Effect of metal ion exchange on the photocurrent response from bacteriorhodopsin on tin oxide electrodes

The transient photocurrent response from bacteriorhodopsin (bR) on tin oxide electrodes was strongly influenced by metal ions bound to bR molecules. The photocurrent polarity reversal pH, which corresponded to the pH value for the reversal of the proton release/uptake sequence in the bR photocycle, of cation-substituted purple membrane (PM) was shifted to lower pH with the increase in the cation affinities to carboxyl groups and a close correlation was noted between the two values. This suggests that the metal ion present in the extracellular region of a bR molecule modulates the pK(a) of proton release groups of bR by stabilizing the ionized state of the proton-releasing glutamic acids. The behavior of photocurrents at light-off in alkaline media, reflecting the proton uptake by bR, was unchanged by binding monovalent (Na(+) and K(+)) or divalent cations (Mg(2+) and Ca(2+)), but was drastically changed by binding La(3+) ions. This can be explained by invoking a substantial slowing of the proton uptake process in the presence of La(3+).     

Preferential partitioning of uncharged local anesthetics into the surface-adsorbed film

The surface tension and pH of aqueous solutions of three hydrochloric acid (HCl) - uncharged anesthetic (mepivacaine (MC), bupibacaine (BC) and dibucaine (DC)) mixtures were measured as a function of total molality and composition of local anesthetic in order to investigate the competitive surface-adsorption of uncharged and charged local anesthetics. The behavior of the surface tension versus total molality and pH versus total molality curves remarkably changed at the composition corresponding to an equimolar mixture. The pH measurements showed that uncharged and charged forms coexisted only at compositions more than the equimolar mixture. The partitioning quantities of respective uncharged and charged anesthetics into the surface-adsorbed film were estimated from their surface densities calculated thermodynamically. The greater quantity of uncharged anesthetics existed in the adsorbed film at the coexisting composition, that is, the uncharged anesthetics adsorbed more preferentially than charged ones. The relative ease with which uncharged anesthetics transferred into the surface-adsorbed film was proportional to the hydrophobicities and well correlated the anesthetic potencies. At compositions in the vicinity of physiological pH (ca. 7.4), the bulk solution is more abundant in charged anesthetics than uncharged ones, whereas the uncharged molecules is conversely more abundant in the surface region. The present results clearly imply that the surface-active molecule of local anesthetic in the physiological pH is the uncharged form and the partitioning is greatly dependent on the hydrophobicity among the anesthetics.     

Distribution of local anesthetics in lipid membranes

Absorption of local anesthetics into lipid membranes and adsorption onto their surfaces were studied as a function of the pH of aqueous bulk solutions by measuring lipid vesicle electrophoretic mobility, the partition of the anesthetics between the aqueous and membrane phases by the use of fluorescence and radioactive tracer methods, and the effect of the anesthetics on interfacial tension of lipid monolayers formed at the oil/aqueous interface.

At a pH much lower than the pK_a value of the local anesthetic, the charged form of the local anesthetic was only adsorbed onto the membrane surface, as determined from vesicle electrophoretic mobility, radioisotope tracer and the monolayer surface tension studies. Surface partition coefficients of the charged form of the local anesthetics on phosphatidylcholine and phosphatidylserine membranes were obtained from the data of electrophoretic mobilities for lipid vesicles. The surface partition coefficients of various local anesthetics paralleled those of the bulk partition coefficients.

As the pH of the solutions increased, the adsorbed amount of the charged form of the anesthetic at the membrane interface decreased, while the absorption of the uncharged form of the local anesthetic into the membrane increased. The total amount of local anesthetic adsorbed per unit area of the membrane generally increased as the pH of the solution increased. This was also observed from the measurements of the fluorescence of local anesthetics adsorbed into the membranes. At lower pH than that corresponding to the pK_a value of the local anesthetic, the amount of anesthetic adsorbed depended greatly upon the membrane surface charge. At a higher pH than its pK_a, it did not depend appreciably on the surface charge density of the membrane but did depend on the bulk partition coefficients between the aqueous and oil phases.     

Bacteriorhodopsin-containing membrane fragments adsorbed on mercury-supported biomimetic membranes

Membrane fragments containing bacteriorhodopsin (bR), a light-driven proton pump, are adsorbed on mercury-supported biomimetic membranes. The biomimetic membranes consist in a phospholipid monolayer and an alkanethiol/phospholipid bilayer supported by a hanging mercury drop electrode. Once adsorbed on the lipid film, bR is activated by shining the mercury drop with an appropriate light source, and the transient capacitive current generated by the ion pump is measured under short-circuit conditions and in the absence of photoartefacts. Our results show that the lipid-coated mercury electrode is suitable for adsorbing membrane fragments and, hence, for studying the electrochemical behaviour of protein in a biomimetic environment.     

The effect of metal cation binding on the protein, lipid and retinal isomeric ratio in regenerated bacteriorhodopsin of purple membrane

The effect of metal cation binding on bacteriorhodopsin (bR) in purple membrane has been examined using in situ attenuated total reflection-Fourier transform infrared difference spectroscopy in aqueous media. It is known that adding metal cations to deionized bR regenerates the purple state from its blue state and recovers the proton pump function. During this process, infrared spectral changes in the frequency region of 1800-1000 cm-1 are monitored. The results reveal that metal cation binding affects the protein conformation, the retinal isomeric composition as well as lipid head groups. It is also observed that metal cation binding induces conformational changes in the alpha 1-helix region of bR, converting the portion of its alpha 1-helical domain into beta-turn or disordered coil. In addition, the influence of Ho3+ binding on the protein and lipid is observed to be larger than that of Ca2+. These results suggest that some of the metal cation binding sites are on the membrane lipid domain, while others could be on the intrahelical domain or interhelical loops where the Asp and Glu are located (binding with their COO- groups). Our results also suggest that the removal of the C-terminal of bR increase the accessibility of the binding site of metal cations, which affects protein conformational structure. All these observations are discussed in terms of the two proposals given in the literature regarding the metal cation binding sites.     

In situ characterization of functional purple membrane monolayers at the air-water interface

The purple membrane (PM) of Halobacterium salinarum contains a single type of protein, bacterio-rhodopsin (bR), which is a member of the seven alpha-helices transmembrane protein family. This protein is a photoactive proton pump, translocating one proton from the cytoplasmic to the extracellular side of the PM per photon absorbed. bR is found in trimers in PM, where they are assembled in a two-dimensional hexagonal lattice. We show herein that stable and functional films can be built in monolayers at the air-water interface by spreading aqueous suspensions of purified and native PM patches. In situ spectroscopic measurements at the air-water interface indicate that bR remains photoactive in this environment. Physical parameters of these PM films, such as protein molecular area, irreversible in-plane aggregation, z-axis orientation, film thickness, and surface roughness, were determined from surface pressure and surface potential-area isotherms, fluorescence spectroscopy, and X-ray reflectivity at the air-water interface. We find that PM do form organized monolayers of membranes, with an optimal packing density at a surface pressure of approximately 20 mN/m, although no preferential vectorial alignment, with respect to the plane normal to the membrane, can be detected from fluorescence quenching experiments.     

Extraction and Purification of Purple Membrane for Photochromic Thin Film Development: Application in Photoelectrochemical Investigation

Purple membrane (PM) has been extracted and purified from archaebacteria for thin film development. The purified purple membrane is isolated in 1?% polyvinyl alcohol solution for making thin film within gelatin and organically modified silicate matrices. For thin film within gelatin matrix, homogenized purple membrane suspension is mixed with 8?% gelatin and poured into a specially designed block with desired thickness of spacer having hydrophobicity followed by gelatinization of the same over home-made thermostatic control unit at 38?°C. The gelatinized matrix is then allowed to dry under controlled conditions of humidity and temperature. The films of varying thicknesses ranging between 40, 50, and 60??? are used for photo-electrochemical measurements. The results on photo-electrochemistry of non-oriented purple membrane film provides valuable information on the generation of forward (light on) and backward (light off) photocurrent as a function of: (a) applied potential and (b) film thickness. An increase in applied negative potential increases the amplitude of photocurrent whereas decrease in film thickness facilitates the reversibility of photocurrent response.     

聚吡咯(PPy)对细菌视紫红质(bR)的光电性能的影响

细菌视紫红质(bacteriorhodopsin,用bR表示)是嗜盐菌(halobacterium halobium)紫膜中发现的唯一蛋白质,由于具有独特质子泵和光色互变功能以及高稳定性,而成为理想的生物材料。在光照下,它产生典型的微分脉冲电信号^[1],而且响应快,这对于它在信息存储、仿视觉系统等应用方面有极大的应用前景。     

Direct Measurements for Isomer Ratio of Retinal in Bacteriorhodopsin by an Electrochemical Method

Abstract— The composition of retinal isomers in bacteriorhodopsin (bR) in purple membrane (PM) was determined by photoelectric response measurements using a sandwich-type electrochemical cell. The measured amplitude of the photocurrent obtained from a dark-adapted sample was 55% lower than that from a light-adapted sample. This ratio, 55:45, would correspond to the 13- cis /aU- trans isomer ratio of retinal in the dark if the 13- cis form of the pigment did not give a response. This amplitude change correlated with the visible spectral shift of bR. The isomer ratio in the dark depended only weakly on the temperature of the electrolyte, whereas the retinal isomerization rate strongly depended on the temperature and the pH of the electrolyte in the cell. Our results indicate that photoelectric response is elicited only by a species originating from bR containing all- trans retinal and that the behavior of the response in the dark is associated with the pKa of the proton release kinetics of Asp-85.     

Dynamics of Bacteriorhodopsin in the Dark-Adapted State from Solution Nuclear Magnetic Resonance Spectroscopy

To achieve efficient proton pumping in the light-driven proton pump bacteriorhodopsin (bR), the protein must be tightly coupled to the retinal to rapidly convert retinal isomerization into protein structural rearrangements. Methyl group dynamics of bR embedded in lipid nanodiscs were determined in the dark-adapted state, and were found to be mostly well ordered at the cytosolic side. Methyl groups in the M145A mutant of bR, which displays only 10 % residual proton pumping activity, are less well ordered, suggesting a link between side-chain dynamics on the cytosolic side of the bR cavity and proton pumping activity. In addition, slow conformational exchange, attributed to low frequency motions of aromatic rings, was indirectly observed for residues on the extracellular side of the bR cavity. This may be related to reorganization of the water network. These observations provide a detailed picture of previously undescribed equilibrium dynamics on different time scales for ground-state bR.     

BIOSYNTHETIC INCORPORATION OF M-FLUOROTYROSINE INTO BACTERIORHODOPSIN

Halobacterium halobium, grown in a defined medium where tyrosine had been largely replaced with m-fluorotyrosine, biosynthetically produced purple membrane. Analysis of this membrane by high pressure liquid chromatography of phenylthiocarbamyl derivatized amino acids of membrane acid hydrolysates revealed that up to 50% of the tyrosine was present as the m-fluorotyrosine form. Yields of the purple membrane decreased as the level of incorporation increased. The experimental purple membrane showed a single 19F NMR resonance at -61.983 ppm (relative to trifluoroacetic acid). The bacteriorhodopsin (bR) in the purple membrane was normal as assayed by gel electrophoresis, isoelectric focusing, circular dichroic spectra, and UV-visible spectra. However, the fluorinated tyrosine bacteriorhodopsins at near neutral pH exhibited slightly slower rates of proton uptake and a slower M-state decay with biphasic kinetics reminiscent of alkaline solutions of bR (pH > 9). These results imply that the tyrosines in bacteriorhodopsin may play a role in the photoactivated proton translocation process of this pigment.     

Difference in surface activities between uncharged and charged local anesthetics: correlation with their anesthetic potencies

The surface activities of six uncharged local anesthetics, dibucaine (DC), bupivacaine (BC), lidocaine (LC), mepivacaine (MC), benzocaine (BzC), and benzyl alcohol (BzOH) were investigated by taking surface tension measurements of their aqueous solutions. The surface densities of the uncharged anesthetics were calculated from the application of thermodynamic equations to the surface tension data. The surface activities for uncharged anesthetics became higher in the order of their hydrophobicities, BzOH相似文献   

The study of terbium regenerated bacterirhodopsin

Bacteriorhodopsin (bR) is the only retinal-contain- ing protein in the purple membrane of Halobacterium halobium[1]. Upon illumination, the protein undergoes a photocycle and pumps protons across the cell mem-brane[2,3]. It has been found that well-washed…     

Adsorption behavior and photoelectric response characteristics of bacteriorhodopsin thin films fabricated by self-assembly technique

The characteristics of bacteriorhodopsin (bR)-based thin films fabricated by self-assembly (SA) technique were investigated. Self-assembled monolayers (SAMs) of 11-mercaptoundecanoic acid (11-MUA) were spontaneously formed onto a pretreated gold substrate by soaking it into the ethanolic solution of 11-MUA, and used as a template for the adsorption of bR. Using poly- -lysine as a bridging molecule for bR adsorption onto SAMs of 11-MUA, bR-embedded purple membrane fragments were adsorbed by electrostatic attractive force. By ellipsometry and atomic force microscopy, the properties of the prepared bR-based thin films were investigated with the various fabrication conditions, such as bR suspension concentration and pH. An artificial photoreceptor was then fabricated with a sandwich-type structure of ITO/electrolyte gel/bR-based thin films/gold substrate. According to the monochromatic light illumination (560 nm) using Xenon lamp system, photoelectric responses of the fabricated photoreceptor were detected and analyzed. The stability of photoreceptors composed of the bR films fabricated by different technique was also examined over the period of 60 days. It is concluded that the SA technique could be usefully applied to the protein-based thin films preparation for the development of bioelectronic devices.     

Local anesthetics facilitate ion transport across lipid planar bilayer membranes under an electric field: dependence on type of lipid bilayer

In order to elucidate the role of structural change of lipid membrane bilayer in the mode of action of local anesthetic, we studied the effects of local anesthetics, charged tetracaine and uncharged benzocaine, on ion permeability across various lipid planar bilayers (PC, mixed PC/PS (4/1, mol/mol); mixed PC/PE (1/1, mol/mol); mixed PC/SM (4/1, mol/mol)) under a constant applied voltage. The membrane conductances increased in the order of PC  PC/PS ≤ PC/SM  PC/PE. When the constant voltage of −100 or −70 mV was applied through the lipid bilayer membranes in the presence of positively charged tetracaine, the fluctuating current pulses with the large amplitude generated, but not appeared in the absence of tetracaine. The addition of uncharged benzocaine generated the fluctuating currents with the small amplitude. Both charged tetracaine and uncharged benzocaine facilitated electrophoretically the transport of small ions such as KCl in the buffer solution through the fluctuating pores in the lipid bilayer membranes formed by interaction with the local anesthetic under the negative applied membrane potential. The current pulses also contained actual transport of charged tetracaine together with the transport of the small ions. The amplitude and the duration time of the electrical current generated by adding the local anesthetics were dependent on the type of the lipid, the applied voltage and its voltage polarity.     

Photoelectric response of purple membrane fragments adsorbed on a lipid monolayer supported by mercury and characterization of the resulting interphase

Purple membrane (PM) fragments were adsorbed on a dioleoylphosphatidylcholine (DOPC) monolayer supported by mercury to investigate the kinetics of light-driven proton transport by bacteriorhodopsin (bR). PM fragments were also adsorbed on a mercury-supported triethyleneoxythiol (TET) monolayer. On both monolayers, the light-on current exhibits a finite, potential dependent stationary component that decreases linearly with a positive shift in the applied potential. The light-on and light-off capacitive photocurrents were interpreted on the basis of a simple equivalent circuit, which accounts for the potential dependence of the stationary light-on current. The potential of zero stationary current is about equal to +0.010 V vs. saturated calomel electrode (SCE) on DOPC-coated mercury. The absolute potential difference across the PM fragments adsorbed at this applied potential was estimated on the basis of extrathermodynamic considerations and amounts to about +260 mV; it compares favorably with the value, +250 mV, of the transmembrane potential of zero stationary current across an oocyte plasma membrane incorporating bR [Biophys. J. 74 (1998) 403.]. The effect of the proton pumping activity of photoexcited PM fragments on the electroreduction kinetics of ubiquinone-10 incorporated in the DOPC monolayer underlying the PM fragments was investigated.     

The study of terbium generated bacterirhodopsin

The localization of Terbium (Tb³⁺) cations binding to deionized bacteriorhodopsin (bR) has been studied by using spectroscopic methods. It was found that adding Tb³⁺ cations to deionized bR affects the fluorescence lifetimes of tryptophan (Trp) in bR, the wavelength of fluorescence peak shifts “blue” and the peak value of fluorescence decreases. It was also found that adding one Tb³⁺ cation to deionized bR can restore the purple state from its blue state obviously. The measurements of absorbance, fluorescence and lifetime of fluorescence also show that when more than three Tb³⁺ cations are added, no further changes can be found. It is suggested that one Tb³⁺ specific binding site for the color-controlling is located on the exterior of the bR trimer structure to negatively charged lipids near Trp-10 and Trp-12. Three Tb³⁺ cations binding per bR is needed for the regenerated bR.     

A ROLE FOR MENADIONE IN THE PURPLE MEMBRANE PROTON PUMP?

Abstract— It has been assumed that proton pumps such as purple membrane lack redox loops. However, purple membrane does contain an electron carrier. Kates et al. (Meth. Enzymol. 88,98–1 111, 1982) reported the presence of 1 mole of vitaminMK–8 to 6 mol of bacteriorhodopsin among the nonpolar lipids. Is this quinone functionally important in the proton pump mechanism? Proton pumping rates were measured with lipid-free bacteriorhodopsin reconstituted in vesicles to which varying amounts of vitamin K₁ were added. With soybean lipids, in the presence of tetraphenyl boron, the pump quantum yield was 0.04H⁺/photon. This result was independent of the amount of vitamin K, added over a range of 0 to a 100-fold mole ratio to bacteriorhodopsin. A similar result was obtained with H. halobium lipids. The pump quantum yield in vesicles is much less than reported for membrane sheets and whole cells. The results support the conclusion that a vitamin K Q-cycle is not involved in the purple membrane proton pump.     

Engineered-membranes: A novel concept for clustering of native lipid bilayers

A strategy for clustering of native lipid membranes is presented. It relies on the formation of complexes between hydrophobic chelators embedded within the lipid bilayer and metal cations in the aqueous phase, capable of binding two (or more) chelators simultaneously Fig. 1. We used this approach with purple membranes containing the light driven proton pump protein bacteriorhodopsin (bR) and showed that patches of purple membranes cluster into mm sized aggregates and that these are stable for months when incubated at 19 °C in the dark. The strategy may be general since four different hydrophobic chelators (1,10-phenanthroline, bathophenanthroline, Phen-C10, and 8-hydroxyquinoline) and various divalent cations (Ni²⁺, Zn²⁺, Cd²⁺, Mn²⁺, and Cu²⁺) induced formation of membrane clusters. Moreover, the absolute requirement for a hydrophobic chelator and the appropriate metal cations was demonstrated with light and atomic force microscopy (AFM); the presence of the metal does not appear to affect the functional state of the protein. The potential utility of the approach as an alternative to assembled lipid bilayers is suggested.