胶束催化作用下实现聚苯乙烯的氯甲基化

用紫外分光光度法测定了离子型表面活性剂胶束溶液对聚苯乙烯四氯化碳溶液的增溶性能; 用胶束催化法实现了聚苯乙烯的氯甲基化, 用红外光谱法和佛尔哈德法表征了氯甲基化聚苯乙烯的化学结构与组成; 通过比较阴、 阳离子表面活性剂及结构不同的阳离子表面活性剂的催化效果, 探索了胶束催化的作用机理, 考察了表面活性剂结构对催化作用的影响规律. 结果表明, 表面活性剂胶束溶液可增溶聚苯乙烯的四氯化碳溶液, 随着四氯化碳在胶束中的增溶, 聚苯乙烯可转移至表面活性剂的胶束中; 胶束催化是实现聚苯乙烯的氯甲基化的有效途经, 仅用3.35 g/L的十六甲基三甲基溴化铵(CTAB),  于65 ℃， 5 h内即可使聚苯乙烯大分子链中的苯环氯甲基化程度达到37%; 聚苯乙烯与甲醛、 氯化氢的反应过程由亲电取代和亲核取代串联而成, 阳离子表面活性剂比阴离子表面活性剂的催化作用更加有效, 说明亲核取代是慢步骤; 阳离子表面活性剂疏水链越长, 对聚苯乙烯的增溶效果越好, 催化作用越强.     

寡聚表面活性剂的合成及其聚集行为的研究

寡聚表面活性剂是由2个或2个以上单头单链的表面活性剂在头基处或靠近头基处由连接基团通过化学键连接而成的二聚、三聚、四聚乃至更高寡聚度的分子.Gemini表面活性剂(二聚表面活性剂)是最简单,也是最早被发现的寡聚表面活性剂,已经被大量报道.已有综述很好地总结了Gemini表面活性剂的物理化学性质.本文主要综述三聚及三聚以上寡聚表面活性剂的研究进展,包括寡聚表面活性剂的合成和结构、表/界面性质以及溶液中的聚集行为等,以期使研究者比较全面地认识寡聚表面活性剂领域的研究进展.     

苄泽类非离子型表面活性剂与明胶的相互作用

采用表面张力和稳态荧光光谱法考察了具有不同疏水结构的2种苄泽类非离子型表面活性剂Brij58和Brij78与明胶之间的相互作用。结果表明,苄泽类非离子型表面活性剂与明胶之间相互作用的驱动力为疏水作用力,且两者之间的相互作用受到其疏水基团的影响,Brij78在明胶溶液中的临界聚集浓度低于Brij58体系,表明疏水链更长的Brij78与明胶之间的相互作用更强。明胶分子的内源荧光光谱强度受苄泽类非离子型表面活性剂的影响,但最大吸收峰位置未发生蓝移,Brij78/明胶体系的内源荧光强度高于Brij58/明胶体系;此外,表面活性剂浓度较低时,明胶的加入使溶液中疏水微区极性明显降低,且明胶浓度越大降低程度越大。     

介观模拟方法研究高分子表面活性剂在水介质中的聚集行为

高分子表面活性剂已广泛应用于许多领域, 其构型复杂、分子量大等特点使其聚集行为不同于小分子表面活性剂. 从微观上认识其聚集行为可为应用提供指导, 因而此方面的研究倍受关注. 计算机模拟技术的发展使我们能成功地在微观或介观水平上获得高分子表面活性剂聚集行为的信息. 本文综述了耗散粒子动力学(DPD)和介观动力学(MesoDyn)在高分子表面活性剂聚集行为研究中的应用. 着重介绍了这两种介观模拟方法研究单一高分子表面活性剂溶液的相行为及其与低分子表面活性剂之间的相互作用, 揭示了实验中难以观测的微观相分离及聚集体结构形态的变化规律. 这些信息可以为实验研究提供指导和补充.     

疏水缔合聚丙烯酰胺与双子表面活性剂的自组装

通过荧光光谱、动/静态激光光散射研究了疏水缔合聚丙烯酰胺(HAPAM)自组装行为及双子表面活性剂(双十四酸乙二酯双磺酸盐(DMES-14))对其的影响.实验结果表明:聚合物HAPAM在溶液中能够通过自组装形成疏水微区,表现出芘的发射光谱中第一振动峰(373nm)与第三振动峰(383nm)的荧光强度之比(I1/I3)值随聚合物浓度的增大而下降,当聚合物HAPAM浓度(CP)达到一定值后,I1/I3值不再变化;当加入表面活性剂时,HAPAM能够与双子表面活性剂在溶液中形成混合胶束,在聚合物浓度一定时,I1/I3值随表面活性剂浓度(CS)的增大急速下降,当表面活性剂浓度达到30mg·L-1时,I1/I3值趋于恒定;当表面活性剂浓度一定时,聚合物/表面活性剂二元体系中聚集体的聚集数随HAPAM浓度的增大出现先下降再增加的过程;一定量的双子表面活性剂对HAPAM分子间的缔合起促进作用,过量的双子表面活性剂对HAPAM分子间的缔合起抑制作用,使HAPAM的表观重均分子量(Mw,a)、均方根回转半径()和流体力学半径()随表面活性剂浓度增加先增大后减小,而HAPAM的/比值则随表面活性剂浓度增大出现一定程度的上升,表明HAPAM分子链段变得相对舒展.     

基于芘荧光行为的表面活性剂胶束及其与酶缔合作用研究

采用芘作为外源荧光探针,对4种类型表面活性剂(RL,SDS,CTAB和Tween 80)的胶束化过程及其与纤维素酶、漆酶缔合的特征进行探讨。在各表面活性剂的浓度变化范围为0.01～4倍CMC(临界胶束浓度)条件下,不同类型的表面活性剂所引起的芘荧光行为变化存在差异。结果表明:芘荧光强度的变化与表面活性剂的性质、浓度和荧光猝灭因子有关。纤维素酶因与表面活性剂和芘发生疏水性吸附,使芘荧光I1/I3值减小。而在漆酶介入下,芘的荧光强度显著减小,但I1/I3值与不含酶体系的特征相似,这与漆酶中含有Cu2+以及漆酶的强亲水性有关。在高于临界胶束浓度时,生物表面活性剂RL与酶缔合的稳定性高于SDS。     

电解质和乙醇对DNA与Gemini表面活性剂相互作用的影响

应用荧光探针和zeta电位方法研究了电解质NaBr、NaCl、KCl和有机溶剂乙醇对DNA与Gemini表面活性剂相互作用的影响. DNA诱导的表面活性剂类胶束在较低浓度即可生成, 这一浓度称为临界聚集浓度(CAC). Gemini表面活性剂比具有相同烷烃链长的单体表面活性剂更易聚集, 对应的CAC较低. 实验结果表明, 盐(NaBr)浓度对DNA/表面活性剂体系的CAC影响不大, 阴、阳离子的种类则对该体系有不同程度的影响. 阴离子(Br-、Cl-)对体系的CAC有显著的影响, 但阳离子(Na+、K+)的差异对CAC影响不大. 极性溶剂乙醇对DNA与表面活性剂相互作用的影响比较复杂. 乙醇浓度较低时有利于表面活性剂的聚集, 使得CAC减小; 而浓度较高时, 则不利于表面活性剂聚集,从而使CAC变大. 乙醇可显著改变DNA/表面活性剂复合物的zeta电位.     

含Gemini表面活性剂结构单元的新型两亲聚电解质的合成及聚集行为

分别将Gemini型单体1,3-双(二甲基十四烷基溴化铵)-2-丙烯酰氧基丙烷(14G)或1,3-双(二甲基十六烷基溴化铵)-2-丙烯酰氧基丙烷(16G)与丙烯酰氧乙基三甲基氯化铵(DAC, D)共聚合反应, 合成了新型含Gemini表面活性剂结构单元的两亲性阳离子聚电解质(D14G和D16G). 采用稳态荧光、电导、动态光散射及透射电镜等手段研究了这些聚电解质在水溶液中的聚集行为. 结果表明, 临界聚集浓度(CAC)随着Gemini型表面活性剂单元含量的增加而减小, 同时随着Gemini型表面活性剂单元中疏水碳链长度的增加而降低. 这些聚电解质在水溶液中同时存在分子内和分子间两种类型的聚集体, 而且碳链越长, 形成分子内聚集体的倾向越强. 随着Gemini表面活性剂单元含量的增加, D14G溶液中聚集体的流体动力学半径(Rh)也有所增大, 而D16G溶液中的聚集体的流体动力学半径(Rh) 却略有减小.     

含酯基Gemini表面活性剂在有机醇-水体系中的胶束热力学及聚集行为

采用电导法研究了不同温度下含酯基Gemini表面活性剂在纯水和在质量分数为10%的甲醇-水(MAWR),乙二醇-水(EG-WR),丙三醇-水(GL-WR)四种体系中的集聚行为和胶束热力学;聚集行为参数包括临界胶束浓度(cmc)和抗衡离子的解离程度(α)以及胶束的热力学参数,包括标准吉布斯自由能(ΔG_m~o)、吉布斯迁移自由能(ΔG_(trans)~o)、吉布斯烷基链胶束化自由能(ΔG_(tail)~o)、标准焓变(ΔH_m~o)和标准熵变(ΔS_m~o),均被计算和讨论。研究表明在所有的研究体系中,cmc值随着疏水链的增加而减小,随着加入的醇结构中羟基数目的增加而增大,随温度的升高先变小,后变大呈U字形;胶束化过程都是自发进行的,并且在293.15 K下,胶束化过程是吸热的,在293.15 K上,胶束化过程是放热的;通过稳态荧光光谱法研究了表面活性剂在纯水、有机醇-水混合溶液中的微极性,结果表明,在相同溶剂中,随着烷基链长度的增加,溶液微环境的疏水性越强;对于相同的Gemini表面活性剂,随着加入含羟基数目越多的醇,其微环境的疏水性越强。并研究了Gemini表面活性剂在混合体系中形成胶束过程的焓-熵补偿曲线。     

m-6-m型Gemini双季铵盐表面活性剂与DNA的相互作用

合成了5种m-6-m型Gemini双季铵盐表面活性剂,在对产物结构和表面活性进行分析的基础上,分别采用紫外分光光度法和荧光分光光度法考察了m-6-m型Gemini双季铵盐表面活性剂与DNA的相互作用.结果表明,m-6-m型Gemini表面活性剂的CMC随烷基疏水链的增长呈逐渐下降趋势.几种表面活性剂均没有使DNA的紫外吸收峰发生红移或蓝移现象,说明复合物无嵌插作用或氢键形成,表面活性剂与DNA作用后的吸光度随表面活性剂浓度的增大而增强,当表面活性剂的浓度相同时,吸光度随疏水链的增大而逐渐减弱.Gemini表面活性剂浓度增大导致荧光强度降低,表面活性剂与DNA作用时的猝灭为静态猝灭,随着疏水链长度的增长,荧光猝灭常数降低,表面活性剂与DNA之间的作用力减弱.     

Characterization and Aggregation Behaviors of Mixed DDAB/SDS Solution With and Without Poly(4-styrenesulfonic Acid-Co-Maleic Acid) Sodium

Synthetic vesicles are formed by cationic and anionic surfactants, didodecyldimethylammonium bromide (DDAB), and sodium dodecylsulfate (SDS). The morphology, size, and aqueous properties of cationic/anionic mixtures are investigated at various molar ratios between cationic and anionic surfactants. The charged vesicular dispersions made of DDAB/SDS are contacted or mixed with negatively charged polyelectrolyte, poly(4-styrenesulfonic acid-co-maleic acid) sodium (PSSAMA), to form complexes. Depending on DDAB/SDS molar ratio or PSSAMA/vesicle charge ratio, complexes flocculation or precipitation occur. Characterization of the cationic/anionic vesicles or complexes formed by the catanionic vesicles and polyelectrolytes is performed by transmission electron microscope (TEM), dynamic light scattering (DLS), conductivity, turbidity, and zeta potential measurements. The size, stability, and the surface charge on the mixed cationic/anionic vesicles or complexes are determined.     

Didodecyldimethylammonium bromide lipid bilayer-protected gold nanoparticles: synthesis, characterization, and self-assembly

Didodecyldimethylammonium bromide (DDAB) lipid bilayer-protected gold nanoparticles (AuNPs), which were stable and hydrophilic, were synthesized by in situ reduction of HAuCl(4) with NaBH(4) in an aqueous medium in the presence of DDAB. As-prepared nanoparticles were characterized by UV-vis spectra, transmission electron microscopy, dynamic light scattering analysis, and X-ray photoelectron spectroscopy. All these data supported the formation of AuNPs. Fourier transform infrared spectroscopy (FTIR) and differential thermal analysis/thermogravimetric analysis data revealed that DDAB existed in a bilayer structure formed on the particle surface, resulting in a positively charged particle surface. The FTIR spectra also indicated that the DDAB bilayer coated on the surface of AuNPs was probably in the ordered gel phase with some end-gauche defects. On the basis of electrostatic interactions between such AuNPs and anionic polyelectrolyte poly(sodium 4-styrenesulfonate) (PSS), we successfully fabricated (PSS/AuNP)(n)() multilayers on a cationic polyelectrolyte poly(ethylenimine) coated indium tin oxide substrate via the layer-by-layer self-assembly technique and characterized as-formed multilayers with UV-vis spectra and atomic force microscopy.     

正、负离子碳氟-碳氢表面活性剂混合水溶液的表面活性

1　前言碳氟表面活性剂是目前所有表面活性剂中表面活性最高的一类 ,具有很多碳氢表面活性剂无法取代的特殊用途[1] 。但是碳氟表面活性剂由于合成困难 ,价格昂贵 ,实际应用受到限大限制。研究表明 ,通过碳氟表面活性剂与碳氢表面活性剂的复配 ,有可能减少碳氟表面活性剂的用量而保持其表面活性 [1] 。在所有表面活性剂混合体系中 ,正、负离子表面活性剂混合体系具有最强的协同效应 [2 ] 。但由于正、负离子表面活性剂混合溶液一般在很低浓度即形成沉淀 ,对碳氟表面活性剂更是如此。因此目前有关碳氟—碳氢混合表面活性剂的研究主要集中在同…     

Interaction Parameters of Anhydrous Cationic Surfactant Mixtures by Inverse Gas Chromatography

The miscibility of anhydrous cationic surfactant dodecylpyridinium chloride (DPC) and hexadecylpyridinium bromide (cetylpyridinium bromide (CPB)) mixtures has been studied by using them as stationary phases in Inverse Gas Chromatography (IGC). The temperature zone of work was determined by IGC and Differential Scanning Calorimetry (DSC) techniques. Values of the interaction parameter between the surfactants obtained at four different compositions and at four temperatures showed that the miscibility depends on the overall composition and suggested that the interactions are more favorable near the center of the composition range. Results are compared with other anhydrous cationic surfactant mixtures studied by IGC, the system didodecyldimethylammonium bromide (DDAB) and dioctadecyldimethylammonium bromide (DODAB), two twin-tailed surfactants, and are interpreted in terms of the structure of the anhydrous lamellar liquid crystals compared with that of aqueous lamellar mesophases.     

Spontaneous aggregate transition in mixtures of a cationic gemini surfactant with a double-chain cationic surfactant

Controllable aggregate transitions were realized by mixing two kinds of cationic surfactants, hexylene-1,6-bis(dodecyldimethylammonium bromide) (C(12)C(6)C(12)Br(2)) and didodecyldimethylammonium bromide (DDAB). It was found that two parameters are the main factors determining the aggregation behavior of the mixed system, the total concentration of DDAB and C(12)C(6)C(12)Br(2) (C(T)), and the mole fraction of DDAB in the mixtures of DDAB and C(12)C(6)C(12)Br(2) (X(DDAB)). How these two parameters act on the aggregate transitions was studied in detail by various measurements including surface tension, turbidity, electrical conductivity, ζ potential, isothermal titration microcalorimetry, dynamic light scattering, cryogenic transmission electron microscopy, and (1)H NMR. When C(T) was constant, spontaneous vesicle-to-micelle transitions were found with decreasing X(DDAB) at high C(T). When X(DDAB) was constant, aggregate transitions were generated by gradually increasing C(T), depending on different X(DDAB) ranges. At X(DDAB) < 0.6, small spherical aggregates formed first and then transferred to vesicles, and finally the vesicles transitioned to micelles. At X(DDAB) ≥ 0.6, the progressive increase in C(T) led to aggregate transitions on the order of the arising of vesicles, the continuous growth of vesicles, the disruption of vesicles into micelles, and the final coexistence of vesicles and micelles. The hydrophobic interaction and electrostatic repulsion between DDAB and C(12)C(6)C(12)Br(2) together with the related degree of ionization and hydration of the surfactants were gradually adjusted by changing the ratio and the total concentration of these two surfactants, which should be responsible for the complicated aggregation behavior.     

Aqueous Two‐Phase System (ATPS) Containing Gemini (12‐3‐12,2Br−) and SDS I: Phase Diagram and Properties of ATPS

Two phases coexist in an aqueous system that contains the two surfactants cationic gemini 12‐3‐12,2Br? and anionic SDS. An aqueous two‐phase system (ATPS) is formed in a narrow region of the ternary phase diagram different from that of traditional aqueous cationic‐anionic surfactant systems. In that region, the molar ratio of gemini to SDS varies with the total concentration of surfactants. ATPS not only has higher stability but also has longer phase separation time for the new systems than that of the traditional system. Furthermore, the optical properties of ATPS are different at different total concentrations. All of these experimental observations can be attributed to the unique properties of gemini surfactant and the synergy between the cationic gemini surfactant and the anionic surfactant SDS.     

Cationic liposomes in mixed didodecyldimethylammonium bromide and dioctadecyldimethylammonium bromide aqueous dispersions studied by differential scanning calorimetry, Nile Red fluorescence, and turbidity

The thermotropic phase behavior of cationic liposomes in mixtures of two of the most investigated liposome-forming double-chain lipids, dioctadecyldimethylammonium bromide (DODAB) and didodecyldimethylammonium bromide (DDAB), was investigated by differential scanning calorimetry (DSC), turbidity, and Nile Red fluorescence. The dispersions were investigated at 1.0 mM total surfactant concentration and varying DODAB and DDAB concentrations. The gel to liquid-crystalline phase transition temperatures (Tm) of neat DDAB and DODAB in aqueous dispersions are around 16 and 43 degrees C, respectively, and we aim to investigate the Tm behavior for mixtures of these cationic lipids. Overall, DDAB reduces the Tm of DODAB, the transition temperature depending on the DDAB content, but the Tm of DDAB is roughly independent of the DODAB concentration. Both DSC and fluorescence measurements show that, within the mixture, at room temperature (ca. 22 degrees C), the DDAB-rich liposomes are in the liquid-crystalline state, whereas the DODAB-rich liposomes are in the gel state. DSC results point to a higher affinity of DDAB for DODAB liposomes than the reverse, resulting in two populations of mixed DDAB/DODAB liposomes with distinctive phase behavior. Fluorescence measurements also show that the presence of a small amount of DODAB in DDAB-rich liposomes causes a pronounced effect in Nile Red emission, due to the increase in liposome size, as inferred from turbidity results.     

Conductivity of water-in-oil microemulsions stabilized by mixed surfactants

The electrical conductivity of D2O-in-n-heptane microemulsions stabilized by cationic/nonionic surfactant mixtures was studied as a function of D2O content, surfactant concentration, and surfactant mixture composition. The surfactants employed were cationic di-n-didodecyldimethylammonium bromide, DDAB, nonionic poly(oxyethylene) monododecyl ethers, C12EJ, with J=3-8 and 23, nonionic polymeric surfactants of the type PEO-PPO-PEO (Pluronic), and the reverse structure analogues (Pluronic R). Qualitative structural information was drawn from a comparison between the measured conductivity and that predicted by the charge fluctuation model for spherical droplets. The conductivity versus water content curves were found to be typical for water-in-oil systems composed of spherical droplets. From the effect of blending nonionic surfactant with DDAB on the measured conductivities, it was concluded that microemulsion conductivity is independent of the concentration of cationic surfactant (DDAB). This finding agrees well with theoretical microemulsion conductivity models.     

EFFECTS OF NH_4Cl ON THE INTERACTION BETWEEN POLY(ETHYLENE OXIDE) AND IONIC SURFACTANTS IN AQUEOUS SOLUTIONS

The interaction of poly(ethylene oxide)(PEO)with the ionic surfactants,sodium dodecylsulfate(SDS)and cetyltrimethylammonium chloride(CTAC)respectively,in aqueous solutions containing a certain concentration of NH_4Cl, is studied by the viscosity measurement.It has been found that the ion-dipole interaction between PEO and ionic surfactants is changed considerably by the organic salt.For anionic suffactant of SDS,the addition of NH_4Cl into solution strengthens the interaction between PEO and the headgrou...     

MOLECULAR CONFORMATION OF IONIC SURFACTANTS IN AQUEOUS SOLUTION

The molecular conformation of ionic surfactant in aqueous solution is investigated withfluorescent probes which are intrinsic insurfactant molecules or externally introduced. Quench-lng or pyrene monomer fluorescence by alkyltriphenylphosphonium or N-alkylpyridiniumobeys Stern-Voimer equation, being diffusi6n-controlled dynamic quenching, but the behaviorof quenching with different lengths of alkyl chain is "abnormal", i.e. the longer the chain,the greater the quenching rate constant. The pyrene excimer fluorescence is observed in theaqueous solution of cetyltrimethylammonium bromide (CTMAB), and the inhibition (for cationicquenchers) and promotion (for anionic quenchers) effects of CTMAB on the quenching ofpyrene fluorescence are also observed. The self-coiling conformation of ionic surfactantmolecules in aqueous solution is proposed to be responsible for these observations and theconformation to be dynamic.