Isothermal and nonisothermal cold crystallization kinetics of poly(<Emphasis Type="SmallCaps">l</Emphasis>-lactide)/functionalized eggshell powder composites

Functionalized eggshell powder (NES) with nucleating surface of calcium phenylphosphonic acid (PPCa) for poly(l-lactide) (PLLA) was compounded with PLLA via melt blending to improve the cold crystallization process of PLLA. The cold crystallization behavior of the PLLA/NES composites was studied by differential scanning calorimetry. The isothermal cold crystallization rates have been enhanced obviously in the PLLA/NES composites than in the neat PLLA, indicative of the excellent nucleating effects of NES on PLLA. For the nonisothermal cold crystallization, the overall crystallization rate of PLLA increased with both increasing NES loadings and heating rate. It was found that the Avrami equation and the combined Ozawa–Avrami model could describe the experiment data successfully.     

Polylactide stereocomplex crystallites as nucleating agents for isotactic polylactide

A nucleation efficiency scale for isotactic poly(L ‐lactide) (PLLA) was obtained with self‐nucleation and nonisothermal differential scanning calorimetry experiments. The maximum nucleation efficiency occurred at the highest concentration of self‐nucleating sites, and the minimum efficiency occurred in the absence of these sites (pure PLLA polymer melt). Blends of PLLA and isotactic poly(D ‐lactide) (PDLA) led to the formation of a 1/1 stereocomplex. In comparison with the homopolymer (PLLA), the stereocomplex had a higher melting temperature and crystallized at higher temperatures from the melt. Small stereocomplex crystallites were formed in PLLA/PDLA blends containing low concentrations of PDLA. These crystallites acted as heterogeneous nucleation sites for subsequent PLLA crystallization. Using the PLLA nucleation efficiency scale, we evaluated a series of PLLA/PDLA blends (0.25–15 wt % PDLA). A maximum nucleation efficiency of 66% was observed at 15 wt % PDLA. The nucleation efficiency was largely dependent on the thermal treatment of the sample. The nucleating ability of the stereocomplex was most efficient when it was formed well before PLLA crystallization. According to the efficiency scale, the stereocomplex was far superior to talc, a common nucleating agent for PLLA, in its ability to enhance the rate of PLLA crystallization. In comparison with the PLLA homopolymer, the addition of PDLA led to reduced spherulite sizes and a reduction in the overall extent of PLLA crystallization. The decreased extent of crystallization was attributed to the hindered mobility of the PLLA chains due to tethering by the stereocomplex. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 300–313, 2001     

Highly improved crystallization behavior of poly(L‐lactide) induced by a novel nucleating agent: substituted‐aryl phosphate salts

In this work, a novel nucleating agent (NA) based on substituted‐aryl phosphate salts was introduced into poly(L‐Lactide) (PLLA). The nonisothermal and isothermal crystallization behaviors of nucleated PLLA samples were investigated through differential scanning calorimetry (DSC), wide angle X‐ray diffraction, and polarized optical microscope (POM). Furthermore, the effect of annealing treatment on the cold crystallization behaviors of nucleated samples was also investigated. The results show that the crystallization of PLLA, whether for the melt crystallization (including nonisothermal and isothermal crystallization process) or for the cold crystallization (including the cold crystallization occurring during the DSC heating process and during the annealing process), is greatly dependent upon the content of NA. At relatively lower NA content (≤0.1 wt%), the nucleation effect of NA is inconspicuous, however, at higher NA content (≥0.2 wt%), it exhibits great nucleation effect for the crystallization of PLLA. Further results show that the double endothermic peak of PLLA depends on the temperature applied for the crystallization. Copyright © 2012 John Wiley & Sons, Ltd.     

Improve the thermal and mechanical properties of poly(L-lactide) by forming nanocomposites with pristine vermiculite

Poly(L-lactide)(PLLA)/pristine vermiculite nanocomposites were prepared by melt blending in a twin-screw extruder, and the detailed information of vermiculite dispersion state and effect of vermiculite on thermal and mechanical properties were systematically studied. The results show that the dispersion of vermiculite in the matrix is quite well when the loading content does not exceed 3 wt%. Pristine vermiculite can obviously improve the melt-crystallization temperature during the nonisothermal crystallization. Both crystallization time span and spherulitic size of PLLA decrease with the increasing amount of vermiculite under isothermal crystallization condition by enhancing the primary nucleation of PLLA. And the adding vermiculite can also improve the tensile modulus and Izod impact strength of PLLA. The intrinsic mechanism for the nucleating effect of vermiculite on PLLA is proposed to be the epitaxial crystallization and specific interaction between vermiculite and PLLA.     

Enhanced crystallization rate of biodegradable poly(<Emphasis Type="Italic">ε</Emphasis>-caprolactone) by cyanuric acid as an efficient nucleating agent

The influence of cyanuric acid (CA) as an efficient nucleating agent on the crystallization behavior and morphology of biodegradable poly(ε-caprolactone) (PCL) was extensively studied in this work with several techniques for the first time. The nonisothermal melt crystallization behavior and overall isothermal melt crystallization rate of PCL were significantly enhanced by only a small amount of CA. The addition of CA apparently improved the nonisothermal melt crystallization peak temperature, overall isothermal melt crystallization rate, and nucleation density of PCL spherulites, but did not modify the crystallization mechanism and crystal structure of PCL, indicating that CA was an efficient nucleating agent for the crystallization of PCL. The possible nucleation mechanism of CA on the crystallization of PCL was also discussed on the basis of their crystal structures.     

Crystallization of poly(butylene adipate) in the presence of nucleating agents

The effect of nucleating agents on the polymorphic crystallization behavior of poly(butylene adipate) (PBA) was studied with four kinds of commercially available nucleating agents, such as talc and boron nitride. The crystal structures of the α and β forms were studied with wide‐angle X‐ray diffraction. The β‐to‐α‐crystal transformation of PBA in the absence and presence of the nucleating agents in isothermal crystallization and nonisothermal crystallization processes was studied with differential scanning calorimetry and polarized optical microscopy. In both isothermal and nonisothermal crystallization, the introduction of nucleating agents selectively initiated the nucleation of the α‐form crystal, which was relatively slow in the absence of nucleating agents. The nucleating activity of the four kinds of nucleating agents in the crystallization of the PBA α‐form crystal was determined by the study of the nonisothermal crystallization, spherulite morphology, and isothermal kinetics. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2340–2351, 2005     

Nonisothermal crystallization behavior of the poly(ethylene glycol) block in poly(L‐lactide)–poly(ethylene glycol) diblock copolymers: Effect of the poly(L‐lactide) block length

The confined crystallization behavior, melting behavior, and nonisothermal crystallization kinetics of the poly(ethylene glycol) block (PEG) in poly(L ‐lactide)–poly(ethylene glycol) (PLLA–PEG) diblock copolymers were investigated with wide‐angle X‐ray diffraction and differential scanning calorimetry. The analysis showed that the nonisothermal crystallization behavior changed from fitting the Ozawa equation and the Avrami equation modified by Jeziorny to deviating from them with the molecular weight of the poly(L ‐lactide) (PLLA) block increasing. This resulted from the gradual strengthening of the confined effect, which was imposed by the crystallization of the PLLA block. The nucleation mechanism of the PEG block of PLLA15000–PEG5000 at a larger degree of supercooling was different from that of PLLA2500–PEG5000, PLLA5000–PEG5000, and PEG5000 (the numbers after PEG and PLLA denote the molecular weights of the PEG and PLLA blocks, respectively). They were homogeneous nucleation and heterogeneous nucleation, respectively. The PLLA block bonded chemically with the PEG block and increased the crystallization activation energy, but it provided nucleating sites for the crystallization of the PEG block, and the crystallization rate rose when it was heterogeneous nucleation. The number of melting peaks was three and one for the PEG homopolymer and the PEG block of the diblock copolymers, respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3215–3226, 2006     

Effects of carbon nanotubes on crystallization and melting behavior of poly(L‐lactide) via DSC and TMDSC studies

In this work, multiwalled carbon nanotubes (MWNTs) were surface‐modified and grafted with poly(L ‐lactide) to obtain poly(L ‐lactide)‐grafted MWNTs (i.e. MWNTs‐g‐PLLA). Films of the PLLA/MWNTs‐g‐PLLA nanocomposites were then prepared by a solution casting method to investigate the effects of the MWNTs‐g‐PLLA on nonisothermal and isothermal melt‐crystallizations of the PLLA matrix using DSC and TMDSC. DSC data found that MWNTs significantly enhanced the nonisothermal melt‐crystallization from the melt and the cold‐crystallization rates of PLLA on the subsequent heating. Temperature‐modulated differential scanning calorimetry (TMDSC) analysis on the quenched PLLA nanocomposites found that, in addition to an exothermic cold‐crystallization peak in the range of 80–120 °C, an exothermic peak in the range of 150–165 °C, attributed to recrystallization, appeared before the main melting peak in the total and nonreversing heat flow curves. The presence of the recrystallization peak signified the ongoing process of crystal perfection and, if any, the formation of secondary crystals during the heating scan. Double melting endotherms appeared for the isothermally melt‐crystallized PLLA samples at 110 °C. TMDSC analysis found that the double lamellar thickness model, other than the melting‐recrystallization model, was responsible for the double melting peaks in PLLA nanocomposites. Polarized optical microscopy images found that the nucleation rate of PLLA was enhanced by MWNTs. TMDSC analysis found that the incorporation of MWNTs caused PLLA to decrease the heat‐capacity increase (namely, ΔC_p) and the C_p at glass transition temperature. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1870–1881, 2007     

A new route of manipulation of poly(L‐lactic acid) crystallization by self‐assembly of p‐tert‐butylcalix[8]arene and toluene

A novel nucleating agent (TBC8‐t), self‐assembled with p‐tert‐butylcalix[8]arene (TBC8) and toluene, was used to manipulate the crystallization behavior of poly(L ‐lactic acid) (PLLA). Toluene molecules were used to adjust the crystallization structure of TBC8. Differential scanning calorimetry results show that the crystallization peak temperature (T_c) and crystallization rate (ΔH_c/time) of PLLA nucleated with TBC8‐t are 132.3 °C and 0.24 J/gs, respectively, which are much higher than that with conventional nucleating agent‐talc (T_c = 119.3 °C, ΔH_c/time = 0.13 J/gs). The results of polarized optical microscopy demonstrate that TBC8‐t could greatly enhance the crystallization rate of PLLA by increasing the nucleation rate rather than crystal growth rate. Along with an improvement of the crystallization rate, the crystalline morphology of PLLA is also affected by TBC8‐t. The addition of TBC8‐t transforms most of the original spherulite crystals into sheaf‐like crystals. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1235–1243, 2010     

Enhanced Crystallization Rate of Biodegradable Poly(ε-caprolactone) by Cyanuric Acid as an Efficient Nucleating Agent

The influence of cyanuric acid(CA) as an efficient nucleating agent on the crystallization behavior and morphology of biodegradable poly(ε-caprolactone)(PCL) was extensively studied in this work with several techniques for the first time. The nonisothermal melt crystallization behavior and overall isothermal melt crystallization rate of PCL were significantly enhanced by only a small amount of CA. The addition of CA apparently improved the nonisothermal melt crystallization peak temperature, overall isothermal melt crystallization rate, and nucleation density of PCL spherulites, but did not modify the crystallization mechanism and crystal structure of PCL, indicating that CA was an efficient nucleating agent for the crystallization of PCL. The possible nucleation mechanism of CA on the crystallization of PCL was also discussed on the basis of their crystal structures.     

Achieving highly crystalline rate and crystallinity in Poly(l-lactide) via in-situ melting reaction with diisocyanate and benzohydrazine to form nucleating agents

The drawback of the application for poly(_l-lactide) (PLLA) is the low crystalline rate and crystallinity obtaining via normal processing methods. Modifying crystallization of PLLA has been found to be an efficient way to improve its mechanical and heat resistance properties. In this wok, 4, 4′-diphenylmethane diisocyanate (M) and benzohydrazine (P) were employed into PLLA melt to in-situ form nucleating agents. The in-situ melting reaction was confirmed by a nuclear magnetic resonance spectroscopy. The crystallization behavior and crystalline morphology were investigated by a differential scanning calorimetry, a polarized optical microscopy and a field emission scanning electron microscope. The crystalline rate of PLLA was abruptly enhanced by adding (M+P) and melting reaction with PLLA. The crystallization half-time of PLLA dramatically decreased from 42.0 to 1.1 min at 130 °C by the in-situ formation of nucleating agents. The crystallinity of PLLA increased from 10.3 to 42.1 by adding 0.25% (M+P) and melting reaction for 8 min. Furthermore, the size of PLLA crystals was dramatically reduced because of the nucleating effect. Accompanied with improvement on crystallinity, the Vicat softening temperature of PLLA shifted from 57.4 °C to 93.7 °C by the in-situ reaction with 6.00% (M+P), and indicating heat resistance enhancement.     

The influences of α/β compound nucleating agents based on octamethylenedicarboxylic dibenzoylhydrazide on crystallization and melting behavior of isotactic polypropylene

The influences of α/β compound nucleating agents based on octamethylenedicarboxylic dibenzoylhydrazide on crystallization and melting behavior of isotactic polypropylene (iPP) were analyzed. It is found that the crystallization temperatures of nucleated iPP were increased by above 11.0°C and the relative contents of β‐crystals (K_β ) in iPP reached above 0.40 after addition of compound nucleating agents. The K_β values depend on cooling rate, crystallization temperature in isothermal crystallization, and the difference between the crystallization temperatures of iPP nucleated by two individual nucleating agents. The nonisothermal crystallization kinetics were studied by Caze method and Mo method, respectively. The effective activation energy was calculated by the Friedman's method. The results illustrate that the half crystallization time was shortened and the crystallization rate was increased obviously after addition of nucleating agents, and the effective activation energy was increased with the relative crystallinity.     

聚甲醛/蒙脱土纳米复合材料非等温结晶动力学研究

聚甲醛/蒙脱土纳米复合材料非等温结晶动力学研究     

Effect of poly(vinyl alcohol) fine particles as a novel biodegradable nucleating agent on the crystallization of poly(3‐hydroxybutyrate)

The effect of poly(vinyl alcohol)(PVA) fine particles as the nucleating agent on the crystallization behavior of bacterial poly(3‐hydroxybutyrate)(PHB) was studied using differential scanning calorimetry measurements and polarized light microscope observation. The results were compared with the effect of PVA conventionally blended with PHB. The PVA fine particles were found to be able to greatly enhance the crystallization of PHB, while the conventionally blended PVA extremely retarded the crystallization of PHB. The nucleating effect of PVA fine particles is almost comparable to that of the talc powder. Considering the biodegradability and biocompatibility of PVA, the usage of PVA particle as a nucleating agent provides marked benefits over the currently employed nonbiodegradable nucleating agents, such as talc and boron nitride. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44:1813–1820, 2006     

Synergistic effects of PEG and MWCNTs on crystallization behavior of PLLA

This work reported the crystallization behaviors of poly(L ‐lactide) (PLLA) with the presence of polyethylene glycol (PEG) and/or functionalized multiwalled carbon nanotubes (FMWCNTs). The crystallization behaviors occurred in the different conditions, including nonisothermal, isothermal and during the annealing process, were analyzed comparatively using differential scanning calorimetry, wide angle X‐ray diffraction, and polarized optical microscope. The results show that PEG as an efficient plasticizer of PLLA enhances the mobility of PLLA chain segments, which leads to the decrease of glass transition temperature and the enhancement of crystallization ability of PLLA. FMWCNTs as a nucleating agent of PLLA crystallization promote the crystallization of PLLA apparently. With the presence of PEG and FMWCNTs, the crystallization of PLLA is well improved in all conditions, indicating the synergistic effects of PEG and FMWCNTs on PLLA crystallization. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 520–528, 2010     

Nonisothermal crystallization behavior of polypropylene-clay nanocomposites

The influence of two concentrations of clay nanoparticles on the nonisothermal crystallization behavior of the intercalated polypropylene-clay nanocomposites is investigated here. It is observed that the crystallization peak temperature (T_p) of PP-clay nanocomposites is marginally higher than neat PP at various cooling rates. Furthermore, the half-time for crystallization (t_0.5) decreased with increase in clay content, implying the nucleating role of clay nanoparticles. The nonisothermal crystallization data is analyzed using Avrami, Ozawa and Mo and coworkers methods. The validity of kinetic models on the nonisothermal crystallization process of PP-clay nanocomposites is discussed. The approach developed by Mo and coworkers successfully describes the nonisothermal crystallization behavior of PP and PP-clay nanocomposites. The activation energy for nonisothermal crystallization of pure PP and PP-clay nanocomposites based on Kissinger method is evaluated.     

The crystalline behavior of poly(L-lactide) induced by nucleating agents with amide structure: The effect of benzamide molecule symmetry

Amide nucleating agents have been reported to be effective in promoting poly(_L-lactide) (PLLA) crystallization, while few research efforts have focused on the structure–activity relationship of the nucleating agents which is one basic issue to develop new agents. In this work, three amide nucleating agents with different symmetry were designed and synthesized to investigate the effect of the symmetry of benzamide nucleating agents on PLLA crystallization. It is found that the C3 symmetric amide structure of N, N′, N″-tricyclohexyl-1,3,5-benzenetriamine (BTCA) agent can form a highly oriented structure by a triple hydrogen bond of π–π bond and benzene ring and can act as efficient nucleation sites. In addition, the strong intramolecular hydrogen bond with PLLA would further promote the crystallization of PLLA. In general, it is the self-assembled ability and intramolecular hydrogen bonding with PLLA affects the rate and degree of PLLA crystallinity, and we find the C3 symmetric amide structure exhibits the best performance.     

Poly(L‐lactide)/C60 nanocomposites: Effects of C60 on crystallization of poly(L‐lactide)

The effects of solvent type and concentration of C₆₀ on the crystallization of poly(L ‐lactide) (PLLA) during solvent evaporation, heating from room temperature, and cooling from the melt were investigated by polarized optical microscopy and differential scanning calorimetry. The addition of C₆₀ enhanced the PLLA crystallization during solvent evaporation, during heating of the melt‐quenched films, and during cooling from the melt of As‐cast films, except for heating and cooling of the PLLA film with 1 wt % of C₆₀ prepared with dichloromethane. In the case of solvent evaporation, the difference in crystallinity between the PLLA films with and without C₆₀ became higher for the solvent with a lower boiling point. In the case of heating of melt‐quenched films, the addition of C₆₀ had a small effect on the crystallinity of PLLA, whereas significantly lowered the peak top and ending temperatures of cold crystallization, except for melt‐quenched PLLA film with 1 wt % of C₆₀ prepared with dichloromethane. The crystallinity of PLLA was determined by the solvent type, rather than by the C₆₀ concentration. In the case of cooling from the melt of As‐cast films, the addition of C₆₀ elevated the crystallinity and cold crystallization temperature values of PLLA films, except for PLLA films prepared with dichloromethane. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2167–2176, 2007     

Effect of carbon nanotubes on the crystallization and properties of polypropylene

The effect of different concentrations of single‐walled carbon nanotubes (SWNTs) on the nonisothermal crystallization kinetics, morphology, and mechanical properties of polypropylene (PP) matrix composites obtained by melt compounding was investigated by means of X‐ray diffraction, differential scanning calorimetry, optical and scanning electron microscopy, and dynamic mechanical thermal analysis. Microscopy showed well‐dispersed nanotube ropes together with small and large aggregates. The modulus was found to increase by about 75% at a level of 0.5 wt % nanotubes. The SWNTs displayed a clear nucleating effect on the PP crystallization, favoring the α crystalline form rather than the β form. The crystallization kinetics analysis showed a significant increase in activation energy on incorporating nanotubes. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2445–2453, 2005     

Influence of talc with different particle sizes in melt‐mixed LLDPE/MWCNT composites

Linear low‐density polyethylene (LLDPE) was melt‐mixed with multiwalled carbon nanotubes (MWCNTs) and varying amounts of three different kinds of talc (phyllo silicate), each with a different particle size distribution, to examine the effect of these filler combinations with regards to the electrical percolation behavior. The state of the filler dispersion was assessed using transmission light microscopy and electron microscopy. The use of talc as a second filler during the melt mixing of LLDPE/MWCNT composites resulted in an improvement in the dispersion of the MWCNTs and a decrease of the electrical percolation threshold. Talc with lower particle sizes showed a more pronounced effect than talc with larger particle sizes. However, the improvement in dispersion was not reflected in the mechanical properties. Modulus and stress values increase with both, MWCNT and talc addition, but not in a synergistic manner. The crystallization behavior of the composites was studied by differential scanning calorimetry to determine its potential influence on the electrical percolation threshold. It was found that the crystallinity of the matrix increased slightly with the addition of talc but no further increments were observed with the incorporation of the MWCNTs. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1680–1691