共查询到20条相似文献,搜索用时 31 毫秒
1.
A single cell electroporation chip 总被引:2,自引:0,他引:2
Increasing the cell membrane's permeability can be accomplished via single cell electroporation. Polar substances that cannot otherwise permeate the plasma membrane (such as dyes, drugs, DNA, proteins, peptides, and amino acids) can thus be introduced into the cell. We developed a polymeric chip that can selectively immobilize and locally electroporate single cells. This easy-to-use chip focuses the electric field, eliminating the need to manipulate electrodes or glass pipettes. Moreover, this device allows parallel single cell electroporation. We demonstrate the effectiveness of our device design by electroporating HeLa cells using low applied voltages (< 1 V). We found the average transmembrane potential required for electroporation of HeLa cells to be 0.51 +/- 0.13 V. Membrane permeation is assessed electrically by measuring characteristic 'jumps' in current that correspond to drops in cell resistance, and microscopically by recording either the escape of cytoplasmic dye Calcein AM or the entrance of Trypan blue stain. 相似文献
2.
We report a reliable strategy to perform automated image cytometry of single (non-adherent) stem cells captured in microfluidic traps. The method rapidly segments images of an entire microfluidic chip based on the detection of horizontal edges of microfluidic channels, from where the position of the trapped cells can be derived and the trapped cells identified with very high precision (>97%). We used this method to successfully quantify the efficiency and spatial distribution of single-cell loading of a microfluidic chip comprised of 2048 single-cell traps. Furthermore, cytometric analysis of trapped primary hematopoietic stem cells (HSC) faithfully recapitulated the distribution of cells in the G1 and S/G2-M phase of the cell cycle that was measured by flow cytometry. This approach should be applicable to automatically track single live cells in a wealth of microfluidic systems. 相似文献
3.
Zhen Zhu Olivier Frey Felix Franke Niels Haandbæk Andreas Hierlemann 《Analytical and bioanalytical chemistry》2014,406(27):7015-7025
We present a microfluidic device, which enables single cells to be reliably trapped and cultivated while simultaneously being monitored by means of multifrequency electrical impedance spectroscopy (EIS) in the frequency range of 10 kHz–10 MHz. Polystyrene beads were employed to characterize the EIS performance inside the microfluidic device. The results demonstrate that EIS yields a low coefficient of variation in measuring the diameters of captured beads (~0.13 %). Budding yeast, Saccharomyces cerevisiae, was afterwards used as model organism. Single yeast cells were immobilized and measured by means of EIS. The bud growth was monitored through EIS at a temporal resolution of 1 min. The size increment of the bud, which is difficult to determine optically within a short time period, can be clearly detected through EIS signals. The impedance measurements also reflect the changes in position or motion of single yeast cells in the trap. By analyzing the multifrequency EIS data, cell motion could be qualitatively discerned from bud growth. The results demonstrate that single-cell EIS can be used to monitor cell growth, while also detecting potential cell motion in real-time and label-free approach, and that EIS constitutes a sensitive tool for dynamic single-cell analysis. Figure
? 相似文献
4.
By using electro-optical and dielectric absorption [1–4] measurements, we report our investigations of ionic effects on electro-optics and residual direct current voltages (VrDCs) of two polyimide (PI)-aligned twisted nematic (TN) cells with same liquid crystal mixture but different PI-alignment materials. We have also carried out new experimental methods to find out that the observed VrDCs were caused by LC-PI-interfacial trapped ions generated and transported from the LC medium for one TN cell, and from the PI layers for the other TN cell. Our measured VrDCs indicated that the former had two different exponential-decay rates similar to the published results by M. Mizusaki et al. [2] but the latter had only a single exponential-decay rate. 相似文献
5.
Park K Jang J Irimia D Sturgis J Lee J Robinson JP Toner M Bashir R 《Lab on a chip》2008,8(7):1034-1041
The size of a cell is a fundamental physiological property and is closely regulated by various environmental and genetic factors. Optical or confocal microscopy can be used to measure the dimensions of adherent cells, and Coulter counter or flow cytometry (forward scattering light intensity) can be used to estimate the volume of single cells in a flow. Although these methods could be used to obtain the mass of single live cells, no method suitable for directly measuring the mass of single adherent cells without detaching them from the surface is currently available. We report the design, fabrication, and testing of 'living cantilever arrays', an approach to measure the mass of single adherent live cells in fluid using silicon cantilever mass sensor. HeLa cells were injected into microfluidic channels with a linear array of functionalized silicon cantilevers and the cells were subsequently captured on the cantilevers with positive dielectrophoresis. The captured cells were then cultured on the cantilevers in a microfluidic environment and the resonant frequencies of the cantilevers were measured. The mass of a single HeLa cell was extracted from the resonance frequency shift of the cantilever and was found to be close to the mass value calculated from the cell density from the literature and the cell volume obtained from confocal microscopy. This approach can provide a new method for mass measurement of a single adherent cell in its physiological condition in a non-invasive manner, as well as optical observations of the same cell. We believe this technology would be very valuable for single cell time-course studies of adherent live cells. 相似文献
6.
We present an automated dielectrophoretic assisted cell sorting (DACS) device for dielectric characterization and isolation of neural cells. Dielectrophoretic (DEP) principles are often used to develop cell sorting techniques. Here we report the first statistically significant neuronal sorting using DACS to enrich neurons from a heterogeneous population of mouse derived neural stem/progenitor cells (NSPCs) and neurons. We also study the dielectric dispersions within a heterogeneous cell population using a Monte-Carlo (MC) simulation. This simulation model explains the trapping behavior of populations as a function of frequency and predicts sorting efficiencies. The platform consists of a DEP electrode array with three multiplexed trapping regions that can be independently activated at different frequencies. A novel microfluidic manifold enables cell sorting by trapping and collecting cells at discrete frequency bands rather than single frequencies. The device is used to first determine the percentage of cells trapped at these frequency bands. With this characterization and the MC simulation we choose the optimal parameters for neuronal sorting. Cell sorting experiments presented achieve a 1.4-fold neuronal enrichment as predicted by our model. 相似文献
7.
Chen Z Xie S Shen L Du Y He S Li Q Liang Z Meng X Li B Xu X Ma H Huang Y Shao Y 《The Analyst》2008,133(9):1221-1228
The interactions between Hela cells and silver nanoparticles (AgNPs) have been studied by scanning electrochemical microscopy (SECM) with both IrCl(6)(2-/3-) and Fe(CN)(6)(3-/4-) as the dual mediators. IrCl(6)(2-), which can be produced in situ and react with AgNPs, is used as the mediator between the AgNPs on the cells and the SECM tip. Another redox couple, Fe(CN)(6)(3-/4-), which has a similar hydrophilicity to IrCl(6)(2-/3-), but cannot react with AgNPs, is also employed for the contrast experiments. The cell array is cultured successfully onto a Petri dish by microcontact printing (muCP) technique, which can provide a basic platform for studying of single cells. The approach curve and line scan are the two methods of SECM employed here to study the Hela cells. The former can provide the information about the interaction between Hela cells and AgNPs whereas the later gives the cell imaging. The permeability of cell membranes and morphology are two main factors which have effects on the feedback mode signals when K(3)Fe(CN)(6) is used as the mediator. The permeability of the cell membranes can be ignored after interaction with high concentration of AgNP solution and the height of the Hela cells is slightly decreased in this process. The kinetic rate constants (k(0)) between IrCl(6)(2-) and Ag on the Hela cell can be evaluated using K(3)IrCl(6) as the mediator, and they are increased with the higher concentrations of the AgNP solutions. The k(0) is changed about 10 times from 0.43 +/- 0.04 x 10(-4) to 1.25 +/- 0.07 x 10(-4) and to 3.93 +/- 1.9 x 10(-4) cm s(-1) corresponding to 0, 1 and 5 mM of AgNO(3) solution. The experimental results demonstrate that the AgNPs can be adsorbed on the cell surface and detected by SECM. Thus, the amount of AgNPs adsorbed on cell membranes and the permeability or morphology changes can be investigated simultaneously using this approach. The dual mediator system and cell array fabricated by muCP technique can provide better reproducibility because they can simplify experiments, and provide a platform for further single cell detection. 相似文献
8.
We present a new method to locally apply mechanical tensile and compressive force on single cells based on integration of a microfluidic device with an optical laser tweezers. This system can locate a single cell within customized wells exposing a square-like membrane segment to a functionalized bead. Beads are coated with extracellular matrix (ECM) proteins of interest (e.g. fibronectin) to activate specific membrane receptors (e.g. integrins). The functionalized beads are trapped and manipulated by optical tweezers to apply mechanical load on the ECM-integrin-cytoskeleton linkage. Activation of the receptor is visualized by accumulation of expressed fluorescent proteins. This platform facilitates isolation of single cells and excitation by tensile/compressive forces applied directly to the focal adhesion via specific membrane receptors. Protein assembly or recruitment in a focal adhesion can then be monitored and identified using fluorescent imaging. This platform is used to study the recruitment of vinculin upon the application of external tensile force to single endothelial cells. Vinculin appears to be recruited above the forced bead as an elliptical cloud, centered 2.1 ± 0.5 μm from the 2 μm bead center. The mechanical stiffness of the membrane patch inferred from this measurement is 42.9 ± 6.4 pN μm(-1) for a 5 μm × 5 μm membrane segment. This method provides a foundation for further studies of mechanotransduction and tensile stiffness of single cells. 相似文献
9.
Measurements of mechanical properties of biological cells are of great importance because changes in these properties can be strongly associated with the progression of cell differentiation and cell diseases. Although state of the art methods, such as atomic force microscopy, optical tweezers and micropipette aspiration, have been widely used to measure the mechanical properties of biological cells, all these methods involve direct contact with the cell and the measurements could be affected by the contact or any local deformation. In addition, all these methods typically deduced the Young's modulus of the cells based on their measurements. Herein, we report a new method for fast and direct measurement of the compressibility or bulk modulus of various cell lines on a microchip. In this method, the whole cell is exposed to acoustic radiation force without any direct contact. The method exploits the formation of an acoustic standing wave within a straight microchannel. When the polystyrene beads and cells are introduced into the channel, the acoustic radiation force moves them to the acoustic pressure node and the movement speed is dependent on the compressibility. By fitting the experimental and theoretical trajectories of the beads and the cells, the compressibility of the cells can be obtained. We find that the compressibility of various cancer cells (MCF-7: 4.22 ± 0.19 × 10(-10) Pa(-1), HEPG2: 4.28 ± 0.12 × 10(-10) Pa(-1), HT-29: 4.04 ± 0.16 × 10(-10) Pa(-1)) is higher than that of normal breast cells (3.77 ± 0.09 × 10(-10) Pa(-1)) and fibroblast cells (3.78 ± 0.17 × 10(-10) Pa(-1)). This work demonstrates a novel acoustic-based method for on-chip measurements of cell compressibility, complementing existing methods for measuring the mechanical properties of biological cells. 相似文献
10.
This work presents the size-selective sorting of single biological cells using the assembly process known as templated assembly by selective removal (TASR). We have demonstrated experimentally, for the first time, the selective placement and sorting of single SF9 cells (clonal isolate derived from Spodoptera frugiperda (Fall Armyworm) IPLB-Sf21-AE cells) into patterned hemispherical sites on rigid assembly templates using TASR. Nearly 100% of the assembly sites on the template were filled with matching cells (with assembly density as high as 900 sites per mm(2)) within short time spans of 3 minutes. 3-D reconstruction of cell profiles and volume analysis of cells trapped inside assembly sites demonstrates that only those cells that match the assembly site precisely (within 0.5 μm) in size are assembled on the template. The assembly conditions are also compatible with the extension of TASR to mammalian cells. TASR-based size-selective structuring and sorting of biological systems represents a valuable tool with potential for implementation in biological applications such as cell sorting for medical research or diagnostics, templating for artificial tissue replication, or isolation of single cells for the study of biological or mechanical behavior. 相似文献
11.
This paper describes the synthesis and loading of silica and polystyrene-acrylic based nanocapsules with small molecules. The nanocapsules are used for delivering defined packages of stimuli to single cells with both high spatial and temporal resolutions. To introduce molecules into the capsules, we characterized two approaches. The first approach is based on a base-swell process in which the shell of the capsule is swelled so small molecules can diffuse into the interior of the capsule and be trapped inside once the capsules are de-swelled. The second approach is based on a dry-swell-dry process in which the solution containing the molecules of interest and the nanocapsules is physically dried to promote more molecules to enter into the interior of the capsule. We characterized both methods by monitoring the content of and the release from individual capsules with confocal microscopy and wide-field imaging. To illustrate the biological applications of such nanocapsules, we used optical trapping to position a single carbachol-loaded capsule adjacent to a single CHO cell that has been transfected with muscarinic acetylcholine (M1) receptors, released the carbachol from the capsule with a single 3-ns N2 laser pulse, and then monitored the subsequent intracellular signaling triggered by the binding of carbachol to the M1 receptors. 相似文献
12.
Valero A Post JN van Nieuwkasteele JW Ter Braak PM Kruijer W van den Berg A 《Lab on a chip》2008,8(1):62-67
There is great interest in genetic modification of bone marrow-derived mesenchymal stem cells (MSC), not only for research purposes but also for use in (autologous) patient-derived-patient-used transplantations. A major drawback of bulk methods for genetic modifications of (stem) cells, like bulk-electroporation, is its limited yield of DNA transfection (typically then 10%). This is even more limited when cells are present at very low numbers, as is the case for stem cells. Here we present an alternative technology to transfect cells with high efficiency (>75%), based on single cell electroporation in a microfluidic device. In a first experiment we show that we can successfully transport propidium iodide (PI) into single mouse myoblastic C2C12 cells. Subsequently, we show the use of this microfluidic device to perform successful electroporation of single mouse myoblastic C2C12 cells and single human MSC with vector DNA encoding a green fluorescent-erk1 fusion protein (EGFP-ERK1 (MAPK3)). Finally, we performed electroporation in combination with live imaging of protein expression and dynamics in response to extracellular stimuli, by fibroblast growth factor (FGF-2). We observed nuclear translocation of EGFP-ERK1 in both cell types within 15 min after FGF-2 stimulation. Due to the successful and promising results, we predict that microfluidic devices can be used for highly efficient small-scale 'genetic modification' of cells, and biological experimentation, offering possibilities to study cellular processes at the single cell level. Future applications might be small-scale production of cells for therapeutic application under controlled conditions. 相似文献
13.
Optical microscopy of single bacteria growing on solid agarose support is a powerful method for studying the natural heterogeneity in growth and gene expression. While the material properties of agarose make it an excellent substrate for such studies, the sheer number of exponentially growing cells eventually overwhelms the agarose pad, which fundamentally limits the duration and the throughput of measurements. Here we overcome the limitations of exponential growth by patterning agarose pads on the sub-micron-scale. Linear tracks constrain the growth of bacteria into a high density array of linear micro-colonies. Buffer flow through microfluidic lines washes away excess cells and delivers fresh nutrient buffer. Densely patterned tracks allow us to cultivate and image hundreds of thousands of cells on a single agarose pad over 30-40 generations, which drastically increases single-cell measurement throughput. In addition, we show that patterned agarose can facilitate single-cell measurements within bacterial communities. As a proof-of-principle, we study a community of E. coli auxotrophs that can complement the amino acid deficiencies of one another. We find that the growth rate of colonies of one strain decreases sharply with the distance to colonies of the complementary strain over distances of only a few cell lengths. Because patterned agarose pads maintain cells in a chemostatic environment in which every cell can be imaged, we term our device the single-cell chemostat. High-throughput measurements of single cells growing chemostatically should greatly facilitate the study of a variety of microbial behaviours. 相似文献
14.
Sun W Fang N Trewyn BG Tsunoda M Slowing II Lin VS Yeung ES 《Analytical and bioanalytical chemistry》2008,391(6):2119-2125
The unique structural features of mesoporous silica nanoparticles (MSN) have made them very useful in biological applications,
such as gene therapy and drug delivery. Flow cytometry, confocal microscopy, and electron microscopy have been used for observing
the endocytosis of MSN. However, flow cytometry cannot directly observe the process of endocytosis. Confocal microscopy requires
fluorescence labeling of the cells. Electron microscopy can only utilize fixed cells. In the present work, we demonstrate
for the first time that differential interference contrast (DIC) microscopy can be used to observe the entire endocytosis
process of MSN into living human lung cancer cells (A549) without fluorescence staining. There are three physical observables
that characterize the locations of MSN and the stages of the endocytosis process: motion, shape, and vertical position. When
it was outside the cell, the MSN underwent significant Brownian motion in the cell growth medium. When it was trapped on the
cell membrane, the motion of the MSN was greatly limited. After the MSN had entered the cell, it resumed motion at a much
slower speed because the cytoplasm is more viscous than the cell growth medium and the cellular cytoskeleton networks act
as obstacles. Moreover, there were shape changes around the MSN due to the formation of a vesicle after the MSN had been trapped
on the cell membrane and prior to entry into the cell. Finally, by coupling a motorized vertical stage to the DIC microscope,
we recorded the location of the MSN in three dimensions. Such accurate 3D particle tracking ability in living cells is essential
for studies of selectively targeted drug delivery based on endocytosis. 相似文献
15.
The measurement of local oxygen level in 3D cell culture is desired but remains as a challenge problem. We developed a 3D cell scaffold with luminescence-based oxygen sensing capability that opens the possibility of 3D mapping of oxygen level during cell growth. Hydrogel inverted opal scaffold was prepared by photo-polymerization of poly(2-hydroxyethyl methacrylate (pHEMA) and poly(methacryloyloxy)ethyl-trimethylammonium chloride (pMEATAC) monomer using close-packed bead assembly as template. Tris(4,7-diphenyl-1,10-phenanthroline)ruthenium chloride (Ru(dpp)(3)), was coated on the pHEMA-pMEATAC 3D scaffolds by layer-by-layer (LBL) assembly. pHEMA-pMEATAC copolymer was coated on top of the Ru(dpp)(3) layer as a protection layer. The fluorescence emission of Ru(dpp)(3) can be dynamically quenched by oxygen. By measuring the emission intensity of the scaffold, the local oxygen level can be monitored. The hydrogel scaffolds are transparent, and thus 3D fluorescence intensity can be mapped by confocal microscopy. Human bone marrow stromal cells HS-5 were successfully cultured on the oxygen sensing scaffold, and the observed Ru(dpp)(3) emission intensity from the scaffold was stronger in cell rich area, which indicates a lower oxygen level due to the consumption of the cells. 相似文献
16.
We present a microfluidic device that enables the determination of intracellular biomolecules in multiple single cells. The cells are individually trapped and isolated in a microchamber array. Since the microchambers can be opened and closed reversibly, the cells can be exposed to different solutions sequentially, e.g. for incubation, washing steps, labelling and finally, for lysis. The tightly sealed microchambers enable the retention and analysis of cell lysate derived from single cells. The performance of the device is demonstrated by monitoring the levels of the cofactors NADPH and NADH both in healthy mammalian cells and in cells exposed to oxidative stress. The platform was also used to determine the toxic impact of the alkaloid camptothecin on the intracellular enzyme glucose-6-phosphate dehydrogenase levels. In general, the device is applicable for the analysis of cell auto-stimulation and the detection of intracellular metabolite concentration or expression levels of proteins. 相似文献
17.
Monitoring the real-time behavior of spatial arrays of single living bacteria cells is only achieved with much experimental difficulty due to the small size and mobility of the cells. To address this problem, we have designed and constructed a simple microfluidic device capable of trapping single bacteria cells in spatially well-defined locations without the use of chemical surface treatments. The device exploits hydrodynamics to slow down and trap cells flowing near a narrow aperture. We have modeled this system numerically by approximating the motion of Escherichia coli cells as rigid 3-D ellipsoids. The numerical predictions for the speed and efficiency of trapping were tested by fabricating the devices and imaging GFP expressing E. coli at a high spatio-temporal resolution. We find that our numerical simulations agree well with the actual cell flow for varying trap geometries. The trapped cells are optically accessible, and combined with our ability to predict their spatial location we demonstrate the ease of this method for monitoring multiple single cells over a time course. The simplicity of the design, inexpensive materials and straightforward fabrication make it an accessible tool for any systems biology laboratory. 相似文献
18.
Analysis of genetic and functional variability in populations of living cells requires experimental techniques capable of monitoring cellular processes such as cell signaling of many single cells in parallel while offering the possibility to sort interesting cell phenotypes for further investigations. Although flow cytometry is able to sequentially probe and sort thousands of cells per second, dynamic processes cannot be experimentally accessed on single cells due to the sub-second sampling time. Cellular dynamics can be measured by image cytometry of surface-immobilized cells, however, cell sorting is complicated under these conditions due to cell attachment. We here developed a cytometric tool based on refractive multiple optical tweezers combined with microfluidics and optical microscopy. We demonstrate contact-free immobilization of more than 200 yeast cells into a high-density array of optical traps in a microfluidic chip. The cell array could be moved to specific locations of the chip enabling us to expose in a controlled manner the cells to reagents and to analyze the responses of individual cells in a highly parallel format using fluorescence microscopy. We further established a method to sort single cells within the microfluidic device using an additional steerable optical trap. Ratiometric fluorescence imaging of intracellular pH of trapped yeast cells allowed us on the one hand to measure the effect of the trapping laser on the cells' viability and on the other hand to probe the dynamic response of the cells upon glucose sensing. 相似文献
19.
Zhenyu Wang Xiaojuan Zhang Jun Yang Zhong Yang Xiaoping Wan Ning Hu Xiaolin Zheng 《Analytica chimica acta》2013
A large number of microscale structures have been used to elaborate flowing control or complex biological and chemical reaction on microfluidic chips. However, it is still inconvenient to fabricate microstructures with different heights (or depths) on the same substrate. These kinds of microstructures can be fabricated by using the photolithography and wet-etching method step by step, but involves time-consuming design and fabrication process, as well as complicated alignment of different masters. In addition, few existing methods can be used to perform fabrication within enclosed microfluidic networks. It is also difficult to change or remove existing microstructures within these networks. In this study, a magnetic-beads-based approach is presented to build microstructures in enclosed microfluidic networks. Electromagnetic field generated by microfabricated conducting wires (coils) is used to manipulate and trap magnetic beads on the bottom surface of a microchannel. These trapped beads are accumulated to form a microscale pile with desired shape, which can adjust liquid flow, dock cells, modify surface, and do some other things as those fabricated microstructures. Once the electromagnetic field is changed, trapped beads may form new shapes or be removed by a liquid flow. Besides being used in microfabrication, this magnetic-beads-based method can be used for novel microfluidic manipulation. It has been validated by forming microscale dam structure for cell docking and modified surface for cell patterning, as well as guiding the growth of neurons. 相似文献
20.
Elzbieta Jastrzebska Sylwia Flis Aleksandra Rakowska Michal Chudy Zenon Jastrzebski Artur Dybko Zbigniew Brzozka 《Mikrochimica acta》2013,180(9-10):895-901
We have investigated the response of normal and cancer cells to exposure a combination of celecoxib (Celbx) and 5-fluorouracil (5-FU) using a lab-on-a-chip microfluidic device. Specifically, we have tested the cytotoxic effect of Celbx on normal mouse embryo cells (Balb/c 3T3) and human lung carcinoma cells (A549). The single drugs or their combinations were adjusted to five different concentrations using a concentration gradient generator (CGG) in a single step. The results suggest that Celbx can enhanced the anticancer activity of 5-FU by stronger inhibition of cancer cell growth. We also show that the A549 cancer cells are more sensitive to Celbx than the Balb/c 3T3 normal cells. The results obtained with the microfluidic system were compared to those obtained with a macroscale in vitro cell culture method. In our opinion, the microfluidic system represents a unique approach for an evaluation of cellular response to multidrug exposure that also is more simple than respective microwell plate assays. Figure
? 相似文献