic acid (TABS), N-tris(hydroxymethyl)methyl-3-aminopropanesulfonic acid (TAPS) and 3-[N-tris(hydroxymethyl)methylamino]-2-hyroxypropane sulfonic acid (TAPSO) were obtained in water–methanol mixtures with methanol mole fraction (X_m) from 0 to 0.360. The ionization enthalpy for the first proton (ΔH₁) of all three buffers was small and exhibited slight changes upon methanol addition. The ionization enthalpy of the second proton (ΔH₂) of TABS increased from 39.6 to 49.8 kJ mol⁻¹ and for TAPS from 40.1 to 43.2 kJ mol⁻¹, with a minimum of 38.2 kJ mol⁻¹ at X_m = 0.059. For TAPSO the increase was from 33.1 to 35.6 kJ mol⁻¹ at X_m = 0.194, with measurements at higher X_m precluded by low solubility of TAPSO in methanol rich solvents. The solvent composition was selected so as to include the region of maximum structure enhancement of water by methanol. The results were interpreted in terms of solvent–solvent and solvent–solute interactions.     

Pyrolysis and photolysis of 1-aroylamino-4,5-diaryl-1,2,3-triazoles: Generation and thermal transformations of 4,5-diaryl-1,2,3-triazolyl radicals

The pyrolysis of 1-aroylamino-4,5-diphenyl-1,2,3-triazoles 1 yields, pressumably via the 4,5-diphenyl-1,2,3-triazolyl radical ( 2a ), 2,3-diphenyl-2H-azirine ( 11a ) and 2-aryl-4,5-diphenylimidazoles 14 as the major products. Upon irradiation 1-benzoylamino-4,5-diphenyl-1,2,3-triazole ( 1a ) gives 4,5-diphenyl-1 (2)H-1,2,3-triazole ( 4a ) via the 1,2,3-triazolyl radical 2a , together with benzamide ( 5a ) and 1,2-bisbenzoylhydrazine ( 6a ). Products 5a and 6a result from the benzoylamino radical 3a by hydrogen atom abstraction and dimerization respectively.     

Investigation of isothermal and dynamic cure kinetics of epoxy resin/nadic methyl anhydride/dicyandiamide by differential scanning calorimetry (DSC)

Isothermal and dynamic differential scanning calorimetry (DSC) was exploited to study the curing behavior of diglycidyl ether bisphenol-A epoxy resin with various combining ratios of dicyandiamide (DICY) and nadic methyl anhydride (NMA). Curves of prepared samples indicated that the enthalpy of the reaction decreased with increasing the molar ratios (NMA/DICY) up to 40% after which an exothermic peak peculiar to the effect of anhydride appeared at a higher temperature. The curing behavior examination of the samples containing the aforementioned molar ratio of NMA/DICY (= 40%) was carried out using isothermal condition at different temperatures (130–145 °C) and dynamic condition DSC at various heating rates (2.5–20 °C min⁻¹). Under the isothermal condition, by constructing a master curve, the values of activation energy (E_a) and pre-exponential factor (A) were calculated 89.3 kJ mol⁻¹ and 1.2 × 10⁺⁹ s⁻¹, respectively. The activation energy of the curing reactions in a dynamic mode was obtained 85.32 kJ mol⁻¹ and 88.02 kJ mol⁻¹ using Kissinger and Ozawa methods, respectively. Likewise, pre-exponential factors were also calculated 3.35 × 10⁺⁸ and 7.4 × 10 ⁺⁸ s⁻¹, respectively. The overall order of reaction for both conditions was found to be a value around 3.

     

How reliable is DFT in predicting relative energies of polycyclic aromatic hydrocarbon isomers? comparison of functionals from different rungs of jacob's ladder

Density functional theory (DFT) is the only quantum‐chemical avenue for calculating thermochemical/kinetic properties of large polycyclic aromatic hydrocarbons (PAHs) such as graphene nanoflakes. Using CCSD(T)/CBS PAH isomerization energies, we find that all generalized gradient approximation (GGA) and meta GGA DFT functionals have severe difficulties in describing isomerization energies in PAHs. The poor performance of these functionals is demonstrated by the following root‐mean‐square deviations (RMSDs) obtained for a database of C₁₄H₁₀ and C₁₈H₁₂ isomerization energies. The RMSDs for the GGAs range between 6.0 (BP86‐D3) and 23.0 (SOGGA11) and for the meta GGAs they range between 3.5 (MN12‐L) and 11.9 (τ‐HCTH) kJ mol⁻¹. These functionals (including the dispersion‐corrected methods) systematically and significantly underestimate the isomerization energies. A consequence of this behavior is that they all predict that chrysene (rather than triphenylene) is the most stable C₁₈H₁₂ isomer. A general improvement in performance is observed along the rungs of Jacob's Ladder; however, only a handful of functionals from rung four give good performance for PAH isomerization energies. These include functionals with high percentages (40–50%) of exact Hartree–Fock exchange such as the hybrid GGA SOGGA11‐X (RMSD = 1.7 kJ mol⁻¹) and the hybrid‐meta GGA BMK (RMSD = 1.3 kJ mol⁻¹). Alternatively, the inclusion of lower percentages (20–30%) of exact exchange in conjunction with an empirical dispersion correction results in good performance. For example, the hybrid GGA PBE0‐D3 attains an RMSD of 1.5 kJ mol⁻¹, and the hybrid‐meta GGAs PW6B95‐D3 and B1B95‐D3 result in RMSDs below 1 kJ mol⁻¹. © 2016 Wiley Periodicals, Inc.     

Crystallization kinetics study of melt-spun Zr66.7Ni33.3 amorphous alloy by electrical resistivity measurements

In this paper, the electronic transport properties of as-spun Zr_66.7Ni_33.3 alloys were studied in detail by a combination of electrical resistivity and absolute thermoelectric power measurements over a temperature range from 25 up to 400 °C. Moreover, the isochronal and isothermal crystallization kinetics of Zr_66.7Ni_33.3 glassy alloy has been investigated based on the electrical resistivity measurements. The comparative study of the crystallization kinetics of these binary amorphous alloys was carried out, for the first time to our knowledge, using an accurate method for electrical resistivity measurements. In the isochronal heating process, the apparent activation energy for crystallization was determined to be, respectively, 371.4 kJ mol⁻¹ and 382.2 kJ mol⁻¹, by means of Kissinger and Ozawa methods. The Johnson–Mehl–Avrami model was used to describe the isothermal transformation kinetics, and the local Avrami exponent has been determined in the range from 2.97 to 3.23 with an average value of 3.1, implying a mainly diffusion-controlled three-dimensional growth with an increasing nucleation rate. Based on an Arrhenius relationship, the local activation energy was analyzed, which yields an average value E_x = 376.2 kJ mol⁻¹.

     

Synthesis,spectroscopic, thermal and biological aspect of mixed ligand copper(II) complexes

Derivative of 8-hydroxyquinoline i.e. Clioquinol is well known for its antibiotic properties, drug design and coordinating ability towards metal ion such as Copper(II). The structure of mixed ligand complexes has been investigated using spectral, elemental and thermal analysis. In vitro anti microbial activity against four bacterial species were performed i.e. Escherichia coli, Pseudomonas aeruginosa, Serratia marcescens, Bacillus substilis and found that synthesized complexes (15–37 mm) were found to be significant potent compared to standard drugs (clioquinol i.e. 10–26 mm), parental ligands and metal salts employed for complexation. The kinetic parameters such as order of reaction (n = 0.96–1.49), and the energy of activation (E _a = 3.065–142.9 kJ mol⁻¹), have been calculated using Freeman–Carroll method. The range found for the pre-exponential factor (A), the activation entropy (S* = −91.03 to−102.6 JK⁻¹ mol⁻¹), the activation enthalpy (H* = 0.380–135.15 kJ mol⁻¹), and the free energy (G* = 33.52–222.4 kJ mol⁻¹) of activation reveals that the complexes are more stable. Order of stability of complexes were found to be [Cu(A⁴)(CQ)OH] · 4H₂O > [Cu(A³)(CQ)OH] · 5H₂O > [Cu(A¹)(CQ)OH] · H₂O > [Cu(A²)(CQ)OH] · 3H₂O     

Kinetic study on preparation of substoichiometric tungsten oxide WO2.72 via hydrogen reduction process

Controlling the conditions of the oxygen partial pressure and temperature to prepare the WO_2.72 (W₁₈O₄₉) via reduction was possible through thermodynamic consideration. WO_2.72 was synthesized via heating to 1073 K in 5% H₂–95% Ar mixture gas flow from ammonium tungstate which was prepared by hydrothermal process. With the reducing prolonging time, the products were changed from WO_2.72 to WO₂ and then metal W. Thermogravimetric (TG) analysis showed ammonium tungstate decomposed completely to WO₃ at 773 K. Isothermal reductions using TG analysis were carried out at 905 K, 925 K, 945 K and 973 K in 5% H₂–95% Ar mixture gas flow, respectively. The whole reduction from WO₃ to WO_2.72 divided into three parts: initial nucleation and growth stage, final interfacial reaction stage and intermediate stage, was controlled jointly by both mechanisms. Fitting results showed that the initial stage obey the one-dimensional Avrami–Erofeev equation, the apparent activation energy was 132.7 ± 1.1 kJ mol⁻¹ and the pre-exponent factor was 4.82 × 10⁵ min⁻¹; the final stage expressed by 2-dimensional interfacial reaction, the apparent activation energy was 144.0 ± 2.1 kJ mol⁻¹ and the pre-exponent factor was 3.20 × 10⁵ min⁻¹.

     

An examination of the vaporization enthalpies and vapor pressures of pyrazine, pyrimidine, pyridazine, and 1,3,5-triazine

The vaporization enthalpies and liquid vapor pressures from T = 298.15 K to T = 400 K of 1,3,5-triazine, pyrazine, pyrimidine, and pyridazine using pyridines and pyrazines as standards have been measured by correlation-gas chromatography. The vaporization enthalpies of 1,3,5-triazine (38.8 ± 1.9 kJ mol⁻¹) and pyrazine (40.5 ± 1.7 kJ mol⁻¹) obtained by these correlations are in good agreement with current literature values. The value obtained for pyrimidine (41.0 ± 1.9 kJ mol⁻¹) can be compared with a literature value of 50.0 kJ mol⁻¹. Combined with the condensed phase enthalpy of formation in the literature, this results in a gas-phase enthalpy of formation, Δ_f H _m (g, 298.15 K), of 187.6 ± 2.2 kJ mol⁻¹ for pyrimidine, compared to a value of 195.1 ± 2.1 calculated for pyrazine. Vapor pressures also obtained by correlation are used to predict boiling temperatures (BT). Good agreement with experimental BT (±4.2 K) including results for pyrimidine is observed for most compounds with the exception of the pyridazines. The results suggest that compounds containing one or two nitrogen atoms in the ring are suitable standards for correlating various heterocyclic compounds provided the nitrogen atoms are isolated from each other by carbon. Pyridazines do not appear to be evaluated correctly using pyridines and pyrazines as standards.     

Two novel algorithms for the thermogravimetric assessment of polymer degradation under non-isothermal conditions

Two novel algorithms are presented for processing thermogravimetric (TG) data obtained during the degradation of a polymer in a single step mechanism under non-isothermal conditions. The first algorithm assesses three characteristics computed from the TG profile against a theoretical data set, and identifies likely kinetic models to fit the experimental data. The second algorithm provides an iterative arithmetic method to extract the apparent activation energy, E_a, and Arrhenius A-factor, A, from TG data without simplifying assumptions. The algorithms are validated using model data and applied to data for the non-isothermal degradation of poly(ethylene adipate), poly(lactic acid) (PLA) and a food packaging PLA composite formulation containing kenaf, a natural fibre. The analysis of poly(ethylene adipate) produced E_a = 137 kJ mol⁻¹ and log₁₀A = 8.71 (first-order kinetic model). The kenaf fibre destabilizes PLA, lowering its E_a from 190 kJ mol⁻¹ to 150 kJ mol⁻¹ (contracting volume model).     

Preparation and characterization of novel organic chelating resin and its application in recovery of Zn(II) from aqueous solutions

An organic polymeric resin was synthesized by anchoring p ‐aminobenzoic acid onto macroporous chloromethylated polystyrene beads, and was used for Zn(II) removal from aqueous solutions. The resin exhibited an initially rapid adsorption property for Zn(II) with equilibrium time of 10 h and the maximum adsorption capability approached 184.5 mg g⁻¹. Optimum pH was 4.5. The mechanism of adsorption was investigated using kinetic, isotherm and thermodynamic models. The adsorption kinetic data were described well by a pseudo second‐order model with R ² of 0.997. There was a negative ΔG (−17.98 kJ mol⁻¹) and positive ΔH (13.58 kJ mol⁻¹). HCl solution (1.0 mol l⁻¹) could achieve an elution rate of 100%. The experimental data were well fitted by the Thomas model with R ² of 0.9826. Copyright © 2016 John Wiley & Sons, Ltd.     

Temperature dependence vapour pressure measurements of Mg(tmhd)2(tmeda) [(tmhd = 2,2,6,6-tetramethyl-3,5-heptanedione, tmeda = N,N,N′,N′-tetramethylethylenediamine]

The reaction between the magnesium β-diketonate complex Mg(tmhd)₂(H₂O)₂ and 1 equiv. of N,N,N′,N′-tetramethylethylenediamine (tmeda = Me₂NCH₂CH₂NMe₂) in hexane at room temperature yielded Mg(tmhd)₂(tmeda). The standard enthalpy of sublimation (83.2 ± 2.3 kJ mol⁻¹) and entropy of sublimation (263 ± 6.3 J mol⁻¹ K⁻¹) of Mg(tmhd)₂(tmeda) were obtained from the temperature dependence vapour pressure, determined by adopting a horizontal dual arm single furnace thermogravimetric analyser as a transpiration apparatus. From the observed melting point depression DTA, the standard enthalpy of fusion (58.3 ± 5.2 kJ mol⁻¹) was evaluated, using the ideal eutectic behaviour of Mg(tmhd)₂(tmeda) as a solvent with bis(2,4-pentanedionato)magnesium(II), Mg(acac)₂ as a non-volatile solute.     

Thermal behavior and thermal safety on 3,3-dinitroazetidinium salt of perchloric acid

3,3-Dinitroazetidinium (DNAZ) salt of perchloric acid (DNAZ·HClO₄) was prepared, it was characterized by the elemental analysis, IR, NMR, and a X-ray diffractometer. The thermal behavior and decomposition reaction kinetics of DNAZ·HClO₄ were investigated under a non-isothermal condition by DSC and TG/DTG techniques. The results show that the thermal decomposition process of DNAZ·HClO₄ has two mass loss stages. The kinetic model function in differential form, the value of apparent activation energy (E _a) and pre-exponential factor (A) of the exothermic decomposition reaction of DNAZ·HClO₄ are f(α) = (1 − α)⁻¹/2, 156.47 kJ mol⁻¹, and 10^15.12 s⁻¹, respectively. The critical temperature of thermal explosion is 188.5 °C. The values of ΔS ^≠, ΔH ^≠, and ΔG ^≠of this reaction are 42.26 J mol⁻¹ K⁻¹, 154.44 kJ mol⁻¹, and 135.42 kJ mol⁻¹, respectively. The specific heat capacity of DNAZ·HClO₄ was determined with a continuous C _p mode of microcalorimeter. Using the relationship between C _p and T and the thermal decomposition parameters, the time of the thermal decomposition from initiation to thermal explosion (adiabatic time-to-explosion) was evaluated as 14.2 s.     

Oxidation of Fursemide by Diperiodatocuprate(III) in Aqueous Alkaline Medium—a Kinetic Study

Fursemide is the chemical compound 4-chloro-2-(furan-2-ylmethylamino)-5-(aminosulfonyl) benzoic acid. It was oxidized by diperiodatocuprate(III) in alkali solutions, and the oxidation products were identified as furfuraldehyde and 2-amino-4-chloro-5-(aminosulfonyl) benzoic acid. The reaction kinetics were studied spectrophotometrically. The reaction was observed to be first order in [oxidant] and fractional order each in [fursemide] and [periodate], whereas added alkali retarded the rate of reaction. The reactive form of the oxidant was inferred to be [Cu(H₃IO₆)₂]⁻. A mechanism consistent with the experimental results was proposed, in which oxidant interacts with the substrate to give a complex as a pre-equilibrium state. This complex decomposed in a slow step to give a free radical that was further oxidized by reaction with another molecule of DPC to yield 2-amino-4-chloro-5-(aminosulfonyl) benzoic acid and furfuraldehyde in a fast step. This reaction was studied at 25, 30, 35, 40 and 45 °C, and the activation parameters E _a,ΔH ^#,ΔS ^# and ΔG ^# were determined to be 51 kJ⋅mol⁻¹,48.5 kJ⋅mol⁻¹,−63.5 J⋅K⁻¹⋅mol⁻¹ and 67 kJ⋅mol⁻¹, respectively. The value of log ₁₀ A was calculated to be 6.8.     

Vapor pressure, kinetics and enthalpy of sublimation of bis(2,2,6,6-tetramethyl-3,5-heptanedionato)copper(II)

The kinetics of sublimation of bis(2,2,6,6-tetramethyl-3,5-heptanedionato)copper(II), [Cu(tmhd)₂] was studied by non-isothermal and isothermal thermogravimetric (TG) methods. The non-isothermal sublimation activation energy values determined following the procedures of Friedman, Kissinger, and Flynn–Wall methods yielded 93 ± 5, 67 ± 2, and 73 ± 4 kJ mol⁻¹, respectively and the isothermal sublimation activation energy was found to be 97 ± 3 kJ mol⁻¹ over the temperature range of 375–435 K. The dynamic TG run proved the complex to be completely volatile and the equilibrium vapor pressure (p_e)_T of the complex over the temperature range of 375–435 K determined by a TG-based transpiration technique, yielded a value of 96 ± 2 kJ mol⁻¹ for its standard enthalpy of sublimation (Δ_subH°).