The role of asbestos morphology on their cellular toxicity: an in vitro 3D Raman/Rayleigh imaging study

Amphiboles caused cohorts of deaths in exposed workers, leading to some of the largest class actions in the industry. Once inhaled, these inorganic fibers are thought to be both chemically and morphologically toxic, and their biopersistence in the lungs over decades lead to progressive pathologies, mesothelioma, and asbestosis. However, this exceptionally long chronicity for human pathologies suggests that chemical toxicity is certainly low, suggesting that morphological parameters could be more relevant in the pathology. Here, we developed a 3D Raman/optical imaging methodology in vitro to characterize both morphological and chemical parameters of cell/fiber interactions. We determined that lung cells could vesiculate amphiboles with length below 5 μm or could embed those not exceeding 15 μm in their fibrous extracellular matrix. Lung cells can thus develop defense strategies for handling the biopersistence of inorganic species, which may thus have major impact for biosafety issues related to nanomaterials.     

Iron topochemistry and surface reactivity of amphibole asbestos: relations with in vitro toxicity

Chemical reactivity of asbestos tremolite from Italy and USA localities and Union Internationale Contre le Cancer (UICC) crocidolite was studied in relation to Fe content, oxidation state, and structural coordination. Direct correlation between amount of Fe²⁺ at the exposed M(1) and M(2) sites of the amphibole structure and fiber chemical reactivity was established. The in vitro toxicity of the same samples was investigated on human alveolar A549 cell line. Relationship between crystal-chemical features and cell toxicity is not straightforward. UICC crocidolite has Fe content and chemical reactivity largely higher than that of tremolite samples, but all show comparable in vitro toxic potential. Results obtained evidenced that Fe topochemistry is not a primary factor for induced cell toxicity, though it accounts for asbestos chemical reactivity (and possibly genotoxicity).     

The iron-related molecular toxicity mechanism of synthetic asbestos nanofibres: a model study for high-aspect-ratio nanoparticles

Asbestos shares with carbon nanotubes some morphological and physico-chemical features. An asbestos-like behaviour has been recently reported by some authors, though the mechanism of toxicity may be very different. To identify at the atomic level the source of toxicity in asbestos, the effect of progressive iron loading on a synthetic iron-free model nanofibre previously found non-toxic in cellular tests was studied. A set of five synthetic chrysotile nanofibres [(Mg,Fe)3(Si2O5)(OH)4] has been prepared with Fe ranging from 0 to 1.78?wt?%. The relationship between fibre-induced free-radical generation and the physico-chemical characteristics of iron active sites was investigated with spin-trapping techniques on an aqueous suspension of the fibres and M?ssbauer and EPR spectroscopies on the solids, respectively. The fully iron-free fibre was inert, whereas radical activity arose with even the smallest amount of iron. Surprisingly, such activity decreased upon increasing iron loading. M?ssbauer and EPR revealed isolated iron ions in octahedral sites that undergo both axial and rhombic distortion and the occurrence of aggregated iron ions and/or extra-framework clustering. The isolated ions largely prevailed at the lowest loadings. Upon increasing the loading, the amount of isolated iron was reduced and the aggregation increased. A linear relationship between the formation of carbon-centred radicals and the amount of rhombic-distorted isolated iron sites was found. Even the smallest iron contamination imparts radical reactivity, hence toxicity, to any chrysotile outcrop, thereby discouraging the search for non-toxic chrysotile. The use of model solids that only differ in one property at a time appears to be the most successful approach for a molecular understanding of the physico-chemical determinants of toxicity. Such findings could also be useful in the design of safer nanofibres.     

The effect of an external electric field on surface morphology of co-deposited Pd/D films

The polarized PdD electrode undergoes significant morphological changes when exposed to an external electric field. These changes range from minor, e.g. re-orientation and/or separation of weakly connected globules, through forms that result from a combined action of the field as well as that connected with the evolution of gaseous deuterium, to shapes that require substantial energy expenditure.     

A 3D bio-printed spheroids based perfusion in vitro liver on chip for drug toxicity assays

Liver is the foremost organ of human being for drug metabolism, and it played a significant role in toxicity evaluation of drugs. Establishing a liver model in vitro can accelerate the process of the drug screening and new drug research and development. We provide a 3D printing based hepatic sinusoid-on-a-chip microdevice that reconstitutes organ-level liver functions to create a drug screening model of toxicity evaluation on chip. The microfluidic device, which recapitulates the hepatic sinusoi...     

3D Raman imaging of systemic endothelial dysfunction in the murine model of metastatic breast cancer

It was recently reported in the murine model of metastatic breast cancer (4T1) that tumor progression and development of metastasis is associated with systemic endothelial dysfunction characterized by impaired nitric oxide (NO) production. Using Raman 3D confocal imaging with the analysis of the individual layers of the vascular wall combined with AFM endothelial surface imaging, we demonstrated that metastasis-induced systemic endothelial dysfunction resulted in distinct chemical changes in the endothelium of the aorta. These changes, manifested as a significant increase in the protein content (18 %) and a slight decrease in the lipid content (4 %), were limited to the endothelium and did not occur in the deeper layers of the vascular wall. The altered lipid to protein ratio in the endothelium, although more pronounced in the fixed vascular wall, was also observed in the freshly isolated unfixed vascular wall samples in the aqueous environment (12 and 7 % change of protein and lipid content, respectively). Our results support the finding that the metastasis induces systemic endothelial dysfunction that may contribute to cancer progression.

Open image in new window

Graphical Abstract Schematic illustration of methodology of sample preparation and measurement

     

The role of cross-linking structures to the formation of one-dimensional nano-organized polyaniline and their Raman fingerprint

In the present work, the resonance Raman, UV-vis-NIR and scanning electron microscopic (SEM) data of nanorods (about approximately 300 nm in diameter) and nanofibers (about approximately 93 nm in diameter) of PANI are presented and compared. The PANI samples were synthesized in aqueous media with dodecybenzenesulfonic acid (DBSA) and beta-naphtalenesulfonic acid (beta-NSA) as dopants, respectively. The presence of bands at 578, 1400 and 1, 632 cm(-1) in the Raman spectra of PANI-NSA and PANI-DBSA shows that the formation of cross-linking structures is a general feature of the PANI chains prepared in micellar media. It is proposed that these structures are responsible for the one-dimensional PANI morphology formation. In addition, the Raman band at 609 cm(-1) of PANI fibers is correlated with the extended PANI chain conformation.     

A novel approach to investigate vascular wall in 3D: Combined Raman spectroscopy and atomic force microscopy for aorta en face imaging

A novel approach based on the combination of Raman confocal 3D imaging with atomic force microscopy (AFM) for analysis of the murine vessel wall en face is described. The approach is based on subsequent Raman and AFM imaging of the same areas of the sample. This methodology allows for direct correlation of the chemical structure (Raman data) with morphology of the surface (AFM). The sub-cellular structures of the tissue e.g., cell nuclei, heme, or lipid-rich species are visualized and localized by the application of Raman imaging, while AFM complements these data with high-resolution information about the surface topography and size of lipid-rich structures. Overall, the applied approach enables detailed characterization of the inner layer of the vessel wall.     

Microprobe study of enhanced Raman scattering effect on WO3/Ag thin films

Enhanced Raman scattering effect on WO₃ thin films, sputtered on a silicon substrate coated-silver thin film, has been evidenced using the MOLE microprobe. The silver surface is very rough and the observed ERS effect seems to be due to the formation of tungsten bronze at the WO₃/Ag interface. Thermal treatment favours silver diffusion in the WO₃ film and the formation of silver tungstate.     

2D/3D-QSAR comparative study on mutagenicity of nitroaromatics

As the key techniques in predictive toxicology, the goal of quantitative structure-activity relationships (QSARs) is to explore the mechanism of toxic action based on the molecular structures of pollutants and to develop quantitative models for predictive…     

High pressure behavior of α-NaVO3: A Raman scattering study

The reported pressure-induced amorphization in α-NaVO₃ has been re-investigated using Raman spectroscopy. Discontinuous changes are noted in the Raman spectrum above 5.6 GPa implying large structural changes across the transition. The decrease in frequency of the V-O stretching mode across the transition suggests that the vanadium atom may be in octahedral coordination in the high pressure phase. Excessive broadening of the internal modes is observed above 6 GPa. New peaks characteristic of a crystalline phase gain in intensity at higher pressures in the bending modes region; however, the transformation is not complete even at 13 GPa. Co-existence of phases is noted over a significant pressure range above the onset of transition. Pressure released spectrum is found to be a mixture of crystalline α-phase, traces of crystalline β-phase and highly disordered phase consisting of V-O units in five- and six-fold coordination.     

The role of human in the loop: lessons from D3R challenge 4

The rapid development of new machine learning techniques led to significant progress in the area of computer-aided drug design. However, despite the enormous predictive power of new methods, they lack explainability and are often used as black boxes. The most important decisions in drug discovery are still made by human experts who rely on intuitions and simplified representation of the field. We used D3R Grand Challenge 4 to model contributions of human experts during the prediction of the structure of protein–ligand complexes, and prediction of binding affinities for series of ligands in the context of absence or abundance of experimental data. We demonstrated that human decisions have a series of biases: a tendency to focus on easily identifiable protein–ligand interactions such as hydrogen bonds, and neglect for a more distributed and complex electrostatic interactions and solvation effects. While these biases still allow human experts to compete with blind algorithms in some areas, the underutilization of the information leads to significantly worse performance in data-rich tasks such as binding affinity prediction.     

Effect of 3D ZnO:Fe morphology on the photocatalytic activity under solar irradiation

Nanoparticles, microsphere, hedgehog sphere-like and flower-like ZnO:Fe photocatalysts were prepared by the hydrothermal method. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and ultraviolet/visible absorption spectra (UV?CVis). The results show that the ZnO:Fe photocatalysts with different 3D morphologies are a hexagonal wurtzite structure with space group of p63mc. The pH value of the precursor has a great influence on various morphologies of ZnO:Fe photocatalysts. The flower-like and hedgehog sphere-like ZnO:Fe photocatalysts exhibit the high solar photocatalytic behavior on methylene blue (MB). The ZnO:Fe order of photocatalytic activity is as follows: flower?>?hedgehog sphere?>?microsphere?>?nanoparticle. The flower-like ZnO:Fe is optimal, which exhibits the highest degradation rate of 98% for light time of 5?h.     

Synchrotron X-ray 2D and 3D elemental imaging of CdSe/ZnS quantum dot nanoparticles in Daphnia magna

The potential toxicity of nanoparticles to aquatic organisms is of interest given that increased commercialization will inevitably lead to some instances of inadvertent environmental exposures. Cadmium selenide quantum dots (QDs) capped with zinc sulfide are used in the semiconductor industry and in cellular imaging. Their small size (<10 nm) suggests that they may be readily assimilated by exposed organisms. We exposed Daphnia magna to both red and green QDs and used synchrotron X-ray fluorescence to study the distribution of Zn and Se in the organism over a time period of 36 h. The QDs appeared to be confined to the gut, and there was no evidence of further assimilation into the organism. Zinc and Se fluorescence signals were highly correlated, suggesting that the QDs had not dissolved to any extent. There was no apparent difference between red or green QDs, i.e., there was no effect of QD size. 3D tomography confirmed that the QDs were exclusively in the gut area of the organism. It is possible that the QDs aggregated and were therefore too large to cross the gut wall.     

Raman study of TiO2 role in SiO2-Al2O3-MgO-TiO2-ZnO glass crystallization

Tough glass-ceramic material of special mechanical properties with nanosize crystal phases formed by appropriately controlled crystallization was studied by Raman spectroscopy. It was obtained by TiO2 activated crystallization of Mg-aluminosilicate glass of SiO2-Al2O3-MgO-TiO2-ZnO composition. Crystallization was preceded by a change in the TiO2 structural position and state, which is manifested by a changed color of glass from yellow into blue shortly before the glass transformation (Tg) temperature. Raman spectroscopy was applied to explain the mechanism of this process and to establish the role of TiO2 in the early stage of glass crystallization that precedes a complete crystal phase formation. The starting glasses were found in almost complete disorder, since all bands were weak, broad and dominated by a Bose band at about 90 cm-1. After the sample annealing all bands turned out better resolved and the Bose band practically disappeared, both confirming the amorphous structure reorganization process. A multiplet observed in the vicinity of 150 cm-1 we assigned to the anatase and other titania structures that can be considered prime centers of crystallization. Finally, in the closest neighborhood of the Rayleigh line the low frequency mode characterizing nanoparticles was observed. According to this band theory, the mean size of initial titania crystallites is about 10nm for all samples, but the size distribution varies within factor two among them.     

Singlet-triplet splittings and their relevance to the spin-dependent exciton formation in light-emitting polymers: an EOM/CCSD study

By employing the coupled-cluster equation of motion method (EOM/CCSD) for excited-state structures, we have investigated the structure dependence of the singlet and triplet exciton splittings, through extensive calculations for polythiophene (PT), poly(3,4-ethylenedioxythiophene) (PEDOT), poly(thienylenevinylene) (PTV), polyparaphenylene vinylene (PPV), MEHPPV, polyparaphenylene ethylene (PPE), polyfluorene (PFO), and ladder-type polyparaphenylene (mLPPP). The results for the polymer are extrapolated through computations for the oligomers with increasing length. Recent investigations have been quite controversial about whether the internal quantum efficiency of electroluminescence could be higher than the 25% spin statistics limit or not in polymeric materials. Using a simple relationship between the exciton formation rate and the excitation energy level, we have discussed the material-dependent ratios of singlet and triplet exciton formation, which are in good agreement with the magnetic-field resonance detected transient spectroscopy measurement by Wohlgenannt et al. for a series of electronic polymers. This provides another piece of evidence to support the view that the internal quantum efficiency for conjugated polymers can exceed the 25% limit.     

A Raman spectroscopic study of the low-frequency vibrations in anisole and anisole-d3

Low-frequency Raman spectra of solid anisole and of solid anisole-d₃ have been recorded at 130 K. The phenyl torsion observed at 148 cm^?1 is shifted to 133 cm^?1 upon deuteration of the methyl group. The twofold torsional barriers calculated from these frequencies are 4033 ± 110 cm^?1 and 4094 ± 123 cm^?1 indicating that coupling to other low-frequency modes in both cases is of the same order of magnitude. The methyl torsional mode was observed at 285 cm^?1 in the spectrum of solid anisole and at 183 cm^?1 in the spectrum of anisole-d₃. The threefold barriers calculated using these frequencies are 1847 ± 20 cm^?1 and 1465 ± 18 cm^?1 respectively. These barrier values indicate that the methyl torsion is coupled to another low-frequency mode. A doublet centered at 230 cm^?1 in anisole is shifted to 245 cm^?1 in anisole-d₃; it is proposed that this is due to a ring mode coupled to the methyl torsion. The splitting is interpreted as an example of Davydov splitting.