Comparison of series 5 gas chromatography column performances from a variety of manufacturers for separation of chlorinated dibenzo-p-dioxins and dibenzofurans using high-resolution mass spectrometry

An extended study of seven fused silica capillary gas chromatographic (GC) columns has been conducted with regard to separation of international toxic equivalent factor (I-TEF) isomers (tetra- through octa-chlorinated at 2,3,7,8 positions) of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDDs/PCDFs) from closely co-eluted other isomers using high-resolution gas chromatography-high-resolution mass spectrometry (HRGC-HRMS). The data are explicated in mass chromatograms of Series 5 GC columns from a variety of manufacturers (Varian CP-Sil 8 CB LowBleed/MS, Phenomenex ZB-5UMS, Agilent HP-5MS, Restek Rtx-5MS, Supelco Equity-5, J&W Scientific DB-5 and DB-5MS), according to relative retention times, and 2,3,7,8-substituted isomer concentrations for each of the columns tested. Results showed differences between 5% phenyl methyl silicone and 5% silphenylene (Si-arylene) silicone polymer type GC stationary phases in separation of 2,3,7,8-substituted PCDDs/PCDFs from closely co-eluted isomers. The separation differences for Si-arylene type columns resulted in lower toxic equivalence (TEQ) values compared to the siloxane-based columns. Because of differences in product nomenclature and manufacturing practices by various manufacturers, incorrect assumptions and comparisons may be made regarding the interchangeability of these columns for PCCD/PCDF separations. The data presented are the most comprehensive to date and provide a valuable addition to operational criteria for the standard US Environmental Protection Agency methods 1613b and 8290.     

Optimization of separation and detection conditions for comprehensive two-dimensional gas chromatography--time-of-flight mass spectrometry analysis of polychlorinated dibenzo-p-dioxins and dibenzofurans

The 2,3,7,8-substituted polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) are among the most toxic compounds known, and several sources of exposure to these chemicals should be monitored to protect human and environmental health. The current predominant method of analysis is too expensive and cumbersome, and comprehensive two-dimensional GC coupled to time-of-flight mass spectrometry (GC x GC--TOF-MS) has the potential to lower the costs and speed analysis of PCDD/Fs. In this study, GC x GC--TOF parameters were evaluated and optimized to yield complete separation of the 17 most important PCDD/F congeners from polychlorinated biphenyls (PCBs) interferences, and to attain the lowest detection limits. The optimization study entailed evaluation of oven temperature programs, column flow rates, ion source temperatures, electron ionization energy, data acquisition rate, and various GC x GC parameters, including modulation period, modulator temperature offset and hot pulse duration. After optimization, all 17 PCDD/Fs were separated in <60 min, and in particular, the critical pair of 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) and pentachlorobiphenyl congener CB126 did not co-elute chromatographically. Accurate identification and determination of all analytes could be made using their deconvoluted full mass spectra. In GC x GC, the modulation period and start time were the most important factors that affected sensitivity and selectivity for the analysis of the PCDD/Fs. The modulation period should be < or = 4s to preserve separations achieved in one-dimensional GC, and the modulation start time was important to achieve one large slice and two smaller symmetrical slices of TCDD to maximize its detection sensitivity. After optimization, the method could identify 0.25 pg of TCDD with standard injection from its full mass spectrum.     

Comparison of gas chromatography-ion-trap tandem mass spectrometry systems for the determination of polychlorinated dibenzo-p-dioxins, dibenzofurans and dioxin-like polychlorinated biphenyls

Two gas chromatography-mass spectrometry systems equipped with an ion-trap mass analyzer working in tandem mode (GC-MS-MS) were evaluated for the determination of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (PCBs) in food samples. The performance of the two ion-trap instruments, which dispose of an external ion source (ThermoFinnigan GCQ/Polaris) and internal ionization (Varian Saturn 2,200), have been compared in terms of linearity, repeatability, limit of detection and long-term precision. Both instruments provided similar run-to-run and day-to-day precisions, ranging from 2% to 8% and between 2% and 13%, and instrumental limits of detection between 0.09 and 0.36 pg injected for PCDD/Fs and from 0.03 to 0.09 pg injected for dioxin-like PCBs. Although both instruments seem to be suitable for food analysis, only the use of external ionization allowed to achieve reliable results for PCDD/F determination at concentrations close to the maximum residue levels established by the EU for foods. Internal ionization provides high limits of detection (from 10- to 30-fold higher) and worse precision (RSD, 14-43%). In contrast, for dioxin-like PCBs both instruments allowed to obtain excellent results with precisions lower than 15%.     

同位素稀释高分辨气相色谱-高分辨质谱法检测烟道气中的低氯代二恶英

建立了同位素稀释高分辨气相色谱-高分辨质谱检测烟道气中痕量低氯代二恶英的分析方法。采用索氏提取富集烟道气样品中的目标物,提取液经过复合硅胶柱和碱性氧化铝柱净化后,进行高分辨气相色谱-高分辨质谱检测。采用DB-5MS毛细管色谱柱（30 m×0.25 mm×0.25 μm）分离,以保留时间和同位素特征离子丰度比定性,以与同位素的峰面积比值定量。实验结果表明,方法的回收率为66.6%~112.5%,相对标准偏差（RSD）的范围为19.9%~40.5%（n=5）,方法的检出限（LOD）为0.027~0.485 μg/L。应用该方法检测了3个焚烧炉烟道气样品,回收率在85.7%~137.0%范围内,样品中目标物含量分布在11.4~9183 pg/Nm³之间。结果表明该方法适合用于烟道气中痕量低氯代二恶英的检测。     

Quantification of polychlorinated dibenzo-p-dioxins and dibenzofurans by direct injection of sample extract into the comprehensive multidimensional gas chromatograph/high-resolution time-of-flight mass spectrometer

Polychlorinated dibenzo-p-dioxins and dibenzofurans in crude extracts of fly ash and flue gas from municipal waste incinerators were quantified using a comprehensive multidimensional gas chromatograph (GC x GC) coupled to a high-resolution time-of-flight mass spectrometer (HR-TOFMS). For identification and quantification, we developed our own program to prepare 3D chromatograms of selected mass numbers from the data of the GC x GC/HR-TOFMS. Isolation of all congeners with a TCDD toxic equivalency factor from the other isomers by only one injection was confirmed. The instrumental detection limit of TCDD on the GC x GC/HR-TOFMS was 0.9 pg by the relative calibration method. Quantification of these substances in the crude extracts was achieved by direct injection to the GC x GC/HR-TOFMS. The results agree with the values obtained using a generic gas chromatography/high-resolution mass spectrometry (GC/HRMS) system. It was confirmed that measurement by high-resolution TOFMS and GC x GC effectively reduces interference from other chemicals.     

New strategy for comprehensive analysis of polybrominated diphenyl ethers,polychlorinated dibenzo-p-dioxins,polychlorinated dibenzofurans and polychlorinated biphenyls by gas chromatography coupled with mass spectrometry

A strategy for determination of polybrominated diphenyl ethers, polychlorinated dibenzodioxins, polychlorinated dibenzofurans and polychlorinated biphenyls on fatty matrices has been established. After extraction, the proposed method allows the purification and the fractionation of all target groups of compounds in a simple multi-step automated clean-up. Furthermore, their subsequent analysis is carried out using a single benchtop mass spectrometer, in four separate injections. Required sensitivity considering levels found in the environment is attained using electron impact ionisation followed by tandem in time mass spectrometry. The whole method has been evaluated on standard solution and quality control samples consisting of fortified beef fat. Sensitivity, selectivity, accuracy and repeatability were tested with satisfactory results.     

Analysis of polychlorinated dibenzo-p-dioxins, dibenzofurans and dioxin-like polychlorinated biphenyls in vegetable oil samples by gas chromatography-ion trap tandem mass spectrometry

Gas chromatography coupled to ion trap tandem mass spectrometry (CG-MS-MS) has been evaluated for the analysis of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) and dioxin-like polychlorinated biphenyls (dl-PCBs) in vegetable oil samples containing different concentration levels (0.2-6 pg WHO-TEQ g(-1) for both PCDD/Fs and dl-PCBs) of the 29 toxic congeners of PCDD/F and dioxin-like PCBs. The effect of potential interfering compounds such as polychlorinated naphthalenes (PCNs), polychlorinated biphenyls (PCBs) and polychlorinated diphenylethers (PCDEs) on the quantification of mono-ortho PCBs has been investigated. In addition, the influence of the clean-up procedure on the final determination by CG-MS-MS was studied, showing that the quality of the results depends to a great extent on this analytical step. Quality parameters have been established and good precisions (CV: 3-19%) and low limits of detection for PCDD/Fs (0.04-0.20 pg g(-1) oil) and dl-PCBs (0.08-0.64 pg g(-1) oil) were obtained. The method was validated by a comparison of the CG-MS-MS results with those obtained by GC-HRMS.     

Establishing an alternative method for the quantitative analysis of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans by comprehensive two dimensional gas chromatography-time-of-flight mass spectrometry for developing countries

Comprehensive Gas Chromatography-Time-of-Flight Mass Spectrometry (GC×GC-TOFMS) methodology has been refined for the analysis of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) in samples with different matrices. This is specifically for application in developing countries where access to gas chromatography-high resolution mass spectrometry (GC-HRMS) and highly skilled personnel is limited. The method, using an Rxi-5 Sil MS column in the first dimension ((1)D) coupled with an Rtx-200 column in the second dimension ((2)D), was used to quantify PCDDs and PCDFs in different environmental sample matrices. The results were compared with those obtained using GC-HRMS and good agreement was observed. The limit of detection (LOD) for the method (300fg on column for spiked soil samples) was determined using an Rxi-XLB ((1)D) column coupled with an Rtx-200 column ((2)D). Preliminary South African sample results are also discussed. Isomer specificity for different tetrachloro dibenzo-p-dioxins (TCDDs) and tetrachloro dibenzofurans (TCDFs) was investigated using a commercial standard. Adequate resolution was achieved. The method as described has great attraction for developing countries being both financially and operationally favourable.     

Multiresidue procedures for the determination of chlorinated dibenzodioxins and dibenzofurans in a variety of foods using capillary gas chromatography-electron-capture detection

Multiresidue digestion-extraction procedures for the determination of chlorinated dioxins and furans in a wide variety of products are presented. Procedure selection is dependent upon the residue(s) of interest, and on the fat content of the product. Additional cleanup is accomplished using column chromatography and a Florisil trap. The separation of residues is achieved by fraction collection off of two high-performance liquid chromatographic systems. Capillary gas chromatography employing electron-capture detection is used for quantitation. The extracts are suitable for gas chromatography mass spectrometry or gas chromatography with Hall electrolytic conductivity detection. Results of analysis, recovery data, and interlaboratory comparisons are presented. Spike recoveries will typically average 90% +/- 10%.     

Elemental speciation by chromatographic separation with inductively coupled plasma mass spectrometry detection

Separation techniques coupled to inductively coupled plasma mass spectrometry (ICP-MS) is reviewed. ICP-MS technique is described briefly. Coupling of the different separation techniques are described, together with the most common applications used for each technique that has been described in the literature. An overview for the future of separation techniques coupled to ICP-MS with regard to elemental speciation is discussed.     

Environmental analysis of chlorinated and brominated polycyclic aromatic hydrocarbons by comprehensive two-dimensional gas chromatography coupled to high-resolution time-of-flight mass spectrometry

A method for the analysis of chlorinated and brominated polycyclic aromatic hydrocarbon (Cl-/Br-PAHs) congeners in environmental samples, such as a soil extract, by comprehensive two-dimensional gas chromatography coupled to a high resolution time-of-flight mass spectrometry (GC×GC-HRTOF-MS) is described. The GC×GC-HRTOF-MS method allowed highly selective group type analysis in the two-dimensional (2D) mass chromatograms with a very narrow mass window (e.g. 0.02Da), accurate mass measurements for the full mass range (m/z 35-600) in GC×GC mode, and the calculation of the elemental composition for the detected Cl-/Br-PAH congeners in the real-world sample. Thirty Cl-/Br-PAHs including higher chlorinated 10 PAHs (e.g. penta, hexa and hepta substitution) and ClBr-PAHs (without analytical standards) were identified with high probability in the soil extract. To our knowledge, highly chlorinated PAHs, such as C(14)H(3)Cl(7) and C(16)H(3)Cl(7), and ClBr-PAHs, such as C(14)H(7)Cl(2)Br and C(16)H(8)ClBr, were found in the environmental samples for the first time. Other organohalogen compounds; e.g. polychlorinated biphenyls (PCBs), polychlorinated naphthalenes (PCNs), and polychlorinated dibenzofurans (PCDFs) were also detected. This technique provides exhaustive analysis and powerful identification for the unknown and unconfirmed Cl-/Br-PAH congeners in environmental samples.     

Automated clean-up procedure for the gas chromatographic-high-resolution mass spectrometric determination of polychlorinated dibenzo-p-dioxins and dibenzofurans in milk.

A highly automated extraction and clean-up method for polychlorinated dibenzodioxins and polychlorinated dibenzofurans is described. The method includes the use of gel permeation chromatography, alumina clean-up and porous graphitized carbon chromatography, followed by analysis by gas chromatography-high-resolution mass spectrometry. The procedure allows for the analysis of six milk samples per day in addition to two quality control samples and a blank. Detection limits on a fat basis for the individual congeners in milk samples are in the sub-ppt range. Long-term performance was investigated and data are given for reproducibility, precision and accuracy.     

Congener-specific method for the determination of ortho and non-ortho polychlorinated biphenyls, polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans in foods by carbon-column fractionation and gas chromatography-isotope dilution mass spectrometry

 The chromatographic behavior of ortho and non-ortho polychlorinated biphenyls (PCBs) on supported carbon columns has been investigated and the structure-affinity relationship of activated carbon towards PCB molecules established. Optimisation of the parameters controlling the elution of PCB congeners through the carbon column led to the development of a solvent scheme for the efficient separation of (i) ortho substituted PCBs, (ii) non-ortho substituted PCBs and (iii) polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) in three separate fractions. A method for the extraction, clean-up, fractionation and determination of ortho and non-ortho substituted PCBs by GC-isotope dilution MS was developed and validated by analysis of a certified reference material. Possible losses of PCBs during freeze-drying and interferences of aliphatic hydrocarbons during mass spectrometric determination of ortho substituted PCBs are also discussed. Received: 23 June 1995/Revised: 9 May 1996/Accepted: 25 May 1996     

Evaluation of a high-resolution time-of-flight mass spectrometer for the gas chromatographic determination of selected environmental contaminants

A benchtop high-resolution time-of-flight mass spectrometer (TOF MS) was evaluated for the determination of key organic microcontaminants. The major advantage of the TOF MS proved to be the high mass resolution of about 0.002 Da (10 ppm). Consequently, the detectability of polar pesticides, polynuclear aromatic hydrocarbons and polychlorinated biphenyls is excellent, and detection limits are in the order of 1–4 pg injected mass. Best mass spectral resolution was obtained for medium-scale peaks. It is a disadvantage that the calibration range is rather limited, viz. to about two orders of magnitude. The high mass spectral resolution was especially useful to improve the selectivity and sensitivity when analyzing target compounds in complex samples and to prevent false-positive identifications.     

同位素稀释高分辨气相色谱-高分辨质谱法测定土壤样品中二恶英类化合物的等价毒性当量不确定度的评定

采用同位素稀释高分辨气相色谱-高分辨质谱法（isotope dilution high resolution gas chromatography and high resolution mass spectrometry,ID-HRGC-HRMS）测定土壤样品中二恶英类化合物（polychlorinated dibenzo-p-dioxins and dibenzofurans,PCDD/Fs）的等价毒性当量（toxic equivalent quantity,TEQ）。讨论并确定了测定土壤样品中二恶英类化合物2,3,7,8位异构体不确定度的来源并合成了各异构体的相对标准不确定度;在此基础上,计算了3种等价毒性当量因子（toxic equivalent factor,TEF）框架下土壤样品中PCDD/Fs的TEQ浓度及其合成不确定度和扩展不确定度。     

Microelectrospray interface with coaxial sheath flow for high-resolution capillary electrophoresis/mass spectrometry separation

We have fabricated a coaxial sheath liquid flow microelectrospray ionization (microESI) interface for capillary electrophoresis coupled with mass spectrometry (CE/MS). The ESI interface, which features a reduced probe diameter (130 microm i.d. x 174 microm o.d.) with a nebulizer-free format, can relatively easily electrospray a large amount of make-up sheath liquid (5-10 microL/min) over the long term (more than 80 runs) with a high degree of stability. The interface also provides higher separation qualities and improved detection sensitivities compared with a conventional ion spray (IS) interface.     

Evaluation of two commercial capillary columns for the enantioselective gas chromatographic separation of organophosphorus pesticides

The separation of the enantiomers of 13 organophosphorus pesticides (OPPs) has been investigated by gas chromatography (GC) with flame ionisation detection (FID) using two different commercially available chiral columns, Chirasil-Val (l-valine-tert-butylamide) and CP-Chirasil-Dex CB (heptakis (2,3,6-tri-O-metil)-β-cyclodextrin). Using the Chirasil-Val column no chiral resolution was obtained for the OPPs investigated under any tested experimental condition. The use of the CP-Chirasil-Dex CB stationary phase enabled good individual enantiomeric separation of two OPPs, ruelene and trichlorfon and partial separation of naled, chloretoxyphos, isophenphos and metamidophos. Also, the obtained chromatographic results showed that Chirasil-Dex could resolve enantiomers through the combination of different mechanism (e.g. formation of inclusion complexes and/or interactions outside the cyclodextrin cavity).

Under optimised conditions, precision, linearity range and detection limits were evaluated for the enantiomers of ruelene and trichlorfon using CP-Chirasil-Dex CB column and electron capture detection (ECD). By using the GC-ECD method the enantiomers of these OPPs could be satisfactorily detected at very low concentration levels. The detection limits observed were 1.5 ng mL⁻¹ and 11.5 ng mL⁻¹ for the enantiomers of trichlorfon and ruelene, respectively.     

Determination of urinary prostanoids by capillary gas chromatography/high-resolution mass spectrometry

A stable isotope-dilution gas-chromatography/high-resolution mass spectrometry method for the determination of prostaglandin E₂ (PGE₂) and 6-keto-prostaglandin F_1α (6-keto-PGF_1α) in urine as their methoxime/t-butyldimethylsilyl ether/t-butyl-dimethylsilyl ester derivatives is described. The derivatives are prepared by a novel derivatization scheme in which the pentafluorobenzyl esters are formed prior to the silylation step in which the t-butyldimethylsilyl esters are formed in an apparent exchange reaction. Recoveries through the entire extraction and derivatization procedure are 70.6% for PGE₂ and 64.4% for 6-keto-PGF_1α. Quantitation at mass resolutions approaching 10 000 eliminated all interferences in the PGE₂ chromatograms while lower resolutions were sufficient for 6-keto-PGF_1α. Limits of detection of 50 pg ml^?1 for each prostanoid were obtained. For PGE₂, a lower limit of detection was obtained at a mass resolution of 10 000 (50 pg ml^?1) than was obtained at a mass resolution of 1000 (80 pg ml^?1), illustrating the selectivity of detection.     

Determination of organic compounds from wood combustion aerosol nanoparticles by different gas chromatographic systems and by aerosol mass spectrometry

Organic compounds in atmospheric nanoparticles have an effect on human health and the climate. The determination of these particles is challenged by the difficulty of sampling, the complexity of sample composition, and the trace-level concentrations of the compounds. Meeting the challenge requires the development of sophisticated sampling systems for size-resolved particles and the optimization of sensitive, accurate and simple analytical techniques and methods. A new sampling system is proposed where particles are charged with a bipolar charger and size-segregated with a differential mobility analyzer. This system was successfully used to sample particles from wood pyrolysis with particle sizes 30–100 nm. Particles were analyzed by four techniques: comprehensive two-dimensional gas chromatography–time-of-flight mass spectrometry, gas chromatography–time-of-flight mass spectrometry, gas chromatography–quadrupole mass spectrometry, and aerosol mass spectrometry (aerosol MS). In the chromatographic techniques, particles were collected on a filter and analyzed off-line after sample preparation, whereas in the aerosol MS, particle analysis was performed directly from the particle source. Target compounds of the samples were polyaromatic hydrocarbons and n-alkanes. The analytical techniques were compared and their advantages and disadvantages were evaluated. The sampling system operated well and target compounds were identified in low concentrations.