β—环糊精与二茂铁包合物修饰碳糊电极上抗坏血酸的催？…

二茂铁及其衍生物不能牢固吸附于电极表面 ,特别是其氧化态 ( Fc+ )溶于水 ,影响了电极的稳定性 [1] .为解决这一问题 ,可采用合成有特殊官能团的二茂铁衍生物 [2 ] ,并利用 Nafion膜的双亲性将二茂铁固定于玻碳电极表面 [3]等方法 .这些方法制备的电极在使用过程中二茂铁仍会从电极表面缓慢流失 .我们利用二茂铁能与 β-环糊精形成 1∶ 1的包合物的性质[4] ,在乙二醇中制成了该包合物并掺杂于石墨粉中 ,用固体石蜡作粘合剂制成了 β-环糊精 -二茂铁包合物修饰碳糊电极 .首次把主客体包合物引入碳糊电极 ,大大改善了电极的性能 .该电极性能…     

二茂铁修饰碳黑微电极同时测定多巴胺和抗坏血酸

研究了神经递质多巴胺(DA)和抗坏血酸(AA)在二茂铁修饰碳黑微电极上的电化学行为。实验结果表明,在pH4.5的磷酸盐中,DA在该电极上的线性范围为2.0×10-6～4.0×10-3mol/L,检出限(3σ)为1.0×10-6mol/L;AA在该电极上的线性范围为6.0×10-6～1.0×10-3mol/L,检出限(3σ)为2.0×10-6mol/L;用这种电极可以同时测定多巴胺,抗坏血酸。     

乙酰二茂铁修饰碳糊电极测定废水中对氨基苯酚

利用线性扫描溶出伏安法研究了对氨基苯酚(PAP)在乙酰二茂铁修饰碳糊电极电化学行为。结果表明:在磷酸盐缓冲溶液(pH3.2)中,该修饰电极对PAP具有较好的催化活性,其峰电流与PAP浓度在7.0×10-7～3.0×10-5mol/L范围内呈线性关系,检出限为1.0×10-7mol/L(S/N=3)。利用该法测定了模拟水样中PAP的含量。     

二茂铁修饰石墨粉-环氧树脂固态电极测定对苯二酚

对苯二酚为一种多酚类化合物,广泛用作显影剂、抑制剂、抗氧化剂和合成染料的原料等,同时也是具有较大毒性的有机污染物。因此,在环境和化工过程中,痕量对苯二酚的检测显得十分重要。痕量对苯二酚常用分光光度法[1]、荧光分析[2]、液相色谱[3]等方法检测。由于对苯二酚在普通电     

二茂铁及其衍生物作为电化学传感器的研究进展

本文对近二十年来国内外对二茂铁及其衍生物作为电化学传感器的研究进展做了较全面的综述。主要讨论了二茂铁及其衍生物修饰电极的制备、表征,介绍了二茂铁及其衍生物作为电化学传感器的应用情况,并探讨了今后的研究方向。     

β-环糊精与二茂铁包合物修饰碳糊电极上抗坏血酸的催化氧化波研究

二茂铁及其衍生物不能牢固吸附于电极表面, 特别是其氧化态(Fc+)溶于水, 影响了电极的稳定性[1].     

甲苯胺蓝修饰电极的电化学性质及对抗坏血酸的测定

研究了甲苯胺蓝(TB)聚合膜修饰金电极的制备及其电化学性质,并用于抗坏血酸(AA)的测定。在pH 6.5的磷酸盐缓冲溶液中,AA在甲苯胺蓝修饰金电极上产生一灵敏的氧化峰,峰电流与AA的浓度在3.9×10-5~1.0×10-2mol/L范围内呈良好的线性关系,检出限为1.3×10-5mol/L。该电极重现性良好,已用于实际样品中AA的测定。     

Nafion-甲基紫精修饰电极抗坏血酸氧化酶生物传感器的研究

本文用Nafion-甲基紫精修饰电极为基底,以牛血清白蛋白和戊二醛为交联剂,将抗坏血酸氧化酶固定在电极上,制成修饰电极抗坏血酸氧化酶生物传感器。用这种生物传感器测定人体血清中抗坏血酸,线性范围在7.5×10~(-4)～7.5×10~(-7)mol/L之间,响应时间为5s,检测下限为2.5×10~(-7)mol/L。该传感器具有选择性好、灵敏度高和响应时间短等特点。     

聚吖啶红修饰玻碳电极在抗坏血酸共存时测定肾上腺素

研究了聚吖啶红修饰玻碳电极的制备及肾上腺素在此修饰电极上的电化学行为。在pH7.4的磷酸盐缓冲溶液中,肾上腺素在修饰电极上呈现3个峰,一个还原峰和两个氧化峰,其峰电位随着pH的增加而负移。肾上腺素浓度在1.0×10-6～1.0×10-4mol L的范围内与其氧化峰电流呈线性关系,回归方程为ip(10μA)=1.160 0.4390c(mol L),相关系数r=0.9981,检出限为1.0×10-7mol L。实验结果表明:该修饰电极能有效消除抗坏血酸的干扰,方法用于注射液中肾上腺素的检测,其回收率在93.7%～100.3%范围内。     

聚磺基水杨酸/碳纳米管修饰电极在抗坏血酸共存时测定多巴胺

研究了聚磺基水杨酸/多壁碳纳米管修饰玻碳电极的制备及多巴胺在此修饰电极上的电化学行为, 讨论了修饰条件、扫速、溶液 pH 以及抗坏血酸的干扰对多巴胺在这种复合物电极上响应的影响. 在 pH 7.4 磷酸盐缓冲溶液中, 在1.0×10-3 mol/L 抗坏血酸共存的条件下, 多巴胺氧化峰电流与其浓度在 5×10-7～10-4 mol/L 范围内分段呈线性关系, 检出限为 1.0×10-7 mol/L. 结果表明: 聚磺基水杨酸/多壁碳纳米管修饰电极结合了多壁碳纳米管灵敏度高和聚磺基水杨酸选择性好的优点, 可用于抗坏血酸共存条件下多巴胺的测定.     

四氰基醌二甲烷修饰碳糊电极电催化氧化测定抗坏血酸

本用四氰基醌二甲烷作价体，制成ＴＣＮＱ－碳糊电极，研究了该电极的性能。电极对水溶液中的抗坏血酸在较宽的ｐＨ和浓度范围内均有良好的电催化氧化作用，电极的稳定性良好，在ＡＨ２浓度５．０×１０＾－５－５．０×１０－２ｍｏｌ／Ｌ范围内，催化峰电流与ＡＨ２浓度呈线性关系，响应时间小于３０ｓ．     

Sensitive Voltammetric Determination of Captopril Using a Carbon Paste Electrode Modified with Nano-TiO2/Ferrocene Carboxylic Acid

A carbon paste electrode (CPE) modified with ferrocene carboxylic acid (FcCA) and TiO2 nanoparticles was constructed by incorporating TiO2 nanoparticles and ferrocene carboxylic acid into the carbon paste matrix.The electrochemical behavior of captopril (CAP) at the surface of the modified electrode was investigated using electroanalytical methods.The modified electrode showed excellent electrocatalytic activity for the oxidation of CAP in aqueous solutions at physiological pH values.Cyclic voltammetric curves showed that the oxidation of CAP at the surface of the modified electrode reduced its overpotential by more than 290 mV.The modified electrode was used for detecting captopril using cyclic voltammetry and square wave voltammetry techniques.A calibration curve in the range of 0.03 to 2400μmol/L was obtained that had a detection limit of 0.0096 μmol/L (3σ) under the optimized conditions.The modified electrode was successfully used for the determination of captopril in pharmaceutical and biological samples.     

Sensitive and Selective Determination of Phenylhydrazine in the Presence of Hydrazine at a Ferrocene Monocarboxylic Acid Modified Carbon Nanotube Paste Electrode

In the present paper, the use of a carbon paste electrode modified by ferrocene monocarboxylic acid (FMC) and carbon nanotubes prepared by a simple and rapid method was described. The modified electrode showed an excellent character for electrocatalytic oxidization of phenylhydrazine (PHZ) and hydrazine (HZ) with a 300 mV separation of both peaks. Differential pulse voltammetric peak currents of PHZ and HZ increased linearly with their concentrations at the range of 0.8 µM to 700 µM and 16 µM to 800 µM and the detection limits (3σ) were determined to be 0.42 µM and 14 µM, respectively.     

Selective Voltammetric Determination of Uric Acid in the Presence of Ascorbic Acid at Ordered Mesoporous Carbon Modified Electrodes

A novel chemically modified electrode was fabricated by immobilizing ordered mesoporous carbon (OMC) onto a glassy carbon (GC) electrode. The electrocatalytic behavior of the OMC modified electrode towards the oxidation of uric acid (UA) and ascorbic acid (AA) was studied. Compared to a glassy carbon electrode, the OMC modified electrode showed a faster electron transfer rate and reduced the overpotentials greatly. Furthermore, the OMC modified electrode resolved the overlapping voltammetric responses of UA and AA into two well‐defined voltammetric peaks with peak separation of ca. 0.38 V. All results show that the OMC modified electrode has a good electrocatalytic ability to UA and AA, and has an excellent response towards UA even in the presence of high concentration AA.     

A Novel Flexible Electrochemical Ascorbic Acid Sensor Constructed by Ferrocene Methanol doped Multi-walled Carbon Nanotube Yarn

An ascorbic acid (AA) electrochemical sensor was fabricated by ferrocene methanol (Fc−OH) modified multi-walled carbon nanotube yarn (CNTY). The prepared sensor (Fc−OH/CNTY) exhibited outstanding flexibility, highly stretchability, excellent bendability and obviously electrocatalytic activity for oxidation of ascorbic acid. The morphology of Fc−OH/CNTY was evaluated by scanning electron microscope. The electrochemical behaviour of Fc−OH/CNTY sensor was studied by cyclic voltammetry and amperometry measurements. Moreover, the influence of Fc−OH concentration, applied potential and electrolyte solution pH were also investigated to obtain the best sensor performance. The prepared sensor exhibited a wide linear range from 3 μM to 3.0 mM toward AA, and a detection limit of 1.32 μM (S/N=3). It also possessed a good lifetime and a fast response speed (2.83 s). In addition, the Fc−OH/CNTY sensor remained 90 % and 60 % of its initial activity after 100 and 500 times bending, respectively, which indicated a potential application on flexible, implantable and/or wearable electrochemical sensors.     

聚伊文思蓝修饰电极对多巴胺和抗坏血酸的电分离及同时测定

研究多巴胺(DA)和抗坏血酸(AA)在聚伊文思蓝(Evans Blue)修饰电极上的伏安行为,建立差示脉冲伏安测定法.在pH4.5磷酸盐缓冲液中,聚伊文思蓝修饰电极对DA和AA有显著的增敏和电分离作用.DA和AA氧化峰电流与浓度分别在1.0×10-6~3.0×10-5mol/L和5.0×10-6~1.05×10-4mol/L范围内呈良好的线性关系,检测限分别为2.5×10-7mol/L和3.0×10-7mol/L.当DA与AA共存时,由该修饰电极检测的二者氧化峰电位差达184 mV,故可同时测定DA和AA,并有效消除其它组分对DA测定的干扰,已用于实际样品中DA和AA含量的测定,结果令人满意.     

A Multiwall Carbon Nanotube-chitosan Modified Electrode for Selective Detection of Dopamine in the Presence of Ascorbic Acid

A novel multiwall carbon nanotube-chitosan modified electrode has been prepared. The modified electrode resolves the overlapping voltammetric response of dopamine and ascorbic acid into two well-defined peak by 212 mV. The mechanism of discrimination of dopamine from ascorbic acid is discussed. Dopamine can be determined selectively with the carbon nanotube-chitosan modified electrode. The electrode shows good sensitivity, selectivity and stability.     

单分子层γ-氨基丁酸共价修饰玻碳电极同时测定多巴胺、尿酸和抗坏血酸

采用电氧化法制备了一种新型γ-氨基丁酸(ABA)修饰的玻碳电极.X射线光电子能谱(XPS)和循环伏安法研究表明,ABA以单分子层状态以C—N键牢固地共价键合在电极表面.该修饰电极对多巴胺(DA)、尿酸(UA)和抗坏血酸(AA)都具有良好的电化学催化特性.在pH=7.0磷酸缓冲溶液中,DA,UA和AA分别于0.45,0.25和0.07V(vs.Ag/AgCl)有一个良好的、独立的阳极方波伏安峰,表明此修饰电极可用于这3种物质的同时测定.与DA,UA和AA的方波伏安峰电流呈线性关系的浓度范围分别为4.0～400,2.0～500和1.0～600μmol/L,检测限(3δ)分别为1.6,1.2和0.8μmol/L.该修饰电极具有良好的灵敏度、选择性和稳定性,并具有抗污染能力.     

聚亚甲基蓝修饰金电极对过量抗坏血酸存在下尿酸的测定

研究了亚甲基蓝(MB)聚合物膜修饰金电极(PMB/Au)的电化学行为,通过电化学阻抗谱图对其进行了表征,并研究了抗坏血酸(AA)和尿酸(UA)在PMB/Au上的电化学行为.研究结果表明,在PBS水溶液中AA和UA在PMB/Au上的氧化峰电位均负移,峰电流增大,表明PMB/Au对AA和UA电化学氧化反应均产生了催化作用.微分脉冲伏安法(DPV)研究结果表明,在AA和UA共存体系中,AA和UA的氧化峰电位相差约430 mV．以此建立了AA和UA的电化学选择性测定方法.在1.0 mmol·L-1AA共存体系中UA氧化峰电流与其浓度在5.0×10-6～8.0 × 10-3mol·L-1范围内呈良好的线性关系.在500倍AA共存时UA检出限为1.0 靘μmol·L-1,PMB/Au可直接应用于人体尿样中UA的测定,结果令人满意.