Performance evaluation of functionalized ordered mesoporous silica for VOCs adsorption by molecular dynamics simulation

Volatile organic compounds (VOCs) are growing pollutants now that cause the serious environmental pollution and threaten human health. The functionalized ordered mesoporous silica (FOMS) has attracted considerable attention in adsorbing VOCs. In this paper, the molecular dynamics simulation was used to simulate the adsorption performance of FOMS on VOCs (acetone, ethyl acetate and toluene). After simulating different pore sizes (2 nm, 3 nm and 4 nm) adsorption performances of ordered mesoporous silica (OMS) on VOCs, OMS with a pore size of 4 nm was selected to further study the influence of functional groups (vinyl, methyl, and phenyl). The following law was obtained: the saturated adsorption capacities of vinyl-functionalized OMS (V-FOMS) to acetone, ethyl acetate and toluene were 3.045 mmol.g^?1, 2.568 mmol.g^?1 and 1.976 mmol.g^?1 respectively; the saturated adsorption capacities of methyl-functionalized OMS (M-FOMS) to acetone, ethyl acetate and toluene were 2.798 mmol.g^?1, 2.312 mmol.g^?1 and 1.698 mmol.g^?1 respectively; the saturated adsorption capacities of phenyl-functionalized OMS (P-FOMS) to acetone, ethyl acetate and toluene were 2.124 mmol.g^?1, 1.941 mmol.g^?1 and 1.539 mmol.g^?1 respectively. These results show that the adsorption ability of FOMS for different adsorbates follows the sequence of acetone > ethyl acetate > toluene. Furthermore, the interaction between functional groups (vinyl, methyl and phenyl) in FOMS and VOCs was explored. It is found that the interaction between different functional groups and adsorbates is different (interaction energy effect). This interaction energy effect promotes FOMS to better adsorb VOCs. This work would provide fundamental understanding and guidance for the development of novel adsorption materials for the adsorption of VOCs.     

Preparation of boronic acid and carboxyl-modified molecularly imprinted polymer and application in a novel chromatography mediated hollow fiber membrane to selectively extract glucose from cellulose hydrolysis

A novel boronic acid and carboxyl-modified glucose molecularly imprinted polymer were prepared through suspension polymerization, which is based on 1.0 mmol glucose as a template, 1.2 mmol methacrylamidophenylboronic acid, and 6.8 mmol methacrylic acids as monomers, 19 mmol ethyleneglycol dimethacrylate, and 1 mmol methylene-bis-acrylamide as crosslinkers. The prepared glucose-molecularly imprinted polymer had a particle size of 25–70 μm, and was thermally stable below 215°C, with a specific surface area of 174.82 m^2/g and average pore size of 9.48 nm. The best selectivity between glucose and fructose was 2.71 and the maximum adsorption capacity of glucose- molecularly imprinted polymer was up to 236.32 mg^/g which was consistent with the Langmuir adsorption model. The similar adsorption abilities in six successive runs and the good desorption rate (99.4%) verified glucose-molecularly imprinted polymer could be reused. It was successfully used for extracting glucose from cellulose hydrolysis. The adsorption amount of glucose was 2.61 mg/mL and selectivity between glucose and xylose reached 4.12. A newly established chromatography (glucose-molecularly imprinted polymer) mediated hollow fiber membrane method in time separated pure glucose from cellulose hydrolysates on a large scale, and purified glucose solution with a concentration of 3.84 mg/mL was obtained, which offered a feasible way for the industrial production of glucose from cellulose hydrolysates.     

Influence of size and functionality of polymeric nanoparticles on the adsorption behavior of sodium dodecyl sulfate as detected by isothermal titration calorimetry

Isothermal titration calorimetry was used to monitor the adsorption of the surfactant sodium dodecylsulfate (SDS) on different sized pure and carboxy functionalized polystyrene nanoparticles prepared by the mini-emulsion process. The ITC experiment gives, additionally to the CMC values, information about the interaction of the surfactant molecules to the particle’s surface due to the particle surface properties. The adsorption heat depends on the chemical composition of the polymer as well on the particle size. It also provides information about the surface coverage with surfactant and the number of additional adsorbed molecules per particle until full coverage by surfactant is obtained. The surfactant adsorption increases from 0.3 molecules per nm² for 50 nm to 8.5 molecules per nm² for carboxy functionalized particles with diameters larger than 160 nm. The area A _Surf-dens after the adsorption process gives information about the packing density of surfactant molecules on the particles in dependence of carboxy groups: an increasing number of carboxylic groups decreases the area occupied per SDS molecule. The adsorption process was also monitored by zeta potential measurements, where an increasing potential during the adsorption was detected.     

Maleic anhydride incorporated onto cellulose and thermodynamics of cation-exchange process at the solid/liquid interface

This investigation explores the chemical modification of cellulose by using a quasi solvent-free procedure, in which the biopolymer was added to molten maleic anhydride, producing a mixture of maleated and fumarated celluloses. Using this pathway mainly surface modifications are observed and more than 2.82 ± 0.05 mmol of modifier per gram of synthesized polymer were obtained. These chemically modified materials were characterized by elemental analysis, solid-state ¹³C NMR CP/MAS, FTIR, XRD, TG and SEM. The chemically modified polysaccharides are able to adsorb cations. The data were adjusted to a modified Langmuir equation to give 1.75 ± 0.09 and 2.40 ± 0.12 mmol/g of Co²⁺ and Ni²⁺, respectively. The net thermal effects obtained from calorimetric titration measurements were also adjusted to a modified Langmuir equation and the enthalpy of the interaction was calculated to give the endothermic values of 0.29 ± 0.02 and 0.87 ± 0.02 kJ/mol for Co²⁺ and Ni²⁺, respectively. The thermodynamic data for these systems are favorable for cation adsorption from aqueous solutions at the solid/liquid interface, suggesting the use of this anchored biopolymer for cation removal from the environment.     

Non-isothermal crystallization kinetics of some aventurine decorative glaze

Thermal and structural properties of three clays (sepiolite and two kaolinites) from Turkey were studied by thermal analysis (TG–DTA), X-ray diffraction (XRD), X-ray fluorescence (XRF), Fourier transform infrared (FT-IR), and surface area measurement techniques The adsorption of sulfur dioxide (SO₂) gas by these clays was also investigated. SO₂ adsorption values of K1, K2, and S clay samples were measured at 20 °C and pressures up to 106 kPa. Sepiolite sample (S) primarily consists of pure sepiolite, only dolomite present as accompanying mineral. Both kaolinite samples, K1 and K2, mainly contain kaolinite as the major clay mineral and quartz as impurity. In K2 sample, muscovite phase is also present. Simultaneous TG–DTA curves of all clay samples were obtained at three different heating rates 10, 15, and 20 °C min⁻¹ over the temperature range 30–1200 °C. It was found that the retention value of SO₂ by S clay (2.744 mmol/g) was higher than those of K1 (0.144 mmol/g) and K2 (0.164 mmol/g) samples.     

Rapid method for simultaneous determination of ascorbic acid and zinc in effervescent tablets by capillary zone electrophoresis with contactless conductivity detection

Ascorbic acid and zinc are essential nutrients that play important roles in nutrition, immune support, and maintenance of health. For this reason, both compounds are widely used as ingredients in dietary supplements. We report, for the first time, an analytical method for fast simultaneous determination of ascorbic acid and zinc. A single analysis run is possible every 80 s (45 injections/h). The method is based on capillary electrophoresis with capacitively coupled contactless conductivity detection using a fused silica capillary with 50 cm length (effective length of 10 cm). The separation was achieved by using a background electrolyte composed by 30 mmol/L of 2‐(morpholin‐4‐yl)ethane‐1‐sulfonic acid and 30 mmol/L of histidine, pH 6.1. The detection limits were 10 and 20 μmol/L and recovery values for spiked samples were 101 and 100% for zinc and ascorbic acid, respectively. The results obtained with the developed procedure were compared to those obtained by titration (ascorbic acid) and flame atomic absorption spectroscopy (zinc), and no statistically significant differences were observed (95% confidence level).     

Silica gel-immobilized-vanillin derivatives as selective solid-phase extractants for determination of chromium (III) in environmental samples by ICP-OES

A method is described for the selective extraction of chromium(III) from aqueous solutions and natural water samples, based on the use of two newly synthesized solid-phase extractors via silica gel-immobilized-vanillin derivatives (I,II). Experimental conditions for effective adsorption of trace levels of Cr(III) were optimized with respect to different experimental parameters using batch and column procedures in detail. The optimum pH values for the separation of Cr(III) simultaneously on the newly sorbents were both 4.0 and complete elution of Cr(III) from the sorbents surface was carried out using 2.0 mL of 0.5 mol L^− 1 HCl. The sorption capacity of phase I towards Cr(III) was found to be 0.700 mmol g^− 1 where the sorption capacity of phase II was 0.538 mmol g^− 1. The detection limits (3σ) of the method defined by IUPAC were found to be 0.87 and 0.64 ng mL^− 1 with enrichment factors of 100 and 75 for phases I and II, respectively. The method has been applied for the determination of Cr(III) in biological materials and water samples with satisfactory results.     

Effect of sodium dodecyl sulfate on CO2 and H2S absorption enhancement of functionalized multiwall carbon nanotubes in water: Experimental study and empirical model

A single bubble absorption column was used to examine the effect of hydrodynamic on carbon dioxide (CO₂) and hydrogen sulfide (H₂S) absorption in pure water and water-based nanofluids dispersed with neat, and OH and NH₂ functionalized multiwall carbon nanotubes (MWCNTs). Sodium dodecyl sulfate (SDS) was used as a surfactant and stabilizer. The maximum absorption of CO₂ and H₂S were found to be 0.0038 mmol/m²·s and 0.056 mmol/m²·s using NH₂-MWCNTs /nanofluid with 0.5 wt% content, respectively. The diffusion coefficients of gases into the nanofluids were computed by using an equation attained based on Dankwert’s theory. A last, an empirical correlation was proposed to determine the Sherwood number for the absorption of the aforementioned gases into the nanofluids.     

Na-dodecylsulfate modification of hydrocalumite and subsequent effect on the structure and thermal decomposition

Hydrocalumite (CaAl-Cl-LDH) has the similar structure to layered double hydroxide (LDH). The effects of Na-dodecylsulfate (SDS) on the structure, morphology, and thermal property of CaAl-Cl-LDH have been investigated. Through ion exchange, CaAl-Cl-LDH had been modified with SDS at two concentrations: 0.005 mol L⁻¹ and 0.2 mol L⁻¹. Two different adsorption behaviors were observed through Fourier transform infrared (FTIR) spectra and X-ray diffraction (XRD) patterns. When the SDS concentration was 0.005 mol L⁻¹, surface anion exchange was the major process. When the SDS concentration was 0.2 mol L⁻¹, anion exchange intercalation occurs, with the interlayer distance expanded to 3.25 nm, and the particle morphology from regular hexagons to irregular platelets. The thermal analysis (TG–DTA) showed that dehydration and dehydroxylation occur at a lower temperature when hydrocalumite was intercalated with dodecylsulfate. All these observations revealed that the property of CaAl-Cl-LDH has been changed by SDS modification.     

Flow injection solid phase extraction electrothermal atomic absorption spectrometry for the determination of Cr(VI) by selective separation and preconcentration on a lab-made hybrid mesoporous solid microcolumn

A lab-made hybrid mesoporous solid was employed in a flow injection solid phase extraction electrothermal atomic absorption spectrometric (FI–SPE–ETAAS) system for the selective retention of Cr(VI). The solid was prepared by co-condensation of sodium tetraethylortosilicate and 3-aminopropyltriethoxysilane by sol–gel methodology and one-pot synthesis and characterized by Fourier transform infrared spectroscopy, X ray diffraction spectroscopy, and scanning electronic microscopy. Adsorption capacities at different pH values of both, Cr(VI) and Cr(III), were also measured in order to obtain the optimum retention for Cr(VI) with no interference of Cr(III). The maximum capacity of adsorption (4.35 mmol g^− 1) was observed for pH values between 2–3, whilst Cr(III) was found to remain in solution (adsorption capacity = 0.007 mmol g^− 1). Then, a microcolumn (bed volume: 7.9 µL) was filled with the solid and inserted in the FI–ETAAS system for analytical purposes. Since the analyte was strongly retained by the filling in the anionic form, 0.1 mol L^− 1 hydroxylammonium chloride in 1 mol L^− 1 hydrochloric acid was selected as eluent due to its redox characteristics. In this way, the sorbed Cr(VI) was easily released in the cationic form. The enrichment factor (EF) was found as a compromise between sensitivity and sample throughput and a value of 27 was obtained under optimized conditions: pH 2, sample loading 2 mL min^− 1 (60 s), elution flow rate 0.5 ml min^− 1 (eluent volume: 75 μL).     

Preparation of metal adsorbent from poly(methyl acrylate)-grafted-cassava starch via gamma irradiation

Metal adsorbent containing hydroxamic acid groups was successfully synthesized by radiation-induced graft copolymerization of methyl acrylate (MA) onto cassava starch. The optimum conditions for grafting were studied in terms of % degree of grafting (Dg). Conversion of the ester groups present in poly(methyl acrylate)-grafted-cassava starch copolymer into hydroxamic acid was carried out by treatment with hydroxylamine (HA) in the presence of alkaline solution. The maximum percentage conversion of the ester groups of the grafted copolymer, % Dg=191 (7.63 mmol/g of MA), into the hydroxamic groups was 70% (5.35 mmol/g of MA) at the optimum condition. The adsorbent of 191%Dg had total adsorption capacities of 2.6, 1.46, 1.36, 1.15 and 1.6 mmol/g-adsorbent for Cd²⁺, Al³⁺, UO₂²⁺, V⁵⁺ and Pb²⁺, respectively, in the batch mode adsorption.     

Influence of pH,ionic strength,foreign ions and FA on adsorption of radiocobalt on goethite

This work contributed to the adsorption of radiocobalt on goethite as a function of contact time, pH, ionic strength and foreign ions in the absence and presence of fulvic acid (FA) under ambient conditions. The results indicated that adsorption of Co(II) was dependent on ionic strength and foreign ions at low pH values (pH < 7.8), and independent of ionic strength and foreign ions at high pH values (pH > 7.8). Outer-sphere surface complexation and/or ion exchange were the main mechanisms of Co(II) adsorption on goethite at low pH values, whereas inner-sphere surface complexation was the main adsorption mechanism at high pH values. The presence of FA enhanced Co(II) adsorption at low pH values, but reduced Co(II) adsorption at high pH values. The thermodynamic data (ΔH ⁰, ΔS ⁰, ΔG ⁰) were calculated from the temperature dependent adsorption isotherms, and the results suggested that adsorption process of Co(II) on goethite was spontaneous and endothermic. The results are crucial to understand the physicochemical behavior of Co(II) in the nature environment.     

Stability study of α-bromophenylacetic acid: Does it represent an appropriate model analyte for chiral separations?

The stability of α-bromophenylacetic acid (BPAA) in 50% aqueous methanol solution has been tested. CE in different running buffers was used to separate BPAA from the decomposition reaction products α-hydroxyphenylacetic (mandelic) acid and α-methoxyphenylacetic acid. Suitable CE separation of all three compounds and other product, bromide, was achieved in 60 mmol/L formate buffer (pH 3.0) at −30 kV in 50 μm (i.d.) poly(vinyl alcohol)-coated fused silica capillary (30 cm/24.5 cm) with UV detection at 200 nm. The CE method was applied to determine the reaction order of the decomposition of BPAA (0.47 mmol/L) via nucleophilic substitution in 50% aqueous methanol. The first-order reaction kinetics was confirmed by linear and non-linear regression, giving the rate constants 1.52 × 10⁻⁴ ± 2.76 × 10⁻⁵ s⁻¹ and 7.89 × 10⁻⁵ ± 5.02 × 10⁻⁶ s⁻¹, respectively. Additionally, the degradation products were identified by CE coupled to mass spectrometric (MS) detection. The CE–MS experiments carried out in 60 mmol/L formate buffer (pH 3.0) and in 60 mmol/L acetate buffer (pH 5.0) confirmed the results obtained by CE–UV. Furthermore, the stability of BPAA in polar solvents was tested by ¹H NMR experiments. Our results provide strong evidence of the instability and fast degradation of BPAA in 50% aqueous methanol indicating that BPAA is not suitable as the model analyte for chiral separations.     

Amperometric PMMA-microchip with integrated gold working electrode for enzyme assays

The use of a gold film in-channel detector combined with a poly(methyl methacrylate) (PMMA) CE microchip has been tested for alkaline phosphatase (AP) enzymatic assays. Tris-borate or Tris-Gly (pH 9.0, 50 mmol L^–1) buffer solutions were appropriate as running buffer. Signals for three common AP products: -naphthol, p-nitrophenol, and ascorbic acid, were obtained. They were reproducible (RSD 4.4% for six successive electropherograms corresponding to 5 mmol L^–1 -naphthol solution) and the response was dependent on concentration (linear relationship for ascorbic acid solutions between 5 and 20 mmol L^–1 concentration). Use of an end-channel gold film electrode was also investigated. If one of the reagents (substrate or enzyme) is included in the running buffer, two different types of enzymatic assay are feasible in less than 3 min.     

Adsorption behaviour and surfactant elution of cationic salivary proteins at solid/liquid interfaces,studied by in situ ellipsometry

Adsorption of the cationic salivary proteins lactoferrin, lactoperoxidase, lysozyme and histatin 5 to pure (hydrophilic) and methylated (hydrophobized) silica surfaces was investigated by in situ ellipsometry. Effects of concentration (≤10 μg ml⁻¹, for lysozyme ≤200 μg ml⁻¹) and dependence of surface wettability, as well as adsorption kinetics and elutability of adsorbed films by buffer and sodium dodecyl sulphate (SDS) solutions were investigated. Results showed that the amounts adsorbed decreased in the order lactoferrin ≥ lactoperoxidase > lysozyme ≥ histatin 5. On hydrophilic silica, the adsorption was most likely driven by electrostatic interactions, which resulted in adsorbed amounts of lactoferrin that indicated the formation of a monolayer with both side-on and end-on adsorbed molecules. For lactoperoxidase the adsorbed amounts were somewhat higher than an end-on monolayer, lysozyme adsorption showed amounts corresponding to a side-on monolayer, and histatin 5 displayed adsorbed amounts in the range of a side-on monolayer. On hydrophobized substrata, the adsorption was also mediated by hydrophobic interactions, which resulted in lower adsorbed amounts of lactoferrin and lactoperoxidase; closer to side-on monolayer coverage. For both lysozyme and histatin 5 the adsorbed amounts were the same as on the hydrophilic silica. The investigated proteins exhibited fast adsorption kinetics, and the initial kinetics indicated mass transport controlled behaviour at low concentrations on both types of substrates. Buffer rinsing and SDS elution indicated that the proteins in general were more tightly bound to the hydrophobized surface compared to hydrophilic silica. Overall, the surface activity of the investigated proteins implicates their importance in the salivary film formation.     

Analysis of amino acids and biogenic amines in breast cancer cells by capillary electrophoresis using polymer solutions containing sodium dodecyl sulfate

We describe simultaneous analysis of naphthalene-2,3-dicarboxaldehyde (NDA)-amino acid and NDA-biogenic amine derivatives by CE in conjunction with light-emitting diode-induced fluorescence detection using poly(ethylene oxide) (PEO) solutions containing sodium dodecyl sulfate (SDS). After sample injection, via EOF 0.1% PEO prepared in 100 mM TB solution (pH 9.0) containing 30 mM SDS entered a capillary filled with 0.5 M TB solution (pH 10.2) containing 40 mM SDS. Under this condition, 14 NDA-amino acid and NDA-amine derivatives were separated within 16 min, with high efficiency ((1.0–3.2) × 10⁵ theoretical plates) and sensitivity (LODs at S/N = 3 ranging from 2.06 to 19.17 nM). In the presence of SDS and PEO, analytes adsorption on the capillary wall was suppressed, leading to high efficiency and reproducibility. The intraday analysis RSD values (n = 3) of the mobilities for the analytes are less than 0.52%. We have validated the practicality of this approach by quantitative determination of 9 amino acids in breast cancer cells (MCF-7) and 10 amino acids in normal epithelial cells (H184B5F5/M10). The concentrations of Tau and Gln in the MCF-7 cells were different than those in the H184B5F5/M10 cells, respectively. Our results show the potential of this approach for cancer study.     

Poly(3,4-ethylene-dioxythiophene) electrode for the selective determination of dopamine in presence of sodium dodecyl sulfate

A novel biosensor using poly(3,4-ethylene dioxythiophene) (PEDOT) modified Pt electrode was developed for selective determination of dopamine (DA) in presence of high concentrations of ascorbic acid (AA) and uric acid (UA) with a maximum molar ratio of 1/1000, and 1/100 in the presence of sodium dodecyl sulfate (SDS). SDS forms a monolayer on PEDOT surface with a high density of negatively charged end directed outside the electrode. The electrochemical response of dopamine was improved by SDS due to the enhanced accumulation of protonated dopamine via electrostatic interactions. The common overlapped oxidation peaks of AA, UA and DA can be resolved by using SDS as the DA current signal increases while the corresponding signals for AA and UA are quenched. The use of SDS in the electrochemical determination of dopamine using linear sweep voltammetry at modified electrode PEDOT/Pt resulted in detecting dopamine at relatively lower concentrations. The DA concentration could be measured in the linear range of 0.5 to 25 μmol L^? 1 and 30 μmol L^? 1 to 0.1 mmol L^? 1 with correlation coefficients of 0.998 and 0.993 and detection limits 61 nmol L^? 1 and 86 nmol L^? 1, respectively. The validity of using this method in the determination of dopamine in human urine was also demonstrated.     

Mesoporous silica thin film mechanized with a DNAzyme-based molecular switch for electrochemical biosensing

A novel electroanalytical strategy for copper and ascorbic acid detection was developed by using a nanostructured electrode surface mechanized with a DNAzyme-based molecular gate. This sensing interface was constructed by first electrodeposition of a mesoporous silica thin film on Au electrodes and further assembly of a Cu(II)-specific DNAzyme. The biosensing assay was based on the Cu(II) and ascorbic acid responsible activation of the DNAzyme, which acted as a molecular switch able to control the diffusion of the Fe(CN)₆^{3 −/4 −} electrochemical probe through the nanochannels of the mesoporous film.     

Comparative study of CTAB adsorption on bituminous coal and clay mineral

Adsorption of cetyltrimethylammonium bromide (CTAB) onto bituminous coal (BC) and a clay mineral, montmorillonite (MMT), was studied. Simultaneous measurements of the CTAB adsorption and zeta potential determination of the adsorption suspensions were carried out. The adsorption isotherms were found to be of the typical Langmuir type; values of the CTAB adsorption capacities were calculated (a _m = 0.65 mmol g⁻¹ for coal and a _m = 3.24 mmol g⁻¹ for MMT). The shape of the adsorption isotherms was correlated with zeta potential values at the adsorption equilibrium. The adsorption properties of both sorbents were studied by voltammetry on carbon paste electrodes (CPE) modified with coal-CTAB and MMT-CTAB system, respectively. Open circuit sorption with differential pulse voltammetry was performed in order to compare the sorption properties of the systems with the unmodified sorbents. The Cu²⁺ adsorption on BC and MMT decreased to approximately 50 % and 40 %, respectively. The surface adsorption mechanism of CTAB on coal based on hydrophilic interactions was proposed. In the case of montmorillonite, the CTAB intercalation is expected via ion exchange into the inter-layer space forming a double- or triple-layer arrangement.     

Adsorption of anionic methyl orange dye by polyaniline,poly(o-methylaniline) and poly(o-methoxyaniline)

This study reports the effect of substituents in the ortho position of polyaniline on the adsorption capacity to remove the anionic dye methyl orange (MO) from an aqueous solution. The aim of this study is the synthesis of polyaniline (PANI) and its derivatives, poly-o-methylaniline (poly-o-toluidine, POT) and poly-o-methoxyaniline (poly-o-anisidine, POA) for the adsorption removal of MO dye. All polymers were obtained by oxidative polymerization of the corresponding monomers and characterized by scanning electron microscopy (SEM) and infrared spectroscopy (IR). The average particle size of the polymer was about 200 nm. The effect of various parameters such as pH, temperature, adsorption time and initial concentration was analyzed. It was found that the adsorption capacity for dye removal increases from 50.68 to 222.56 mg g⁻¹ for PANI, from 16.89 to 66.57 mg g⁻¹ for POT, and from 97.26 to 532.54 mg g⁻¹ for POA with an increase in the initial dye concentration from 5 up to 50 mg L⁻¹. For all polymers, the equilibrium state of MO adsorption was reached in 50 min. The results showed that MO adsorption on PANI, POT, and POA is well described by a pseudo second order kinetic model. Isothermal studies have shown that adsorption is in good agreement with the Langmuir isotherm model, as evidenced by higher values of correlation coefficients. Based on the data of thermodynamic studies, it was concluded that MO adsorption on PANI, POT, and POA is spontaneous and endothermic.