Micro-pumping flow system for spectrophotometric determination of anionic surfactants in water

A novel procedure has been developed for spectrophotometric determination of anionic surfactants in water using a solenoid micro-pump as fluid-propulsion device. The proposed method is based on substitution of methyl orange (MO) by anionic surfactants in the formation of an ion-pair with the cetyl pyridine ion (CPC⁺) at pH 5.0. The flow network comprised four solenoid micro-pumps which, under microcomputer control, enabled sample and reagent introduction, and homogenisation in the reaction zone. The system is flexible and simple to operate and control, and sensitive and precise. The analytical plot for the anionic surfactant was linear between 1.43×10^–6 and 1.43×10^–5 mol L^–1 (0.5 to 5.0 mg L^–1; R=0.997, n=5). The relative standard deviation was 0.8% (n=11) for a sample containing 5.74×10^–6 mol L^–1 (2 mg L^–1) surfactant. The limit of detection was 9.76×10^–8 mol L^–1 (0.034 mg L^–1) and the sampling throughput was 60 determinations per hour. The results obtained for washing-water samples were comparable with those obtained by use of the reference method, and no significant differences at the 95% confidence level were observed.     

Some N-alkyl-naphthylazo pyridinium salts as new reagents for the spectrophotometric determination of anionic surfactants

Summary Eleven pyridinium azo dyes with straight-chain alkyl groups C_nH_2n+1–(n=6–18) and bromoalkyl groups BrC_mH_2m–(m=6–12) were synthesized with the intention of developing reagents for the determination of low levels of anionic surfactants in an aqueous medium. The effect of the alkyl chain length of these reagents on the reactivity with anionic surfactants such as sodium dodecylsulphate (SDS), sodium linear-dodecylbenzenesulphonate (DBS), sodium dodecylsulphonate (DS) and sodium laurate (SL) was studied. It was found that the alkyl chain length played an important role in the formation of ion associates and the composition of the ion associates formed. These reagents were classified into four groups with respect to the reactivity with anionic surfactants. The first group (n,m=6) reacts only with DBS. The second group (n,m=8) reacts with SDS, DBS and DS. The third group (n,m=10, 12) reacts with SDS, DBS and DS; however, the colour intensity of the DBS-ion associate was unstable. The fourth group (n=14, 16, 18) reacts with all anionic surfactants examined, and the composition of the ion associates with SDS and DS was 2:1 ([reagent]/[surfactant]) though that of the ion associates of the three reagent groups mentioned above was 1:1. The optimal conditions for the determination of anionic surfactants in river water with 1-octyl-4-(4-aminonaphthylazo)-pyridinium bromide was examined. The calibration graph was linear up to 3×10^–6 mol/l, and the apparent molar absorptivity of the ion associate was 3.8×10⁴ l mol^–1 cm^–1 (at 427 nm). The relative standard deviation for 2.4×10^–6 mol/l SDS was 4.9%. Recoveries of 88–107% were found for 8.0×10^–7 mol/l SDS in river water samples.     

Spectrophotometric determination of anionic surfactants in tap and river waters with 1-(10-bromodecyl)-4-(4-aminonaphthylazo)-pyrimidinium bromide

Summary A new cationic dye, 1-(10-bromodecyl)-4-(4-aminonaphthylazo)-pyridinium bromide, was synthesized and evaluated as a new reagent for the determination of anionic surfactants. The reagent reacts with anionic surfactants, such as sodium dodecylsulphate and sodium dodecylbenzenesulphonate, to produce an ion associate in an aqueous medium. The colour change occurs simultaneously, and the colour development is very stable. This makes it possible to determine anionic surfactants directly by spectrophotometry without solvent extraction. The stoichiometric ratio of the ion associate was found to be 1:1 by the mole ratio method. The calibration graph was linear up to 2.5×10^–6 mol/l. The apparent molar absorptivity of the ion associate was 5.3×10⁴ l mol^–1 cm^–1 (at 595 nm). The relative standard deviation (n=10) for 1.2×10^–6 mol/l sodium dodecylsulphate was 4.9%. The proposed method was applied to the determination of anionic surfactants in tap and river waters.     

Determination of thallium in the presence of large excess of lead by anodic stripping voltammetry

The paper is concerned with the determination of traces of thallium, as T1(I), in the presence of very large amounts of lead, by d.c. anodic stripping voltammetry, by adding both a complexing agent and anionic surfactant. The supporting complexing agent was 0.1M solution of EDTA (pH 4.4). The influence of the several surfactants on the signals of lead and thallium was investigated.In 0.1M EDTA at pH 4.4 at the absence of a surfactant, lead does not interfere at concentrations below 10^–4 M. When the electrolyte contains also an anionic surfactant, lead can be tolerated at concentrations up to 2 × 10^–3–6 × 10^–3 M (depending on the type of the surfactant), and the height of the thallium peak remains unaffected. This makes the determination of 10^–8 M T1(I) possible when the molar excess of lead is 2–6 × 10⁵ fold. The method has been tested by determining the thallium content of soil extracts.     

Spectrophotometric determination of cationic and anionic surfactants with anionic dyes in the presence of nonionic surfactants,part I: A general aspect

The behavior of color development of anionic azo dyes, methyl orange and its analogues, was examined in aqueous media by changing the microenvironment of the dyes. The addition of alcohols, organic onium ions, anionic surfactants and nonionic surfactants brought about a decrease of the band at wavelengths near 480 nm and an increase of the band at wavelengths near 420 nm. Such a shift toward the shorter wavelengths in spectra was attributed to the change of the micro-environment around the dyes from a polar field to a less polar field; that is, the shift is caused by the change of the contribution of the following resonance forms, On the basis of the color change phenomena, the spectrophotometric methods for the determination of organic onium ions and anionic surfactants were proposed.     

Cobalt phthalocyanine as a novel molecular recognition reagent for batch and flow injection potentiometric and spectrophotometric determination of anionic surfactants

Cobalt(II) phthalocyanine [Co(II)Pc] is used as both an ionophore and chromogen for batch and flow injection potentiometric and spectrophotometric determination of anionic surfactants (SDS), respectively. The potentiometric technique involves preparation of a polymeric membrane sensor by dispersing [Co(II)Pc] in a plasticized PVC membrane. Under batch mode of operation, the sensor displays a near-Nernstian slope of −56.5 mV decade⁻¹, wide response linear range of 7.8 × 10⁻⁴ to 8.0 × 10⁻⁷ mol L⁻¹, lower detection limit of 2.5 × 10⁻⁷ mol L⁻¹ and exhibits high selectivity for anionic surfactants in the presence of many common ions. Under hydrodynamic mode of operation (FIA), the slope of the calibration plot, limit of detection, and working linear range are −51.1 mV decade⁻¹, 5.6 × 10⁻⁷ and 1.0 × 10⁻³ to 1.0 × 10⁻⁶ mol L⁻¹, respectively. The spectrophotometric method is based on the use of [Co(II)Pc] solution in dimethylsulfoxide (DMSO) as a chromogenic reagent. The maximum absorption of the reagent at 658 nm linearly decreases with the increase of anionic surfactant over the concentration range 2-30 μg mL⁻¹. The lower limit of detection is 1 μg mL⁻¹ and high concentrations of many interfering ions are tolerated. Flow injection spectrophotometric measurements are carried out by injection of the surfactant test solution in a stream of the reagent in DMSO. The sample throughput, working range and lower detection limit are 25-30 samples h⁻¹, 4-60 and 2 μg mL⁻¹, respectively. The potentiometric and spectrophotometric techniques are applied to the batch and flow injection measurements of anionic surfactants in some commercial detergent products. The results agree fairly well with data obtained using the standard methylene blue spectrophotometric method.     

Flow injection determination of cationic surfactants by using N-bromosuccinimide and N-chlorosuccinimide as new oxidizing agents for luminol chemiluminescence

Two highly sensitive chemiluminescence (CL) systems are described. The method is based on the CL generated during the oxidation of luminol by N-bromosuccinimide (NBS) and N-chlorosuccinimide (NCS) in alkaline medium. The emission intensity is reduced by the presence of some surfactants at concentrations lower than critical micelle concentration (cmc).A new, simple, rapid and selective flow injection CL method for the determination of cationic surfactants such as dodecyltrimethylammonium bromide (DTAB), cetyltrimethylammonium bromide (CTAB) and cetylpyridinium chloride (CPC) is proposed. Their determinations are based on the reducing effect on the emission intensity of NBS-luminol and NCS-luminol chemiluminescent reactions. The effect of analytical and flow injection analysis (FIA) variables on these CL systems and on the determination of the cationic surfactants are discussed. The optimum parameters for the determination of cationic surfactants were studied and were found to be the following: luminol, 1×10⁻⁶ M; NBS and NCS both, 5×10⁻² M; NaOH, 5×10⁻² M and flow rate, 3.5 ml min⁻¹.     

Adsorption–Photometric Determination of Cationic Surfactant Traces

A procedure has been developed for the adsorption–photometric determination of cationic surfactants in natural water. The procedure is based on the adsorption preconcentration of the cationic surfactants on silica gel, the reaction of the concentrate with the anionic reagent bromothymol blue to form ion pairs on a solid surface, and the photometric determination of excess bromothymol blue in solution. The analytical range is (0.5–5) × 10^–5 M for a 50-mL sample.     

Non-extraction flow injection determination of cationic surfactants using eriochrome black-T

A new, rapid, sensitive, non-extraction batch, and flow injection spectrophotometric method for the determination of cationic surfactants (CSs) such as cetyltrimethyl ammonium bromide (CTAB), tetra-n-butyl ammonium chloride (TBAC) and cetylpyridinium chloride (CPC) is proposed. The method is based on the interaction of cationic surfactants with eriochrome black-T to form an ion-association complex. This complex has strong absorbance at 708 nm. The effects of chemical parameters and FIA variables on the determination of cationic surfactants were studied in detail, especially for CTAB. Under optimum conditions, the two linear calibration ranges of the method are 3.0 × 10⁻⁶ to 5.0 × 10⁻³ mol L⁻¹ CTAB, CPB and DTAB for the batch spectrophotometric method and 2.0 × 10⁻⁶ to 2.0 × 10⁻⁴ mol L⁻¹ CTAB, CPB and TBC for the flow injection spectrophotometric method. The sample throughput was 35 ± 5 samples h⁻¹ at room temperature. The relative standard deviations for 10 replicates of analysis of (2.0, 0.6 and 0.2) × 10⁻⁴ mol L⁻¹ CTAB were 1.2, 1.3, and 0.8%, respectively. In addition, the influence of potential interfering substances on the determination of cationic surfactants was studied. The proposed method is simple and rapid, using no toxic organic solvents. It was applied to the determination of trace CS in industrial wastewater with satisfactory results.     

An ion-extractive liquid-membrane anionic surfactant sensitive electrode and its analytical applications

Summary An electrode having as active substance bis (diphenylglyoxime)-o-phenanthroline-cobalt(III) dodecylsulphate (10^–3 M) in o-dichlorobenzene, responds to dodecylsulphate anion with a slope of about 48 mV/decade in the 3×10^–6–4×10^–3M concentration range. Common inorganic and organic anions do not interfere. The extraction constants of anionic surfactants in the membrane rise as their hydrocarbon chain gets longer, so that the higher members of the alkylsulphate homologous series do interfere. The surfactant-extractive electrode enables the potentiometric titration of anionic surfactants in the pH-range 1–11, in aqueous media and in the presence of alcohols. The differential titration of some binary mixtures of anionic surfactants is also possible.

---

Eine auf anionische Tenside ansprechende ionen-cxtraktive Flüssigkeits-Membranelektrode und ihre analytischen Anwendungen

Zusammenfassung Die beschriebene Elektrode besitzt als aktive Substanz Bis(diphenylglyoxim)-o-phenanthrolinkobalt(III)-dodecylsulfat (10^–3 M) in o-Dichlorbenzol und spricht auf das Dodecylsulfatanion mit 48 mV/Dekade im Konzentrationsbereich von 3 · 10^–6 bis 4 · 10^–3 an. Übliche anorganische und organische Anionen stören nicht. Die Extraktionskonstanten von anionischen oberflächenaktiven Substanzen nehmen mit der Länge der Kohlenwasserstoffkette zu, so daß die höheren Glieder der Alkylsulfatreihe stören. Die Elektrode ermöglicht die potentiometrische Titration anionischer oberflächenaktiver Substanzen im pH-Bereich 1–11 in wäßrigem Medium und in Gegenwart von Alkoholen. Eine differentielle Titration einiger binärer Gemische ist ebenfalls möglich.

     

Comparative study on the determination of cephalexin in its dosage forms by spectrophotometry and HPLC with UV-vis detection

This paper discusses the spectrophotometric determination of cephalexin as the intact cephalexin or as its acid-induced degradation product. Cephalexin can be determined in the range 1 × 10^–5–18 × 10^–5 M with relative standard deviations of 5-1%. The limits of quantitation and detection were 10^–5 and 0.3 × 10^–5 M, respectively. These procedures were compared with reversed-phase HPLC determination. No interference was observed in the presence of common pharmaceutical adjuvants. The H-point standard additions method was applied in order to correct for the possible presence of the cephalexin precursor, 7-aminocephalosporanic acid; this improves the selectivity of the UV-vis spectrophotometric method.     

Electrochemical sensor of nitrite based on an inorganic film modified glassy carbon electrode

The electrocatalysis of nitrite in solutions at an inorganic film modified glassy carbon electrode was studied. The modifier was an electrodeposited thin inorganic film of the copper-heptacyanonitrosylferrate (CuHNF). Cyclic voltammetry of the modified electrode in a nitrite solution revealed that both oxidation and reduction of nitrite were catalyzed and the electrocatalytic currents were controlled by the diffusion of nitrite. Voltammetric and amperometric responses were investigated. When applied as an amperometric sensor in a flow injection system, the modified electrode permitted detection at — 0.55 V, over 500 mV lower than at the naked electrode surface. A linear response range extending from 1 × 10^–6 to 1 × 10^–3 M nitrite was obtained, with a detection limit of 3 × 10^–7 M. The relative standard deviation for 50 repetitive injections with a 5 × 10^–5 M nitrite solution was less than 4%. The procedure was applied to the determination of nitrite in saliva and nitrate.     

Negative ion field desorption mass spectrometry of anionic surfactants

Summary Negative ion field desorption mass spectrometry has been applied to detergents containing anionic surfactants. The mass spectra demonstrate a high selectivity for the detection of the sulphonates (concentration limit 10^–5 mol/l). The spectra do not contain fragment ions nor ionization products from non-ionic components of the mixture.

---

Felddesorptions-Massenspektrometrie negativer Ionen zur Analyse von anionischen Tensiden

Zusammenfassung Die Felddesorptions-Massenspektrometrie negativer Ionen wurde zur direkten Mischungsanalyse von Detergentien, die anionaktive Tenside enthalten, angewendet. Die Massenspektren zeigen eine hohe Selektivität der Methode für den Nachweis der Sulfonate (Konzentrationsgrenze 10^–5 mol/l). Die Spektren enthalten weder Fragmentionen noch Ionisierungsprodukte nichtionischer Komponenten der Mischung.

     

Radiometric determination of anionic surfactants by two-phase titration method with the use of131I-Rose Bengal as indicator

The paper describes a radiometric variant of the two-phase titration method for the determination of anionic surfactants of nonsoapy type. The method is based on the titration of an anionic surfactant with Septonex in alkaline medium in the presence of¹³¹I-Rose Bengal /abbreviated¹³¹I-RB/. The ion associates are extracted into chloroform. The equivalence point is determined graphically from the activity of¹³¹I-RB-Septonex associate, which is formed after the consumption of the anionic surfactant and which passes into the organic phase. The influence of¹³¹I-RB amount, pH of the titrated medium and of soap presence on the precision of anionic surfactants determination was studied. The detection limit is 2.88 g sodium n-dodecylsulphate in 10 ml of sample.     

Spectrophotometric method for determination of tobramycin,apramycin and kanamycin in formulations

Summary A Spectrophotometric method for determination of the aminoglycoside antibiotics tobramycin, apramycin and kanamycin in formulations has been developed. The method is based on the formation in slightly acidic medium of an ion-pair between the protonated antibiotic and the anionic form of Bromothymol Blue. The ionpair is extracted with chloroform and the absorbance measured at 430 nm. Beer's law is followed in the range 1–5×10^–3 M.

---

Spektrophotometrische Methode zur Bestimmung von Tobramycin, Apramydn und Kanamycin in Arzneien

Zusammenfassung Eine Spektrophotometrische Methode zur Bestimmung der Glycosidantibiotika Tobramycin, Apramycin und Kanamycin in Arzneimitteln wurde ausgearbeitet. Sie beruht auf der Bildung eines Ionenpaares in schwach saurem Milieu aus dem protonierten Antibioticum und Bromthymolblau-Anion. Das Ionenpaar wird mit Chloroform extrahiert und die Absorption bei 430 nm gemessen. Das Beer'sche Gesetz wird bei 1–5×10^–3 M befolgt.

     

Cathodic stripping voltammetric determination of anti-cancer medicine nitrocaphanum at nafion modified electrode

An electrochemical method for the determination of anti-cancer medicine nitrocaphanum was described. The reaction mechanism of nitrocaphanum at Nafion CME was also discussed. It was found, in pH 2.5 medium, a linear response was observed for nitrocaphanum in the concentration range of 2.2 × 10^–8 M to 1.3 × 10^–6 M. Detection limit of this method is 5 × 10^–9 M, relative standard deviation for 10 measurements is 1.7%. The results of nitrocaphanum determination in real samples were satisfactory.     

Mixed-mode liquid chromatography of aliphatic anionic surfactants with a naphthalenetrisulfonate mobile phase

Summary Separation of three classes of anionic surfactants (alkyl sulfates, alkanesulfonates, and alkyl phosphates) are achieved on a mixed-mode reversed phase (RP) phenyl/-anion exchange column using a naphthalenetrisulfonate (NTS)-acetonitrile (ACN) mobile phase via indirect photometric, indirect fluorometric, direct or indirect conductivity detection. Mixtures of C₅–C₁₈ sulfates, C₆–C₁₈ sulfonates, and C₁–C₄ phosphates (mono- and di-ester) can be separated in less than 20, 24, and 20 min respectively. Although hydrophobic effects are more pronounced in mixed-mode chromatography, equivalent-per-equivalent exchange of analysis and eluent ion is still required for sensitive indirect photometric, fluorometric, or conductivity detection. The detection limits of alkyl sulfates and alkanesulfonates are in the range of 3–15 pmoles which are at least an order of magnitude better than suppressed conductivity detection. The determination of surfactants in a variety of real samples is also presented.     

Potentiometric Flow Injection Analysis of Anionic Surfactants in Industrial Products and Wastes

A new sensor for anionic surfactants with a membrane consisting of 33wt% poly(vinyl chloride) (PVC), 66wt% dioctylphthalate (DOP) plasticizer, and 1wt% tridodecylmethylammonium chloride (TDMAC) is developed and used for flow injection analysis. The sensor displays a working response range of 5×10^–7–5×10^–3M dodecylbenzene sulfonate (DBS^–) with a Nernstian slope of 58.5±0.2mV decade^–1, a response time of 30s and a detection limit of 1.5×10^–7M DBS^–. Selectivity measurements with different anionic species indicate good membrane selectivity towards DBS^–. The sensor is used to measure anionic surfactants (DBS^–) in different wastewater samples, commercial detergent products, and for monitoring the rate of surfactant biodegradation in sewage treatment plants. The results obtained agree fairly well with data obtained by the standard extraction-spectrophotometric method. The proposed potentiometric method offers the advantages of simplicity, accuracy, automation feasibility, and applicability to turbid and colored sample solutions.     

Electrocapillary potentiometric determination of anionic surfactants in detergents

Summary An attempt has been made to use electrocapillarity for potentiometric determinations of anionic surfactants. A sitting mercury drop indicator electrode was successfully used for these titrations. Anionic surfactants should be titrated in a solution of defined ionic strength (0.8% sodium sulphate) at any pH between 3 and 10. A cationic surfactant (Hyamine 1622) should be used as the titrant. Pure anionic surfactants, technical grade anionic surfactants and anionic surfactants in model detergents have all been successfully titrated.

---

Elektrokapillare Potentiometrie anionischer Tenside

Zusammenfassung Der Elektrokapillareffekt wurde zur potentiometrischen Bestimmung anionischer Tenside auszunutzen versucht. Als Indikatorelektrode wurde mit Erfolg eine J-förmige Hg-Elektrode (Elektrode mit aufsitzendem Hg-Tropfen) benutzt. Die Titration anionischer Tenside wird in einer Lösung bestimmter Ionenstärke (0,8% Natriumsulfat) und im pH-Bereich 3–10 durchgeführt. Als Titrant verwendet man dazu ein kationisches Tensid (Hyamin 1622). Reine anionische Tenside, technische anionische Tenside und anionische Tenside in einem Modellwaschmittel wurden titriert.

---

---

Presented at the 8th International Microchemical Symposium, Graz, August 25–30, 1980.     

Tetrachloroferrate(III)-selective liquid membrane electrode based on crystal violet

An extract of crystal violet-tetrachloroferrate(III) in nitrobenzene was used to prepare a tetrachloroferrate(III)-selective liquid membrane electrode with a poly(vinyl chloride) support. The optimal conditions to determine 2.5 × 10^–5 – 5.0 × 10^–2 M iron(III) as tetrachloroferrate(III) (anionic slope 56 mV/decade, detection limit 7.9 × 10^–6 M) were found to be 4.0–5.5.M total chloride in 0.75–1.5M hydrochloric acid. The electrode was reliably applied to determine iron in human blood, haematite and mineralized vitamin syrup by direct potentiometry, standard and sample additions as well as standard subtraction techniques.